All colors of Lada Priora: The colors that Priora was painted in

Lada Priora sedan swallow color quartz

#1 Baldesarini

Users
Posts: 23

This is my 3rd car.
Came to me in good condition but with a dead engine. Oil consumption was proportional to gasoline consumption (4 liters of oil per 30 liters of gasoline). This was the first time I encountered such a case. I always thought that in this condition the engine could not work in principle. However, it fryed the current on the way, so I did not immediately notice this problem after purchase. So, when I returned from work and saw the oil can light up on the dashboard, I was very surprised. I gave my swallow to a mechanic I know to revive. At first I just wanted to install VAZ 10th pistons and be done with it. But the mechanic offered me another option; I didn’t go into too much detail about the repair; I left my basin in his garage for a week.

Now I have it running in with the engine, instead of the factory 1.6 it got a modified 1.8.

In addition to the engine, while the car was in my possession, it received: Rubber breeches, albeit with stampings (I think that on our roads stamping is the best thing; repairs are done with a hammer);

Rear tinted headlights and LEDs in them, as well as LED license plate illumination;

Luxury door handles, chrome grille and grille on the bumper, as well as white Philips lamps in the headlights;

A stretcher on the steering rack (as you all know, if you turn the steering wheel on a Priora in place, the distance from the hood to the fender changes, which you can feel by placing your finger on the above-mentioned area). The wings stopped moving apart) And also a stretcher on the body (just for fun in corners)

Negative rear camber -1

Blue dashboard lights, Alpine DVA-9861 dash, front podiums and 16th columns are the same ALPINE, as well as a rear wooden shelf and HERZ pancakes.

On the outside: Replacement of rear lights, painted headlights along with replacement of grille, handles, black repeaters

According to the database

— Engine 1.8 (105 hp) — The car was produced in 2008, was purchased in 2011 — Lada Priora sedan has been produced since 2007

A lot has already been done, but many plans have not yet been realized, so the most interesting things are yet to come

#2 Dyshik

Blocked
Messages: 8,448

#3 Baldesarini

Users
Posts: 23

Source: autoportal.ru

Removable and regular tinting on Priora: pros and cons

The main options for tinting Priora windows are removable and non-removable film. Removable material is considered quite practical due to the following advantages:

can be installed several times;
If a traffic police officer stops you and then forces you to remove the film under the threat of an administrative fine, you can remove it without regret. After this conversation it will be possible to stick it back;
the degree of darkness is not inferior to conventional film;
quick installation.

Need some advice. Which color of priors is better?

Orenburg region Bugurusl

Lada Priora hatchback

September 7, 2013, 11:03 #1

I want to buy a Priora 2008 or 2009, what are the problems with the paintwork? Which prior color is better: black or quartz or dark shades of colors? I don't want white or metallic. I like dark colors because they are more difficult to wash yourself, I am aware of that, but are there any other disadvantages during use?

Lada Vesta Sedan

7 September 2013, 14:36 #2 + 1

Nazar, September 7, 2013, 11:03, #1

I want to buy a Priora 2008 or 2009, what are the problems with the paintwork? I like dark colors because they are more difficult to wash yourself, I am aware of that, but are there any other disadvantages during use?

Black is very difficult to wash, but it is beautiful + chips are not noticeable.

Dirt is not visible on quartz

7 September 2013, 14:46 #3 + 1

Alexander05, September 7, 2013, 14:36, #2

Black is very difficult to wash, but it is beautiful + chips are not noticeable.

Dirt is not visible on quartz

You got excited about Sanya's chips. You can see the primer on the chip; it is white, a white spot on black. I colored it in with a black marker.

Washing black is not difficult, you have to wash it more often. Color is not for lazy people.

Besides white, all other colors are like metallics.

Lada Vesta Sedan

September 7, 2013, 14:49 #4 + 1

faruk, 7 September 2013, 14:46, #3

You got excited about Sanya's chips. You can see the primer on the chip; it is white, a white spot on black. I colored it in with a black marker.

Washing black is not difficult, you have to wash it more often. Color is not for lazy people.

Besides white, all other colors are like metallics.

Bumpers are black under paint

September 7, 2013, 11:39 pm #5

I had Quartz. VASHAPE is the best color, in my opinion. Viburnum is white, it looks good when clean, and it’s easier to wash, there are no streaks, but quartz is more beautiful

There are two significant disadvantages:

Problems with traffic police inspectors who will measure light transmittance, even if the tinting is normal and the driver has nothing to fear - constant attention on their part is tiring.
It is quite difficult to navigate in the dark, especially when reversing.

But for many owners, tinted windows have become a permanent attribute of their favorite car, which is updated time after time after its service life has expired, because without tinted windows it becomes completely uncomfortable. However, you should approach the issue carefully so as not to experience frequent problems with traffic police inspectors.

Lada Priora sedan swallow color quartz

#1 Baldesarini

Users

Posts: 23

I gave my swallow to a mechanic I know to revive. At first I just wanted to install VAZ 10th pistons and be done with it. But the mechanic offered me another option; I didn’t go into too much detail about the repair; I left my basin in his garage for a week.

