What speakers to put on the rear shelf in a VAZ 2112

To modernize the acoustic system of VAZ 2114, 2107, 2110 you need to put in very little effort. You can make a shelf for speakers with greater power, diameter, weight, and cleaner sound with your own hands. This is a simple design.

Advantages:

• durable, rigid, hard surface, not flexible - if the plastic is replaced with a sheet of plywood or chipboard, the design will be significantly improved;
• static - eliminates the risk of speaker theft.

The difference will be immediately noticeable and will pleasantly surprise you. It takes little time to redo the acoustics - a few hours. The materials will be inexpensive. In addition to the fact that the acoustics should be slightly changed to increase the level of comfort, it is advisable to install soundproofing elements in the cabin.

This will have to be done a little later, as well as the creation of a convertible top for the VAZ 2114, 2107, 2112, and the installation of a stylish steering wheel. Saving money will not be superfluous; it is very good that you can make this important element with your own hands.

By the way, a new acoustic shelf for a VAZ 2114, 2115 or another model may also not completely solve the problem of poor sound. The vibration coming from the speakers during their operation will spoil everything, as well as the fragile fixation of the shelf to the base, and displacement when the car moves. Under the shelf you can place a layer of sound insulation, vibroplast.

Any motorist can handle this task - making an acoustic shelf for a VAZ 2107, 2112 or 2115. Making it yourself is no more difficult than restoring an old rocking chair, cutting a dry branch from a tree in the country, or making an indoor fountain from an aquarium pump and a bucket.

Why did it happen so?

Perhaps the automatic requests do not belong to you, but to another user accessing the network from the same IP address as you. You need to enter the characters into the form once, after which we will remember you and be able to distinguish you from other users exiting from this IP. In this case, the page with the captcha will not bother you for quite a long time.

You may have add-ons installed in your browser that can make automatic search requests. In this case, we recommend that you disable them.

It is also possible that your computer is infected with a virus program that is using it to collect information. Maybe you should check your system for viruses.

If you have any problems or would like our support team, please use the feedback form.

We recommend watching:

VAZ 2114 windshield size

How to make an acoustic shelf for a VAZ 2114 Music in a car with your own hands

Acoustic rear shelf for VAZ 2112, VAZ 2111, VAZ 2110

First of all, pay attention to the fact that the rear acoustic shelves are fundamentally different from each other. In addition, a shelf for a sedan simply cannot fit a hatchback car. That is why the procedure for designing an acoustic shelf should be approached extremely carefully.

But according to those who like to do everything with their own hands, you can make a shelf yourself, and this is where you can find similar production elements. In addition, it is also worth noting that not only the appearance of the inside of your car interior, but also the sound quality of the music will depend on the quality of its manufacturing.

Why did it happen so?

Perhaps the automatic requests do not belong to you, but to another user accessing the network from the same IP address as you. You need to enter the characters into the form once, after which we will remember you and be able to distinguish you from other users exiting from this IP. In this case, the page with the captcha will not bother you for quite a long time.

You may have add-ons installed in your browser that can make automatic search requests. In this case, we recommend that you disable them.

It is also possible that your computer is infected with a virus program that is using it to collect information. Maybe you should check your system for viruses.

If you have any problems or would like our support team, please use the feedback form.

We are finalizing the factory version

If the VAZ 2114 acoustic shelf is expensive for you, but you don’t want to make it yourself from scratch, then you can modify the factory shelf.

To do this you need the following tools and materials:

1. Plywood.
2. Putty.
3. Upholstery.
4. Self-tapping screws.
5. Epoxy adhesive.
6. Jigsaw.
7. Knife.
8. Emery (sandpaper).
9. Stapler.

The shelf is easy to modify; for a good result, the steps are performed in the following order:

1. We draw a template on cardboard, use it to draw places for the speakers on the shelf, and cut them out with a jigsaw.
2. We use the shelf as a template, draw what we need on the plywood, and cut out what we need on the plywood.
3. Using epoxy glue, we glue the shelf to a piece of plywood cut out for it.
4. We cover (glue) the finished result with carpet (another fabric), not forgetting about the plywood ends.

