StarLine alarm system with auto start, operating instructions

Modern StarLine car alarms not only protect against intruders but also include many functions, one of the popular ones being the auto-start system. It can be used to control the start of the engine and other auxiliary systems.

But many car owners do not always have the opportunity to read the operating and use instructions, especially if the car was purchased second-hand. But it contains information about the functions, capabilities and features of car alarm management.

Models of Starline security systems with auto start

In 2022, the following Starline alarm models are sold: A63, B94 , D94 (Starline D94) , A9, A93, E91 , A6, A8, B6, E90, A94, A61 , B9, A91. For convenience, we have highlighted models with auto start in bold.

Starline car alarms with auto engine start function are indicated by the number “9” in the index. The second number is the device generation. The fifth generation is designated as A95, B95 and so on.

Compared to earlier models, they have the following advantages:

current consumption of 15 milliamps, which ensured battery life of more than 5 months;
increased range of the head unit, which uses the new W84R02 transceiver;
the range of the standard key fob has been increased;
improved Slave function , in which control does not occur from the main key fob;
new , less vulnerable, control channel encryption protocol;
transmission of signals in the form of block sending, increasing the processing speed and noise immunity of the packet.

The index letters indicate the following:

E - budget model;
A - a device with additional options and the ability to change the configuration to suit the characteristics of automotive systems;
B - an advanced model with the ability to connect GPS-GLONASS and GSM units and tracking via CAM bus;
D - top security and telematics systems.

Specifications

The Starline Twage A4 car alarm model has the following characteristics:

packet data transfer between the communicator and the microprocessor device is performed with dynamic signal encoding, which protects it from interception;
the signal control pulse frequency is 433.92 MHz;
the operating range of the main communicator is 1200 meters in open areas without impulse interference in the mode of receiving signals from a microprocessor device;
in signal transmission mode, the range of action of the main remote control is 600 meters;
the operating range of the spare communicator, which is not equipped with a screen and two-way communication option, is 15 meters;
car alarm Starline Twage performs its functions in a wide temperature range, ranging from -40 to +85 degrees;
The signaling system is powered by direct current in the electrical network from 9 to 18 volts, which means installation of the complex is allowed not only on cars, but also on motorcycles;
the amount of current consumed by the anti-theft complex when the protection mode is activated is 20 mA;
at the output of the electrical circuit connecting the siren, the maximum possible current is 2 amperes;
at the output of the power lines for connecting lighting devices, the current value is 7.5 amperes for each lamp;
At the output of the electrical control circuits for the door lock drive, the current value is 15 amperes.

The range of the communicator is determined by the following parameters:

location of installation of the antenna adapter in the car interior;
the place where the car and the car owner are located when using a pager;
presence of interference in the area;
weather;
battery charge;
battery charge in the communicator.

Security system capabilities

The first thing that catches your eye when you get acquainted with the electronic watchman is the abundance of simple and useful functions. The developers used a method popular in the industry: they divided the car into 9 zones and installed their own protection method for each.

Car alarm "Starline" includes:

a relay that prevents unauthorized engine starting;
sensors (micro switches) for the trunk, hood and doors;
two-level shock sensors to protect glass and body elements;
parking brake lock;
control of the ignition switch position.

Starline A93 review:

The operating instructions contain details about options that improve usability, increase security and prevent the possibility of hacking and control interception:

dynamic coding of the control signal;
turning on sound and light notifications (alarms) for a limited period of time;
disabling alarms without disarming the vehicle;
saving settings even when the power is turned off;
simulation of engine malfunction (anti-robbery mode);
the presence of an individual access code, which makes it possible to urgently turn off the alarm.

Car alarm "Starline" with auto start , according to the instructions, has several ways to notify the owner and others about an attempt to steal or enter:

turning on the siren and lights;
alarm notification via key fob with feedback;
“panic mode”, in which light and melodic alerts are forcibly turned on.

