Setting up an alarm with auto start Scher Khan Magicar 5

Starting a car engine using a remote control is very useful. Allows you to warm up your car in the cold season without leaving home. And also remotely turn off the engine if you are delayed somewhere, preventing it from overheating. How to start a car using the Sherkhan key fob? There is nothing complicated about this. To quickly and correctly set the autostart time, carefully read the operating instructions, which describe all the functions of the anti-theft system.

Setting up autorun from the Sherkhan Magikar remote control

Which key fob buttons should be pressed when setting up the autostart function of this car alarm model? The instructions for starting the engine from the key fob are universal and are suitable for Magicar A, B, 1, 2, 3, 4, 5, 6 mini, 6, 7 S, 8 S, 9, 10 mini, 11, 12, 13, 14.

1. Enter menu 2 by holding down keys 2 and 4 simultaneously for two seconds. A beep will sound and the lights will blink once.
2. Select the desired option (2-20) from the menu by clicking button 4 twenty times. Each press must be accompanied by sound and light signals.
3. After a few seconds, the device will confirm that the desired mode has been selected correctly with twenty beeps.
4. Starting the engine from the remote control is programmed with button 4. Confirmation of this is four sound signals and blinking emergency lights.

After this, hold key 2 on the key fob for two seconds. The car will be armed and the engine will start. The headlights will light up once and an alarm will sound. A tone squeak will be heard on the key fob, and information about the operation of the motor will appear on the display. You can set the operating time (5, 15, 25 or 45 minutes) by entering function menu 1-12.

System overview by model range

First of all, you need to insert the battery into the remote control. It comes complete with a keychain. After installation, you can turn on the remote control. It has 4 buttons and a display. The set of functions includes vibration alert and automatic backlight. The screen displays information about the state of charge of the battery and temperature indicators inside the car.

Alarms in this series have low power consumption, allowing the use of one AAA battery for 4 months.

You will find the list here in your user manual. When making a purchase, check both the completeness and integrity of the wire insulation. The latter is important, since used goods show various damage: shortened wires, scratches, etc. Good luck with your choice!

The auto engine start function is available in such models as Magicar 7S, Magicar 7H, Logicar 3i, Logicar 4i, Logicar 5i, Mobicar 11, Mobicar A v. 1.0 and Mobicar A v. 2.0.

We start the car using the Scher-Khan Logicar key fob

Logicar anti-theft system models A, B, 1, 2, 3 i, 4 i, 5i, 6i, 5 iS, 6 iS are easy to operate. All actions are performed on the main key fob with a display; put the spare one aside. Configure autorun using the following algorithm.

1. By simultaneously pressing keys 2 and 4 on the remote control, activate the timer.
2. To enter programming mode, press and hold for a few seconds. buttons 1 and 4.
3. Activate the timed engine start by pressing key 4 ten times.
4. Set the time to turn on the car engine: once a day – key 1; after eight hours – 2; in four hours – 3; in two - 4.
5. Pressing 2 and 4 at the same time will turn on the timer.

After studying the instruction manual, you will be able to set the engine start temperature and set its warm-up settings.

Equipment characteristics

The device has a mini-USB port, which can be used to update software. The vehicle equipment has a built-in dual-band system, which ensures the most accurate signal capture. The car alarm has a special encryption algorithm, which eliminates the possibility of hacking the system.

You can put the device into security mode automatically, which ensures the most convenient use. Thanks to innovative developments that are used during the production of the device, ease of use is ensured. The operating instructions will tell you more about this.

During the theft of a car, the anti-burglar system is activated, with the help of which it is immobilized. Support for the external autorun module is provided by a universal function. Car alarms for vehicles are made from high-quality raw materials, which guarantees them wear resistance and durability.