The benefits of an acoustic shelf

Acoustic shelf VAZ 2110

Before moving on to the immediate algorithm of actions, let's dwell on the benefits of an acoustic shelf. Let's find out what its advantages and advantages are. So, below are the known advantages of such a shelf:

2110 acoustic shelf with hidden speakers

Acoustic shelf VAZ 2110 and its manufacture

Acoustic shelf VAZ 2110

The acoustic shelf of the VAZ 2110 is made with your own hands if the standard one is not satisfactory for various reasons. Firstly, the factory shelf cannot in any way improve the quality of car audio that the owner so desires. Secondly, the factory shelf does not make it possible to install speakers with a wider diameter. On the VAZ 2110, the acoustic shelf can be made independently without any problems, although it can also be purchased at some store.

Reviews

Delivery of goods is carried out throughout Russia and the CIS:

1. Russian Post (from 350 rubles and above)

Delivery to all regions of the Russian Federation and CIS countries

2. Transport Companies (from 350 rubles and above)

Delivery throughout Russia and the Republic of Kazakhstan

• TK Energy (nrg-tk.ru)
• TC Business Lines (dellin.ru)
• TC SDEK (www.cdek.ru)
• TK PEK (pecom.ru)
• TK KIT (tk-kit.ru)

3. Pickup

The order can be picked up at the office at Tolyatti, 40 Let Pobedy 38, TD “Malachite”, 1st floor.

The waiting time for sending an order in our online store is approximately 2-7 working days, large orders 7-14 working days. days; color of bumpers, mirrors, body parts, spoilers, etc. 7-14 work. days; sewing covers, upholstery, steering wheels, gear knobs, EVA mats, etc. 7-14 work. days.

During this period, we will send you a tracking number by email. email to track the parcel en route.

Payment can be made in the following ways:

1. Payment to a Sberbank card

You can pay using the SBERBANK-Online application and other Bank applications.

After placing an order, making payment, do not indicate comments , we ourselves will understand by the amount of the order and the name of the sender. After receiving the funds, the status of your order will be changed to paid until 17.00 of the current day, or from 9.00 of the next Moscow time.

2. By bank card

Automatic acceptance of payments using MIR Bank cards, VISA International, Mastercard.

You can also pay with credit cards with a grace period.

To select payment for goods using a bank card, on the corresponding page you must click the “Pay for order by bank card” button.

2. Payment to QIWI wallet 89272115207

3. Payment on Yandex.Money 410013993950891

5. Payment to a bank account for legal entities and individual entrepreneurs (commission 6%)

Send your organization's details to [email protected] for invoicing. After paying the bill, be sure to send a payment order.

You can make payment in one of the ways convenient for you:

1. To a SberBank or Alfa-Bank card. The most profitable method for the buyer, as well as the most convenient one, is to use the Sberbank Online service, Alfa-Click, an ATM, or through an operator at the bank. After placing your order, the manager will send you the card details. If you do not have a SberBank or Alfa-Bank card, you can also top up your card using the details at any SberBank or Alfa-Bank branch. Payment is credited within an hour.
2. Yandex money. Customers who have Yandex.Wallet can quickly and easily pay for an order in our online store, the commission will be 0%.
3. Yandex.Checkout is an online payment acceptance service. A convenient option with a large selection of payment methods for your order: plastic cards of any banks, including credit cards, in cash through terminals, ATMs or phone shops, Qiwi Wallet, Yandex.Money, WebMoney, from your phone balance, purchase on credit (payment in installments) . Please carefully check which email address you provided during the ordering process, as you will receive a receipt for payment for your order. Yandex.Checkout commission for transfer will range from 3% to 6% .
4. QIWI wallet. If it is more convenient for the client to use a QIWI wallet or, if it is not available, to pay through the nearest QIWI terminal, the manager will provide you with the wallet number. Commission 0%.
5. Payment at any bank using an invoice or receipt (+3% to the cost). If you do not use electronic wallets and plastic cards, we provide the opportunity to make payments at any bank in Russia. The site manager will send you a pre-filled receipt “Form No. PD-4” by e-mail; please carefully check the e-mail address you provide. The bank commission will be approximately 3% and depends on the bank itself
6. Cash on delivery upon delivery by the Transport Company (payment for purchase upon receipt of the order).
7. Cash on delivery upon delivery by Russian Post (payment for purchase upon receipt of the order). The order arrives at the post office, after which you pay its cost and pick it up, in which case the Russian Post charges a commission.

