Life hack: low beam (high beam) lamp of a Lada Priora car

Automotive low and high beam lamps used on the Lada Priora in the restyled and pre-restyling versions are almost the same. The difference is in the layout of the headlight itself on the Priora.

The lamp used in the dimensions of early cars has disappeared. The rear lights are distinguished by a diode insert in the brake lights; now there is a circuit with diodes, but before there was a light bulb.

Turn indicators, daytime running lights, low and high beam headlights, side lights, fog lights and reversing lights are very helpful to both the driver and other road users.

For example, the switched-on low beam lamp in a Lada Priora will indicate, for pedestrians and other drivers, the dimensions of the car and help to approximately determine the speed of movement. Lamps for a Lada Priora car should be selected with special meticulousness, with a long service life and moderately bright light.

For example, in the headlights of a Lada Priora you can find from 4 to 5 different lamps at the front. Their markings are indicated by the factory, and it is not difficult to find light bulbs - they are manufactured by several manufacturers, from which you can choose. The power of a good headlight with mirror-clear illumination should exceed 58 W, otherwise visibility at night will remain the same, but I would like to give Priora the kind of lighting with which it would be pleasant to drive.

What standard lamps are used in Priora headlights?

The Priora headlight unit is equipped with:

low beam lamp;
high beam/running light lamp;
turn signal lamp;
side light lamp.

Designations

Low beam, for example, is marked 55H7, where 55 is the power in Watts, and H7 is the designation of the base;
The main beam is designated 55N15;
turn signal – 21PY21W;
side light – 5W5W.

The lamps are in the headlights in a single unit, and the headlight unit is not always replaced - only the bulbs are changed. And not in vain - the factory headlight produces a cloudy light. Prior owners try to install the best lamps so that the headlights shine longer.

Main conclusions

For high beams on a Lada Priora, depending on the year of manufacture, lamps with a power of 55 watts are used, with two types of base:

Pre-styling - H1.
Restyled - H15.

Among reliable, high-quality and durable lamps, the most popular models are Bosch Gigalight, Vision and LongLife EcoVision from the Philips line (for pre-restyling), and Philips Standart, Original Line and Cool Blue Intense from Osram (for restyled ones). When replacing burnt-out ones with new ones, you must strictly follow the instructions and follow safety rules.

If you have personal experience in replacing high beam lamps on a Priora, taking into account the characteristics of a particular model, share it in the comments.

Layout of the restyled version

In the Priora, little has changed after restyling - small details invisible to the eye, the center console, the dashboard. The headlights have also changed - they have become quite a bit larger. The principle of their design has remained virtually unchanged, except that there is now one plug at the back to isolate the contacts.

The design of the headlamp unit has become more complex: now in place of the usual high beam lamp there is a light consumable, combined with daytime running lights, which switches between operating modes. PTF fog light bulb, everything is also mounted depending on the configuration.

Table of the best models and manufacturers

Among the highest quality, reliable and durable (400-1600 hours) lamps for the Priora car, models from manufacturers such as Osram, Philips and Bosch stand out. Let's consider their features and characteristics for the pre-restyling and restyled versions of the Lada 2170.

Pre-styling Lada Priora

Name	Manufacturer country	Characteristics and Features	Rating on a 5-point scale
Bosch Gigalight	Hungary.	Fairly bright white light. 120% power compared to standard.	5
Philips Vision	Germany-Poland.	They are characterized by sufficient quality at an optimal cost. · Service life 400 hours. · Luminosity 1700 lm. · 30% better visibility compared to conventional high beam lamps.	4
Philips LongLife EcoVision	Poland.	Good quality at low price and durability. · 1.5 thousand hours of operation. · Brightness 1570 lm. · Protection from vibrations and thermal changes.	4

