Today, the classic VAZ 2107 model is almost impossible to imagine without tinting. Every owner of this car is trying to make it more comfortable, and window tinting plays an important role in this matter. Of course, you can take the car to the nearest car service center so that professionals can do all the work. But this pleasure does not come cheap. Therefore, many car enthusiasts prefer to tint their “Seven” cars themselves. Is it possible? Yes. Let's figure out how this is done.
- About light transmission standards for tinted glass
- How to choose a tint film
- The process of tinting windows VAZ 2106
Preparatory operations
- Tinting of side windows of VAZ 2107
Video: tinting the side window of a VAZ 2107
- Video: forming a film for the rear window of a VAZ 2107
Required tools and materials
- Tinting film, for VAZ 2109 - at least 3 m.
- Baby shampoo or any high-quality detergent, at least 100 ml.
- Rubber scraper.
- A sharpened knife or blade.
- Sprayer in the amount of 2 pieces (needed to dilute the shampoo).
- Warm water.
- Dry wipes or lint-free cloth.
- Special hairdryer.
- Metal meter ruler.
- Assistant.
LLumar film
To quickly complete the task, the assistant will provide significant savings in time and resources, and will also significantly increase productivity. Prepare all this before starting work and your successfully tinted car is almost ready.
Which is better, painting the body or wrapping it?
There is no clear answer to this question. Each type has its own advantages and disadvantages. Let's look at some of them.
Car body wrapping
- In terms of time, pasting is faster than painting.
- The cost of pasting is less than painting.
- The emission of harmful substances during pasting is less than during painting.
- The film preserves the paintwork.
- It is impossible to cover everything; some body shapes are easier to paint.
Car body painting
- Painting is more expensive.
- It takes more time to paint.
- High-quality painting requires specialists; it’s difficult to do it yourself.
- The paint weighs more than the film.
- Possibility of repeated polishing.
- Any part of the body can be painted.
You can accept one of the options, but if the car is new, it is better to cover it with film. If the car is used, treat its body and paint it. The decision is up to the owner.
Tinting the rear of the car according to GOST
Great news for lovers of black tints. According to the law, there are no restrictions on tinting the rear windows of cars. You can apply any tint film to the rear hemisphere of a VAZ 2107, regardless of its ability to transmit light.
The tint film can be installed on the rear windshield without problems and does not damage the heating filaments. Also, the rear side passenger windows can be tinted with a pattern or inscription without violating the instructions of GOST.
Owners of a VAZ 2107 car often face problems with external design. A trip in the summer on a hot day turns out to be simply torture when the car does not have tinted side windows. The sun penetrates into the cabin and heats it to serious temperatures. Since air conditioning is not provided from the factory, the only salvation for passengers is to open all windows. But even this situation does not lead to the best consequences; drafts and the likelihood of illness arise. The only solution to this problem is window tinting. But many owners would say that the way around this situation is to avoid long trips on hot days. But here another problem opens up. Translucent glass attracts car thieves, especially the expensive items inside. To solve such problems, only tinting the windows of the VAZ 2107 can help.
Which car windows are allowed to be tinted? Before solving such problems, you need to find out which glasses are allowed to be darkened with film. According to the traffic police rules, tinting all car windows is allowed. But on the windshield and front side, the applied film will have to transmit at least 70% of the light. If it is more, then the fine is provided upon proof of the real one. The front glass is allowed to be darkened from above to a distance of no more than 14 cm. Therefore, when choosing a film, be sure to take these important points into account.
The photo shows the types of light transmission as a percentage in order to roughly guide the transparency of the material.
To tint the rear window of a VAZ 2107 yourself, you can additionally watch a video after reading the material for greater clarity of the procedure. If this is your first time deciding to tint your windows, then it’s better to use a cheaper material, so that if it doesn’t work out, you won’t be so sorry for the money spent. To properly tint the rear and side windows, you must follow these rules:
- The garage or work area must be absolutely clean and free of dust in the air.
- Preliminary preparation of tools that will be required to complete the work.
The following material is used for tinting:
- construction hair dryer;
- special solution for cleaning windows;
- spray;
- rubber scraper (forcing);
- scissors;
- microfiber cloth.
