Turn off the Valet mode on the Tomahawk alarm and continue working

Tomahawk car anti-theft systems are currently considered the most optimal and ideal for any vehicle. However, these anti-theft systems have their own problems and malfunctions. In particular, a large number of Russian drivers are perplexed about the Valet mode, which is present in this system.

Many people cannot figure out how to turn this mode on and off, and also do not fully understand the full purpose of this mode. Let's try to understand this issue in more detail.

Purpose of Valet mode on Tomahawk alarms

The most important purpose of the Valet mode is that the Tomahawk anti-theft system has a large range of security services.

These services, at the same time, do not always have to be turned on in order for the car alarm system to work more efficiently over a long period of time.

In other words, if a driver leaves his own vehicle for repairs at a car workshop, then this function should be disabled so that workers can carry out a range of necessary work on the car to ensure complete safety when driving on the road surface.

When the jack mode is turned on, the zz symbols will blink on the display of the Tomahawk key fob!

There are other reasons why the Valet system mode should be disabled periodically. For example, if you leave your car in a safe place, in a garage. In this case, there is no need to use a set of security services if you are absolutely sure that your vehicle is safe in a designated location.

Page 12: Shpsh)

Attention! The text in this document was automatically recognized. To view the original page, you can use the “Original” mode.

blow), the parking lights flash 6 times, the siren emits 3 “CHIRPS”.
on the display of the key fob pager
. When the main zone of the shock sensor is triggered (strong shock),

the system will turn on the alarm mode for 25 seconds. On the display of the key fob pager

an alarm will sound.

When any other zone is triggered, the system will turn on the mode

alarm for 30 sec. An icon will appear on the key fob pager display,

corresponding to the triggered security zone (see page 4), the

To silence the alarm, press the button

alarm mode, but the vehicle will remain protected.

22. Panic mode

To enable this mode, you must press the buttons 1^

At the same time, the vehicle’s engine should not be started. Parking lights

will flash 3 times, the siren will emit 3 “CHIRPS”, drawing attention to
your vehicle.
23. “Anti-hijack” mode

To enable this mode, you must have the ignition on.

Press and hold the B/DI|E buttons at the same time. Parking lights

will flash for 30 seconds, after which the system

will turn on the alarm mode, the engine starter will be blocked. On

the @ icon will appear on the key fob pager display and an alarm will sound

To disable this mode, press the V/D button.

This mode can also be activated using the “Anti” button

hijack.” Press the “Anti-hijack” button (the vehicle’s engine must be running).

The parking lights will flash for 30 seconds, after which

the system will turn on the alarm mode, the engine starter will be blocked.
This mode will not be disabled until the
e/d button is pressed - You can also exit this mode by holding the “Anti” button

hijack” for 5 seconds.

To activate this mode, you must press and hold

,Sh simultaneously. The parking lights will flash 4 times.

Tomahawk car anti-theft systems are currently considered the most optimal and ideal for any vehicle.

The quality of their performance makes car owners purchase and install these types of car alarms, since they are incredibly reliable and easy to use.

However, these anti-theft systems have their own problems and malfunctions. In particular, a large number of Russian drivers are perplexed about the Valet mode, which is present in this system.

Many people cannot figure out how to turn this mode on and off, and also do not fully understand the full purpose of this mode. Let's try to understand this issue in more detail.

How to turn on and off the security function of the Valet mode on Tomahawk alarm systems

In general, for each alarm system, for each anti-theft complex, there are its own factory methods for enabling and disabling this security mode.

In order to become familiar with them, you must carefully review the user manual or instructions.

There are also instructions for Tomahawk car alarms, and in a special section you can see exactly how to disable this system.

So, let’s look at the full range of necessary installations and work in order to use this security mode.

A large number of security systems have a similar procedure, in which the Valet function can be disabled. If your anti-theft system does not have an instruction manual, try using the following diagram to turn off Valet mode:

1. Get into your own car, insert the key into the ignition and turn it on for literally 5 seconds, then turn off the ignition. Be sure to try to maintain this time interval, since otherwise this operation will have to be repeated again and again.
2. Then press and hold the Jack button for ten seconds. This switch can be found on the signal receiver, most often found under the steering wheel block on your vehicle.
3. The anti-theft system will sound several times, after which the LED will go out and the side lights will blink several times.

This way you were able to disable the valet service mode on the Tomahawk car alarm.

Remember that before you try to disable this security mode, you should make sure that there are switches and buttons on your alarm control key fob.

If you can't find these buttons, check your instruction manual. If you don’t have this, you will have to call the alarm manufacturer’s contact center. There is another alternative way to disable the Valet security mode. It can be used using the anti-theft system control key fob.

Get into the car, start the engine for five seconds and turn it off. Then for 10-15 seconds you need to hold down the buttons with the image of the speaker and the open lock.

The siren will also beep several times, the lights will also blink several times, and the LED will go off. All this will mean that the Valet security mode on your Tomahawk alarm system has been successfully turned off.

