Jaguar EZ-alpha: Instructions and manual in Russian

Attention!

This product is not available for installation, try choosing something from the current offers:
Jaguar EZ-alpha car alarm is a security system with two-way communication. It is controlled by a key fob communicator with an LCD display in a rubberized case that reduces slipping and protects it in the event of a fall. Allows you to arm a car with a running engine and control up to 5 zones in a protected facility. The anti-theft properties of the system are enhanced by two engine locks and an immobilizer function

This review will talk about how to use a signaling device called Jaguar TEZ B. Its other name is Jaguar EZ B or simply EZ Beta. Despite the large number of names, the EZ B alarm is simple to use. Of course, all connections and basic settings must already be completed. And here we look at how to operate the system, including if it is equipped with autostart. Enjoy reading.

This security system...

Page 6

Image
Text

This security system (car alarm) is a complex electronic device.

Installation, connection and configuration of the car alarm are described in detail in the “Installation Instructions” and can be carried out by the consumer in full independently.

However, the manufacturer strongly recommends that you entrust the implementation of the specified complex

works certified according to GOST R 51709-2001 (OKUN 017613) service center, which specializes

is planned for the installation of alarms and/or additional electronic equipment in cars

niya, (hereinafter referred to as a certified service center).

The car alarm is intended for permanent installation on a vehicle with power

tion from its on-board 12 V DC voltage, the negative pole of the battery is connected to the vehicle ground.

Before installing a car alarm on a car, first connect all the wires to it in test mode, make sure that all connections are made correctly, connect power from the battery

battery and make sure the car alarm is working properly.

If installing a car alarm requires drilling holes or any other modification to the factory

parts of the car, be sure to first consult about the correctness of such

intervention in the design at the nearest dealer.

Never install the car alarm central unit where it will become very hot, for example from direct sunlight or hot air coming from the system

car heating. Also avoid places where the central unit of the car alarm and its components

The components will be subjected to strong vibration or become exposed to dust or dirt.

Use only the fasteners included with the car alarm installation kit.

In this case, the installation will be reliable and safe. The use of parts not included in the car alarm installation kit may lead to disruption of its normal operation.

When washing a car, it is unacceptable for water and detergents to get on the surface or inside the central unit of the car alarm, on its components (siren, sensors, antenna module, limit switches), as this can lead to damage to the car alarm. To ensure moisture

To ensure safety, it is advisable to initially install car alarm components in places inaccessible to the flow of liquids and splashes, and if necessary, take precautions during washing

or cover (wrap) the components with readily available household waterproof material, such as

polyethylene film, etc.

Never insert any objects into the central unit of the car alarm or its components to avoid damage to the electronic units and systems.

In the event of a suspected breakdown, do not try to open the body of the car alarm (its components) yourself, and please avoid entrusting diagnostics and/or repairs to incompetent persons.

persons. If the car alarm is faulty, contact a certified service center.

Cleaning. Do not attempt to clean the key fob or other car alarm components with

any aggressive liquids, solvents or chemicals, as this may cause

deterioration of its appearance. For cleaning, use a clean, dry cotton cloth (soft

forge a brush).

Due to the constant work to improve car alarm systems, increasing its reliability and

improving performance characteristics, minor changes can be made to the design

changes not reflected in these Instructions.

RULES FOR THE SAFE USE OF CAR ALARMS

JAGUAR EZ-a “Instructions for use and installation of the system”

Differences between “EZ” series alarms

When buying a car, you should worry about its protection and safety. The Jaguar car alarm will help the car owner with this.

It has already established itself as one of the most reliable car alarms. In addition, it is one of the leaders in the security systems market.

About the manufacturer

Jaguar was founded in 1922 in Britain. The company produces cars of various capacities and branded products - car alarms, clothing, accessories.

This brand appeared in Russia in 2006 and has established itself as a very reliable vehicle, and car alarms from this company have become one of the most popular on the Russian market.

Jaguar car alarm reviews: pros and cons

The advantages of this car alarm are the following:

great functionality;
relatively low price;
availability of additional functions;
Beautiful design;
the presence of several security zones.

