How to set up the alarm key fob Sherkhan Logicar 4 instruction manual

01/25/2022 1,615 Alarms

Author: Victor

In accordance with the operating instructions, the Sherkhan Magikar 4 car alarm uses its own coding algorithm called MAGIC CODE™ PRO. This allows you to protect the vehicle from both electronic hacking and scanning of the dialog code.

[Hide]

Connecting the key fob to the Sherkhan Logicar 4 alarm system

There are two ways to link the Scher Khan Logicar 4 remote control to the security system: without a PIN code and with its use. Let's look at the instructions without using a password.

Deactivate the vehicle security mode and turn on the ignition. Hold down the “Jack” key for two seconds. The hazard lights will flash once.
You have five seconds to take your next action. Quickly press "Jack". The lights will flash twice.
5 seconds will pass and the LED will light up continuously. This is a signal to start entering remote control codes.
Complete the next step in five seconds. Quickly press the 1st key of the first communicator. Confirmation – the turn signals blink once. Enter the details of the remaining remote control communicators. If the action is carried out successfully, the emergency light will blink once. After entering the data for the third key fob, the light lights will blink twice and the control unit will exit the setup mode.

Procedure for entering a secret code.

Disarm the car and turn on the ignition. Hold “Jack” for two seconds. A single blink of the turn signals will confirm the correctness of your actions.
Within five seconds, click “Jack” once. One light signal will follow and the LED will flash quickly.
Complete the next step in 4 seconds. Click on the "Jack" key. The number of clicks is the first digit of the individual password. How will four seconds pass? the alarm will blink once. This is confirmation of the correct actions. The LED will flash quickly.
Using the same method, enter the remaining digits of the password (two or four).
After entering the last number of the secret code, the LED should be lit continuously. You can enter data for new control devices.
In five seconds. click the 1st key on the first remote control. After the alarm goes off once, press key 1 on the second and third key fobs. After encoding the third switch, the signal will exit the recording, confirming this with a double flash of optical instruments.

Find out how to register your Scher Khan Magicar 9 keychain.

Instructions for setting up a new Magicar 4 remote control

You can program an additional key fob without using a PIN code according to these instructions.

Turn the key three times within 4 seconds to activate the ignition. If the actions are carried out correctly, a single signal from the lighting devices will be given.
Within four seconds, press the 1st button of the first communicator. The hazard lights will flash once. If you do not continue programming, then after four seconds. The emergency light will sound twice and the service mode will be activated.
If you want to enter the data of the second remote control, then no later than four seconds, press the 1st button on it.
Use the same algorithm to register the third key fob.
After entering the last pager code, wait a little without pressing anything, the switch will automatically exit the adaptation mode.

.

An undoubted advantage of having a key fob in the system is its range (up to 1000 m).
A smartphone with bluetooth function cannot do this. An undoubted advantage of having a key fob in the system is its range (up to 1000 m). A smartphone with bluetooth function cannot do this. Finally, about the price issue. The very presence of a Bluetooth module (and these are additional functions of an immobilizer, active tag/hands-free and protection against theft of a car key) is additionally priced at 1,500 rubles. Is it worth it? In my opinion, quite. For comparison: if Mobicar 2, including installation, costs 23 thousand rubles, then the “big brother” Universe 3 costs 45 thousand.

Photo: Mega-F

Anti-theft with bluetooth - why is it needed?

How to flash and reprogram a key fob

You replaced the old remote control device of the anti-theft system (damage) with a new one. Programming uses a PIN code. And you don't know how to set up the key fob correctly. There is nothing complicated about this, follow these steps.

Turn on the programming mode within 4 seconds by turning the ignition on three times. A single activation of the lighting equipment is a signal to begin entering the first secret code value.
The next step must be completed in four seconds. The password numbers are entered by turning on the ignition. The number of key turns is the first digit of Pin. Wait four seconds. A single flash of lighting equipment will follow. This is a signal to enter the second value of the unique code.
Using the same procedure, enter the remaining PIN numbers. Wait until the emergency lights go off once and start recording the key fob.
Within four seconds, press the I key of the first pager. An alarm flash will confirm the correct action.
Program the remaining remote devices in the same way.
Do nothing with the remote control for 4 seconds and it will automatically exit recording mode.

Why can't I bind an additional remote control?

For a number of reasons, you cannot reflash the security system key fob, no matter what you do. What prevents you from connecting the remote control to the alarm control unit:

failure of the remote device;
the “Ignition on” command is not recognized by the system;
“Jack” mode is randomly turned on;
failure of the main unit of the security complex.

Nuances of use

When using this car alarm model, you should pay attention to some features of its operation.

If you start controlling the trunk lock while the car is in security mode, the system will automatically disable the car lock.

"VALET" mode. You can enter it without using the key fob. You just need to turn the ignition on and off in a certain sequence. This process is pre-programmed as a code sequence. This is used to shut down the system in emergency situations.