Now I have it running in with the engine, instead of the factory 1.6 it got a modified 1.8.

Rear tinted headlights and LEDs in them, as well as LED license plate illumination;

Luxury door handles, chrome grille and grille on the bumper, as well as white Philips lamps in the headlights;

Negative rear camber -1

Blue dashboard lights, Alpine DVA-9861 dash, front podiums and 16th columns are the same ALPINE, as well as a rear wooden shelf and HERZ pancakes.

On the outside: Replacement of rear lights, painted headlights along with replacement of grille, handles, black repeaters

According to the database

— Engine 1.8 (105 hp) — The car was produced in 2008, was purchased in 2011 — Lada Priora sedan has been produced since 2007

How can you tint a car according to GOST

GOST precisely defines the maximum coefficient of light transmittance of a car, with which it will be possible to pass a technical inspection, as well as drive the car itself. The standard clearly divides all car windows into two types:

The first type is the front ones, through which the driver receives the main view.
The second type is the rear ones, which make the rear view accessible to the driver.

The restrictions on the percentage of tinting are as follows:

wind - up to 25% (more than 75% light transmission);
the tinting strip on the windshield can be of any degree of light transmission, but strictly up to 14 cm thick;
driver and passenger front windows – up to 30%;
rear windows - there are no restrictions, the darkening can be any, even continuous.

Lada Priora color quartz

Catalog number: 2170-8402010-630

Standard price:

11400.00 rub. Your price

Price For registered:

10925.00 rub.

Before visiting the store, check product availability!

The Lada Priora hood is installed on cars of the entire family (VAZ 2170 sedan, VAZ 2171 station wagon, VAZ 2172 hatchback). It is attached to the body from the back with hinges, the outer part is secured with a lock. The removable design of the hood allows you to replace it immediately in the color of the car body.

The Priora's hood is painted using imported modern equipment. The paints used are factory paints, in this version quartz 630, used for conveyor painting at AvtoVAZ. All painted parts are individually packaged for shipping in four layers.

All stages of preparation

It is clear that it is best to clean the disc “to the metal” before painting. In this case, only sandpaper (ISO P400-P1500) and, perhaps, a drill with a metal brush are used.

How to tint a car: materials and tools

Based on your experience of how terrible the scratches on car windows look, you'll have to spend a little time finding the tools for the job. Before tinting a Lada Priora car, collect the following tools:

spatula (it is better to find a soft or hard rubber one. A plastic one will leave “knots” on the film itself, and can also reach the glass, where it will leave white scratches);
shampoo (you can use any shampoo, but ordinary clean water will be enough to install the removable film);
knife (useful for cutting off excess part of the roll);
blade;
ruler (longer than the length of the glass surface that you are going to cover with tint);
two rags.

Before gluing the film, you should remove the velvet covers; for ease of work, you can disassemble the door card - this must be done to drive the tint deeper. If it almost “sticks out”, its edges will be touched by moving parts, and then it will gradually begin to peel off. The procedure for tinting a Lada Priora is as follows:

Wash the glass thoroughly to remove grease and dust.
Wipe it off with a clean, dry cloth without pressing it with your hand, and then carefully run the blade around, brushing away any remaining drips.
Gradually remove the protective films and spray them with water to keep the coating moist.
Carefully check that the correct side is facing the glass surface. Once you have covered the entire area, take a spatula. “Drive out” the water with progressive movements from the center. Wipe the film with a rag.
Use a knife to cut off most of the remaining roll. Leave the tinted glass for several hours, and only after that finally adjust the length of the coating by cutting off the excess with a knife.

Types of film

A modern car can be decorated using the following types of tint films:

Colored. Can almost completely match the body color. It is glued in layers: the more there are, the less light transmission.
Metallized. It is similar to a gradient, and the metal layer can be on the outside or inside. Such a surface easily reflects the sun's rays, but can reduce the quality of mobile communications because it interferes with the free transmission of radio signals.
Infiniti. The outer part is coated with a layer of metal and also gets the best reviews. Does not reflect light well. The “picture” from the interior turns out to be quite pleasant and clear.
Combined. This is a colored film coated with a layer of metal. The gradient with the transition from one color to another is more pronounced, and the film itself is quite practical. The dark part does not allow light to pass through, and the light part creates an overview.
Spatternaya. This type is subject to little wear and tear, which is why marketers often describe it as “durable.” The cost of the material is high, but it looks very decent.
Spatter-metallized. Another “hybrid” that gives a premium touch.
Athermal blocks up to 90% of ultraviolet and infrared rays. This is achieved due to the peculiarity of the material - its outer layer is covered with nanoceramics.
The “Chameleon” glass tinting for a Priora car has a purple tint, which will be combined with other colors when the temperature changes.
Anti-vandal. They will hold the glass in place if it breaks.
Carbon. Provides both strength and tinting of glass.