TRANSMITTER SYSTEM Buttons…

Page 9

Image
Text

FUNCTIONS OF SYSTEM TRANSMITTER FOBS

Buttons 3 + 1

♦ Selecting the key fob alert mode (press and release the buttons and

Buttons 3 + 2

♦ Quickly set the key fob timer (press and release the * and P buttons simultaneously)

PURPOSE OF THE BUTTONS OF THE ADDITIONAL (SINGLE-SIDED) KEY FOB

Button 1

♦ Turn on/off security with confirmation sounds (press and

let go)

Button 2

♦ Arm/disarm with long siren signals

Button 3

♦ Unlocking the trunk (press and hold for 3 seconds)

Button 4

♦ Silent security on/off (press and release) ♦ Channel 2 (press and hold for 3 seconds)

Buttons 1+3

♦ Disabling the sensor by levels (press and release the buttons and

Buttons 1+4

♦ Valet service mode (press and release buttons and N)()

Buttons 3+4

♦ Anti-robbery mode (with the

ignition, simultaneously press and release the Mi and N){) buttons ♦ Recording a key fob in programming mode

PROGRAMMING BUTTON I OF THE KEY FOB TRANSMITTER WITH TWO-WAY COMMUNICATION

Purpose of the button

double-sided key fob is programmable and can be changed by the owner himself

car an unlimited number of times.

Note: For ease of use of the alarm system, it is recommended to program this
button to turn the security mode on/off.
Programming is carried out in the following order:

1. Quickly press the key fob button two or more times to move the cursor clockwise or

counterclock-wise. To change the direction of cursor movement, take a short pause (1-2 seconds) between pressing button 3 of the key fob.

2. By pressing the key fob button, set the cursor to the position corresponding to the desired command

(for example, the command to turn on / off the security mode with sound signals 'chZU)

3. Press the ^Ф^ button of the key fob and hold it pressed for 6 seconds until 2 appears, and then

3 more beeps.

4. Press the button

key fob to activate the selected function.

In the future, when using the alarm, briefly press the button

key fob will lead to

execution of the command assigned to it (turning on and off the security mode). At the moment of pressing

button, the icon corresponding to the programmed function will light up.

JAGUAR EZ-a “Instructions for use and installation of the system”

Jaguar alarm tez a operating instructions

Signaling capabilities

Standard features that various modifications of the Jaguar anti-theft system have:

Engine blocking is remote.
Arming and disarming is silent.
Control of door opening while driving - yes.
If the key fob is lost, it is possible to disarm it.
Calling the car driver when the security system is activated.
The system is protected from radio interference.
There is a panic mode.
After switching on, the alarm performs self-diagnosis.

Main features of the Jaguar system

The set of basic functions of the Jaguar alarm system is completely standard. The following possibilities can be highlighted:

Activation of the security mode, which can operate completely silently and transmit an alarm signal only to the car owner’s key fob.
Possibility of wireless engine blocking.
Possibility to turn off the alarm even if the standard key fob is lost.
Ability to control door locks while the vehicle is moving.
The function of calling the vehicle owner in case of an alarm.

In addition to the above functions, the manufacturer indicates some other alarm features that relate specifically to the security mode. In particular, we are talking about functions such as:

Dual dialog code with reliable protection against interception.
Intelligent control of system operation and high-quality protection against radio interference.
Excellent system response speed – response time from 2 milliseconds.
Possibility of control from anywhere in the world. It works if an additional GPS transmitter is installed.
Up to seven independent security zones.
Panic mode.
Engine blocking mode.
Silent disarming and arming.
Ability to disable security sensors separately by zone.
Self-diagnosis when the security mode is turned on.

Warranty and service

The warranty on Jaguar alarms is given by the manufacturer for a period of one year. However, there is always the opportunity to extend the warranty period of service for additional money. Considering that the security systems of this brand belong to the budget segment, extending the warranty makes sense.

As for service, there are authorized Jaguar centers throughout Russia and the CIS countries. In addition, clients have access to 24/7 telephone support from anywhere in the world.

Instructions for use

You can install a Jaguar car alarm yourself. Before installing it yourself, you should study the connection diagram included in the instructions for the system.

Installation

The system is installed using conventional installation tools. Before installation, you should choose where the sensors and main elements will be installed:

control unit (CU) - installed in the cabin behind the instrument panel;
siren - the best place to install it is the engine compartment;
limit switch - installed on a protected surface of the car body;
shock sensor - install in the cabin, as close as possible to the longitudinal axis of the car body;
The Jaguar security system reception sensor together with the antenna are mounted on the windshield;
the place for the secret “Valet” button is as inaccessible as possible, so that it is not possible for a stranger to quickly find it;
The wires supplying the system should be installed so that they are away from metal parts to prevent interference.

It should be installed according to the diagram. The diagram, as a rule, has markings with different colors, which are designed to ensure correctness and ease of connection.

Setting up a Jaguar car alarm

The alarm function is triggered either by pressing buttons on the key fob, or by settings, however, similarly with the Leopard alarm key fob.