Keychain communicator

• Multifunctional 4-button key fob communicator with liquid crystal display
• Protection against interception of code messages MAGIC CODE™ PRO 2

• Turning the security mode on and off using different buttons

logicar-3-4.png

• Audiovisual confirmation of executed commands
• Vibration call
• Long-distance communication with the processing unit (up to 1,500 m)
• Synchronization of readings of all key fobs recorded in the system memory
• Indication of the presence of a feedback signal
• Ability to drive a second car
• Automatic display backlight
• Key fob battery low indicator
• Key fob battery voltage indication
• Vehicle battery voltage indication
• Temperature display inside the car
• Battery Save Mode
• Current time display
• Alarm function
• Indication of engine operating time in Pit-Stop and Turbo modes
• Sound and visual reminder when receiving an alarm message
• Key fob key lock
• Operational programming of all system functions from the key fob
• Economical power (one AAA element)

Processing unit

1. Coordination with vehicle information buses CAN, K-LINE
2. Possibility of automatic engine start on cars with automatic or manual transmission (additional option)
3. Monitoring engine starting using tachometer or generator signals
4. Personal code for disarming the system if the key fob is lost (PIN code)
5. System control from the car's standard key fob (optional)
6. Control of the factory security system from the Scher-Khan key fob (optional)
7. Two-step disabling of security (possible using a personal code)
8. Car security mode with the engine running
9. Security mode without siren warning signals, without siren alarm signals (programmable function)
10. Power output for car central locking control
11. Driver's door priority unlocking (programmable feature)
12. Power output for trunk release (programmable function)
13. Power output for alarm control (two circuits)
14. Programming the blocking relay type
15. Five universal programmable channels for controlling additional devices with the ability to change operating algorithms
16. Interior light delay accounting (programmable function)
17. Possibility of connecting negative and positive door sensors
18. Selecting the duration and number of door lock control pulses
19. Locking and unlocking doors when turning the ignition on and off
20. Turbo timer mode with variable engine turbine cooling time
21. Monitoring engine operating intensity using a tachometer signal
22. Pit-Stop mode
23. Automatic arming (program function)
24. Automatic return to security mode if the door is not opened (programmable function)
25. Panic Mode or JackStop™ (Programmable Feature)
26. Possibility of diagnosing and configuring the system via connection to a USB port of a computer using the Scher-Khan OpWin diagnostic program

A detailed overview of the main technical parameters of the Sherhan car alarm system:

• the duration of the sound signal on the siren or steering horn is 30 seconds;
• Alarm impulses can be triggered using external vehicle lighting devices;
• a communicator is used for control; data is transmitted via a frequency radio channel of 433.92 MHz;
• When surges occur, the voltage in the on-board network should be in the range from 9 to 18 volts;
• The system can be controlled automatically, as well as through a special one;
• the amount of current that the alarm consumes when the security mode is turned on is from 15 to 35 mA;
• The service life of the batteries in the main key fob is about four months, in the additional one – up to three years;
• the temperature range for performing all alarm functions is from -40 to 85 degrees;
• microprocessor module weight - 230 grams;
• The main communicator (remote control, pager) uses 1.5 volt batteries, and the additional communicator uses 6 V batteries.

Instructions for Mobicar models

Remote engine start from the Mobicar A, B, 1, 2 alarm remote control is only possible in security mode. For a manual vehicle, carry out the following preparations.

1. With the engine running, the handbrake raised, and the brake pedal released, press key 3 on the key fob.
2. Remove the key from the ignition.
3. Get out of the car and arm it by clicking on button 1.

The following key combination will enable autorun.

1. Press button 3 for a while. An image of smoke will appear on the screen, indicating the engine is starting.
2. The autostart time will countdown. Briefly press 3 and you will stop the timer.
3. The mode is exited by long pressing key 3.

You can also set the autorun time manually by carefully reading the instructions.

Installation and connection

For Scher-Khan Logicar 4, the installation instructions require the following steps:

1. Preparing the car. Before connecting the alarm, the on-board network must be de-energized. To do this, turn off the ignition and disconnect the battery terminals.
2. Installation of the processor unit. The device is mounted in a place that is inconspicuous to potential criminals, such as behind the dashboard. To do this, remove the decorative trim of the steering column and unscrew the screws holding the shield. The block is placed in a free space and secured with screws.
3. Siren installation. The part is installed in a hidden place. The horn must be turned down. The siren must not be placed near the engine.
4. Installing the Valet button. The part is used for emergency shutdown of the alarm mode, so it must be mounted in a place inaccessible to criminals. The button can be hidden under the standard wiring harnesses and masked with electrical tape.
5. Installation of limit switches. The kit includes 1 controller, which is equipped with the hood or trunk. The remaining switches will have to be purchased separately. To install the parts, holes are drilled on the doors, after which the decorative trims and handles are removed.
6. Installing an engine blocker. The device is embedded in the ignition switch block.
7. Installation of the sensitivity sensor. The part is installed in the middle part of the body. The wiring is routed through holes in the partition separating the engine compartment from the passenger compartment. After installation, adjust the sensitivity of the sensor.

