Alarms StarLine (StarLine) operating instructions and installation

Car alarm Starline with autostart provides machine protection from penetration by unauthorized persons and supports starting and stopping the engine without human intervention. The equipment is capable of working with standard security systems and can be supplemented with modules for tracking movements using GPS signals. Compatibility with digital CAN and LIN buses improves interaction with automotive systems.

Starline occupies a leading position in the security equipment market.

Starline alarm models

As of mid-2022 (owner of the Starline trademark) offers the following types of alarms with support for programmable start of the power unit:

• B96 and S96 will win ;
• B96 and D96 with support for CAN and LIN buses and cellular and satellite communication units;
• A96 with the ability to work via CAN and LIN buses;
• E96 (standard and advanced Pro and Lux ​​versions);
• A93 (several models differing in the composition of the kit);
• T94 , designed for freight transport.

How to register the Starline A9 key fob

From the very beginning, the remote control must be linked to the car alarm. Up to 4 key fobs can be connected to one microprocessor module. To do this you need:

1. With the ignition on, hold down the Valet service button until 4 short beeps sound. The Valet button is a small device with an electrical wire that connects it to the main unit of the security complex. It may be located under the dashboard, steering wheel, in the glove compartment or fuse hatch, near the gearshift lever or mounting block.
2. Immediately after this, simultaneously press: 1 and 2 buttons of the main remote control, 3 and 4 buttons of the additional key fob (without display). If the connection is correct, a beep will sound.
3. To link the following key fobs, you must also press buttons 1 and 2 on them, keeping the interval between them no more than 5 seconds.
4. After binding, you can turn off the ignition and begin programming the key fob: setting up key assignments and starting modes.

This is what the service button looks like, aka Valet
Important! When linking new key fobs, you must overwrite the old ones, otherwise they will be deleted from the system.

Signaling capabilities

Main features of Starline systems:

• motor protection using blocking relays or digital or code relays;
• silent activation or disabling of the security mode;
• protection of a car with a running engine;
• activation and deactivation of protection without using a key fob;
• automatic return to the protection state if the button on the key fob is accidentally pressed;
• programmable code for emergency shutdown;
• automatic disarming ;
• adjusting the sensitivity of shock or tilt sensors;
• control of central door locking.

Starline protects a car with a running engine.

Principle of operation

system includes a block with a head microprocessor , which receives information from sensors and limit switches. After arming, the controller opens the circuits of the engine control unit and the ignition switch, preventing the power unit from starting even with a standard key.

When an attempt is made to enter warning signals by a siren, and the owner receives a notification on a cell phone or key fob.

Installation instructions

If the Starline A9 system is installed incorrectly, the anti-theft alarm may not work correctly. To prevent this, you should contact a service center or carry out installation yourself according to the instructions. Manufacturers recommend following several rules.

• The system should be installed on vehicles with an electrical voltage of 12 V. The negative poles are connected to the body panel.
• Installation should only begin after disconnecting the battery terminals.
• It is important to familiarize yourself with the recommendations on the operation of the standard radio and airbags. This is explained by the possibility of encoding the device.
• If it is necessary to increase the wiring, then the additional conductor must have the same cross-section and material as the main one.
• The wires must be connected using soldering. After this, this section of wire is wrapped with electrical tape or heat-shrinkable tubing is used.

What you will need

To carry out installation work according to the Twage A9 instructions, you must prepare the following tools and materials:

• instructions that come with the system;
• M6 bolts;
• several suitable sizes of ties or screws;
• plastic spatulas;
• a set of socket heads or wrenches;
• drill (for work you will need several metal drills);
• pulling (it is necessary for laying and connecting the cable in the cabin);
• pliers (they are used to remove insulation when extending cables);
• materials for cable insulation.

Connection diagrams

If it is necessary to connect the 6-pin central locking connector, the following connection diagram is used.

• Red wire for plus 12 V (connects to the battery terminal “+”).
• The cable with the yellow winding is the IGN1 output, it is needed to maintain the ignition.
• When pinned out, the blue cable is attached to the ACC ignition switch.
• The green wire remains free.
• A yellow-black cable with a larger cross-section must be connected to the starter.
• Black and white. Required if the starter is blocked.

Security system operating modes

The equipment is capable of operating in several modes:

• security with informing the owner with a siren and notifications received on the phone or control panel;
• automatic activation of protection (after disarming and absence of signals for unlocking doors or trunk lid);
• silent security (when an alarm is triggered, the parking lights or hazard warning lamps flash, information is displayed on the screen of a key fob or smartphone);
• anti-robbery (with engine blocking and alarm activation when an attempt is made to steal a car with the key in the ignition);
• panic (with sound and light pulses);
• searching for a car in the parking lot.