Let's get started
The sequence includes the following stages of work:
The procedure for tinting the rear window is completed; you need to wait three days until the film dries completely and install it in place. If everything is done correctly and there is no air or specks of dust left under the film, then even Chinese material will last for more than one season.
Darkening side windows
The procedure for darkening the side windows is even simpler than the rear one. It is also necessary to remove the material to be pasted and wash it clean. Further, everything according to the above scheme. The process of gluing side windows can be viewed on video on the Internet. In the video you can see more detailed aspects of darkening. After all the windows of the VAZ 2107 are darkened, it will take on the following appearance, as shown in the photo.
Important! When tinting windows, you need not only the correct sequence of actions, but also slowness, not being nervous and having a good mood, since this work is not easy and very painstaking.
Every business has its own shortcomings. In darkening, this is also indispensable; darkening the windows creates a problem that manifests itself at night and in the dark. The higher the percentage of darkening, the almost impossible it is to safely drive a VAZ 2107 in reverse. Anyone who darkened it already knows how unrealistic it is. But, if a material with a small percentage of darkness is installed, then visibility improves accordingly.
Do-it-yourself car window tinting is a great opportunity to improve the appearance of the car and protect the driver and passengers, both from prying eyes and from the bright sun. To carry out this operation, it is not at all necessary to contact specialists; this issue can be resolved on your own at home, which will help you save money and gain new skills and knowledge. It is important to prepare thoroughly and complete the work carefully.
The process of tinting windows VAZ 2106
Before starting work on tinting the VAZ 2106, you should select all the necessary tools and consumables. Here's what we need:
- paper napkins;
- soft plastic spatula;
- rubber roller;
- construction hair dryer;
- several sponges for washing dishes;
- sharp knife;
- spray;
- scraper.
Preparatory operations
If the owner decides to tint all the windows of his car, then he will have to carefully prepare the car for this operation.
- All car windows are cleaned of dirt using a pre-prepared soap solution. To prepare such a solution, you can use either laundry soap or regular shampoo, dissolving it in water at room temperature. The resulting solution is poured into a spray bottle and applied in a thin layer to the car windows. After this, the glass is washed with clean water and wiped with dry cloths.
- Now you need to prepare a new portion of soap solution (at least 3 liters). It will be needed to accurately adjust the film.
- Preparing the pattern. The film is applied to the glass, then a piece of the required shape is cut out of it. Moreover, it is necessary to cut the film so that there is a margin of at least 3 cm along the contour.
Tinting of side windows of VAZ 2107
After carrying out the preparatory operations, you can proceed directly to tinting, and it is best to start with the side windows.
- The side window of the VAZ 2107 is lowered by about 10 cm, after which its upper edge, which was covered with seals, is thoroughly cleaned.
Video: tinting the side window of a VAZ 2107
Tinting the rear window of VAZ 2107
The process of tinting the rear window of a VAZ 2107 is almost no different from tinting the side windows, with the exception of a few nuances.
- The main difference between the rear window and the side windows is that it is convex and large. Therefore, it is most convenient to do the work of tinting the rear window together.
- Apply a thin layer of soap solution to a clean rear window using a spray bottle.
Video: forming a film for the rear window of a VAZ 2107
Windshield tinting for VAZ 2107
The procedure for tinting the windshield of a VAZ 2107 is no different from the procedure for tinting the rear window described above. Only one nuance should be mentioned here: you should not cut off the stock of film around the edges immediately after gluing it to the windshield. It is necessary to let the tinting sit for at least three hours, and only then trim the edges.
By the way, there is an alternative way of tinting car windows without using film, which one craftsman told me about. He took caustic soda (NaOH) and dissolved ordinary soldering rosin in it so that the rosin in the solution was approximately 20% (when this concentration is reached, the solution turns dark yellow). Then he added ferrous sulfate to this composition. He poured it there until a bright red precipitate began to form in the solution. He carefully separated this sediment, and poured the remaining solution into a spray bottle and sprayed it on the windshield. According to the craftsman, after the composition dries, a very strong chemical film is formed on the glass, which lasts for years.
