How to disable the turbo timer on the Starline a91 alarm system?

Turbo timer is a function of some StarLine alarm models to activate and automatically keep the engine running for the time required by the car owner. The turbine, which sometimes heats up to 850°C for a diesel engine and up to 1000 degrees in gasoline cars, cools down during this time. The driver does not need to waste time waiting: the alarm will automatically turn off the engine and arm the car after turning off the ignition. But this option is not always relevant and you need to know how to disable the turbo timer on the Starline A91 and other models.

How to turn on the turbo timer on the Starline a61 alarm system?

Starline

A61 In cars with
a Starline
A61
the turbo timer
is turned on as follows: The parking brake in the car is raised. The diode indicator should work, and the engine operating time after shutdown will appear on the remote control screen.

Interesting materials:

How to recover your YouTube account? How to recover your Viber account? How to recover your Gmail password? How to recover your old Facebook account? How to restore your Telegram channel? How to restore your tabs? How to restore your old classmates page? How to restore your Facebook page? How to recover a text document? How to restore TikTok?

Possible problems in the operation of the turbo timer and their elimination

The most common problems due to which the option does not work:

• incorrect connection to the engine starting circuit;
• incorrect settings;
• the handbrake is not engaged;
• the selector is not in parking mode;
• On the key fob, the turbo mode is inactive.

If the turbo timer stops working, then you need to figure it out in a simple way:

1. Check the parking brake.
2. Check that the turbo timer mode is active.
3. Check the settings of the function and other options that indirectly affect it. For example, car engine support mode.
4. Check the connection diagram: integrity of wires, contacts, cables.

Enabling start based on engine temperature

More relevant during cold weather is automatic start based on engine temperature. Unlike the previous method, the engine will not start if it is warm and there is no need to warm it up. This option is programmed as follows:

• turn off the ignition, press the Valet key six times;
• turn on the ignition, listen to six beeps, click Valet four more times;
• Now the first button on the remote control will set the parameter -5 degrees, the second - minus 10, the third - minus 18. A long and then short press of the first button is responsible for setting the parameter - 25 degrees Celsius.

Download installation instructions for Starline alarm systems for different models in PDF format

You can download service manuals for setting up and managing StarLine car alarms using the following links:

Feasibility of installation

It is most advisable to install a turbo timer in the following cases:

• A turbocharged diesel engine is installed in an all-terrain vehicle, primarily used in off-road applications. The operating mode is predominantly harsh. Often you have to drive with the maximum permissible load and with no cooling by the oncoming air flow;
• The decision to install a turbine on an atmospheric engine was made independently.

Installing a turbo timer seems less relevant in the following cases:

• Gasoline or diesel engines are used in a gentle mode. Movement occurs mainly around the city. The driving style is far from dynamic. Before stopping, the speed rarely exceeds 2000. The power plant uses high-quality oil;
• The car already has a car alarm with a turbo timer, for example, Starline. Installing an additional device will be unnecessary;
• The car is under warranty and installing additional equipment will lead to its loss. In this case, you need to get advice from a car dealership about the possibility of installing the device.

Whether to install a turbo timer or not is a personal matter for the owner. Much depends not only on the mode of operation of the iron horse, but also on the workload of the car enthusiast. It should be taken into account that even after installation, it is possible to disable the turbo timer, allowing you to use the machine in the previous mode.

Types of timers.

Turbo timers are available in two main versions:

• individual devices;
• hardware and software blocks in car security alarm systems.

The advantages of the former are ease of implementation and hidden installation. In addition, most of them allow installation by the car owner on his own (a minimum of complex switching in the electrical wiring is required). The affordable price of the devices is also important - the average price tag is in the range of 700-1500 rubles (without installation).

The main advantage of a car alarm with a turbo timer is the complete integration of solutions that allows you to ensure the safety of the turbine, while guaranteeing comprehensive protection of the car from the actions of intruders.

