Do it yourself Priora hatchback acoustic shelf

I IMMEDIATELY WANT TO EXPRESS HUGE THANK YOU to Gogik173, WITHOUT HIM THIS WOULD NOT BE REALISTIC)

Well, it's time to tell everything in order.

Three days ago I decided to make an acoustic shelf for a Prioric Hatch. One large chipboard and one large sheet of plywood for the shelf itself, as well as several smaller boards for the sides.

Started work. I removed the shelf and the side panels (the latter are held on by 4 screws - 2 on the trunk lid side, 1 in the center of the side panel and 1 on the seat side).

I drew out the left side panel, started cutting it out, took a long time and painfully to adjust everything to size, but... I’ve never seen wooden shelves before, obviously nothing worked out for me, I couldn’t figure out how to put it in its regular place.

As a result, the day went down the drain.

The next day I went to a friend to get patterns for the sides and shelves. He offered to help with the production, I couldn’t refuse, because... I was sure that I couldn’t cope on my own.

I went to the store and bought everything I needed, namely, several packages of self-tapping screws of different lengths with wide heads, a piano hinge, carpet - 1.5 m, mounting glue for wood, metal hangers (using them in the future we will secure parts of the side panels between each other and install them in their normal place.)

Then the procedure began for drawing the sides according to the pattern and then sawing them out.

After all the parts of the side panels were cut out, they were fastened with self-tapping screws, and the “hump” was screwed to the main part of the side panel using metal hangers.

We tried on the first side panel - it fit like a original, there were small gaps in some places - just under the carpet)

Then they cut out the second one and repeated the steps.

The next day we tried to fit the speakers into the side panels, as usual - from above, it turned out that we were a little wrong with the size of the holes for the speakers, but it was not scary, we just covered the holes with a secret mesh)) and covered them with carpet on top, and seated the column from below. How they covered it with carpet - glue was purchased for installation, and a construction stapler was also borrowed. The upper part of the side panel was coated with glue and a carpet was applied, then with a little effort the edges were tightened and stapled from below.

And voila - we got amazing sidewalls, just like straight from the factory)

Purpose of the acoustic shelf

This part serves to secure the sound speakers of the music system. It is carried out in such a form that the size and shape ensure the greatest purity and volume of the sound of the installed speakers.

Materials for making an acoustic shelf

In the practice of manufacturing this part, only two types of materials are usually used:

Wood, usually plywood.
Plastic base.

Each of them has its own advantages. Thus, the wood is softer and is better for applying decorative coatings. After all, they try to cover the shelf with beautiful fabric to match the color of the upholstery. And, of course, attaching fabric to plywood is much easier than to plastic, without gluing. However, the plastic is not damaged by moisture and does not delaminate like plywood. So you need to choose the material for the acoustic shelf wisely. And take into account all the conditions in which the Priora is operated.

What shape are Priora acoustic shelves made of?

These parts are made according to the shape of the space between the rear seat and the body under the glass. The best option is to take measurements from the standard shelf, and having made the appropriate layout, use it to make your own version, with recesses for the available speakers.

Advantages and disadvantages of homemade products

A DIY shelf has a lot of positive aspects:

precise adjustment to the dimensions of the luggage compartment;
the ability to use any acoustics connection scheme;
you can use any material for manufacturing and upholstery - in order to increase durability, it is better to choose natural wood treated with moisture-proof compounds;
Compared to a standard acoustic shelf, a homemade one does not rattle or vibrate;
you can create a product according to your own drawings and increase the amount of usable trunk space.

Among the disadvantages, they note only the need to spend free time, especially if you have to develop everything yourself. You also need to have skills in handling various power tools, for example, a jigsaw.

Refinement of the factory version of the acoustic shelf

Of course, it is not always possible to invest, or simply not everyone has the ability to work with wood. But don't be upset. After all, it is quite possible to carry out minor modifications to a part installed at the factory. And although this is not the option of installing a shelf yourself, however, such a modification will significantly improve the sound. And you just need to treat the seats with regular foam and put a layer on the entire lower part of the part. This will allow you to secure the soundbar tightly enough and almost completely avoid vibration. This is, so to speak, a budget option.

For hatchback and station wagon

There is no particular difference between them in the manufacturing process. You just need to remember that on a station wagon body, the shelf rises when the rear door is opened, and therefore a more careful adjustment is needed. Well, it is advisable to make it heavier, for a confident landing in place.

Useful video on the topic of the Priora acoustic shelf:

Owners of domestic cars are trying to improve existing models. The most common type of tuning is the installation of a modern speaker system. For these purposes, the rear acoustic shelf of the Priora Hatchback is installed. You can either purchase such a shelf at a car dealership or make it yourself.

Buy or make it yourself?

The installation of acoustics affects the entire interior of the car. Thus, it can be supplemented with decorative elements or changed completely. Installing speaker systems yourself allows you to:

Take into account the dimensions of the trunk and column (the holes for the columns must correspond to their diameter).
Select the speaker connection scheme and the ability to change playback modes.
Select upholstery, decorative elements, color and texture (natural and artificial leather are ideal for upholstery).
Possibility to save internal space (the size of the structure may be non-standard).
Choose the main material, it is better if it is wood (chipboard, MDF, plywood).

