How to set up a turbo timer on a Sherkhan alarm system?

How to enable auto start on the Sherkhan 7 alarm system?

Procedure for enabling autorun

engine on
the Sherkhan 7
is quite simple. You need to press button 2 (II) for 2 seconds and release. After pressing the button, the system will arm the car, close the doors and start the engine. After the engine starts, the key fob display will show a countdown of the engine start time.

Interesting materials:

What are the disadvantages of laser hair removal? What diuretics? What can be the consequences of cystitis? What can be the consequences after taking birth control pills? What are the best freezers? What are the best motorcycles? What are the best mp3 players? What men's perfume is trending now? What men's sneakers are in fashion 2022? What men's shoes are in fashion 2020?

Should I turn it off or not?

When “Turbo” is activated, the car is set to alarm with the engine running, and then it is automatically turned off. This is done so that the turbine cools gradually and does not become deformed. After stopping the vehicle, the engine should run for about 5 minutes. You can organize the necessary delay yourself by leaving the engine on for 5-10 minutes after stopping the vehicle and letting it idle.

For motorists who do not want to sit in the car for this period of time, the turbo timer built into the Scher-Khan Magicar 5 alarm comes to the rescue. If it is activated, the car owner can lock the car, leaving the turbocharged engine on. After a predetermined period has expired, the device stops the operation of all parts of the vehicle.

This function is activated by default in accordance with the factory alarm settings: the engine idles for 2 minutes after the end of the trip. It helps not to change the turbine for a long time, but requires additional fuel consumption. Many car owners like to turn off the turbo mode on the Sherkhan 5 Magikar to save on gasoline. Some people find it scary that their car is running without them being there. These reasons are not sufficient reasons to disable the feature.

Enabling and disabling Turbo mode on Magikar 5

When operating a car that has a turbocharged engine, special maintenance methods are used:

To prevent destruction of the injection mechanism, the car should not be turned off immediately after stopping.
To eliminate the waiting time for the turbine to cool down, they resort to using a turbo timer.
The Magikar 5 alarm makes it possible to cool the turbine without being in the car. The engine runs for about 2 minutes after the ride is completed.

To enable or disable this mode, you must press keys III and IV for a short time. The status of the function will determine which signals or icons are displayed on the key fob.

How to use the turbo timer

Every car owner should know how to disable Turbo on Sherkhan Magikar A and other models. In most devices, the combination discussed above works. To activate the mode after completing a trip, take the following steps:

Close the doors.
Set the gearshift lever to neutral for a manual transmission or to P for an automatic transmission.

Turn the key in the lock from the On to Off position. In this case, the engine remains in the running position for a certain time.
Get out of the car and close the doors. If you open the doors immediately, the operating time of the TURBO mode will be reduced to 20 seconds.

After completing these steps, you can activate the security mode. To do this, press the I button, after which the locks will close, the starter will be blocked, but the engine will run for the entire period set for the turbo timer. After turning on the security, the door, trunk and hood sensors are immediately protected, and the shock sensor works within 30 seconds after the engine is turned off. As soon as the doors open, the door, trunk or hood sensor is immediately triggered, and the car goes into alarm mode. You can turn off the alarm only with a button.

Purpose of the buttons

The buttons on the communicator support 4 types of operation:

short exposure;
long (more than 2 seconds) press;
quick complex impact on 2 keys;
long-term joint holding of 2 buttons.

The driver is given the opportunity to turn on or off the security mode, activate remote start, as well as other functions. More detailed purpose of the buttons is indicated in the attached instructions.

Possible malfunctions of the Scher-Khan Magicar 5 alarm

If the autostart stops working and the engine does not start, the reason depends on the nature of the failure:

The power unit does not start, but the car owner has completed the reservation procedure. With such a problem, the first reason why the options do not work may be oxidation of the contacts on the safety device. The element is installed in the power supply circuit of the main module. The reason may also be the incorrect operation of the standard blocker bypass device. It is possible that the contact elements in the control relay may become stuck.
The engine starts, but stops after a few seconds of operation. If you start the engine with the key, it will turn on. The problem may be a failure of the five-pin relay, which is located in the microprocessor module.
Incorrect setting of the autorun function. To solve the problem, you need to reset all settings of the anti-theft system to factory settings. The option values are then readjusted.
The problem may lie in the activated Valet service mode. If this function is enabled, the diode element will light without interruption. After disabling the service mode, the function will resume.