Naturally, the complexity of the equipment increases, as do the requirements for personnel qualifications during installation. The cost differs to a greater extent - for example, according to information provided on the website of the specialized company Signalochka.ru, a fully functional alarm system will cost the car owner from 3.5 to 42 thousand rubles. (the average price of quality products from well-known manufacturers is in the range of 8-11 thousand rubles).

When choosing a device, the buyer should pay attention to the functionality:

• In the simplest versions, the ignition switch-off delay function and communication with the alarm system are implemented. Often the user is not given the opportunity to configure intervals - the pause is hard-coded in the device firmware.
• More advanced solutions allow you to control the state of the ignition key in the lock, the position of the parking brake lever (or the inclusion of parking mode in automatic transmissions), opening/closing of doors, and the trunk lid (based on the state of the limit switches). Most provide the ability to adjust timer intervals within the limits set by the manufacturer, several control options - from the key fob, turning off the ignition and/or the position of the parking brake lever.
• Turbo timers in car alarms offer the widest possible functionality. Additional modes are often implemented - for example, warming up the engine without a driver in the cabin during the cold season or supporting the CAN bus.

Manufacturers.

When purchasing, since we are talking about car safety, the manufacturer’s reputation requires attention. Among the most famous and best-recommended companies and brands:

• StarLine (Starline);
• Pandora (Pandora);
• Sher-Khan (Sherkhan);
• Magicar;
• Sheriff.

In addition to company guarantees, high-quality assembly, well-developed circuits, the buyer in this case receives:

• Main unit(s) of the device;
• Display for setting parameters and display;
• Cables, contact blocks, fastening kit;
• Technical documentation.

Reviews from car owners.

Mikhail, Daihatsu Terios Kid:

I was interested in the question of turbo timers - based on the weight of the car and power, I estimated that for every ton of all-wheel drive there is about 60 hp. As a result, the turbine must work hard, and the design does not provide for a turbo timer. One acquaintance, an automotive engineer, answered competently. He showed me photographs where turbine temperature measurements were recorded. The maximum occurs in only 10-15% of movement, mainly in heavy SUVs with engines such as EcoBoost. In other cases (unless, of course, you accelerated to about two hundred, then stopped, slammed the doors and ran), the materials feel quite comfortable. So, in his opinion, this is an opportunity for electronics manufacturers to make extra money.

Kirill, VW Touareg TDI2.5:

I decided to install a turbo timer - my friends advised me. Everyone who drives a car with a turbocharged engine has no more problems with “spitting” after stopping for a couple of minutes at idle. I made a huge mistake - I bought the device without consulting the service. The officials immediately refused - it turns out that almost all models have compatibility problems with the standard immobilizer. And since the car is under warranty, we had to refuse. They advised me to find out whether it was possible to completely replace the security system at the service center by installing an alarm with a turbo timer. I’ll go and consult, especially since the service people themselves say that the thing is very useful.

I spoke with the director of the service center where the maintenance took place regarding the turbo timer. He says you shouldn’t think about installing it. From experience, the turbine heats up to take care of cooling after 200 kilometers with the pedal to the floor. In other cases, 25-30 seconds are enough (just time to get ready - pick up the cigarettes, put the phone in your pocket) after stopping at idle - the speed decreases, it cools down to acceptable temperatures. It’s not for nothing that practical Germans don’t install them from the factory. Trying to attach a “stray” is a headache with signal buses, levels, and compatibility with the software of standard equipment. In a word - extra money down the drain.

When installing a Starline alarm on a car equipped with a supercharged engine, the owner needs to know what a turbo timer is. The design of the device allows you to adjust the engine operating time without using a key. The driver of the car can forcibly turn off the turbo timer on the Starline A93, since some power plants have electric pumps that maintain coolant circulation after the engine is stopped.

Device selection

Before starting installation, you need to decide on the manufacturer of the turbo timer. The following performed best on the market:

The equipment is also important. For example, by purchasing an alarm system with a Starline or Magicar turbo timer, a car owner can expect to receive:

• Control block;
• a display that displays the time before the engine turns off and helps to configure the turbo timer;

Most turbo timers are installed under the dashboard. This is done not only for aesthetic purposes, but also to hide the device from prying eyes, since it has an alarm function. If there is a pre-installed security system, this criterion is not so relevant.

