Operating instructions for the Starline A94 alarm system and its characteristics

The original Starline A94 2can key fob has an increased level of signal security thanks to the twage encryption system. It is worth noting that the level of cryptographic protection of the main control panel is the same as that of the additional one. The signal encryption method chosen by the manufacturer makes intelligent hacking by code grabbers unlikely. The A94 anti-theft system includes two key fobs. One of them serves as the main one, having a several times greater range and a liquid crystal display. The number of buttons on such a remote control is four. The second keychain plays the role of an additional one. Its range under ideal conditions is only 17 meters, there are three buttons, and no screen. But it is enough to activate and disable most security functions and some service ones.

The main key fob receives information about the alarm status if:

• an alarm occurs due to sensor activation;
• the system executes commands from any key fob;
• the functions or operating modes of the complex have undergone changes in some way.

Information about the current state of the anti-theft system is regularly displayed on the screen of the main control panel. In case of any changes, the backlight and sound signals are automatically activated. It is possible to turn on vibration mode. About the Starline A94 car alarm.

In addition to general information about the safety of the car, the display of the main key fob allows you to find out what the temperature of the interior and engine is, the current time, the voltage level in the network and whether the alarm clock is turned on to start the engine. All data is transferred to it using the built-in GSM module. It is the main control panel that allows you to use the system’s capabilities at the maximum level, including the Slave service mode.

As for the additional keychain, it is intended to play an auxiliary role in case the main one is somehow unable to perform its functions. Its functionality is reduced not only due to a smaller range, but also due to the lack of a screen, which does not allow informing the car owner about the current status of the alarm and the car. It is adapted only to carry out basic commands.

How to unlock a91?

To unlock

alarm key fob, you need to simultaneously press the second and third buttons. A double beep will sound and the remote control will execute commands again.

Interesting materials:

How to set a photo to a contact in a Samsung phone? How to set a profile photo on Facebook without cropping from your phone? How to install Geolocation on a child's phone? How to install GIF on your phone screen? How to install Google Calendar on your cell phone? How to install a GPS navigator on your phone? How to set up speakerphone on your phone? How to install Google on the desktop on your phone? How to install Hi Suite on your phone? How to install a shortcut on your phone?

Equipment

Two system control panels are included as standard with the Starline A94. Both have a body made of durable, high-quality plastic. The main difference is that the main one is equipped with a screen. In addition, the manufacturer placed it in a leather case. As for the spare key fob, it is distinguished by both the lack of a display and a smaller number of buttons.

Both remote controls are internally equipped with microprocessors of the same model, which make controlling a modern security system easier and more intelligent. At the same time, their capabilities are more fully revealed in the main keychain.

Starline A94 key fob diagram

The main key fob of the Starline A94 anti-theft system, as already noted, is equipped with four keys and an LCD screen. The latter is located on the front panel of the device, occupying it almost completely. Because of this, the buttons were placed on the side. The first is the main key, slightly highlighted because it is used most often.

Where is the service button on Starline A61

The display shows function icons in the form of icons and icons, as well as information about the current system status.

As for the additional remote control, it does not have a display, so all the buttons, of which there are three, are located in a circle on the main panel.

System Features

This system can support up to 4 key fobs maximum.

It is very important to pay attention to the model of both the key fob and the alarm; in some cases, car owners do not pay attention to the additional indices following the model name. It will not be possible to flash a key fob of the same model, but with a different index; you will need to replace the alarm key fob. You should replace the key fob with the exact same one you have, without any indexes.

The car owner should know that programming a Starline key fob into the alarm unit will not cost only the firmware of an additional key fob; you need to immediately write down the key fobs that you are going to use. Thus, having one working key fob and one unstitched one, when programming it is necessary to bind the key fob (old and new) at the same time.

This point is very important, because Many car owners are faced with a problem when the additional key fob works, but the main key fob does not work.

Installation instructions

Starline A94 is a universal security system that can be equally easily installed on a VW Polo, Hyundai Solaris or a classic Lada. Installation begins with the installation of the central control unit. It is placed in a place inaccessible to strangers next to the dashboard, most often behind the trim. It is important to monitor humidity.

At the second stage, a siren is installed. Usually it is located under the hood, but at a distance from the power unit itself. Otherwise, it will quickly break due to high temperatures. The horn should be on its side or up.

Next, tilt and shock sensors are installed. They are placed in the vehicle interior. As for the temperature sensor, its place is on the pipe of the engine cooling system.

At the fourth stage, they begin to install the ignition lock relay, and the hood and door limit switches. The antenna with the unit is placed on the windshield, but at a sufficient distance from metal parts. Also in the area of ​​the windshield, but in the cabin, LEDs are installed.

At the last stage, connect all the included wires. They must be laid under the casing.