A feature inherent in the Starline series of alarm systems with autostart function is the ability to self-diagnosis. The control unit constantly scans the status of the sensors. If a malfunction is detected, it signals this to the owner using an LED indicator and a notification system via the key fob.

How the system works

All work of this system is carried out using a special, secure protocol and comes down to the simplest principles of a conventional encoder. A special algorithm with a secret code allows the key fob to process the incoming signal and send a response back to the sensor. In this case, the system turns off only when the sent and received signals match, and a confirmation is received on the key fob. All this takes just seconds!

Advantages and disadvantages

The main advantage of this function is that the ability to remotely start the engine allows you to warm up the unit and the vehicle interior before the trip.

As for the disadvantages, they may be as follows:

The option does not work correctly. The car's power unit starts up, but stalls almost immediately. Or it doesn't start at all. To solve the problem, it is necessary to install the immobilizer bypass module, if it is installed in the car as standard. You should also check the location of the transponder in the device. Make sure the engine running control cable is installed and connected correctly.
The engine does not start after four attempts. The reason may be a broken connection algorithm. To fix the problem, start the power unit and pull the parking brake lever. With the power unit running, remove the key from the lock. Then open and lock the driver's door while keeping the others closed. After this, turn on the car alarm. When the anti-theft installation is activated, the car engine should stall, and two new indicators will light up on the remote control display - in the form of a siren and a lock.

Instructions for use

The first thing owners have to deal with is mastering how to control functions and modes. Starline alarms with the popular autostart function, the operating instructions list all options for sending commands from the remote control to the control unit. For this purpose, the delivery set includes two three-button key fobs with a display and feedback (main and auxiliary).

A variety of commands are given by alternating single or double pressing of one or two buttons at the same time.

Key fobs have three main functions:

Arming with the engine running and stopped, controlling sensors, closing locks, starting and stopping the engine.
Disarming , opening locks, turning off light and sound alarms, programming switching on.
Monitoring the vehicle's condition and turning on the search mode.

The instructions for alarms with auto-start contain detailed explanations about combinations of presses. It is worth reading it carefully to avoid confusion and problems associated with the inability to get into the car interior or start the engine from autostart. It also contains a transcript of the response to commands using lighting or sound. Thanks to it, you can be sure that the receiver caught the command and the control unit carried it out.

Important: the absence of confirmation indicates a system malfunction or incorrect use of control buttons.

4. Remote extension of engine operation

By tracking the time until the engine stops on the key fob screen, the user can increase the number of minutes at any time. To do this, press button 1 for a long time until two melodic signals are heard. Each press increases the time on the key fob display by 5 minutes.

Renewal can occur any number of times. The maximum time for several attempts is 30 minutes.

Remote extension of engine operation using the Starline E90 key fob

Setting up the Starline alarm system

Initially, you need to figure out which buttons to press to launch various functions. To program the functions, you need to press the service button 5 times and turn on the ignition. Then, by short pressing buttons 2 or 3, select one of the menu items:

AF - service and security;
SF - engine start;
CH-1 - programming additional channel 1;
CH-6 - programming additional channel 6;
SO UN —volume of confirmation beeps.

To get into the autorun settings, after selecting the SF , you need to hold button 3 until a beep sounds, and then briefly press it.

Use buttons 2 and 3 to select an item, and button 1 to select its state.
Return to the main menu occurs after holding button 3 for a long time.
To exit the programming menu, you must press button 1 on the key fob or turn off the ignition.

To understand how a car alarm works, how to start a car, and what buttons are used for various functions, watch the video.

How to disable the feature

The user can turn off automatic start using the buttons on the control panel. It is impossible to completely disable the function, since the motor operation algorithms are embedded in the software of the central unit. If problems occur with automatic start, it is recommended to force reset the alarm settings and then reprogram the parameters.

Starline A9 how to enable autostart
Starline B6 autostart
Acid primer for cars
Summer tires for crossover

Starline car alarm connection diagram

To connect the alarm yourself, use our guide in a separate and detailed material. There you will find connection diagrams for different models, how to run Starline (Ultrastar, Skyline), plus detailed installation instructions.