Restyled Lada Priora

Name	Manufacturer country	Characteristics and Features	Rating on a 5-point scale
Osram Cool Blue Intense	Germany.	Short service life, but high-quality blue color. · 200 hours. · 4200K. · 1350 lm.	4
Philips Standard	Germany-Poland.	Lighting characteristics are close to the standard version. · 1700 lm luminosity. · 400 hours of operation. Read also: Replacing rear shock absorbers (shock absorbers) of a Chevrolet Lacetti	4,5
Osram Original Line	Germany.	Inexpensive, high-quality lamps with a good service life. · 1400 lm brightness. · 500 hours of work. · Up to 130% increased visibility.	5

How to change the low beam light bulb on a Priora

First of all, it is necessary to remove the battery, otherwise access to the headlight will be limited. And even if you stick your hand inside, working under the hood will be uncomfortable. The process of replacing a light bulb is described in several steps:

Remove the rubber cover, the outermost one (it is located closest to the front fender of the car). At the same time, try to be careful with fastening the headlight housing;
Disconnect the block with contacts from the lamp itself;
We press the latch and remove it from engagement with the hooks carefully and without sudden movements;
We take out a 55H7 light bulb;
We do everything in reverse order with the new lamp.

It is recommended to do the entire mechanism according to the clockwise principle - first remove the old light bulbs from both sides, and then install new ones. Lamps used at the factory do not perform very well, even in terms of durability, and may require repairs a couple of months after purchase.

Size of wipers on VAZ 2114

Published: 04/06/2020
Spread the love

Spread the love Wipers for VAZ 2114 Wiper blades for VAZ 2114 - 2115 - 2008 - 09 - 99. Which wipers are better for VAZ 2114 Wiper blades can be divided into three types: framed, frameless and hybrid. VAZs are equipped with frame windshield wiper blades from the factory. Frame wipers fit the windshield better and are less likely to scratch...

Size of wipers on VAZ 2114 Read more »

Replacing Priora high beam lamps

It all starts again with removing the battery - you can’t do without it now. The high beam lamp is located a little deeper and is not easy to get to. The sequence of actions when replacing a high beam lamp is as follows:

We disconnect the rubber cover (it is larger than the one designed to protect the low beam lamp);
Disconnect the block with wires;
Unclench the spring clamp and disengage it from the reflector hooks. We release the light bulb.
We remove the lamp socket from the headlight unit.

In fact, everything is simple: they opened the lid and took out one lamp. However, such minor operations will put a lot of strain on your wrist and palm - don’t forget to warm up, otherwise the new part may treacherously slip out of your hand when you don’t expect it.

Useful tips

When choosing components, check their characteristics with the data provided by the manufacturer - the indicators must meet the specified standards.
Mechanics strongly recommend replacing lamps in pairs. This will allow you to maintain the same glow of the headlights and will help to avoid burning out an unreplaced lamp while driving.
At the first sign of a malfunction or difficulties with the fuse, contact a service center or replace the lamp yourself.
When installing xenon or LED lamps, you will need to install fog lights with halogen lighting elements. This is necessary to improve visibility in bad weather conditions.
If the low beam does not work after replacing the bulbs, check the fuses. They are located in the instrument panel to the left of the steering column.

Sources

https://carfrance.ru/kakie-lampochki-stoyat-v-fare-blizhnego-sveta-na-priore/
https://LadaKalina.club/repair/tsokol-lampochki-blizhnego-sveta-lada-priora
https://RetroTruck.ru/obsluzhivanie-avto/lampochki-v-tumanki-priora.html
https://PolomkiAuto.ru/rekomenduemye-proizvoditelem-lampy-primenyaemye-v-lada-priora.html
https://svetilnik.info/avtomobilnyj-svet/lampa-dalnego-sveta-priora.html
https://avto-o.ru/ts-i-remont/kakie-lampochki-stoyat-na-priore.html
https://LampaExpert.ru/avtomobilnye-lampy/neispravnosti/lampa-bliznego-sveta-priora
https://LampaExpert.ru/avtomobilnye-lampy/protivotumannye-fary/kak-ustanovit-na-prioru
https://tune-priora.ru/obslujivanie/lampy-primenyaemye-v-lada-priora-i-ih-zamena.html
https://smt-gps.ru/remont-i-tyuning/razmer-protivotumannyh-far-priora.html
https://av-1.ru/novosti/cokol-v-tumankah-priora.html
https://avtobak24.ru/lampochka-blizhnego-sveta-priora-kakoj-cokol-v-farah