Purpose of key fob keys:

Button No. 1 is programmable. Serves to start and stop the motor remotely, within a range of action (usually for systems of this company - 1.5 km)
Button No. 2 is used to open the trunk. Selects cursor movement.
Button No. 1 and No. 2 activate the panic and search mode.
Button No. 3 has several purposes: controlling the cursor on the display, turning off the alarm, setting a timer, time, etc.

The system includes a key fob with one-way communication to control the security system.

Setup and launch

Installing the alarm yourself is not recommended; it is better to do it at service stations. Otherwise, the settings may be made incorrectly, which can lead to damage to the security system. But if you want to configure the Jaguar yourself, then you will need to reprogram the alarm:

Turning headlights on/off. When turning on the headlights, hold the handle in manual mode.
Enable programming mode. Turn the key inserted into the ignition to position 1, but do not start the engine. Blink your taillights 4 times. Light and sound indication will indicate that programming can begin.
Key fob programming. On each remote control, press the Open/Close button 5 times. If you have two key fobs, press one 3 times, the other 2 times.
Disable programming mode. The sound indication of the car will serve as a signal to exit the programming mode and correctly configure the security system.

Next, you will have access to remote start of the car engine if you keep the gear shift knob in neutral and the hood is closed.

First, let's find out how to start the car with the key fob. For this purpose, there are special buttons for turning on with a lock icon with a key and “Check progress”. Press and hold the lock button, then press "Check progress". An indication will appear on the display and the engine will start.

To remotely extend engine operation, you should press these buttons regularly. The engine operating time will be increased by 5 minutes.

To turn off the engine remotely, follow the same steps. Hold the button with the lock icon and click “Check progress”. This way it is possible to turn off the car remotely if necessary.

Appearing faults

When operating the Jaguar alarm system, the following malfunctions may occur:

Incorrect response (false). This usually happens due to the high sensitivity threshold of the shock sensor. When setting it up, you slam your palm on the car body and set the value at what impact force you need to turn on the siren.
Incorrect installation of alarm components.
The key fob batteries are low.
The key fob itself has failed.
The antenna is faulty.
The wiring is broken.
The car battery is discharged.
System settings software failure.

If a malfunction of the security system is detected, it is recommended to fix it as quickly as possible.

The alarm system is not 100% protected against theft or burglary. There are special code grabbers that steal the alarm code for subsequent hacking of the car.

Photo gallery

Photos of Jaguar alarm packages with auto start are presented below.

Jaguar EZ-10

Jaguar EZ-8

Jaguar EZ-Beta

Pros and cons of anti-theft Jaguar

The Jaguar security system product line is wide. But they all have the following advantages:

the presence of a monitor showing the state of the machine;
good burglary protection;
the price range is wide, you can buy cheaper and more expensive models;
warranty period;
The kit includes instructions for installation and proper operation;
the system meets international standards.

According to reviews, there is only one drawback - the range of the key fob is incorrectly indicated. Some key fobs do not work at a distance of up to 1.5 km.

Possible faults

During operation the following are possible:

incorrect operation due to the high sensitivity of the installed shock sensors;
incorrectly installed alarm components;
the batteries on the key fob have become unusable;
key fob is broken;
antenna is faulty;
wiring is damaged;
battery is low;
system settings failure.

The safety of the vehicle depends on the serviceability of the signaling system.

How much does a Jaguar alarm cost:

Jaguar XJ-777 (price from 9,500 rubles).

Jaguar EZ-Three (price from 10,000 to 11,800 rubles).

Jaguar-Ez-ultra (cost from 12,000 to 15,000 rubles).

How to install

The alarm installation process includes the following steps:

Installation of the head unit. This part of the system is located in the cabin. It is necessary to choose places that are inaccessible to criminals. The housing is secured using double-sided adhesive tape or self-tapping screws.
Siren installation. The bracket is fixed in a free space in the engine compartment. The part must not come into contact with the cylinders or the intake valve. The siren is fixed on the bracket with the horn down. The wires are connected by soldering, bringing the connections into the interior.
Placement of the sensitivity sensor. The part is fixed to the partition separating the engine compartment from the passenger compartment. Do not place sensors on plastic or rubber surfaces. Controls must be accessible to the user.
Installing the antenna module. The transceiver is installed on the windshield. Before fixing the device, the surface is cleaned of dirt and degreased. The cables are pulled to the head unit under the interior trim.
Emergency button placement. The element requires hidden installation; it can be hidden in standard wiring harnesses. It is recommended to place a toggle switch near the service key to enable the “Anti-robbery” option.
Installation of limit switches. Parts are inserted into technological holes on the hood and doors. The cables are pulled towards the processor unit.
Connecting system components. The modules are connected to the main unit in accordance with the diagrams attached to the instructions.