We make it from scratch

The acoustic shelf of the VAZ 2114 is easy to make with your own hands, you will have to spend a little on materials, and do not regret a little of your time.

The following “ingredients” will be useful:

1. Centimeter chipboard or MDF.
2. Carpet (other fabric).
3. Glue.
4. Self-tapping screws.
5. Jigsaw.
6. Drill.
7. Grinding machine (emery, sandpaper).
8. Stapler.
9. Materials for the layout: cardboard, pencils, drawing supplies.

We will do it like this:

1. We are preparing a template, then we will try it on the car, it should be a little larger.
2. We cut out the shelf according to the template, remove the irregularities by grinding down the gap included in the template.
3. We double-check its dimensions on the car, if everything matches the car and the size of the intended speakers, then the shelf is ready.
4. We are preparing materials for covering (pasting), everything should be at hand.
5. Apply glue to the plywood, apply fabric, and roll everything out to avoid bubbles.
6. We fix the edges with a stapler.
7. Let it dry for a day.

In order for the shelf to be foldable, you need to take care of the moving elements in advance and try on the hinges. It is better to do this before pasting with carpet, so the design will look much more aesthetically pleasing; the moving technical gap can be closed with a strip of “elastic” (elastic fabric), but not with carpet or other non-stretchy fabric.

Very often, people don’t want to fool themselves with jigsaws and glue, so they immediately buy ready-made ones. This solution has a significant advantage, because there are a great many modifications of shelves, both a regular “plastic shelf” and a solid “VAS 2114 acoustic shelf with sidewalls” are sold, all intermediate options are also present in the online assortment. Although the purchased version will be many times more expensive than the homemade one, laziness and the “pursuit of beauty” sometimes overpower common sense and the desire to save.

Product delivery options

Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the shipping method. Detailed information can be found on the “Delivery and Payment” page.

Parcel by Russian Post

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 5 to 12 days.

Parcel by Russian Post 1st class

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 2 to 5 days. More expensive than regular delivery by Russian Post, approximately 50%. Parcel weight up to 2.5 kg

Express Parcel EMS

Available payment methods:

• Cash on delivery (payment upon receipt)
• Using cards Sberbank, VTB, Post Bank, Tinkoff
• Yandex money
• QIWI
• ROBOKASSA

Shipping throughout Russia. Delivery time is from 3 to 7 days. More expensive than regular delivery by Russian Post, approximately 100%.

Making your own shelves for acoustics

To make the rear shelf you will need.

1. A sheet of plywood 10 mm thick (MDF or chipboard).
2. Carpet (non-woven, highly stretchable material). 0.5 m with dimensions 150x80 cm is enough.
3. Glue for plywood and carpet (special for this fabric or universal glue 88).
4. Self-tapping screws up to 25 mm long.
5. Drill.
6. Jigsaw.
7. Cardboard for making a template and drawing tools (compasses, pencils, rulers).
8. Sanding machine or sandpaper.
9. Construction or furniture stapler, staples for it.

The template is applied to a sheet of cardboard and then tried on in the machine. A piece of 133x57.5 cm is cut out (with a margin for adjustment). We transfer the drawing to plywood. After cutting down the two outer pieces, we carry out another fitting. Next, we make another template from plywood to accurately determine all the angles. They may interfere with closing the trunk. Let's see if the shelf interferes with locking the luggage compartment.

We measure the radius of the speakers and transfer the resulting dimensions to the layout. Let's start cutting out the shelf, cover and holes for the speakers with an electric jigsaw. The edges of the slots must be carefully sanded. Where the trunk lid opens, sanding is done on both sides. Then we measure the carpet along the entire length of the folding part with a margin of about 5-6 cm.

Apply glue to the bottom part, attach the carpet, and so on along all edges. It is better to apply the glue in parts so that other areas do not dry out. There is no need to apply a thick layer, as the fabric may become saturated. We secure the edges with a construction stapler, placing the staples as close to each other as possible. The carpet is elastic, but you don’t need to stretch it much. After finishing with carpet, the acoustic shelf should dry within 24 hours.