How to disable the turbo timer

Turbo is a useful option that allows you to extend the life of the turbocharger. But there are situations when it is necessary to disable the turbo timer on Sherkhan Magikar 5. The action algorithm is as follows:

Take the main security system key fob.
Press buttons III+IV.

Wait for confirmation to disable the option. If you managed to disable the Turbo mode on Sherkhan Magikar 5, the siren and hazard warning lights will sound twice each. The LED indicator lights up twice. In addition, the headlights and the lock image should flash five times, after which the Turbo symbol previously provided on the screen disappears. It is located above the car icon and the inscription ZZZ.

Knowing how to disable Turbo on Sherkhan Magikar A or another model, you will be able to control the function and activate it as needed.

Which models have it?

A turbo timer is provided on almost all alarm models Sherkhan Magikar 5, 6, 7, 8 and others. The system is also provided on the security systems Logikar A, Magikar A, etc. Detailed information regarding the availability and operation of this function can be found in the car manual.

Knowing how to disable the turbo mode in the Sherkhan alarm system, you can easily activate or deactivate the option when it is not needed. For owners of cars with a turbine, its presence is indispensable.

In the comments, share how you use the turbo timer on Sherkhan Magikar 5, how you can disable it, and how necessary this option is.

Is it necessary to install a turbo timer on a diesel engine?

As you know, diesel engines, in the vast majority of cases, are equipped with turbines that pump air into the combustion chamber. It is to extend the life of the turbine that a turbo timer

. ... If you turn off the power unit immediately after stopping, the heated turbine components will cool down too quickly.

Interesting materials:

When to replace tires with summer ones? DSLR vs mirrorless camera, which is better? What is a SLR camera? What is a jacquard towel? What is liquid key? What is power steering fluid? When should I change power steering fluid? When is it legal to change your shoes on winter tires? When is it legal to install winter tires? When is it legal to change winter tires?

Comparison of installation with and without alarm

If you install a turbo timer together with an alarm system, then the main advantage is the smaller number of elements compared to the separate installation of each unit. This option is well suited for new cars that do not have a security system. If you have an old, unreliable alarm system, a comprehensive replacement is also recommended.

If there is a good, previously installed alarm system, it should not be dismantled. Even if there is no separate channel for the turbo timer, there are options for installing it. The advantage of such an installation is the ability to create a system that is more secure from the actions of intruders.

Device activation

After completing the setup, you must select the desired option to turn on the device. The Apexi turbo timer allows activation in the following ways:

after turning on the handbrake and turning off the ignition;
using a key fob, after arming the car;
when securing the car with the parking brake.

The implementation of how to disable the turbo timer for each model is done differently. Usually it is enough to perform the reverse actions of activation. If the turbo timer is not in demand, you should deactivate the icon on the key fob.

Setting up the shock sensor

To carry out adjustment work, it is necessary to find the place where the shock sensor is attached. The device is usually easy to configure. If you have any difficulties with the search, you should contact the service center.

The shock sensor changes its sensitivity depending on the position of the regulator located on it. Turning it clockwise increases the device's response to impact. By rotating the knob in the opposite direction, the sensitivity decreases. In the extreme position the sensor is turned off.

Setting autostart time

Owners of the Magikar 5 anti-theft system can program time intervals for engine auto-start (after 2, 4 and 8 hours) using a timer. To do this, follow these steps.