Connection diagram

The system components are connected to the head unit and power source according to the diagrams attached to the instructions. All power circuits are equipped with fuses of the appropriate rating. After connecting the cables, you need to check the functionality of the car alarm.

Why doesn't the car start with the Scher-Khan Universe pager?

Anti-theft systems Sherkhan Universal 1, 2, 3 are equipped with voice control and remote control via GSM communication. To enable autorun, do the following.

1. Press the # button for a few seconds. In this case, the engine should be running and the parking brake should be engaged.
2. Remove the key from the ignition.
3. Arm the alarm and press # for two seconds. The car should start with the key fob.

But there are times when the car does not start from autostart. The starter turns, but the engine is silent. This does not depend on the brand of the car; it can happen with both imported cars (Ford Focus, Hyundai Solaris) and domestic ones. Robot or mechanical box. This may happen for the following reasons:

• low battery charge;
• low engine temperature in winter;
• immobilizer malfunction preventing remote start;
• problems with the electrical equipment of the car;
• breakdown of the systems responsible for starting the engine.

Functions

The security system firmly protects the car from intruders. It is possible that the machine will be armed in delayed mode. The creators have provided that the alarm can be turned on in hidden mode. In this case, the system does not make sounds and there is no light signal.

Advantages and disadvantages

The Scher-Khan Magicar 8 security alarm responds to a signal at a distance of 2 km. By purchasing a security system, the car owner will have the opportunity to arm a second vehicle. The key fob operates in energy-saving mode; it is possible to synchronize several such devices.

The system features a long warranty service of up to 5 years.

Its disadvantages include the fact that at low temperatures it can work intermittently. If associated with the 8S model, the functionality of Magikar 8 looks outdated.

If you read the reviews from the owners, it will become clear that with self-installation there may be difficulties with the correct connection of the parts of the security system, therefore the work should be done strictly according to the instructions.

How to turn on Webasto from the Sherkhan remote control button?

What do you press on the Scher-Khan key fob to start the preheater?

1. The device communicates with the switch via an additional channel. This could be key 2.
2. Pressing button 2 for more than two seconds turns the heater on and off.
3. The Webasto timer does not need to be used.
4. The pre-heater should only be connected to a car alarm in specialized centers.

The engine started, but it doesn’t show on the key fob

If the car was started not from an additional key fob, but from the main one, and incorrect information is displayed on it, then you should look for an error made when installing the alarm system.

Check that each connector on the main module is connected correctly. If there is no malfunction, contact a specialist.

Anti-theft systems are constantly being improved, protecting your car from break-ins and theft.

This is a necessary security measure even for those drivers who leave their cars in garages or paid parking lots; even they do not always save them from theft.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Thus, the Scher-Khan company offers several versions of protection systems: MOBICAR, UNIVERSE, MAGICAR, LOGICAR. All of them have the ability to configure auto-start alarms and provide a high level of protection for your car against theft.

Possible alarm malfunctions

Setting up an alarm with auto start scher khan magicar 5

When using the alarm for a long time, malfunctions are possible:

1. The key fob does not work. The batteries may be low and should be replaced. Interruptions in the operation of the communicator also occur due to moisture ingress - the microcircuit needs to be cleaned.
2. Autorun does not work. Due to incorrect placement of system components or damaged wiring. In this case, the installation is carried out again, taking into account the recommendations set out in the instructions. Damaged wires are replaced.
3. The engine lock was activated automatically. The problem arose due to a breakdown in communication between the alarm blocker and the standard immobilizer. The latter must be deactivated.

If the above steps do not help, you need to contact a car service.

source

How to set up a MOBICAR car alarm

The MOBICAR system implements modern developments in the field of car protection against theft. The package includes a compact control key fob, digital shock sensors, and a small processor unit. It’s not difficult to understand the setup, despite the large number of built-in functions.