What happens in the end?

The rear shelf on the Priora, created with your own hands, will not be inferior in quality or appearance to standard models, which are sold in a wide range in any online store. In addition, creating a shelf for your own design from professionals or ordering it from an online store will cost you much more than you will assemble the option you like in your garage. The most important thing is that before starting work, be sure to read the photographs of the manufacture and installation of the shelf on the Priora.

I IMMEDIATELY WANT TO EXPRESS HUGE THANK YOU to Gogik173, WITHOUT HIM THIS WOULD NOT BE REALISTIC)

Well, it's time to tell everything in order.

Three days ago I decided to make an acoustic shelf for a Prioric Hatch. One large chipboard and one large sheet of plywood for the shelf itself, as well as several smaller boards for the sides.

Started work. I removed the shelf and the side panels (the latter are held on by 4 screws - 2 on the trunk lid side, 1 in the center of the side panel and 1 on the seat side).

As a result, the day went down the drain.

The next day I went to a friend to get patterns for the sides and shelves. He offered to help with the production, I couldn’t refuse, because... I was sure that I couldn’t cope on my own.

Then the procedure began for drawing the sides according to the pattern and then sawing them out.

After all the parts of the side panels were cut out, they were fastened with self-tapping screws, and the “hump” was screwed to the main part of the side panel using metal hangers.

We tried on the first side panel - it fit like a original, there were small gaps in some places - just under the carpet)

Then they cut out the second one and repeated the steps.

And voila - we got amazing sidewalls, just like straight from the factory)

Then, using the same metal hangers, we secured them into the standard holes. To be honest, I was initially skeptical about these hangers - how would such little things hold heavy wafers made of chipboard and plywood. But my fears were in vain, the sides were firmly attached)

Then the shelf itself.

Since the sides were made according to the stock dimensions, they decided to make the shelf accordingly, i.e. We measured the dimensions using the stock shelf.

Measured and cut. At first we were a little wrong with the width, but thank God we didn’t cut it enough) we trimmed it a little more on the sides - the result is that it fits like a native.

Installed in the intended place. At this point, at 8 pm, the two-day work was completed.

According to rough estimates, carpet, glue, hinge, screws, hangers cost about 500-600 rubles.

Manufacturing process

You may be interested in: Michelin Latitude Sport tires: characteristics, description
Such car accessories should be made very carefully. Working out the smallest details. The Priora Hatchback acoustic shelf is made exclusively from a pre-made stencil. Creation sequence:

Making a model - cardboard or thin plywood is suitable for this, take the factory rear shelf as a sample, apply the design to the base, and then cut it out (the holes for the acoustics should also be marked and cut out).

We apply the sketch to the base and cut it out with a jigsaw.

For strong fastening, we attach bars to the sides.

Installation in the trunk is carried out using self-tapping screws on the sides of the luggage compartment.

We treat the edges and joints with sealant.

Remaking a standard acoustic shelf

The Priora Hatchback acoustic shelf is perfect for modification, and it is several times cheaper than creating a new one. This will only require additional strengthening of the base of the standard spare part. To do this, you can use polyurethane foam in a can. Remodeling stages:

Seal the edges and holes to prevent foam from entering with tape.

Moisten the back end wall with water.

Spray the mixture evenly over the entire surface.

Wait 40 minutes until it dries, and then press it evenly against the body (to prevent air from accumulating under the foam, you can pierce it in advance and then compact it by pressing).

Treat the edges and sides with a special rubber-based sealant.

The foam dries completely after 24 hours.

To avoid creaking and rattling during movement and playing music, the frame should be covered with insulating material.

The Priora Hatchback acoustic shelf is mounted in its place in the trunk.

Also, a standard acoustic shelf can be decorated and supplemented with various decor, allowing for changing the upholstery or installing additional accessories.

Features of creating shelves

Acoustic shelf in Priora sedan

You can create an acoustic shelf for a Priora at home in different ways. In general, there are several main methods used during such a process. Fans of loud music can even create an acoustic stage in their car. Most often, inexpensive materials (chipboard, plywood or MDF) are used to make shelves. Subsequently, it is covered with carpet. Working with such materials is not difficult, especially since the end result will please many. However, some choose expensive options to realize this goal - natural wood, leather, and the like.

Acoustic shelf for Priora sedan

Note: To avoid problems with rattling and vibration after fixing the shelf, it should be installed in hard places using high-quality fasteners.

Result

As a result of independent production, you get exactly the same or a completely original rear acoustic shelf of the Priora Hatchback, not much different from the assortment in the store. In addition, making it yourself will, oddly enough, be faster and cheaper. You don’t have to wait for your order to be delivered, and the upholstery fabric can be selected at the right price and quality.

The main thing in this process is to study the specifics of the acoustic system, calculate the dimensions of the future shelf and then boldly take up the instrument.

It will be difficult for a non-professional to decide how to choose the size and material to obtain the most comfortable sound production. But if you want, it’s quite possible to find diagrams and instructions for any type of acoustics and car.