Alarm programming

To program the central unit, use a key fob and a service button located inside the car. Information about setting depends on the equipment model; tables are given in the operating instructions (supplied in a set; in case of loss, the document can be downloaded from the manufacturer’s official website). When programming, combinations of buttons on the remote control are used; to activate or disable functions, you will need to briefly or long press the keys and move between menu sections.

To program the alarm, use a key fob.

Pairing the alarm with the key fob

To transmit commands, a feedback key fob with a transceiver operating at a frequency of 433.34 MHz . The included remote controls (standard delivery includes a key fob communicator with a display and a backup remote control without a screen with a reduced range) are linked to the controller at the factory.

The owner of the machine can purchase additional compatible products (depending on the model, the equipment supports from 2 to 4 key fobs), which must be programmed in accordance with the instruction manual .

How to disable the turbo timer?

Disabling this function, regardless of engine type and installation features of anti-theft systems, is done through the setup menu.

Starline A9, A61

You can remove the turbo timer on the A9 and A61 like this:

1. The car engine starts.
2. The emergency operation button for the anti-theft system is pressed six times.
3. The motor is turned off. The anti-theft siren should emit six short beeps.
4. The emergency mode entry button is pressed 16 times.
5. The first key on the remote control “clicks” briefly. The turbo timer function will be disabled.
6. The ignition in the car turns off.

Starline B9, A91

You can remove the turbo timer on alarms B9 and A91 as follows:

1. Button 3 on the remote control is pressed and held until the communicator beeps twice.
2. The indicators on the key fob display in the bottom row will start blinking. Using the third button, the “Extra Run” function is selected.
3. The first key is briefly pressed. The external lighting devices of the car will give one signal, the communicator will give a triple pulse. The “Extra Run” text should disappear from the key fob display.

Starline A92

Disabling the option is done like this:

1. The ignition is turned on and the engine starts.
2. The emergency service button is pressed six times.
3. The power unit of the car stops, the siren will sound six beeps.
4. The emergency service key is pressed once.
5. The first button of the key fob “clicks”.
6. The ignition in the car turns off.

Starline A94, E91

Disabling Guide:

1. The ignition in the car is turned off, the engine is turned off.
2. The emergency service button is pressed five times.
3. The engine is started. The communicator should sound a short beep.
4. Using the communicator controls, you need to select the “SF” indicator.
5. Key 3 on the communicator is pressed and held until the device beeps, after which it is pressed once briefly. The key fob screen should display the number of the option being configured.
6. Using the second and third buttons, function number 17-1 is selected.
7. The first key is briefly pressed.
8. The car engine stops.

Video: disabling the turbo timer option

The AutoAudioCenter channel made a video that describes in detail the functions of the Starline A93 anti-theft system, as well as recommendations for managing options.

The meaning of the key fob buttons

The main purpose of the buttons on the control panels is shown in the table (using the example of the Starline A93 ).

Key number	Main keychain	Auxiliary remote control
1	Turning on security with sound, interrupting the alarm, extending the operation of the power unit when warming up
2	Disabling security with siren signals
3	Control of devices connected via an additional channel (for example, a trunk lid lock drive)
4	Managing devices connected via an additional channel	Key is missing

Please note that to activate a number of functions, a long press on the buttons ( more than 2 seconds) or a combined action on the keys is required. For example, to start the security mode without sound, you need to successively press the “1” the main remote control or double-click the “1” on the auxiliary key fob. Extended information about the purpose of the buttons is provided in the instructions .

What can StarLine A91 do in terms of autostart?

• Random autostart: can be performed at any time when the car is in the area of ​​reliable radio reception or an external GSM module is connected to the alarm system;
• Auto start on alarm clock: the car will start once at the time specified in the alarm clock settings;
• Autostart "Starline A91" using a timer allows the car to independently warm up the engine at intervals of 2,3,4 or 24 hours from the moment the mode is activated;
• You can set the “Starline A91” temperature so that engine warming begins when the engine temperature drops below a specified threshold, but no more than once per hour.

Meaning of the icon on the screen

The display located on the main key fob simplifies the procedure for using the alarm and displays:

• transceiver status;
• information about the current time;
• operating mode ;
• status of the cellular or satellite communication module;
• information about the selected operating mode (with or without sound);
• information about the selected method of automatic engine start;
• information about the battery charge level in the communicator;
• data on the state of security zones;
• information about activating additional functions.

The display shows the status of the transceiver and information about the selected operating mode.