The alarm connection diagram is given in the instructions. It has three options for controlling the engine starting:

through the ignition switch contacts;
"start-stop" button;
"start-stop" button (low current).

Depending on the design of the car, the moment of its start is recorded according to one of three indicators:

tachometer signal;
generator voltage output;
on-board network voltage level.

If possible, you need to connect the control blue-black wire (pin 8 of connector X2) to the tachometer.

Designation of icons on the keychain

A. Anti-hijack mode (on/off)
B. Auxiliary channel 3 (on/off)
C. Auto start mode based on temperature (on/off)
D. Daily auto start or alarm start mode (on/off)
E. Remote engine start/stop (on/off)
F. Silent security mode without confirmation sounds when
turning on/off mode (on/off)
G. Security mode with sound signals (on/off)
H. Remote shutdown of shock sensor
I. Valet service mode (on/off)
J. Vehicle status and interior temperature display
K. Auxiliary channel 2 (on/off)
L. Remote trunk release

Purpose of the main key fob buttons

Equipment

System Kit
The Twage A4 model kit includes the following components:

one main communicator equipped with an LCD display and a feedback option; its range is higher than that of an additional device;
a spare communicator, has a shorter range, is not equipped with a screen and a two-way communication option;
microprocessor device;
two-level sensitivity controller;
antenna adapter;
light indicator for determining the state of the signaling;
technical manual that allows you to correctly connect and launch the security system after installation;
Valet service key, used to adjust basic parameters and enter emergency mode;
limit switch for mounting on the hood;
special 30 amp relay with socket;
installation wires for connection;
User's note.

Video

User Alexander Shkurevskikh showed the process of repairing the Starline A4 communicator, in particular, replacing its display.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (100.00%)

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 3 votes, average: 5.00 out of 5)

Discuss the article:

Enabling self-start

Before performing autostart on the Starline, it is important to pre-install the temperature sensor, which will be located on the cylinder block of the propulsion mechanism or on the steel lines that supply liquid to cool overheating elements. To connect the sensor, you should use a special insulating contact, usually orange-black. After the installation operations have been completed, you can proceed to setting the parameters of the equipment itself. You need an insulating, loop cable, it will be black, which is part of the mechanism with an 18-pin connector. When installing the structure on a car with a manual transmission, it is better to open the circuit, but on a car with an automatic transmission it will be necessary to keep the circuit closed. The automated start pattern includes 4 rotations of the shaft by the starter launcher; subsequent starts increase the start timing by only 0.2 seconds.

On a diesel engine

To install autostart on a diesel engine, it is recommended to take into account the delay between the electrical contacts and turning on the starter. This time period is needed in order to warm up the glow plugs well; they are located in the head of the block. When heated, metal structures increase the heat of the air, which makes starting the starter easier. The device allows you to specify the start time, 5, 10 or 20 seconds. A standard delay of 2 seconds is required to start a gasoline engine.

After this stage, set up control of the operating process of the power unit; this is recommended to automatically turn off the starter, which will not slow down in order to protect it from overheating. The design provides for control over the drive process based on voltage data in the network; it determines this by alarms that come from the positive or negative circuit of the generator and by an impulse that transmits values to the tachometer.

If engineers have provided a special, convenient button to start and stop the engine, adjust the output algorithm (on the blue cable that will come out of the harness with 6 contacts). To go to the last stage of programming and determine the starline autostart method, press the three buttons on the controller, which are depicted as locks and a star. Before setting the engine to autostart, install the program neutral; this stage is typical for cars with an automatic transmission. After the operation has been completed, the next step is to check the correctness of the launcher process. First turn on the ignition, and then press the star symbol. A small key icon will light up on the small display. To be completely sure, it is better to conduct an additional test with the drive active. After interacting with the key icon, an additional icon will be displayed showing the exhaust gas flow outlet. If the symbols are missing, check the security system instructions and double-check the settings.

Autostart on a diesel car video