So, tinting the windows of a VAZ 2107 is a job that requires great care and does not tolerate fuss. You can do it yourself, but you can’t do it without an assistant. And of course, you need to use only the highest quality tint films.
Source
Advantages and disadvantages of using paint and film
Car tinting 2107, done by yourself using paint or varnish, will require more time both during direct application and during subsequent possible removal. To remove such tuning from the headlights, you will need to completely disassemble them. Car windows are usually not tinted with paint or varnish. Working with film is faster and does not require dismantling the lights, but it is better to remove the glass. Tinting headlights has one more feature: incorrectly selected material melts during operation.
The tinting of car windows or headlights should not exceed existing standards, otherwise the driver will be subject to an administrative fine.
After weighing the pros and cons, choosing a material, they determine its area of application: headlights or car glass, and get to work. Below are recommendations for those who do their own tinting.
Tinted rear and side windows
Each car has its own characteristics, and the VAZ 2106 is no exception. Unlike other models, the six, for example, has a curved rear window. That is why some craftsmen and car owners who do the tinting themselves prefer to remove it first. But it is possible to cover it with film without dismantling it.
Since 2106 has curved glass, the film can be glued in three longitudinal strips. To cut it accurately, it is advisable to first make a template.
But you can immediately cut out the required piece by simply applying the film to the glass. Another proven way to stick the material well on a curved surface is to heat it with a hairdryer.
A film is applied to the glass that has been cleaned and generously moistened with soapy water. They carefully level it from top to bottom and, using a spatula, begin to expel air bubbles (from the center to the edges). In problem areas, to ensure a good fit of the material, heat it with a hairdryer. The film becomes more pliable and takes on the desired shape.
If three strips are glued (usually overlapping), then there is no need for heating. To make the joint less noticeable, it is advisable to combine it with glass heating lines, which cannot be used for two days after completion of the work.
The side windows of the VAZ 2106 are tinted in a similar way. Before starting work, it is advisable to remove the seals. Then a pre-cut piece of film is glued onto the glass moistened with a soapy solution and air bubbles begin to be expelled. Excessive efforts can damage the material, so you should act carefully.
When the material is glued to the glass (whether back or side) the excess is cut off. Then you can dry the surface with a hairdryer, which is especially important in the cold season. You can use the window lifters after the film has completely dried, that is, after 2-3 days.
Preparing for work
First, you need to check the integrity of the glass, because the film will adhere well and will only look good on undamaged windows. Secondly, it’s worth deciding on the color of the tint film; it’s best to take a shade that matches the color of the car - then you definitely won’t go wrong.
Next, you need to select the light transmittance of the tint. It is important to take a film with a color transmission rate of no higher than 70 percent in order to take into account the requirements of existing legislation. The main thing is not to save money, because cheap film will stick much worse
. move to the corners, and will last significantly less than its more expensive counterparts. A good example of high-quality film are American samples; for example, for VAZ cars, a 20 percent film would be very convenient.
In the end, it is important to remember that, as with any car, tuning a VAZ 2109 car is quite a feasible job.
Salon
The interior of the car is fully consistent with its style, general idea and exterior. The dashboard is equipped not only with a speedometer, but also a tachometer, as well as other important sensors: how many liters are in the tank, whether the dimensions are turned on, and more. And the biggest innovation was the antifreeze temperature readings.
In the middle of the car is the center console, where the most important functions are located. In its lower part there is a manual gearbox and buttons for turning on the heating of the car. It also has a clock and a radio, which is quite unique for cars of this class.
The steering wheel of the black VAZ-2107 was three-spoke, the rim was quite average in size, and the diameter of the entire steering wheel was about 520 millimeters. In the middle of it, as expected, there is a large button-panel, when pressed it will produce a sound signal.
Types of tints
In addition to classic do-it-yourself tinting, there are other types. However, they all require special knowledge and equipment, so it’s unlikely that you can do it on your own. We suggest you familiarize yourself with these tints:
Removable toning
Do-it-yourself removable tinting at home is possible, but only if you already have experience in such work and also have the necessary tools and materials.
A film for static tinting is applied to a special plastic substrate. This removable backing is very easy to remove if necessary, for example, if you are stopped by a traffic police officer, and then just as easily put back in its original place. However, not all drivers find removable tint convenient.