Among the main functions that need to be configured in the MOBICAR car alarm are:

• car autostart;
• setting automatic alarm activation;
• sensitivity adjustment;
• turning the shock sensor on and off.

The first thing you should learn is to start and stop the car using the key fob. This is a convenient feature that allows you to warm up your car in winter while you are leaving the house. Or turn off the engine if you stay in the store for a long time, so as not to overheat the vehicle.

Setting up engine autostart

You can start the engine remotely from the key fob only in security mode. For a vehicle with a manual transmission, it is necessary to prepare for starting, for this:

1. With the engine running and the doors closed, as well as the parking brake on and the brake pedal lowered, press button III of the key fob.
2. If the car has an ignition switch, the key must be removed under the conditions described above. If there is a Start/Stop button, you do not need to press it.
3. After the completed manipulations, get out of the car and press the security button (short press the I button).

To autostart Scher-Khan on this alarm model, you must press the following buttons:

1. Long press on “III”, and an image of smoke will appear on the key fob, which means the engine will start.
2. The autostart time countdown will begin; to restart it, briefly press the same button.
3. To turn off the mode, hold III on the key fob until a beep sounds.

You can set the autostart time manually, and also select the mode to turn off the motor at a given temperature. For this:

hold I+IV

When setting the warm-up time, you need to take into account the climate mode, and you can also select the functions of morning and evening autostart. With such simple manipulations with the key fob, you can set any car to autostart. Do not forget that with a manual transmission it is necessary to carry out preliminary preparation according to the instructions described above.

Switching to car control after autostart

After performing a remote engine start, you should take control of the car into your own hands when you get to it. For this:

• press the brake pedal;
• disengage the standing brake;
• remove the automatic transmission from parking mode.

In this case, you do not need to press anything on the key fob. After performing one of the listed manipulations, you will hear a sound signal and one blink of the headlights, which indicates that autostart is disabled.

Technical properties

Sherkhan Magikar 8 is installed both on passenger vehicles and trucks. The alarm is suitable for commercial vans, minivans and other equipment.

If we associate this model with the previous ones, for example, Magicar 2, 5 or 7, then the eighth model is the most advanced. But it is inferior to devices of the next generation - 8H, also 10, 12 and 14 versions.

If there are free funds, car owners can purchase extreme models, and the eighth version is distinguished by its reliable operation. It will protect your vehicle from theft.

The Magicar 8 Scher alarm was updated in 2011. The creators added a number of functions and modernized those components that were considered outdated.

For example, the eighth model uses the MAGIC CODE™ PRO 2 method for encryption; it protects against scanning and electrical hacking.

After encoding, the signal is transmitted over a frequency that cannot be intercepted.

Having a key fob in your hands, you can transmit a signal to the central control unit while being at a distance of up to 2000 m. The system works without failures even on the streets of large cities. By installing an alarm on 2 cars, you can control them from 1 key fob.

The alarm system is equipped with a transceiver of the highest quality. There may be an immobilizer mode connection. This allows you to shut off the motor after a certain time, even if the system was not turned on.

Equipment

The package includes a processor unit, and a key fob communicator is used for control. The Scher-Khan Magicar 8 car alarm has an additional key fob, which can be useful if the main one fails.

There is also a shock sensor, the creators attached a CN 5 cable to it. The list includes a call sensor from a typewriter, a CN 6 cable is connected to it.

The kit includes an antenna unit, a temperature sensor and other devices. The manufacturer supplied the alarm with an instruction manual and installation instructions.

Setting up autorun UNIVERSE

The UNIVERSE car security system is more modern than the previous version. It has voice control and a remote control system via GSM communication. To enable autorun:

1. With the engine running and the parking brake raised, press and hold the # button.
2. When the ignition support mode turns on, you should remove the keys from the lock and get out of the car.
3. Put the car in security mode and press #, holding the button for at least 2 seconds.

This way you can start the car remotely.

It is more convenient to make all settings, including setting the engine operating time, through a mobile application, which is very easy to understand. There is also a function to disable autostart of the car.