When an alarm is triggered , the screen displays the zone that triggered the siren (for example, a shock or tilt sensor, a door or hood limit switch).

At the same time, a buzzer (various melodies are provided depending on the type of event).

Equipment

The Starline A39 alarm kit includes all the products necessary for installation and operation of the system:

• head unit with control processor;
• main communicator with feedback capability and LCD display;
• batteries for the key fob (AAA batteries);
• additional pager that does not have a display;
• power module;
• auxiliary relay with socket;
• transceiver with built-in antenna;
• engine blocker bypass;
• siren;
• installation set of cables for connecting the security system to the power source;
• wires for connecting additional modules and sensors;
• antenna cable;
• GSM transceiver;
• led indicator;
• cables for connecting limit switches;
• engine temperature sensor;
• emergency mode button;
• limit switch with fasteners;
• terminal for connecting to a power source;
• Supporting documentation.

The antenna unit contains shock and vehicle position sensors, which looks like a three-axis accelerometer. This simplifies installation and makes the system more susceptible to theft attempts.

Setting up the Starline security system key fob

Starline security system communicator supports the following settings:

• method of automatic engine start (for example, by ambient temperature or by timer);
• current time (necessary for the autostart system to work);
• siren volume;
• remote adjustment of accelerometer sensitivity.

Auto start alarm

To activate automatic start, you need to turn on the alarm clock or program repeated engine starts. When using a temperature sensor, the threshold value and operating time must be specified.

All manipulations are performed using a key fob ; the operating time is indicated when programming the processor unit.

Time

To set the clock you need:

1. Enter programming mode by long pressing the communicator settings button.
2. Select the number of hours and then set the number of minutes.
3. Confirm the changes and exit the setup mode or proceed to programming the alarm or timer.
4. Check the correctness of the indication on the display.

Alarm volume

To adjust the siren volume, use the Sound menu section . The user sets the required value using the buttons in the range from 1 to 9 . When shipped from the factory, stage 2 is programmed (regardless of model).

Shock sensor sensitivity

To adjust the sensitivity of the tilt or shock sensor in steps, use the setup menu . The machine owner can disable the sensors to reduce the risk of accidental activation. When the setting is activated, a signal is given by the car's siren and lighting equipment, and the current sensitivity value is displayed on the key fob screen. Different types of alarms are equipped with sensors that have their own setting range (for example, in A93 the range is set from 0 to 14 ).

Additional functions

The key fob setup menu allows you to set the following parameters:

• turbo timer;
• duration of lock control pulses;
• automatic blocking control;
• a number of other functions, the list depends on the equipment model.

Advantages and advantages of the model

Every new alarm model that appears on the market must surprise buyers and have new functions, otherwise there will be no interest in buying it. Thus, the StarLine A9 alarm system has the main advantage - intelligent automatic engine start. And also, some of the important advantages of this model include the following advantages:

• many sensors (doors, hood, impact and other elements);
• communication with the vehicle within a radius of up to 600 meters due to 128 radio channels;
• the ability to start the engine from a mobile phone (with appropriate settings from specialists).

The StarLine A9 car alarm requires an AAA battery. The validity period directly depends on the frequency of use and many other factors, but on average it is from 3 to 6 months. The equipment has a dynamic control code, that is, protection against selection and interception. Thanks to these parameters, vehicle safety reaches a whole new level.

Starline A9 Twage is a security alarm for a car, which is equipped with auto start and feedback. The manufacturer has not produced this model of device for several years, but car owners continue to actively buy such security systems. The increased demand is due to simplicity, reliability, low price and proper operation in difficult climatic conditions.

Reset key fob settings

It is impossible to reset the key fob settings , since the product does not have a memory and is used for adjustment. There is a function to return the alarm parameters to factory values.

To perform the procedure, you must turn on the ignition , enter the reset mode using the service button and confirm the action (for further use, must be reprogrammed).

Possible faults

Malfunctions that a car owner may encounter:

1. Batteries in the remote control. If the alarm begins to work incorrectly, you must first check the functionality of the battery. The batteries in Starline remote controls do not have a long service life, so at the first symptoms of discharge they must be replaced. A decrease in charge is characterized by dimming of the diode and screen.
2. If you have problems with power supply, this may be due to a dead car battery. The reason must be sought in malfunctions of the safety unit or the power circuit of the anti-theft system.
3. Malfunctions in the operation of the central processor. Its breakdown will lead to the need for expensive repairs, because along with the control module, it is necessary to change the remote control, as well as other components of the anti-theft installation. It is not recommended to repair the central unit yourself.
4. Failure of controllers. These components can be replaced with new ones if the alarm model is not too old.