Electrical toning
Doing electronic tinting yourself at home is quite difficult, since it involves installing a special three-layer glass. The main feature of such auto glass is that it changes color depending on the desire of the driver. Using the remote control, you can set any dimming level.
Spraying on glass
This type of tinting can only be performed in a factory setting, since it is carried out using a special technology that is unlikely to be reproduced on your own.
A very thin layer of metal is sprayed onto the glass under vacuum conditions, thus darkening the surface by an average of 25%.<.p>
Automatic tinting (double glass)
In this case, two glasses are installed - regular and tinted. You also need to install additional window lifters so that, if necessary, you can lower the tinted glass and leave the usual transparent one. So, double glass will always save you from a fine if traffic police officers suddenly decide to check the percentage of tinting.
In principle, you can handle the installation of double glass yourself. However, to do it yourself requires a lot of practice.
Sequence of work
How to tint a car window so that the work goes smoothly and the result pleases you? Proceed according to the following instructions.
- Remove the rear window, this will provide you with convenience and quality work.
- Clean the work surface from dust and dirt by washing it with a special solution and wiping it dry with a lint-free cloth.
- Make sure that there is not a single speck of dust left on the surface of the glass.
- Cut the tint film according to your pre-measurements.
- Separate the layers of film using two pieces of tape glued at different levels.
- Apply the film to the canvas and adjust its position. To achieve ideal placement of the film sheet, you can use a soap solution.
- Now it's the turn of the rubber spatula. Tinting the rear window of a VAZ 2107 on your own will work perfectly if you move the spatula in one direction. Use a spatula until all air bubbles are out of the contact area between the glass and the film.
- Use a hair dryer to shape the film at the curves.
Percentage of light passing through film
Remember: the film is glued from top to bottom. It dries in about three days. During this entire time, the material must not be touched with hands, so place the car where no one can touch the glass, even by accident.
Tinting the rear window of a VAZ 2107 with your own hands will be much easier if you use a removable film instead of a regular film. This film adheres to the glass using static energy, does not impede the movement of the side windows, and can be removed and reapplied if necessary. It has significant advantages, because condensation does not accumulate under it. Removable tinting is also performed in conditions of perfect cleanliness.
Tinting the rear window of a VAZ 2107 on your own is not an easy procedure, but not extremely difficult either. With a minimum amount of knowledge and skills, and a good amount of patience, every car enthusiast can perform tinting without problems. Skillful hands, a bright mind and a good mood are the main components of high-quality work with any car!
–> –> –> –> –> Content
:
Read customer reviews
Vitaly.
Toyota Verso II Tosno I always wanted to do everything in one place. I brought it and got everything I wanted. The guys were great, they figured it out quickly, even though they didn’t have an electrician. They invited a specialist to install an alarm and parking sensors for me. This is not the first time I have tinted with you, I always recommend it to my friends.
Alexander. Honda CR-V Rostov-on-Don
Everything was done well, the only thing was that I had to wait 30 minutes for me to arrive. For some reason, but I'm not mad, thanks for the discount and free car wash.
Anna. Chery Amulet Youth
Very grateful for the good work. Fast, high quality and the price is reasonable, not that many services suck. I recommend you to everyone I know, expect Anna to say something soon)
View more
What you should not do if you are subject to an administrative fine for tinting
- After the inspector stops you, the film will be peeled off, and also after a fine is imposed. Not only does it look servile and the action itself is funny and will amuse traffic police officers, like a case of severe clinical clowning, it is also ineffective, since your driving of an inappropriate vehicle occurred before the stop. In addition, if you rented rooms before, now you will only pay 500 rubles.
Note. If a person is wealthy, he can give 500 - 1000 rubles every day. But the insidious authorities came up with a new move: in addition to the fine, they are given an order obliging them to eliminate the cause of the offense within 10 days.
Vinyl wrapping (Car Wramping) VAZ 2107
We will wrap (Car Wramping) a VAZ 2107 with vinyl film. In general, the process is similar to applying a tint film to glass. Before you start working, you need to stock up on the following tools: clean, dry rags, a sharp knife, a hair dryer or a hair dryer, a scraper with a rubber or felt plate, a sprayer with water and detergent. If the sticker is small in size and applied to a flat surface of the body, then in this case a hairdryer is not necessary.