Advantages and disadvantages

Advantages of Jaguar alarms:

Rich functionality. In their reviews, consumers note that Jaguar alarms have many useful options that make it easier to control not only the system itself, but also other components of the car.
Affordable price. You can buy an alarm system with auto start at a price of 5 thousand rubles and more. The cost will depend on additional features.

The disadvantages include the weak body of the key fob. If dropped regularly, the device quickly breaks down, and over time its buttons begin to sink. To prevent damage to the communicator, you can install it in a case. But it won’t help with buttons sticking.

TheAAG999 channel talked about the capabilities and disadvantages of Jaguar security systems.

Specifications

The Jaguar Tez-B alarm system has the following technical characteristics:

the frequency of the radio channel used to transmit and receive data is 433.9 MHz;
the distance at which commands are sent stable is 600 m;
the range of action of the main key fob when receiving messages is 1.2 km;
type of microprocessor device power source - vehicle on-board network with a voltage of 12 V;
the amount of current consumed by the system in security mode is 25 mA;
number of key fobs attached to the head unit - 4;
moisture protection class - IP54;
operating temperature range - -40…+85°С;
main pager battery type - AAA batteries;
data encoding method is dynamic;
The battery life in the main key fob is 4 months, in the additional one – up to 2 years.

Equipment

The anti-theft kit includes the following elements:

processor unit protected by a black plastic case;
main key fob with 3 buttons, LCD display and two-way communication;
a spare communicator with 4 buttons and an LED element (the design of the device does not imply the presence of a display);
instructions for installing and configuring alarms;
transceiver module with adapter, owner call button and air temperature sensor;
shock and body position change sensor with cables for connection to the processor unit;
siren with bracket for fixing;
LED indicator of the anti-theft complex status (with cable and connection block);
Emergency shutdown key for protective mode with installation wire;
toggle switch to enable the “Anti-robbery” option;
limit switch for trunk or hood;
installation cables with connectors;
information stickers;
warranty card.

Key Features

Main functions of Jaguar alarms:

Possibility of activating the protection mode with or without sound and light accompaniment.
The ability to notify the car owner about events recorded by the security system. The key fob with feedback displays data about activated security zones.
Protection against robbery, this function is called Anti-hijack. She is intelligent. The essence of its action is to block the motor when the car is forcibly seized. When criminals force the car owner out of the car, the alarm system can understand this by analyzing the operation of the sensors installed on the brake pedal and handbrake lever. After the car moves to a safe distance from the car owner, the engine lock will be activated.
The consumer can independently select the signal that is played when the alarm is activated.
Seven independent security zones provide more reliable protection.
Disabling the protection mode is carried out in two stages.
The ability to warn the car owner that he forgot to lock the doors before driving.
If necessary, you can connect the steering horn to the car siren.
Automatic start. This option will ensure the engine warms up in the cold season and will be useful for those who are constantly late. Now you don't have to waste time warming up the car.
The memory of the microprocessor module allows you to record information about events that occurred in the operation of the security complex. Even after disconnecting the battery, information about this will remain in the memory.
The consumer has the opportunity to additionally connect digital relays used to block the power unit.
The consumer has the option of additionally connecting a GPS beacon to the signaling system.

Equipment

The alarm is supplied in a cardboard box, the set consists of the following components:

main system module;
main key fob equipped with three buttons, two-channel communication and a monochrome LCD screen;
an auxiliary key fob equipped with four buttons, a single-channel operating mode and a control indicator for command transmission;
a transceiver unit, which includes an antenna, a driver call button and a sensor for measuring the temperature in the cabin;
shock measurement sensor complete with wiring harness;
non-autonomous siren;
control light diode equipped with a wire and plug for connection;
setting button, complete with cable;
additional anti-robbery button, equipped with a connecting harness;
switch installed under the hood or trunk lid panel;
a set of Molex type wires intended for switching the main module;
additional Molex harness, equipped with wires of increased cross-section for the car remote engine start system;
Molex harness for connecting the alarm system to the central locking control unit;
warning stickers (two pieces);
Jaguar TEZ B instructions for use, configuration and installation;
brief reminder;
Warranty service form.

General view of the Jaguar TEZ Beta set

Leave a review about the product

If you have experience purchasing and using a specific product, please share information about it with other AutoPulse.ru customers - leave your review.

Describe why you liked the product or, conversely, what problems you encountered when using this product.

Your review will be published some time after it has been verified by a moderator.

Attention! We do not publish:

reviews are too short and uninformative
reviews written in CAPITAL letters
reviews containing profanity
reviews not related to the consumer properties of a particular product
reviews containing links to other sites
product reviews that mention specific stores