In practice, all failed elements, except the central processor, can be replaced with new ones without any problems.

Vladimir Korovin made a video in which he spoke in detail about the repair of the Starline central alarm unit.

If the key fob does not respond

The remote control may not work due to a dead battery.

If the battery is intact and replacing it does not produce results, the causes of the problem may be the following:

• there are high-voltage lines or a radio station near the car, this leads to signal disruption that cannot reach the central processor;
• the car battery is dead;
• The remote control is out of range of the alarm antenna.

If the problem lies in one of the listed reasons, then the car must be driven to another place and the remote control is checked for functionality.

Device repair is performed as follows:

1. Disassemble the remote control housing using a small screwdriver. Make sure there are no cracks or other damage to the internal circuitry. There should be no signs of poor soldering.
2. Using a regular construction brush, clean the internal components. Remove all dust from the case; it is not recommended to use cleaning liquids, as this may harm the board.
3. If, during the diagnostics, detached elements are found on the circuit, they must be carefully soldered into place.
4. The electrical circuits inside the key fob must be checked with a tester.

If the diagnostics did not allow the breakdown to be determined, then the cause must be sought in the capacitor element. In programming mode, hold down the key and rotate it 10 degrees. The process continues until the remote control and key fob are synchronized.

You can learn more about the step-by-step repair of the alarm key fob from the video filmed by the AlanMorfreeman channel.

Starline alarm repair

Repairing an anti-theft device involves replacing failed components with new ones. Faults related to the sensor or damaged wiring can be resolved independently. Failed controllers are replaced by dismantling and replacing with new ones. As for electrical circuits, if the damage is minor, the wire can be additionally insulated, and if the defect is serious, it must be replaced. Repair of problems related to the control unit should be entrusted to specialists.

Location of Starline security system components: connection diagrams and installation maps

The Starline brand alarm set includes installation instructions, which recommend installing the blocks as follows:

1. central module - in the car interior (in the dashboard);
2. transceiver - on the top of the windshield;
3. siren - under the hood on the engine panel;
4. impact sensor - hard on the body;
5. temperature sensor - on the engine cylinder block;
6. control diode - on the rack facing;
7. service button - in a hidden place with quick access;
8. limit switches are located under the opening body panels.

Table: price range and characteristics

How much a starline car alarm with auto start will cost depends on the chosen model and its inherent characteristics. To make the choice easier for a potential buyer, we have compiled a comparative table of characteristics of the company’s models that you are already familiar with.

Please note: the price with installation is very different from the price without it!

Feature/Model	StarLine A91	StarLine A93	StarLine A63
Radio interference protection	128 channels	128 channels	128 channels
Remote engine start	There is	There is	optional
LCD key fob	Yes	Yes	Yes
Siren	No	There is	No
Engine lock relay	No	There is	There is
Turbo timer	No	There is	There is
Trunk control	No	Yes	Yes
Working temperature	from -40 C to +85 C	from -50 C to +85 C	from -50 C to +85 C
Tilt sensor	No	There is	There is
Shock sensors	There is	There is	There is
Range, m	2 000	2 000	2 000
Key fob vibration mode	No	There is	There is
Indication of temperature in the car interior on the key fob	No	There is	There is
Price	from 4,950 rubles	from 7,450 rubles	from 5,600 rubles
Price with installation	from 10,800 rubles	from 14,100 rubles	from 9,800 rubles

How to use automatic start

To use automatic start, it is necessary to program the type of transmission at the installation stage (a jumper is provided in the main connector for automatic transmission; for manual transmission, the loop is removed). You should set the starter operating time and the type of ignition switch (with cylinder or push-button).

To activate the procedure, you must select the required algorithm, set additional parameters (for example, temperature threshold) and confirm the changes.

Restrictions

Remote starting is not possible when the limit switches are open or the ignition is on, when the parking brake lever is lowered and when the program neutral setting procedure has been incorrectly performed (applies to vehicles with manual transmission). The equipment is designed for 4 consecutive attempts to start the motor ; if the unit does not work, the program is reset (to ensure that the battery charge is preserved).

Basic Rules

When using autorun you must:

1. Park the car on a level, ventilated area .
2. Before programming , apply the parking brake and set the automatic transmission selector to the parking position, and for vehicles with manual transmission, carry out the procedure for activating the program neutral.
3. Before programming, make sure that the battery is in good condition and that there is enough fuel, antifreeze and engine oil.
4. Turn on air recirculation , which allows you to quickly warm up or cool down the car interior.