It will not be superfluous if another person helps you, this is if the sticker is more than half a meter in length. The vinyl sticker itself consists of the very bottom, where there is a siliconized paper backing, the sticker itself and the mounting film for transferring the image to the body of the VAZ 2107. Before you start work, you need to thoroughly rinse the car body and clean it of chemical contaminants, after which wait a while until the surface is completely dry. We pre-treat the sticker area with a solvent. The air temperature during work should be at least 5 degrees Celsius, however, small stickers that are glued to a flat surface can be glued at lower temperatures. We determine exactly where the vinyl film will be glued; mark in advance where the upper corners of the sticker will be located. Before removing the backing, apply the sticker to the surface of the car and see how it lays down and fits the body. It’s better to check everything in advance so you don’t have to worry about aligning the pattern later. Next, we separate the protective layer, treat it with water from a sprayer, and also spray the treated surface of the VAZ 2107 body with a sprayer. This is done so that in case of inaccuracy, the situation can be easily corrected by moving the film, plus this way you can easily remove air bubbles from under the film.
Do not soak the paper backing, otherwise problems may arise when separating the sticker from the backing. We apply the sticker to the car, roll it with a rubber spatula from the middle to the edges, then dry the surface with a hairdryer. Be careful not to allow wrinkles and folds to form. If a section of the body is not level, you do not need to roll the entire sticker on at once. First, roll its central part, which runs on a flat place, and leave the edges untouched. Gradually go from the middle to the edges, stretch and heat the sticker, preventing bubbles from forming. When a wrinkle forms, you need to carefully tear off the glued part and roll it again, while heating it generously with a hairdryer, but it is important not to overdo it and not melt the film. After drying, let the film stand for 15 minutes. Next, pull the edge of the mounting film and separate it from the application. Take a rubber spatula and remove any remaining air and water bubbles. If too large bubbles form, heat this area with a hairdryer and pierce it with a needle, pressing this area to the body.
Rate this article: Share with friends!
tuningtaza.ru
Procedure for tinting glass and headlights with film
Ideally, work begins with dismantling the glass or headlights of the VAZ 2107, but this does not need to be done. Before this, or better yet after, the surface should be thoroughly washed, paying special attention to the corners. A special solution is used for washing. Then the glass or headlights are thoroughly wiped with a lint-free cloth.
The next step is measurements, according to which the film is cut, leaving allowances along the edges (approximately 5 cm on each side), and it is advisable to separate the layers with an assistant. The cloth that is applied to the glass is moistened with a soap solution. The diluted shampoo is applied from a spray bottle to the surface to be pasted, after which the film is applied with an adhesive layer to the glass or headlight. Don't forget that you work with the material from top to bottom. Having leveled the film with your hands, begin to carefully smooth it with a rubber spatula.
To avoid scratching the surface, use a transparent layer, which is applied to the dark one and air is expelled through it.
Excess film can be trimmed a few hours after finishing work. The knife should be held at an angle of 30 degrees to the surface. After cutting, the glass is dried, for which a hairdryer is also used. Installation into place is carried out after 48 hours. It is during this period that the film will finally dry and adhere securely to the surface.
What to consider?
The film must be attached directly to the inside, because this way you can ensure its maximum protection from various damages.
If you need to tint the rear window of a car with your own hands, or you even want to tint all permissible windows, then you should first understand where this film can be installed and where it cannot. In Russia, in accordance with current legislation, tinting of front car windows can be carried out exclusively using a film in which the light transmittance is at least 75%.
Classic rear window tinting
Before tinting begins, the tinting film is formed. The film is cut to the desired size and molding begins. This procedure will allow you to tint the rear window perfectly. In addition to a sharp knife, a hair dryer and a rubber squeegee, you will need powder. Molding is done from the outside of the glass. The process steps are:
1. Wash thoroughly and evenly sprinkle the glass with powder on the outside and rub it over the entire area, “powdering”.
2. Place the film pattern with the adhesive side up, then with a hairdryer and a soft cloth we begin to shape it. Avoid scratching the film.