Equipment

The Sherkhan Logicar 3 signaling kit includes the following products:

• technical documentation (installation and use instructions, technical passport, warranty card);
• head unit equipped with a protective relay;
• main pager with display;
• a spare key fob without a screen;
• a set of connectors for connecting the engine blocker and other modules;
• antenna unit with adapter, wire and block;
• engine temperature sensor (supplemented with a cable and terminal for implementation in the on-board network);
• emergency button equipped with a cable and an LED element;
• shock sensor with installation wire;
• cable for integrating the system into the vehicle’s CAN bus;
• limit switch mounted on the hood or trunk, with an installation cable;
• ignition system interlock with a wire for interaction with the head unit;
• siren;
• set of fasteners;
• a programmer used to configure the system by synchronizing with a computer;
• engine immobilizer bypass.

The security complex is equipped with the following functions and modes:

1. Dynamic signal coding. Protects the system from hacking by intruders.
2. Light and sound confirmation of actions. The warning indication of the key fob can be turned off. Data on the state of the anti-theft complex is reflected on the pager display.
3. Automatic engine start. The engine can start at a specified time, temperature or at certain intervals.
4. Monitoring the voltage in the vehicle's electrical network. When the specified parameter decreases, the system will notify the user.
5. Activation and deactivation of alarm functions via keyless entry.
6. Interaction of system elements carried out using the vehicle’s digital buses. Provides higher data transfer speeds.
7. Slave mode. A standard car key fob can be used to control the anti-theft system.
8. Possibility of setting the alarm in security mode while the engine is running.
9. Possibility of entering an individual password requested when enabling and disabling anti-theft functions. The code can be used if the key fob is broken or lost.
10. Quiet security mode. When this function is launched, only the light indication is activated, there is no sound notification.
11. Controlling the central locking unit using the ignition key.
12. Automatic resumption of protective mode in case of spontaneous deactivation.

The advantages of the system under consideration include the following qualities:

• increased range of the key fob;
• expanded set of functions;
• protection against automatic engine start when the gear is set in a car with a manual transmission;
• a bright display that makes it possible to read information at night.

The disadvantages of Sherkhan Logikar include the following:

• Unreasonable activation of the alarm mode;
• unclear instructions;
• increased sensitivity to radio interference;
• incorrect operation in hot weather;
• vulnerability to code grabbers;
• reduction in the range of the key fob during prolonged use.

MAGICAR model settings

This car alarm model is characterized by a high level of reliability and ease of control. To avoid errors while setting up the autostart system, do not forget to turn off the engine and turn on the security mode.

Here are some useful commands executed from the key fob:

Calculate the timing of cranking the starter so that the car has time to warm up before you arrive.

All Sherkhan alarm systems are highly reliable, so all malfunctions in the settings are most often caused by the inability of car owners to use the security system. Read the operating instructions carefully to avoid any difficulties.

Video

The “Alarm Installation Center” channel showed an example of self-flashing the microprocessor module of the Sherkhan Logicar 4 system.

The Shere Khan Logicar 4 alarm system, the operating instructions for which provides clear recommendations for setup and use, is an anti-theft system equipped with feedback. The system is reliably protected from mechanical and software hacking. It has an alarm and some disadvantages that need to be taken into account when purchasing.

Setting up LOGICAR

The latest model is also easy to operate. To configure autorun, all you need to do is:

1. Turn on the timer on the key fob by simultaneously pressing II and IV.
2. Set the required time by entering the programming mode by long pressing I + IV.
3. To activate the timed engine start, press IV 10 times in a row.
4. You can set the time to turn on the motor once a day (I), at 8 hours (II), 4 hours (III) and with an interval of 2 hours (IV).
5. After setting the parameters, turn on the timer by holding II and IV briefly.

The instructions for the car alarm describe in detail how to set the temperature start, as well as the engine warm-up settings. However, they are not very different from the models described above.