Interchangeability of switches

If it is not possible to purchase an original remote device, a broken or lost Magikar 4 key fob can be replaced with a Logikar 4. They are completely interchangeable . You can find out more detailed information about the compatibility of remote controls for the Sherkhan anti-theft system from our article.

Find out how to turn on the sound on the Sherkhan alarm key fob.

Author of the material: Dumchenkov Mikhail

Did you like the material? Share with your friends:

Have questions about car repairs? Ask them in the consultation section, to do this, click on the link below.

auto mechanic

New cars 2021
New cars 2022
Test drives
Jeeps
Crossovers

Repair and maintenance Engine
Chassis
Electrical equipment

Alarms
Cigarette lighters
Car Reviews
Photo and video galleries
News
Tires
Celebrity cars

Copying materials is permitted only with an active hyperlink to our website.

Source

Video

User L1DER in the video showed the process of hacking the alarm system for the Sherkhan Magikar car.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes

No (100.00%)

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 1 vote(s), average: 4.00 out of 5)

Discuss the article:

Operating instructions for car alarm Scher-Khan Logicar 4

The Shere Khan Logicar 4 alarm system, the operating instructions for which provides clear recommendations for setup and use, is an anti-theft system equipped with feedback. The system is reliably protected from mechanical and software hacking. It has an alarm and some disadvantages that need to be taken into account when purchasing.

Specifications

The Sher-han Logicar 4 car alarm has the following technical data:

alarm duration - 30 seconds;
type of power source of the head unit - vehicle on-board network with a voltage of 9-18 V;
the frequency of the channel used to transmit data between the key fob and the head unit is 433.9 MHz;
control method - using a communicator, digital vehicle tires and a service button;
the amount of current consumed by the system when in security mode is 15-35 mA;
operating temperature range - -40…+85°С;
the range of the pager when transmitting signals is 800 m;
The range of the key fob in message receiving mode is 1.5 km;
range of the auxiliary communicator - 15 m.

Functions

Alarm system Sherkhan Logicar 4 with auto start has the following functionality:

Two-way communication. The system regularly sends messages to the user about the vehicle's condition. Two-way channels are used to transmit signals. Data is protected by conversational coding, which prevents information from being intercepted by attackers.
Integration into digital vehicle tires. The components are used to control the electronic parts of the car. The use of a CAN bus allows minimizing interference with standard wiring.
Slave mode. To control the anti-theft complex, a standard key fob is used. Protective mode can be activated when the engine is running. Arming is carried out by command or at a time specified by the user.
Automatic engine start. This function allows you to warm up and start the engine at any time convenient for the user. The system evaluates the condition of the starter, taking into account the tachometer readings.
Several types of security. According to the user manual, the driver can turn on the alert mode with or without sound signals. Protection can be activated by entering a code.
Engine operation control. This is done by reading the data transmitted by the tachometer. The power unit can automatically start at a specified time.
Self-diagnosis. The head unit is equipped with a special program that evaluates the condition of the main components of the anti-theft system. To check, the processor module is connected to the computer using a USB cable.
Assessing the condition of the interior. The user can adjust the time when the backlight is turned on and off, and remotely control the windows and trunk.

Advantages and disadvantages

The positive qualities of the Shere Khan Logicar 4 car alarm include the following characteristics:

the presence of auto engine start (the function works correctly on all cars);
ease of installation and configuration (the operating instructions for the 4i contain detailed recommendations with which any driver can correctly install the system);
compact dimensions (the head unit can be placed in any part of the cabin).

The disadvantages include the following:

interruptions in the operation of key fobs (users have to press the buttons repeatedly for the system to accept the command);
small range of action (correct sending of commands is possible at a distance of no more than 100 m);
the possibility of hacking (despite the coding characteristics declared by the manufacturer, attackers can intercept the signal and disable the system);
unreasonably inflated cost (at a relatively high price, the operation of the signaling system is not effective enough).

Key Features

Description of the features of the Magicar 4 anti-theft system:

