Alarm systems Starline E90 with auto start (operating and installation instructions)

At the moment, the Starline E90 security system is one of the most advanced car alarms available to motorists. The system appeared back in 2013 and provides reliable protection of the car against theft. Moreover, the Starline E90 and E90S system has additional functions that can significantly make life easier for its owner.

Installation kit includes:

• instructions for installing and using the system;
• main key fob with LCD display and immobilizer feedback. For greater security of the remote control, it is recommended to purchase a suitable case;
• central unit, which is installed on the car body and is responsible for processing and executing all commands;
• power module and radio transmitter unit;
• safety siren;
• a second key fob, which is a spare in case the main remote control is lost (it lacks an LCD display, and a red LED acts as an indicator);
• cables for connecting the CAN interface;
• main 18-pin connector;
• limit switches installed on the door, trunk and hood locks;
• engine temperature, shock and tilt sensors;
• Valet button;
• screws for fastening;
• LED indication;
• Optionally, the Starline E90 Slave system can be equipped with a GSM module to enable control of functions from the phone.

Below are detailed installation instructions with photo diagrams and configuration recommendations. How to register the Starline B9 keychain.

Function programming

The Starline E90 car alarm has a large number of functions that allow you to change user settings and make life much easier for the owner. After installing it, you can register a number of commands responsible for executing certain commands.

1. The information transfer function makes it possible to find a lost key fob. This is possible if the remote control is located within the coverage area of ​​the antenna adapter.
2. protection function using complex coding and multi-stage car locking, which prevents an attacker from stealing the vehicle.
3. The presence of a GSM module allows you to issue commands to the car using a phone call or via SMS, as well as track its current location.
4. special firmware allows you to protect the signal from the negative influence of radio interference. This greatly helps in urban environments among many reinforced concrete structures that dampen the radio signal.
5. The owner of a car with a Starline E90 alarm system can set the remote start settings. The car will start if you press a certain combination of keys, after a certain period of time has passed, an alarm has sounded, or a certain temperature has been reached. To do this, the car must be placed in neutral and the handbrake raised to the working position.
6. The system is equipped with shock and tilt sensors, which have two stages of operation and are capable of notifying the owner of attempts to enter the interior or of a vehicle impact. If the system is triggered too often and the alarm icon is on, you can set up an alternative sensitivity (there are special adjustments on the sensors for this).
7. Additionally, there are other parameters (for example, turbo timer), which are configured according to a special table.

Advantages and disadvantages

The main advantages of the Starline car alarm include:

• Support for a large number of useful functions that ensure maximum safety and comfort of operating the machine. These include: feedback, autorun programming, etc.
• Possibility of remote engine start.
• The use of GSM communication channels to send important information about the condition and coordinates of the vehicle from anywhere in the world.
• Availability of a CAN interface. Due to the presence of this element, the process of connecting the “signaling” is greatly simplified. The user will not need to be connected to the standard electrical network.
• Low power consumption. With an extensive range of functions, the system consumes a small amount of electricity and is not afraid of wear. Battery life reaches 60 days.
• Availability of a detailed instruction manual. Having studied it, the user can independently change the alarm settings or reprogram it for himself.

As for the shortcomings, there are few of them. First of all, this is the lack of stability of autostart operation in the presence of a standard immobilizer. To fix problems, just use the blocking bypass module. Users also point out poor signal reception quality, although the manufacturer claims different information.

Connection diagram for Starline E90 alarm system with auto start

To install the Starline E90 alarm system on a car you will need:

• set of wrenches with socket heads;
• drill with drills;
• soldering kit: blowtorch, rosin, tin, etc.;
• heat shrink tubes, insulating tape.

There are several main points that should be taken into account during installation, no matter whether the installation is on a VAZ or Nissan Terrano.

Car alarms are installed exclusively on cars with an electrical circuit of 12 volts. It is advisable to place the main unit in a place protected from vibrations. The most preferable installation location is under the dashboard - this guarantees concealment from prying eyes, as well as a minimum length of connecting wires. The block is fixed using self-tapping screws or double-sided tape to eliminate the possibility of spontaneous movement. A transceiver with a signal diode is mounted on the windshield of the car. The main condition is a distance of at least 5 centimeters from metal parts in order to avoid interference or distortion when receiving signals. The interior temperature sensor is mounted so that it is away from heat sources or direct sunlight for it to work correctly. The engine temperature sensor must be mounted on its body using one of the M6 ​​bolts. It is advisable to attach it closer to the crankcase cover rather than the cylinder head.