To make it easier to understand the features of Sherkhan alarms, watch the video on the topic:

To autostart Sherkhan 5 from the key fob, you must press and hold for at least 2 seconds button II, as shown in the figure.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

In this case, the car will forcibly go into security mode when the engine is running. The doors will automatically go into closing mode, after which the system will set to engine start mode. If the engine starting process is successful, then the key fob will display information about the time remaining until the engine stops running in minutes and seconds, and smoke from the exhaust pipe. This time can be programmed in modes of 15, 5, 25 minutes or 45. To make a trip without stopping the engine within the programmed autostart duration, you need to open the driver's door, then install the key in the ignition switch, turn it to the “Ignition On” position. The period of time between opening the door and turning on the ignition mode is limited to 20 seconds. This event is intended to increase the vehicle's protection against theft during the warm-up period. If within 20 sec. The ignition will not be turned on and the engine will turn off.

Device Features

The device has a built-in power blocking relay, which provides a lot of convenience during its use. A special device system provides separate control of vehicle systems such as doors and trunk. Equipping the alarm with a special dialogue code eliminates the possibility of it being opened by robbers. This vehicle equipment is characterized by:

• Multifunctionality;
• Wear resistance;
• Good performance.

Car alarms are characterized by the presence of various alert melodies, so the car owner can choose the most suitable one. The device is characterized by a low level of noise output, which guarantees the highest degree of comfort during its use. On-board network voltage control is provided by a universal system.

If the need arises, a single-wire blocking relay can be used. The device records alarm events. If it cannot transmit them directly to the key fob, then they are recorded in the base unit. More detailed information is contained in the operating instructions.

If there is a threat to the car, both voice and sound alerts can be sent to the key fob. The scher khan logicar 3 device is characterized by the presence of built-in memory.

This allows the car owner to learn about previous alarms. You can control your vehicle equipment from a distance using a key fob, which is characterized by the presence of ergonomic buttons.

The device has a fairly simple setup system, which allows the user to do it independently. Thanks to the plastic casing of the equipment, the possibility of damage during operation is limited.

Programming autorun time intervals

The car alarm provides programming of time intervals (autostart time) after two, 4 and 8 hours. The choice of a specific option is made depending on the operating conditions of the vehicle, the condition of the engine and battery. To start the programming operation, press and hold buttons I and II simultaneously. Next, you need to perform the following operations in the following sequence:

1. Turn off the “timer” option (if it is activated) by briefly pressing buttons II and IV simultaneously. The “timer” on the display should be deactivated.
2. Press the IV button thirteen times. Each entry is confirmed by one siren signal.
3. Wait until the siren gives 13x audio confirmation of the entered information.
4. Use the key fob buttons to confirm the selected autostart mode. Button II corresponds to autostart mode after 8 hours, III – after 4 hours, IV – after two hours.
5. Set it to autorun by turning on the “timer” mode by briefly pressing buttons II and IV simultaneously.

Reprogramming autostart mode based on interior temperature

To correctly activate autostart based on the interior temperature characteristics, it is necessary to activate timed start modes (1-13) before enabling the programming option. Next, you need to switch to programming mode by long pressing the corresponding key fob buttons I + II. Then the following operations are performed:

1. Turn off the “timer” mode (if it is activated), as described in the previous paragraph.
2. Methodically press the IV button 21 times, after which the siren will sound.
3. Wait for the siren to sound 21 times in a row.
4. Set the required autostart temperature mode: button IV – plus 60 degrees Celsius, III – minus 25, II – minus 15.
5. Activate the "timer" mode.

Warm-up programming

The warm-up time can be set at fixed intervals of 5, 15, 25 minutes or 45 minutes. To do this, activate function 1-12 in mode II. The programming input is entered by long pressing I + II, after which the following operations are performed:

1. The IV button is pressed twelve times (accompanied by a sound signal).
2. The siren beeps 12 times – confirmation.
3. The engine operating time is selected by activating buttons I (5 minutes), II – 15, III – 25 or IV – 45 minutes.

Autorun problems

Some cars experience the following autostart problems:

1. When the ignition is turned off, the car does not stall. To disable autostart, you need to open and close the doors. To correct the problem, function 1-16 (button option II) is required. In this case, to turn off the engine, you must switch the key to the “Ignition Off” position.
2. Enabling the “Valet” mode after emergency disarming of the alarm system (zzzz symbols on the key fob). To fix the problem, you need to simultaneously press buttons I+III for a long time (more than 2 seconds).
3. If you urgently need to turn off the car using the key fob during the autostart period, you need to press button II for a long time.