By simultaneously pressing keys 1 and 2, enter programming mode.
If the timer is on, turn it off. To do this, briefly press keys 2 and 4. The inscription “Timer” should disappear from the display.
Briefly click on key 4 thirteen times. Each press is confirmed by a single sound of the siren signal.
Select the desired engine autostart mode. Key 2 – after 8 hours, 3 – after 4 hours, 4 – after two hours.
Turn on the timer by pressing keys 2 and 4 simultaneously.

You can program the warm-up of the car engine at fixed time intervals: 5, 15, 25 and 45 minutes. Press buttons 1 and 2 to enter the menu and do the following.

Press button 4 twelve times. Twelve siren beeps should sound.
Select the required engine operating time by activating the following buttons: 1 key – 5 minutes, 2 – 15 minutes, 3 – 25 minutes, 4 – 45 minutes.
Pressing keys 1 and 2 simultaneously will exit the programming mode.

Find out how to change the battery in the Sherkhan key fob.

Pros and cons of a turbo timer

When analyzing the features of a turbo timer, it is necessary to understand its advantages and disadvantages. Car owners should know these features before installing the option.

Pros:

Increased turbine life due to reduced risk of overheating and compliance with manufacturer’s recommendations.
Save time. The turbo timer controls the operation of the engine after the car owner leaves the car and turns off the engine after a set period.
Ease of use. Turning on and off the turbo timer on the Sherkhan 5 key fob is a matter of one second.
Reducing the risk of errors. Programming the function allows you to avoid deviations from the rules for using the device. Those at greatest risk are car owners who have switched from a naturally aspirated car to a car with a turbocharged engine.

Flaws:

Reduced security level. After the owner leaves, the machine continues to work for some time. During this period, the risk of theft increases.
The need for management. The car owner must know how to turn on and off the turbo timer on the Sherkhan alarm system. For this, a special combination of buttons is used that you need to know.

User manual

In accordance with the technical manual, before using the alarm, a power source must be installed in the remote control. The battery is inserted into a special compartment located behind the back cover. When installing batteries, polarity must be taken into account.

Using all Sherkhan Magikar alarm options is possible only after linking the communicator to the control unit.

Designations of buttons and symbols on the key fob

Remote control elements:

Buttons on the Sherkhan device

Designation of symbols located on the key fob display:

A - turning on the car engine according to the timer;
B - the turbo timer of the power unit is activated or turned off;
C - function of passive activation of the protection mode;
D — automatic arming without using a key fob;
E — indicator of the activated alarm mode;
F — alarm sensitivity sensor is deactivated;
G—vibration mode for alerting the user is enabled;
H — option to control door locks from the ignition system;
J - the tailgate of the car is not locked;
K - engine running indicator;
L — current alarm state, door locks are locked or open;
M - one or more car doors are not locked;
N — display for displaying information about the current time and air temperature for autostart;
O — the service mode for servicing the anti-theft system is activated;
P - the alarm is turned on or the user forgot to turn off the external optics;
Q—the warning or alarm zone of the shock sensor has triggered;
R—battery charge indicator in the key fob;
S—displays the level of the communication signal between the communicator and the transceiver.

Indication of the main remote control Sherkhan

Table: button assignments

Identification of commands that can be executed using the communicator controls:

Setting alarm time sherhan

In addition to automatically starting the engine using a control signal from the key fob, magicar 5 has the ability to start the engine using an internal timer. In this case, the icon appears on the display. For the function to work correctly the first time you use it or after replacing the battery in the key fob, you must set the clock. It is performed in the following sequence:

Press and hold the combination of buttons “II” and “III” for 2 seconds. The key fob programming will be activated, accompanied by a sound signal.
Press “I” for half a second. The time will begin to flash.
Use the “I” and “II” keys to set the hours and minutes respectively.
To fix the set values, you need to leave the programming mode by simultaneously pressing “II” and “III” for two seconds. This process will be accompanied by a sound signal.

Incorrect time setting will lead to desynchronization of the key fob readings with the real clock. Because of this, it is not possible to correctly adjust the automatic start by timer. The start of warming up the engine and interior will occur earlier or later than the car owner’s expectations.