The next stage is fastening the hinges for the moving part. Self-tapping screws should not interfere with the operation of the hinges. We try on the speakers and cover the remaining part of the acoustic shelf with carpet. We install the hinges, try on the shelf and install the speakers. The considered option does not require dismantling the standard sidewalls; the acoustic shelf is installed on them using self-tapping screws.

A home-made acoustic shelf for a VAZ will cost 1.5 times less than a purchased one and can be compared with the factory version in terms of quality.

Making an acoustic shelf for a VAZ 2114 with your own hands

Having a hatchback body, the VAZ 2114 is distinguished by an impressive trunk, which covers the entire rear part of the car. It is separated from the interior by a seat and a removable shelf.

The shelf has bending points provided by the design, along which it folds, increasing the volume of the luggage compartment. This design does not cause any complaints, especially if the presence of music is not important, but if music means a lot to the owner, a “surprise” awaits him - there are no places for mounting an audio system in the design of the VAZ 2114.

The standard shelf is thin and light, any speaker will make it heavier, which will lead to its incorrect fixation, the shelf will rattle a lot, the audio system will resonate with the pits and the rumble from behind will be simply unbearable, the presence of such “music” is very doubtful pleasure. Later, the sides will also become loose, and then it will become completely unbearable.

The problem is solved in three ways:

1. The shelf is removed, there are no rear speakers, there is nothing to rattle, but there is no music either.
2. Acoustic shelf VAZ 2114 is inexpensive to buy, but it will improve the situation significantly.
3. Make an acoustic shelf yourself.

In addition to eliminating third-party noise, the acoustic shelf will solve the problem of trunk structural rigidity, provide the acoustic system with a reliable frame, and eliminate the negative impact of acoustic vibrations on the mechanical joints of the rear door and trunk as a whole.

Construction of seat belt boxes and speaker podiums

Using a jigsaw we make the bases for the podiums. In order for the structure to be rigid, it must be reinforced with 40x20 mm wooden blocks; using self-tapping screws and bars we connect the ovals together (as shown in the figure below). We cut out several holes in the shelf for air circulation between the trunk and the passenger compartment.

We fill the voids between the bars of the podiums with polyurethane foam. After the foam has dried, we simply cut it along the edges and sand it with sandpaper to smooth out the unevenness. We strengthen the structure with cardboard, which is impregnated with epoxy glue.

When making boxes for seat belts, it should be taken into account that the belts enter from the side. The boxes are made of timber, which adds rigidity to the structure. After installing the boxes, the rear shelf of the VAZ 2107 is no different from the factory one. To give it an aesthetic appearance, you need to cover it with carpet, the entire shelf is ready, you can install it.

Note: you can make a bass reflex for an acoustic shelf. To do this, make a hole in the middle of the shelf, so as not to spoil the view, it can be covered with a decorative lattice.

Lada 2112 NOT BAD › Logbook › Acoustic shelf with sides

Good day to all!
In general, I was fed up with knocks, creaks, and rattling sounds from the trunk. Without hesitation, I decided to buy an acoustic shelf. I thought about making it myself, of course, but I figured that it would be more expensive in terms of money and time, so I decided to order a ready-made one (in the process I realized that I could do it myself).

Well, in general, I called, ordered, took it home yesterday, and let’s install it. Well, I thought, I took it off and installed it, especially since the seller said, everything is even, the sizes match, N I F I G I’ll tell you!

I disassembled and removed the old sidewalls, unscrewed 300 screws and the same number of bolts, and with the help of some mother pulled them out

I decided to try on one side panel

It seems normal, well, of course, all the holes had to be drilled on site. I had to run to a construction store and buy a bunch of different screws and corners. In general, in order for the shelf to stay more securely on the sides, they need to be well secured, having fixed the corner, I realized that somehow everything was sitting snotty, I decided to swap the seat belt fasteners (which are not there)

Unscrewed it and swapped it from right to left. I screwed the sidewall to them, everything seems to fit well, it doesn’t shake or make up, in general everything is fine.

Next, 1 strip was cut and screwed onto the sidewalls in order to secure the skin to them

It seems that everything is done, I installed the sidewalls, well, I think I’ll throw in the middle and get hurt, but damn, it won’t stand up, it’s long! Well, my first phrase is NATURAL!

In short, I measured the widths in the cabin from glass to glass and measured the entire new shelf, in short, everything was made to size but 3 cm longer, in general with a margin!