Replacing lamps in Priora taillights

Replacing the rear light bulbs is complicated by the fact that the combination unit inside supports the operation of the parking lights and brake signal. But it all starts just as simply, when replacing the bulbs in the rear headlights of the Priors, as well as the front ones:

Remove part of the upholstery opposite the headlights;
Unscrew the screws that support the protective housing of the rear light. In Kalina, there were nuts in place of the screws, and unscrewing them was even more fun - they fell into a huge gap and were lost in the car body forever;
Turn the brake light and clearance holders counterclockwise. Do not remove the socket, take it out together with the light bulb;
It is easy to press down the lamp, turn it clockwise and remove it from the socket with a slight movement (it will almost fall out on its own);
Carry out the operation in reverse order.

All you have to do is remember about the combination headlight - remember where each lamp was located, so that you don’t confuse anything during installation. With the rest of the light bulbs, everything is different - in addition to the ground (black wire), wires from the ECU are connected to them. Thus, the “foglights” correspond to the red wire color, the turn signal indicator – blue, the green light is assigned to the reverse lamp.

What is the difference between PTF for Priora 1 and Priora 2

In fact, the Lada Priora does not have any generations or numbers. In 2013, this car was restyled, which significantly changed the appearance of the Priora, but this did not make it the second generation. As for PTFs, after restyling they did not change, just as the types of lamps used in them did not change. The only exception is the Lada Priora Restyling SE, which received new PTFs, but with the same H11 lamps.

Third-party developers also produce LED versions of such headlights, and some of them can additionally serve as daytime running lights.

PTF with LED daytime running lights for Priora SE

That's probably all. If you carefully read the article, you will be able to equip your Priora with PTF yourself, and, if necessary, change the light bulb in the headlight.

Dorestyling

The life of the owners of pre-restyling cars was darkened by the fact that, in addition to the reduced service life, even then it was darkened by the fact that when replacing some light bulbs it was necessary to remove the socket along with the bulb - this, for example, happened when the owner wanted to replace a side light bulb. Owning a Priora became increasingly expensive; rarely did anyone think about buying another headlight - developed by other companies. Installing light bulbs from foreign manufacturers solved the problem of poor lighting well and for a long time.

Comments

TOP materials of the week

Who services your Lada Priora?

Lada.Online

Lada (“Lada”) is a brand of cars produced by JSC AVTOVAZ. Previously, it was used only for export cars, and for the domestic market, cars were produced under the Zhiguli brand. In 2004, the management of AVTOVAZ announced the transition to the Latin alphabet for the official spelling of the names of all cars produced by the plant: Lada - instead of "VAZ" and "Lada".

Lada.Online is the largest Russian-language automotive resource with a daily audience of thousands, which is dedicated primarily to cars of this brand, the domestic automotive industry and the automotive world in general.

This site is not the official LADA website.

Source

Turn

The turn signal signal is located the highest (in relation to the hood), and to remove it you don’t even have to wrap your hand under the hood.

Remove three screws and a self-tapping screw from the plastic cover, pry it up with a flat-head screwdriver and remove it;
Turn the cartridge strictly counterclockwise;
Remove the cartridge;
It is easy to press down on the lamp and rotate it counterclockwise until it begins to fall out of the socket.

When choosing a turn signal PY21W (Voltage 21 W), you should be careful - a lamp with a similar marking - P21W - will not have orange, but colorless glass, and will not be suitable as a turn signal.

Oil filter, air Renault Logan article

Published: 10/21/2020
Spread the love

Spread the love Oil filter Renault Logan 1.6, 1.4 article number Renault Logan exists for 2 generations - the first, 2004-2013, the second, 2012 - present. These car models have both gasoline and diesel engines in their own reserve. In the Russian car market, Renault Logan is officially produced only with gasoline power plants, volumes of 1.4 and 1.6 liters. Outside...