A siren is also mounted in the engine compartment. The main condition is to avoid moisture, and also place it away from large heat sources to prevent the horn from melting. Also, the siren connection wires should not be accessible from under the car so that an attacker cannot cut them.

The shock sensor is located near the center pillar. It is advisable to mount it so that you can access sensitivity settings if it triggers too often.

The Valet service key is installed in an accessible but hidden place. The inner sides of pockets for small items, the central tunnel between the seats, the plane under the decorative plugs of the front panel, etc. are suitable.

Also, to connect and configure automatic start on vehicles equipped with a manual transmission, you will need to program the neutral and connect the limit switches to the handbrake. If the car is equipped with an automatic transmission, then the owner must move the lever to the parking position, otherwise autostart will not occur.

First, all components are mounted, and then the system is connected according to the diagram below. Power is supplied through two main wires:

• black. The negative terminal that needs to be attached to the car body is ground;
• red. The positive wire, which is recommended to be connected to the battery or ignition switch;

If the car can be started using the Start button, then the connection is made in a slightly different way:

• the red contact is attached to the battery, but through a fuse designed for a current of no more than 30 amperes;
• The blue wire is connected to the brake pedal;
• the yellow-black cable connects to the start button;
• the yellow and green contacts remain unused.

To implement autorun and turbo timer, an additional algorithm is used:

• the red wire connects to the battery;
• yellow cable to the ignition system;
• green – to the ACC output;
• blue is redundant;
• the black and yellow contact is connected to the starter.

A93 2can-lin

The “2can-lin” marking means that this alarm system includes a digital module. This module is needed for installing alarm systems in cars with more complex electronics.

Those. There are analog alarms that can send “+”, “-” (12 Volts of course), and see the presence of such signals on the wires. And there are more modern alarm systems that “communicate” with the car using a digital data stream. O's, ones.

Using the 2can-lin (2can-2lin) module, you can also use the “keyless crawler” function, of course, if such a feature is provided for this particular vehicle.

Do you need to install a car alarm in Tolyatti? Come to us, we work seven days a week, issue a certificate, and have a huge selection of alarm systems with auto start!

Call us (8482) 742-802!

redirect from https://inside63.ru/news/53-starline93and63

What else do we do:

– Installation and SALE of radar detectors and recorders

– firmware for the Grant/Kalina instrument panel to indicate engine and ambient temperature

-sale and installation of parking radars

-installation of anti-theft lock "Garanta"

– installation of the “Dragon” lock on the gearbox

Like other StarLine alarms, A63 uses a modular platform, which allows you to install additional expansion cards in the central unit, bringing it to the A93 level if necessary. Therefore, the A63 becomes an interesting option for installation on cars either without digital buses, or on those where connecting to them does not provide benefits in convenience and reliability. On Renault Logan 2, despite the presence of two CAN buses, StarLine A63 will be an excellent budget option, as it works great in an “analog” connection.

There is no point in choosing this system for a subsequent upgrade, since subsequent additional installation of modules will require removing the central unit, which will be difficult (and, therefore, expensive) if installed correctly. Buying an A93 with the required set of modules is a more reasonable decision.

Setting up an alarm key fob

After installing the Starline E90 car alarm, you can begin setting up custom functions. All of them are performed via the key fob, so you will need to bind the remote control. In order to bind the key fob, you must enter recording mode. To do this, you need to turn off the ignition and press the Valet service key seven times.

This key is located in places hidden from the eyes of intruders. You will need to check: the door card pockets on the inside, the central tunnel between the front seats, the space around the steering column and pedal assembly. Place under the decorative cover of the front panel near the fuse box.

Connection diagram for Starline alarm system on Toyota Aristo

You must press the Valet service button seven times and then turn on the ignition. The car will emit seven sound and light signals confirming the transition to the desired mode. On the key fob you need to hold down the first and second buttons until the remote control sounds a melodic signal. You can attach a spare key fob in the same way, the main thing is that the interval between actions does not exceed five seconds. Exiting the settings mode is done by turning off the ignition, after which the car will blink its headlights three times.