Starline A93 service mode - what is it

The A93 security complex has a lot of functions that not only resist theft, but also make life much easier for the owner. This is an option for a turbo timer, remote engine start depending on temperature or time, as well as additional security modes such as “Panic” or “Anti-robbery”. If the system needs to be checked at a specialized center to troubleshoot problems, the Starline A93 service mode will be required.

This article will tell you in detail what this option is, how to enter or exit it, and also whether there is a way out of the situation when this function fails or does not turn on.

Setting up the Starline A93 key fob after removing the battery

Sometimes the alarm starts to malfunction. If the reason is a deep discharge of the battery, then the battery should be replaced. However, there may be cases when the Starline car alarm will not work correctly even after installing a new part. Then you should reset to factory settings:

• turn off the ignition;
• press the settings button 9 times;
• turn on the ignition, nine siren signals will indicate the success of the procedure;
• Let's see a second reset for the second table, now you need to press the settings key ten times;
• after finishing, click on the service button and listen to one siren signal;
• press K1 of the key fob, the machine will make a sound, indicating a return to standard settings;
• turn off the ignition, the car will blink three times with the emergency lights, indicating a successful procedure.

READ How to choose speakers for your car radio

How to reduce the ignition support time or turn it off completely

Hello, I would like the turbo timer to work immediately after the ignition is turned off. And not after ignition support (6 minutes) alarm A93 2can-2lin.

Emergency shutdown of alarm without key fob

To emergency turn off the Starline A93 alarm without a key fob, you must use the Valet service button. They work like this:

• open the door with the key - an alarm sounds;
• turn on the ignition;
• press the service button four times within 20 seconds;
• turn off the ignition.

After this, the alarm system is turned off. You can start the car.

How to activate the turbo timer?

Starline alarm models, the procedure for activating the turbo timer function is different.

Setting the duration of starter cranking

It happens that the car does not start in cold conditions if the starter operates for about a second (Starline A91 factory settings). In this case, you can extend its operating time. The instructions are as follows:

• with the ignition off, you must press the Valet service button six times to enter the programming mode;
• after turning the key (On), the car's lights will blink six times. Then you need to press the Valet key nine more times;
• pressing any button on the key fob determines the starter rotation speed (first – 0.8 seconds, second – 1.4 seconds, third – 2.0 seconds). Long plus short click of the first button – 3.6 seconds.

To prevent the starter from turning when the engine is running, you need to connect the gray and red wire to the tachometer panel for automatic stop.

Setting up the closer

How to set the key fob to turn off

In order to avoid accidental clicks in your pocket and activation of unnecessary functions, there is an option to turn off or block the Starline A91 key fob. To do this, press the first and third buttons simultaneously. Unlocking occurs when the second and third keys are pressed simultaneously.

Reset

If various problems or car alarm glitches occur, it is recommended to reset the settings to factory settings. To remove them, you must perform the following procedure:

• the ignition key is inserted into the lock and turned to the On position;
• after this, press the Valet service key 10 times;
• Now you need to turn the key to the Off position. The machine will blink its dimensions ten times and also emit ten beeps, confirming a successful transition to the user settings reset mode;
• press the Valet button again, and the car beeps again;
• The first button on the key fob is now pressed. A short melody will confirm that the operation was successful and all parameters are returned to factory settings;
• To complete the procedure, you need to turn the key to the On position. The second way is to not press anything for ten seconds. The car itself will indicate that the exit has been completed by blinking its dimensions. The keychain will play a short melody.

How to set up the key fob after replacing the battery

• press and hold button three until the third beep. The clock on the display now flashes.
• using the first and second keys we increase or decrease this indicator;
• The next click on the third key takes you to setting the minutes. It is carried out in a similar way (keys one and two);
• Next comes setting the alarm clock, as well as setting the time on the timer;
• To confirm the parameters, just do not click anything for several seconds.

Next, you should restore the remaining parameters set by the user.