3. Place the molded film on the washed and dried inside of the rear window.
4. Having previously peeled off the protective film, spray the adhesive part with a solution from the shampoo using a spray bottle. The excess solution must be allowed to drain. We also spray a soap solution on the inside of the rear window.
5. Place the film on the glass, aligning the edges and begin to smooth it with a spatula from the central part to the edges, expelling water and air.
The glass is tinted
If you decide to reduce the visibility of the car interior by tinting, you should be very careful when choosing the method of completing the work. When you need to tint the rear window of a VAZ 2107 yourself, you need to strictly follow the instructions, performing all operations step by step. If you don’t want to bother with film, spatulas and a hairdryer, visit a service station, where the craftsmen will tint the windows, taking into account your wishes and requirements. True, for such work you will have to pay a certain amount, which you can save by performing all the operations yourself.
Return to contents
Tools
Not everyone understands that tinting is not such a simple procedure, and it is not enough to just take and stick a film.
You definitely need a certain number of tools in order to properly tint your car windows yourself. VAZ 2107, 2106 - these and other domestic cars are no exception, and you should not think that it is easier to apply film to our cars than to others. In this regard, you will need the following tools:
- Film. In the vast majority of cases, a single roll of standard sized tint film is sufficient to cover all the side windows.
- Rubber spatula. Often, when you buy tint film, you will be given a specialized plastic scraper as a bonus. Of course, you can also use it when you do your own car window tinting. This tool is quite effective and convenient, but there is a risk that micro-scratches will remain on the glass.
- Stationery knife. A knife is also supplied with the film, but in fact it often becomes dull quite quickly, as a result of which the film begins to literally tear. That's why it's always better to have an extra utility knife on hand.
- Glass cleaner and warm, clean tap water.
- Completely dry cloth. It is worth noting the fact that the rag must be free of lint. This is the only way you can be absolutely sure that during the tinting process you will not cause any micro-scratches on the glass.
- Spray.
How to choose a tint film
Speaking about tinting a VAZ 2107, one cannot help but touch on the most important question: how to choose a tinting film? The main rule when choosing film is this: savings are unacceptable here.
Yes, there is a great temptation to buy cheap Chinese film. But the throughput of such film leaves much to be desired. When driving at dusk, the driver may no longer be able to distinguish obstacles located only fifteen meters from the car. And the service life of Chinese film is very short: a car owner will be very lucky if it lasts at least a couple of years. And when the driver finally decides to get rid of the cheap film, another unpleasant surprise awaits him: a dark layer of paint remaining on the glass. The fact is that on cheap tinting, the paint layer is usually mixed with the adhesive layer (it is precisely because of this feature that visibility deteriorates at dusk). After removing the film, the sticky paint simply remains on the glass and is not so easy to remove.
Expensive and high-quality tinting does not have this drawback, which is why it is worth paying attention to the products of the companies listed below.
How to tint a VAZ 2107 car using film yourself
When tinting a VAZ 2107, no special problems usually arise, but there are several nuances that we will talk about.
If we take into account the fact that 20% of the Russian population are owners of domestic VAZ cars and modernize them with their own hands, then a short description of the work on tuning these cars would be appropriate. One of the simplest and most common types of tuning is window tinting. This time a VAZ 2107 was chosen to describe the tinting process.
The VAZ “Seven” is a car that is simply impossible to imagine without tinting. The first thing the new owners of this model did was to cover all the windows except the front (and sometimes even that) with a dark film. Some even put a strip of tint on top of the windshield to feel like they were in a tank.
Thus, the “Seven” without tinting could only be seen in the factory workshop or in a car showroom. I wanted to tint her right away: it seemed that she was missing the most delicate detail of her clothing. In such a tinted form, the seventh model was remembered and loved by many.
But the “happiness” did not last long. Legislation has become stricter regarding tinting. Many had to remove the resin film and stick on an approved one, which already made it possible to view the interior against the light. However, the translucent permitted tinting practically did not spoil the image of the VAZ 2107 that had developed over the years.
What has changed in the system of penalties for tinting?