How to set the time

To perform autorun functions correctly, you must set the clock correctly. The setup is done as follows:

• on the key fob you need to press and hold the fourth key until a long beep and then until a short beep;
• Now on the screen you need to select function 1, and then press the fourth button again;
• Next comes setting the year, then the month and date, and then the clock turns on. Using the second button this value increases, and using the first button it decreases. We set the desired parameter, and then proceed to setting the minutes and similarly adjust this indicator. To remove the setup mode, you don’t need to do anything – exiting and storing the parameters will happen automatically after five seconds.

Setting the sensitivity of the shock sensor

The alarm is equipped with a two-level shock sensor, which turns on when the car is damaged or attempts to break into it. If it works too often, then you need to adjust the sensitivity. To do this, you will need to get to the sensor itself and make adjustments. The device is mounted near the front pillar; as a rule, it can be reached without much hassle. Sensitivity adjustment is carried out using a standard screwdriver (there are two adjusting screws on the sensor body). They must be turned while tapping on the car body to determine the optimal sensitivity.

Remote engine start

A car alarm allows you to start the engine remotely, warming it up just in time for the owner’s arrival. There are several ways to perform an autostart, but in all cases the car must be locked, the ignition is turned off, the gear is in neutral, and the handbrake must be applied.

You can start the car automatically after a certain period of time. To do this, place the cursor on the hourglass icon and then press the first key. At the same time, the car will blink its headlights once. Each subsequent press allows you to select the desired period of time (in increments of two hours). A long press of the first button confirms activation.

Temperature-based autostart is also available. Select the icon with the thermometer icon on the remote control, then press the first button once. We wait for confirmation from the car, then with short presses we set the required value, varying it in the range from 3 degrees to -27. Long press the first key to confirm the selection.

You can program the car to start automatically at the desired time of day. In this case, the cursor is placed on the clock icon, and then the first button is pressed. The bell symbol should light up on the screen to confirm that the function has been activated.

How to open the trunk

The Starline E90 alarm system has an additional channel that allows you to program various secondary functions. One of them is remote trunk opening directly from the key fob. To activate this option, you need to press the second button on the key fob for a long time, and then the first key briefly. After this, the car and the key fob will emit three beeps each, and the trunk compartment will unlock.

How to turn on the sound on the key fob

For more convenient alarm management during quiet times of the day, audio alerts from the key fob can be turned on and off. You can enter setup mode as follows:

• you must press and hold the fourth button until one long and two short beeps;
• After this, you need to select function No. 4, where by pressing the third and second keys, set the required parameter (Rough, Weak, or Vibration).

However, the factory settings do not provide the ability to adjust the siren volume.

User manual

The E91 operating instructions require initial setup. The key fob is supplied with a battery before starting work. Binding of the communicator is carried out by repeatedly pressing the emergency button. After turning on the ignition, the system gives 7 short signals. By holding down buttons 1 and 2, the key fob is synchronized with the head unit. Programming of basic functions is performed using the cursor method. The car alarm instructions, which we recommend printing, will help you determine the meanings of the indicators.

Autostart

The Starline E91 alarm system with auto start is controlled in the following ways:

• By command. To start the engine, press button 1 on the key fob. To turn off the engine, hold down button 1. At the same time, briefly press button 4.
• Periodically. The cursor is moved to a clock-shaped indicator. After this, press button 1. The system will emit a sound signal, and the display will show the time remaining until the engine turns on.
• By timer. The cursor is directed to the hourglass-shaped indicator, after which the 1 key is pressed. The timer parameters are set using the 1 button of the communicator. Each press increases the value by 2 hours. Save the settings by holding down key 1.

How to program

The programming table presented in the instructions will help you make the necessary settings. The desired parameter is selected by hovering the cursor over the corresponding icon. To change the value, hold down button 1 and briefly press button 2. The settings menu in Starline E91V is automatically exited after 10 seconds of inactivity.

How to turn off the alarm

If the remote control is lost, an emergency shutdown of the alarm is provided. The car owner must open the car door using the key. Then, after no more than 20 seconds, turn on the ignition and press the service button three times - this will put the car into a special mode. Turn off the ignition again - if everything went well, the car will beep twice.

If the emergency shutdown mode is selected by entering a personal code, the action algorithm is different:

• the door opens with a key;
• in 20 seconds the ignition is turned on, and the valet service button is pressed a number of times equal to the first digit of the code;
• Now the ignition needs to be turned off. If the code is two-digit, then the procedure is repeated, only the Valet button must be pressed a different number of times (equal to the second digit of the code). If the code is three-digit, then the third stage follows.