Answers to frequently asked questions

Starline car alarms, like any equipment, can malfunction.

Why won't the car start?

1. Remote engine starting is not possible if the key is left in the lock, doors, trunk or hood are open. It is necessary to check whether these conditions are met.
2. In some cases, cleaning the circuits from dust and eliminating traces of moisture in the remote control helps. It is also possible that the wiring contacts may open. Damaged wires can be repaired by a service center.
3. If autorun is programmed according to a schedule, you need to check whether the time settings are lost.
4. The immobilizer bypass may also be installed incorrectly. Then you will have to install an additional immo bypass module.

The remote control doesn't open the car, what's the problem?

Most likely the key fob is faulty. If replacing the battery does not help, then the remote control is reconnected or replaced with a similar one.

Other reasons:

• improper installation of the alarm system;
• broken wires;
• problem with central locking.

How to turn off the Starline alarm?

The security system of this company is turned off by the Valet button. This is a separate device that is mounted in a secret place inside the car. You can find out the location of Valet from the instructions or from the former owner of the vehicle. Most often, the emergency shutdown button is located under the steering wheel, on the doors, in the glove compartment, next to the pedals. Press it three times within 20 seconds. with the ignition on.

Another way is to enter a secret code consisting of two numbers. The standard is 11, but the code may change. The code numbers are entered sequentially by pressing the Valet button and turning the ignition off and on after entering the first part of the code. The same 20 seconds are allotted for this.

How to find out the alarm model?

You can identify the version of the security system by its appearance and key fob display. For example, the A91 has a blue protective coating, the left icon shows the clock. Early releases can be easily recognized by the presence of an external antenna. You can find a model by keychain in the catalog on the Starline website or using an image search in search engines.

The serial number, which is located on the back cover of the key fob or on the central unit, as well as in the warranty card or on the box, will also help. Usually the model name comes before the letters S or W.

Starline car alarm review

The manufacturer offers alarm systems in several modifications, which differ in the level of equipment. The minimum set includes a processor unit, a control LED, a communicator, a temperature sensor, a siren and electrical wiring harnesses. To support engine operation without a key, a programmable immobilizer bypass is used in the ignition switch. The buyer can purchase additional modules (the list of options depends on the model of the Starline security complex).

A91

An outdated model that has been discontinued, but is occasionally found on sale. The equipment is equipped with a remote control designed for use in urban environments; the increased power of the transceiver made it possible to increase the warning range to 2 km (in open space). The automatic start module allows you to start the engine based on signals from a temperature sensor, by a timer, or periodically at specified intervals.

A91 is a discontinued model.

A93

The alarm system supports automatic start and can be equipped with units for switching with CAN or LIN buses and a satellite tracking module. Support for authorization by PIN code is provided (in case of loss of the key fob, the owner presses the programmed key combination on the instrument panel).

The price of equipment ranges from 8.3 to 14 thousand rubles. (depending on the composition of the set).

A63

A complex with the ability to connect to digital buses and install a GPS-GLONASS unit to track vehicle movements. It is equipped with an integrated shock and tilt sensor, which warns the owner about an attempt to lift the car with jacks. Does not support the automatic start function of the power unit. The cost of the basic configuration is 7.4 thousand rubles.

A63 is a complex for tracking vehicle movements.

Advantages and disadvantages

Users note the natural pros and cons of the manufacturer’s alarms:

pros

• Reliability
• Large range of models
• High level of security
• Wide operating temperature range
• User-friendly interface
• Manufacturability
• Advantageous package

Minuses

• Periodic malfunctions due to low temperatures
• Complexity and multi-stage installation
• The need for an immobilizer unit

Kinds

The protective devices have various sensors and a control panel. These components are connected by a cable that must control communication between them. Some of the systems can be wirelessly connected to sensors and communicate. Common types:

1. Sound system (one-way, two-way). Devices that make loud sounds when interference occurs are the most popular gadget of their kind. The device is equipped with various sensors that are sensitive to movements and shock loads within a specified range. Sensor sensitivity levels can be increased to detect even the smallest movements. The sound produced not only alerts the owner, but also drives away burglars.
2. GPS device. This type does not produce an audible sound, but allows the owner and monitoring services to know that the car has been hacked. The GPS transmits signals to the computer whenever the vehicle is tampered with.
3. Immobilization of car alarms. An immobilizer provides security by immobilizing the vehicle. The security immobilization strategy is implemented using various methods (engine shutdown, automatic locking mechanisms and fuel functions). The innovative device must be used with a sound device.

Car security systems are also ideal for other types of transport, such as yachts, motor boats and small craft.