Details can be found in the instructions in pdf format.

Functions

The Starline A94 GSM alarm system performs security and service functions, as well as self-diagnosis.

Main protective functions:

• Security mode. Light and sound alarms are given.
• Sending alert signals to a key fob with an LCD display.
• Silent activation/deactivation of security mode.
• Silent security mode.
• Security mode with engine running.
• Turning security on/off without using a key fob.
• Car alarm management and monitoring its status via GSM channel.
• Automatic return to security mode in case of accidental shutdown.
• Automatic activation of the security mode.
• Immobilizer, anti-robbery, panic modes.

• Bypasses the door area and delays the activation of sensors until the interior lights are turned off.
• Selecting the volume of signals.
• Remote control of sensors and central locking.
• 2-step unlocking and locking of doors.
• 6 channels for controlling additional equipment.
• You can separately see the temperature of the engine and the cabin.
• Comfort functions, calling from the car.
• Light alarm for open doors.
• Turbo timer mode.
• Remote programming of functions.
• Service mode
• Ability to work with external GSM modules. The 94A is controlled from the phone.

• indication of the faulty zone on the display;
• determining the cause of the alarm;
• indication of system status on the screen and LED;
• automatic monitoring of sensors with shutdown of faulty elements;
• LED indication of limit switch operation.

Advantages and disadvantages

Judging by user reviews, the A94 alarm system is superior to the good A93 in terms of protection and functionality. Its main advantages:

• The presence of a CAN bus allows you to create an individual digital code, which makes car theft almost impossible.
• Starline A94 2CAN has a Slave mode. The A94 Slave security system can be controlled from the vehicle's standard key fob.
• Electromagnetic interference has little effect on system operation.
• A small number of false positives.
• Clear instructions for installation and setup.

• Auto start and turbo timer may malfunction at sub-zero temperatures;
• deterioration in the quality of alarm operation over time.

Firmware methods depending on the alarm model

After the service button has been found, the process of recording key fobs into the alarm memory should begin. Depending on the models, one firmware method should be used.

Method 1

1. Disarm, turn the ignition switch to the (Lock) position.
2. Press the (VALET) button repeatedly (7 times), each time the button is pressed the LED should blink.
3. Turn on the ignition, the alarm will notify you of entering the service mode with 7 beeps.
4. As soon as you enter the service mode, press and hold buttons 1 and 2 on the key fob simultaneously (for B6D, B9D, B61, B91, A61, A91, buttons 2 and 3), the key will be registered in the alarm unit.
5. When the key fob is successfully recorded, 1 beep will sound. If you need to bind a new key fob, then immediately after programming the first one, take the second key fob and press buttons 1 and 2 again. As soon as the key fob is registered, the alarm will notify you with a sound signal. If it was not possible to reprogram the key fob, the alarm unit will exit and switch from the service mode to the standard mode (the turn signals flash 5 times).
6. When all the key fobs are stitched, you need to turn off the ignition, the alarm will exit the programming mode (the turn signals flash 5 times).

Method 2

1. Disarm, turn the ignition on, then press and hold the service button for 6 seconds, after which 4 beeps will sound (service mode is on).
2. Immediately after entering the service mode, press and hold buttons 1 and 2 on the key fob simultaneously, the key will begin to register in the alarm unit.
3. If the key fob is registered correctly, 1 beep will sound. If you need to record an additional key fob, then immediately after recording the first one, start recording the second key fob, to do this, press and hold buttons 3 and 4. After recording the next key fob, the alarm will notify you with a signal, the number of signals depends on the order of the key fob for recording.
4. If the key fob has not been recorded, the alarm will exit the service mode (the turn signals flash 5 times).
5. After recording the required number of key fobs, turn off the ignition, thereby disabling the alarm from the recording mode (the turn signals blink 5 times).

Method 3

1. Disarm, turn on the ignition, then turn off, do this 3 times. Then the signaling LED will light up for 3-4 seconds.
2. Immediately after this, you need to turn on the ignition, then turn it off, do this 5 times and leave the ignition switch in the on position. The alarm will emit 5 beeps and the service mode will be entered.
3. On the key fob, simultaneously press buttons 1 and 2 on the key fob, the recording process will begin.
4. If the key fob is registered correctly, 1 beep will sound. If you need to record another key fob, then immediately after recording the first one, take the second one and press buttons 1 and 2 again. After recording the next key fob, the alarm will notify you with a signal, the number of signals depends on the order of the key fob for recording.
5. Turn off the ignition, the alarm will exit the recording mode and notify (the turn signals flash 3 times).

Reviews

Vladimir, 33 years old:

I work as a taxi driver and my car is my bread. Therefore, the choice of signaling played a huge role. Since I set my sights on the A94, I have never regretted it. You won't find anything better for this price!