- The best part is that the penalty in the form of license plate removal, which was imposed on July 1, 2012, has been abolished since November 2014. For this we can say thank you to Federal Law No. 307 (On Amendments to the Administrative Code) And now all that remains is a fine of 500 rubles, part 3(1) of Art. 12.5 of the Code of Administrative Offenses of the Russian Federation. The fine is imposed at a time, regardless of the number of glasses and light transmittance.
That is, no matter how tinted the windows are, you will not lose more than 500 rubles (in this place).
Contacts
| Flotskaya street, 54 A | +7(495)199-46-34 from 09.00 – 21.00 |
| Tyumensky proezd house 5, building 2 | +7(495)199-46-34 from 09.00 – 21.00 |
| Krasnobogatyrsky 13 building 1 | +7(495)199-46-34 from 09.00 – 21.00 |
| Ozernaya 46 building 2, building 2 | +7(495)199-46-34 from 09.00 – 21.00 |
| Second silicate passage 34 building 1 | +7(495)199-46-34 from 09.00 – 21.00 |
| Lyubertsy, Projected pr-d 4037 | +7(495)199-46-34 from 09.00 – 21.00 |
| General Beloborodov Street 38 | +7(495)199-46-34 from 09.00 – 21.00 |
| Railway factory 3 | +7(495)199-46-34 from 09.00 – 21.00 |
| Stakhanovskaya street 18, building 2 | +7(495)199-46-34 from 09.00 – 21.00 |
| Admiral Rudnev street, 20 | +7(495)199-46-34 from 09.00 – 21.00 |
| Voronezhskaya street, 13k2 | +7(495)199-46-34 from 09.00 – 21.00 |
| Warsaw highway, 133A | +7(495)199-46-34 from 09.00 – 21.00 |
| Lyublinskaya street, 68 | +7(495)199-46-34 from 09.00 – 21.00 |
| Nagatinsky proezd, 15, bldg. | +7(495)199-46-34 from 09.00 – 21.00 |
| Dmitrovskoe highway 163 building 21 | +7(495)199-46-34 from 09.00 – 21.00 |
| Yaroslavskoe highway, 124 | +7(495)199-46-34 from 09.00 – 21.00 |
| Mytishchi, Academician Kargin Street, 31A | +7(495)199-46-34 from 09.00 – 21.00 |
| Birch Alley, 12A | +7(495)199-46-34 from 09.00 – 21.00 |
| Odintsovo, Novosportivnaya street, 10 | +7(495)199-46-34 from 09.00 – 21.00 |
| Vasily Petushkova Street, 3k3 | +7(495)199-46-34 from 09.00 – 21.00 |
| Autumn street, 23 | +7(495)199-46-34 from 09.00 – 21.00 |
| Kakhovka street, 28 | +7(495)199-46-34 from 09.00 – 21.00 |
| Avtozavodskaya street, 24 | +7(495)199-46-34 from 09.00 – 21.00 |
| Pervomaiskaya street, 12 | +7(495)199-46-34 from 09.00 – 21.00 |
| Zelenograd | +7(495)199-46-34 from 09.00 – 21.00 |
| Suzdalskaya 16, b | +7(495)199-46-34 from 09.00 – 21.00 |
| Zavoda Serp i Molot proezd, 1, bldg. | +7(495)199-46-34 from 09.00 – 21.00 |
| Dmitrovskoe highway 56 | +7(495)199-46-34 from 09.00 – 21.00 |
| Sailor's silence 1 | +7(495)199-46-34 from 09.00 – 21.00 |
All rights reserved. © 2005 – 2022 Glass tinting in Moscow|
Site Map
Dimming process
In order to tint the windows, you need to remove them, excluding the rear ones. The latter is fixed in the factory using special technology, so it will be quite easy to pull it out, and there is no need to do so. This glass is convex, which is why the film must be given a certain shape before gluing begins. The surface of the glass must be washed, that is, degreased by applying a soap solution to it. The film is applied to the glass from the outside, but the protective base should not be removed. The technician should intensively smooth the film by applying a construction or regular hairdryer to it. Your task is to completely displace all the air from under the film.
Add a comment Cancel reply
- Here you will find information on the repair, maintenance and operation of VAZ cars. Use the convenient search on the site!
- Categories Auto news