Oil filter, air filter Renault Logan article number Read more »

Difficulties with replacement

The most convenient thing is to replace the turn indicators. In other cases, you have to twist very tightly and stand in this uncomfortable position for a couple of minutes until the job is done. This is not very convenient, because the light bulb is a consumable, but the engineers could make sure that replacing it was as easy as the plastic steering wheel insert on the “ten”.

Another inconvenience is that you have to remove the battery. Nobody argues that it is better to turn off everything before starting work. But the battery is removed for reasons of rationality - the battery takes up a lot of space and interferes with working with your hands while you stand in an awkward position.

Diagram of correct installation of fog lights

On Priora, fog lights are installed according to the same rules as any other car. Installation is done at a height of less than half a meter from the level of the road surface. Low-mounted fog lights are out of the wet condensation zone and can actually significantly improve visibility.

If you install PTF on the roof of the trunk (as owners of jeeps often do), then they will turn out to be completely useless, especially during fog, rain, or a snow or dust storm.
Therefore, a more effective method was and remains the installation of fog lights under the bumper (for outdated metal structures) or directly into it (for the latest generation metal structures). Installation of fog lights
The fog lights that you install on your Priora must comply not only with all traffic regulations, but also with UN standards. The latest configurations correctly state that any fogs must distribute light at a wide angle and have a correctly defined upper border. The dispersion index should be 70 degrees horizontally. Only a device with such features will create an anti-fog effect.

Why the headlights don't light up - reasons

The most common reason for headlights not working is a burnt out light bulb. Its service life is indicated in hours on the packaging. For a low beam bulb, this limit can be 400 hours of operation. The second extremely possible reason could be a wiring malfunction due to water leakage, or the wire simply frayed. This problem is already more serious, because you will have to fuss with it much longer than with a regular replacement of consumables.

Often, car enthusiasts are too lazy to change light bulbs, driving out onto the road in “one-eyed” cars. This is very unsafe - it is recommended that immediately after a malfunction is noticed, you go for a spare part to replace a new lamp.

Does it make sense to wash your car in the cold?

Published: 01/13/2019
Spread the love

Spread the love Washing a car in winterContents1 Washing a car in winter1.1 Before washing1.2 After washing1.2.1 We are in VK Even in cold weather, you can wash your car. However, be careful not to damage the vehicle as well as yourself! You can wash your car even at a few degrees below zero without any problems. Washing a car in open car washes is associated with...

Does it make sense to wash your car in the cold? Read completely "

Criterias of choice

The low beam of VAZ-2107 (Lada Priora) cars is implemented using halogen lamps. They have an H7 base and a power of 55 W. Similar lighting devices are produced by all car lamp manufacturers, both European and those from Southeast Asia. The most reliable companies producing H7 light bulbs include:

A Dutch company whose history goes back 120 years. The range includes a large number of different technical devices. Lighting devices make up only a small part of the total production volume. Famous for quality and reliability. Today the company has factories in many countries around the world;
Large manufacturer of automobile lamps from Germany. Initially, the company was a division of the Siemens concern. The production of lighting devices is the main specialization of the company, which has achieved great success in this direction. The company's subsidiary, Neolux, which also produces lamps and lighting equipment, is actively operating;
Another German company whose age exceeded 100 years. It produces a wide range of products; in addition to light bulbs, power tools and automobile accessories are widely known;
The company was founded in Germany in 1948. The production of electric lamps is the main direction of the company. All products undergo multi-stage quality control and have appropriate certificates;
Sho-Me. A large Chinese manufacturer of car lamps, accessories and other goods. Most xenon lamps are produced by this company;
MTF-Light. A Russian company that produces automobile lamps for the domestic market. Production facilities are located in South Korea. The products meet all international standards and are highly valued by users.

The above list is not exhaustive. It is difficult to list all the companies, and there is no point in doing so. New companies are constantly appearing on the market, offering their products to customers.