Automatic start of the car engine using the remote control. This option can be used on vehicles with manual and automatic transmissions, diesel, petrol or gas engines. In the latter case, the power unit should start on gasoline, with a further transition to gas in manual mode. If the engine is diesel, then it can be equipped with a turbine.
Locking the door locks, hood and trunk when setting the protection.
Using the user's personal code. It can be used to configure some alarm functions, as well as enable and disable the security mode.
Ability to change relay type parameters to block the power unit. The device may have normally closed or open contacts.
Selecting the volume of warning and warning signals. The parameter can be changed by the user.
Turning security on and off without triggering the siren.
Possibility of activating silent protection. When the alarm mode is triggered, no sound signals are played.
Uses two universal, user-programmable channels to control additional equipment and devices. You can configure the operation of electric windows, folding side mirrors, sunroof, seat controls, etc. The alarm unit is also equipped with outputs for connecting the standard central locking and alarm systems.
Possibility of controlling the tailgate.
Availability of a special input for connecting negative hood sensors.
Activation and deactivation of door locks in automatic mode when the ignition system is turned on and off.
The “Panic” function is triggered by a command from a pager (remote control). When activated, light and sound alarms are triggered. With its help, the user can scare away suspicious people from the car and designate their vehicle as protected.
Possibility of installing and connecting additional sensors.
Using a highly sensitive shock regulator. The sensitivity level is user adjustable.
Hands-free option. When activated, the security mode is activated with a delay, the time interval is regulated by the consumer. This allows the driver to collect all belongings and lock the doors before the protection is activated.
Two-stage opening of locks. The user can configure the unlocking of these devices, first by command from the key fob, and then by entering a personal password.
Accounting for light delay in the car interior. This will allow the user to pick up all things from the car in the dark with the lights on.
Possibility of priority opening of the driver's door, the option is configured by the user.
Availability of display backlight on the main remote control. Allows you to more conveniently use the communicator at night.
Visual confirmation of executed commands using the screen on the main pager. It displays all information regarding vehicle security and the operation of protective zones.
Ability to remotely configure and disable the sensitivity sensor using a pager. Using the communicator, the user can only deactivate the controller's warning zone.
Using different channels to turn security on and off. An encryption system is used to transmit signals to prevent interception.

Installation and connection

For Scher-Khan Logicar 4, the installation instructions require the following steps:

Preparing the car. Before connecting the alarm, the on-board network must be de-energized. To do this, turn off the ignition and disconnect the battery terminals.
Installation of the processor unit. The device is mounted in a place that is inconspicuous to potential criminals, such as behind the dashboard. To do this, remove the decorative trim of the steering column and unscrew the screws holding the shield. The block is placed in a free space and secured with screws.
Siren installation. The part is installed in a hidden place. The horn must be turned down. The siren must not be placed near the engine.
Installing the Valet button. The part is used for emergency shutdown of the alarm mode, so it must be mounted in a place inaccessible to criminals. The button can be hidden under the standard wiring harnesses and masked with electrical tape.
Installation of limit switches. The kit includes 1 controller, which is equipped with the hood or trunk. The remaining switches will have to be purchased separately. To install the parts, holes are drilled on the doors, after which the decorative trims and handles are removed.
Installing an engine blocker. The device is embedded in the ignition switch block.
Installation of the sensitivity sensor. The part is installed in the middle part of the body. The wiring is routed through holes in the partition separating the engine compartment from the passenger compartment. After installation, adjust the sensitivity of the sensor.

Renault Logan 2014, 102 l. With. — tuning

Car alarms scher-khan magicar a and logicar a

In this article, auto mechanic Alexey Bakulin answers a popular question from readers: “How to start the engine from a Magikar key fob?”

The connection diagram of the 18-pin plug provides for connection to the on-board network, siren and outputs of additional channels. The automatic start unit and the central locking control module are connected separately.

To read the instructions, select the file in the list that you want to download, click on the “Download” button and you will be redirected to a page where you will need to enter the code from the image. If the answer is correct, a button to receive the file will appear in place of the picture.

Now you can put the STSTS in security mode. The engine will run until 2 minutes have elapsed. interval. When the car is put into security mode, the door sensors (hood or trunk) are armed immediately, and the shock sensor, additional sensor and driver call sensor will start working after 30 seconds. after stopping the engine.

User manual

For Logicar 4, the operating instructions describe all actions that may be required when programming and using the alarm.

Turbo timer

To enable or disable the Turbo Timer function, you must simultaneously press keys 3 and 4 on the control panel. To start the mode after a trip, you need to:

set the gear lever to neutral position;
turn off the ignition;
leave the car and close the doors (the alarm produces several light signals).

Setting the time

To set the time you need to do the following:

press buttons 2 and 3 on the key fob (the Pro9 indicator will appear on the display);
hold down 1 key for a second (the current time indicator will flash on the screen);
by pressing button 1 change the hour value, using button 2 to select the minutes);
press buttons 2 and 3 simultaneously.

Reset

For Scher-Khan Logicar 4i, the instructions prescribe the following reset algorithm:

simultaneous pressing of buttons 1 and 4;
pressing key 3 three times (the siren will sound 3 beeps and the turn lights will flash).

The alarm settings will then change to the basic ones.

How to enable autorun

To enable automatic start by time, you need to hold down keys 1 and 2. Afterwards, it is recommended to press button 4 10 times in succession. Having switched to time mode, use keys 1 and 2 to select the parameter value. The timer will turn on after pressing buttons 2 and 4 simultaneously. Autostart by temperature is configured by pressing keys 1 and 4 on the key fob. To enter the menu, press button 4 15 times. The temperature value is selected using 2, 3 or 4 keys. Activate the function in Logic 4 by pressing buttons 2 and 4.