Degree of protection

Like all modern StarLine alarms, the A63 model uses a dialogue code with 128-bit AES encryption. This means that using modern means it is impossible to hack the alarm with a code grabber, and with proper installation, even a basic kit with a single blocking relay can be highly resistant to theft.

The alarm system supports operation with the StarLine R3 wireless radio locking relay - this is the main recommendation for increasing the degree of vehicle protection. Such a relay does not have a physical connection with the central unit, so it is difficult to detect it by the wires coming from the unit, and if the central unit or its radio module is physically disconnected, it continues to block startup.

Video: StarLine A63, A93 basic control functions

All car owners know that a car alarm in a vehicle can ensure its safety. The market offers for choosing such systems are multifaceted. StarLine alarms are popular, combining a good ratio of cost and quality.

About the manufacturer

StarLine occupies a leading position in the automotive security equipment market in Russia. The products are characterized by ease of installation and management, high quality indicators and reasonable prices.

It has a 3 year warranty.

The alarm is protected using the best encryption methods, taking into account the majority of professional code grabbers.

The StarLine brand belongs to the Ultrastar company, which announced itself in 1988. Since 1991, they began to produce protective systems for cars controlled remotely. The company is located in Yanino, Leningrad region.

Production capacity is 4 thousand pieces per day. Products are supplied throughout Russia and neighboring countries.

Many vehicle owners prefer StarLine car alarms:

• It has proven itself to be a reliable system at a low price.
• Its distinctive characteristic from other systems, according to car owners, is its compatibility with the start/stop button.
• It is especially convenient that when you arm the car in automatic mode, the mirrors and windows fold in.
• The user can start the heater remotely.
• When the vehicle is moving, the low beam may automatically turn on. Also, when autostart is carried out, the heated seats and windows are turned on. This functionality allows you to use the car comfortably. Its development was carried out with the introduction of the latest technologies.
• The manufacturer has provided for the presence of a multi-channel radio path. Drivers note that it provides range and provides reliable protection from city noise.
• Drivers like the fact that it has many options.
• Using CSM/GPS, you can find out about the location of the vehicle.
• The alarm is controlled by using a mobile phone.
• Among other advantages of the anti-theft system, car owners note a complex digital code. It significantly complicates attempts to hack the system.

There aren't many disadvantages. One of these, according to users, is the ability to obtain data about a car at a distance of no more than one kilometer.

Versions and technical characteristics of systems

Security and telematics complex StarLine E93

Has intelligent autostart. It also has a non-scannable dialog control code.

The key fob is characterized by shock resistance, as well as a 128-channel noise-proof transceiver with a warning radius of up to 2 thousand meters.

The presence of the highest quality components can ensure uninterrupted operation of the system in all weather conditions, ranging from -50 to +85 degrees.

When releasing car alarms, the developers used patented technologies and software solutions.

Thus, the system ensures that the battery charge remains at the proper level for sixty days.

The cost of the system is 8,200 rubles.

Car alarm Starline E93 2CAN-LIN

Characterized by ideal functioning in conditions of urban radio interference.

It provides two-way communication. The security complex has a durable keychain with an ergonomic design. The system is characterized by stable operation regardless of weather conditions.

The built-in GSM module allows the owner of the car to control it from a mobile phone.

You can purchase the system for 11,350 rubles.

Factory reset

If the car was purchased second-hand or the system periodically fails, then it makes sense to reset the Starline E90 settings to factory settings. To do this you will need:

• turn off the ignition, press the Valet service button nine times;
• turn on the ignition, listen to nine sound and light signals;
• press the service button again, listen to another signal;
• click on the first key on the remote control to confirm the factory reset;
• turn the ignition off and on again. Confirmation of a successful procedure will be five light signals from the car.

Installation instructions for Starline A9

Comfort with car alarm StarLine E91

Manufacturer Starline sought to make this security tandem not just an “opener/closer” of locks, but something more that would greatly help the owner.

The Starline E91 alarm function “car search” will allow you to find your car in a night parking lot, because when you press the key fob button, the side lights and the light in the cabin will light up.

Whether it’s very cold or very hot outside, the car’s interior will be at a comfortable temperature for you, thanks to the fact that the heater and air conditioning can be activated from the key fob.

The “turbo timer” car alarm function no longer takes care of the owner, but of the resource of the turbine of his car.