I have tried many alarms, because my driving experience is more than 20 years. But I want to say that it looks like I wouldn’t trade my A94 for anything. It has everything I need.

The Starline A94 car alarm with auto start is one of the new generation anti-theft security systems. It features a high level of burglary protection, a wide range of functions and good reliability. There is an instruction manual for installing and configuring Starline A94.

Description Starline A94

This model was released in 2013. The system is a reliable security complex, characterized by extensive functionality and the presence of an option for intelligent auto-start of the engine. The transmission of impulses between the control module and the key fob is carried out via an unscanned dialogue channel, which eliminates the possibility of interception. The Starline A94 anti-theft installation integrates a multi-system 2 channel bus. Thanks to the built-in GPS and GSM adapters, the car owner can track the coordinates of the location of his car.

Functions

What functions are implemented to ensure reliable security:

• the consumer has the ability to control additional door locks;
• you can configure the option to disable the standard system if the tailgate is opened;
• if you install an additional blocker, you can set up a simulation of a power unit malfunction;
• You can control the hood lock, only close it, without opening it.

What comfort options are available:

• remote control of the pre-heater, if provided by the machine manufacturer;
• option for automatic return of the steering column;
• function of automatic adjustment of the driver's seat, if it is implemented by the car developer;
• option to automatically activate low-beam headlights when the car starts moving, if the driver releases the parking brake lever or presses on the gas.

Options for automatic engine start:

• the ability to turn off the audio system and windshield wiper blades when the function is activated;
• option for simulating pulses of smart ignition locks;
• the car owner can activate the option of heated windows or heated seats when the remote engine start is turned on;
• option to simulate the second signal of the starter device;
• If the machine is equipped with a Start/Stop button, and an error occurred when trying to autostart and the engine did not start, you can configure automatic reactivation.

What options can be configured when enabling protection mode if the machine supports the following features:

• folding side mirrors;
• automatic closing of the hatch;
• When the security function is activated, you can configure the light path.

The autostudio channel provided a complete online review of all the options and features of the Starline A94 car alarm.

Description of configurations and characteristics

The complete set of systems for models A94 and A94S with a 2CAN module includes the following elements:

• a control module or central unit in which a processor is located that transmits and receives signals;
• one main remote control with two-way communication and a liquid crystal display and a second – an additional one, without a screen, a case for devices must be purchased separately;
• button for mounting on the hood;
• device for receiving and transmitting signals;
• status monitoring diode lamp;
• installation kit for connecting all components;
• a service key designed to adjust and disable the machine “alarm”;
• installation and operation manual;
• service documentation for managing and adjusting the parameters of the GSM tracker, which describes step by step all the nuances of use;
• consumer reminder;
• motor blocking relay with block;
• power unit temperature controller, with its help remote start is configured;
• SIM card for installation in a GSM module.

Specifications

As for the main technical characteristics:

• the control signal frequency ranges from 433.05 to 434.79 MHz;
• number of radio channels for system control – 128;
• the largest range of the main remote control is 800 meters when transmitting control commands to the unit, and if the key fob receives signals, the range can be up to 2 kilometers;
• the auxiliary control panel will be able to operate within a range of 15 meters from the vehicle;
• The tilt and shock controller is an integral type;
• the operating temperature range at which the installation operates correctly is from -50 to +85 degrees;
• DC supply voltage ranges from 9 to 18 Volts.

Safety precautions

When operating a car alarm, it is important to remember that disconnecting the battery when the protection mode is activated can lead to blocking the car’s engine. To start further, the power unit must be unlocked. If the “signaling” is connected independently, then when performing the task the battery must be disconnected in order to prevent possible voltage surges and failure of electrical equipment.

Key fob compatibility.

Key fob compatibility

Step-by-step operating instructions

Using all the functions of the Starline A94 alarm is quite simple, thanks to the detailed instructions for use supplied with the device. It and the user manual contain step-by-step instructions for installing or configuring the system. There are also clear tables from which you can not only find out what buttons 3 or 4 of the control panel are used for, but also how to correctly configure the necessary options using the Valet key. The instructions can be read online in pdf format.

Button combination

Starline A94 is controlled using buttons and their combinations. Most of them are located on two control panels, but in addition to them there is also a Valet service button. It is located inside the car and is used to activate the service mode, programming mode or emergency disablement of the security system.

• turning on and off the security mode - short presses on the first and second, respectively;
• remote engine start - long-term impact on the first key;
• activating automatic winding by timer, alarm clock or temperature - using the cursor and the third button;
• activating silent security mode or deactivating it;
• setting the levels of the tilt and shock sensors - double pressing the second button;
• decontamination of a car engine.

To control the anti-theft complex options, short and long button presses, double clicks and combinations are used.