Which is better Starline A93 or E90

There are several Starine alarm models in this price category on the market. The main differences between the Starline E90 and A93 options are in the configuration of the key fob, but in terms of system functionality they are almost identical.

There are a few more differences: for example, the E90 has power locks for the central locking system, and the A93 has a relay. The first option is quieter, the second is more accurate. Another feature is the presence of the Slave function in the E90 system. In this case, the main key fob has the ability to authorize, and, therefore, a greater degree of protection.

Description of this system

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! This system is, without any doubt, one of the most innovative systems for protecting vehicles.

One of its main features is that its dialog control code is absolutely unscannable. The composition includes a keychain that is quite shock-resistant. Also, the difference between this system is that the warning range reaches 2 kilometers. Next, consider the advantages of starline e91 in the form of a list

This system is, without any doubt, one of the most innovative systems for protecting vehicles. One of its main features is that its dialog control code is absolutely unscannable. The composition includes a keychain that is quite shock-resistant. Also, the difference between this system is that the warning range reaches 2 kilometers. Next, let's look at the advantages of starline e91 in the form of a list.

• First of all, it is necessary to note the dialogue system. The direct dialogue code, with the help of which the control itself is carried out, is a rather individual system. 128-bit encryption keys will protect you almost 100% from all existing hacking methods;
• The second feature is immediate protection from many interferences. The system, called starline e91, operates in urban environments without any difficulty. This feature is present due to the fact that the transceiver system has 128 direct channels;
• The starline system successfully carries out its main task even at low temperatures. Weather conditions are not at all a hindrance to this alarm;
• In addition, the car alarm system is quite energy-intensive. After all, it can carry out its work for a long period of time.

Do-it-yourself StarLine E90 key fob repair

Sometimes the owner experiences problems with the alarm and needs to sort out the problem. For example, the car does not see the feedback key fob or does not respond to the command. Accordingly, the car does not open, does not start, and it is also impossible to select the required security mode. In this case, you need to check the condition of the power supply element of the remote control, perhaps precisely because of the weak signal, and replace the battery if necessary.

Moreover, if the car does not receive the remote control well, then this may be the fault of the transceiver located near metal parts that create interference. It needs to be placed in a more protected place.

There are also options when a car alarm goes off spontaneously. The reason for this behavior is that the shock sensor is too sensitive. Both stages (impact and hacking) can be adjusted using a standard screwdriver, reaching the sensor itself (it has special controls).

If the alarm does not work, and additional software errors appear, then it is best to reset to factory settings. After this, most of the problems should disappear, but if they cannot be fixed, then it is better to take the car to a specialized service, where qualified specialists will sort out the issue and fix all the problems, perhaps there is a mass loose or there is a bad contact somewhere. There are cases when the Starline alarm remote control receives mechanical damage, due to which the display may crack and a certain number of symbols will simply no longer be displayed. In this case, it is necessary to disassemble the key fob and replace it. To do this, you will need a new screen, a screwdriver and a set of soldering accessories (blowtorch, rosin, tin).

How to enable auto alarm on Starline key fob

Disassembly occurs as follows: unscrew the key fob and remove the old display, disconnecting it from the cable. Next, you may need to bend the contacts so that they do not rest against the board itself. Now you need to tin all the contacts on the key fob for better impulse transmission and solder the display to the cable. After assembly, the remote control should work properly.

Security

The main function of an anti-theft alarm is to protect the vehicle from illegal actions. Therefore, the largest section of the instructions is devoted specifically to this. Before arming, make sure all doors are closed, the ignition is turned off, and the parking brake is set. These are all mandatory safety requirements. After which you can turn on the alarm with one click on the “1” button. If you have not closed one of the doors, the car will respond by briefly turning on the siren, and will also blink its headlights 4 times. The corresponding icon will appear on the remote control display. The alarm system has a self-diagnosis function. If there are problems with some elements, it can show them on the key fob display. The most common error is “broken ends”. This means that the door sensor is not working in one of the doors. You should check its condition. Security can operate in both sound and silent mode.

Engine starting.

This function allows you to start the engine and warm up the car before your arrival. During one cycle, 4 startup attempts occur; if this fails, an error icon can be seen on the display. Autostart will not work when the ignition is on, or if the hood is open. The security system also blocks starting when the handbrake is off and the manual transmission is in gear.

Conclusion

Reviews about the A96 model