Subscribe so you don't miss anything important

How to disable Valet mode on Tomahawk alarm system? Use a combination of buttons on the key fob, for example, open trunk, crossed out speaker and key (for TW-9010) or press the lock / zZ key (for TW 9020 or 9030). Alternatively, you can deactivate the function using the Override button. Below we will look in detail at how to remove the Jack on the Tomahawk alarm system. Let’s look separately at what this option is and what functions it performs.

Connecting a new key fob with your own hands

The Tomahawk 9010 remote control may break at one inopportune moment. One of the frequent breakdowns of an old key fob is the display fading. I have to buy a new pager with auto start. How to program it correctly?

You can do this yourself by carefully studying the step-by-step guide in the instructions:

• turn on the ignition, there is no need to start the engine;
• press and hold the “Override” button;
• wait for four CHIRPS;
• release the “Override” button;
• simultaneously turn on the “Silent security” and “Trunk opening” modes until the signal;
• Automatic exit from setup mode after six seconds.

How to disable Valet mode

The first thing you need to start with is to make sure the key fob is working. If for some reason it does not function, disabling the Jack mode on the Tomahawk is only possible using the service button. The latter is installed by security system installers in a secret place at a distance of up to 50 cm from the control unit. Most often, the key is located under the dashboard, under the steering column, near the gas pedal, under the dashboard or behind the glove compartment. In any case, the driver must have access to the key.

Let's look at how to disable Valet mode on Tomahawk 9010, 9.5 if this option was previously enabled. Take the following steps:

• Pick up the keychain.
• Simultaneously hold down the car key with the trunk open, the crossed out speaker and the key.

• Pay attention to the parking lights, which should light up four times. The sound alarm sounds the same number of times.
• Look at the key fob screen, from which the Zz icon should disappear, and a melody will sound.

Alternatively, you can disable the option using Override. Take the following steps:

1. Turn off the ignition.
2. Click on the Jack key three times. It is better to find out where it is in advance.
3. Turn on the ignition.
4. Notice the system confirmation - three beeps and three flashes.
5. Click on Override again.
6. Two sounds and flashes indicate that you managed to disable Valet with the button.

The question is how to remove the Valet mode on the Tomahawk 9030 alarm system. The work is performed using the same key combination that is used to turn it on. Take the following steps:

• Find the Closed Lock / zZ button on the key fob.

• Click on it.
• Wait for the sound signal to appear on the main one or the color of the indicator on the additional key fob to change.

If desired, you can disable Jack mode on the Tomahawk 9030 using Override. As noted, it may be related to attackers. Externally, the product is a round “barrel” with a red button in the central part.

To turn off the function using this key, go through several steps:

1. Turn on the ignition.
2. Press Override and hold it for three seconds.
3. Pay attention to the flashing parking lights and siren - they should sound four times.
4. Check that the zz Z icon on the key fob disappears.

If the question is how to disable the Valet mode on the Tomahawk TW-9020, X5 alarm system, here you can use the instructions discussed above.

Disarming a vehicle using a PIN code

The secret PIN code consists of two digits (factory value 11). Complete the following steps.

1. Open the driver's door with the key. The siren will scream, the lighting equipment will start blinking.
2. Turn on the ignition.
3. Enter the first value of the PIN code by pressing the service key (the number of presses corresponds to the first value of the secret password).
4. Deactivate and activate the ignition.
5. Enter the second number of the PIN code using the method described above.
6. Turn off the ignition system.
7. A siren will sound and external lighting devices will flash.

Why is the mode needed?

Before turning off the Valet mode on the Tomahawk alarm, make sure that this option is no longer necessary. The function is used to activate a special mode. Its peculiarity is to turn off the security functions of the system. This option may come in handy when you take your car to a service station or car service center. At the same time, you don’t have to worry that the alarm will accidentally go off when you open the doors, hood or luggage compartment.

When Valet is turned on, the main functions of the security complex are blocked, and only service options are available to the owner, for example, remote opening / closing of doors, use of an additional channel, etc. If you disable Valet on the Tomahawk key fob or using the service button, previously deactivated functions become available again available and can be used normally.

Note that in older models of security systems, the Valet mode is used not only to disable the main alarm options, but also to configure the system. As for the new Tomahawk device models, this work is done using Override.

Experts recommend that you always switch the security system to service mode when handing over the car to unauthorized persons during repair, washing or servicing of the vehicle. After this, you need to disable the Valet mode, because otherwise the Tomahawk alarm will not work.

There are a number of other situations where it may be necessary to turn on Valet on the Tomahawk alarm:

1. The car is located in a known safe place where there is no need for the alarm to operate.
2. The vehicle is transferred for temporary use to another person.
3. The security system needs to be diagnosed or repaired.

Now you know what Valet is and how to disable it on the Tomahawk alarm system. This can be done using the buttons on the key fob or using a special service button. In the comments, share how the option is turned off on your security system, what difficulties you encountered, and how you managed to solve them.

Previous article Next article News for car owners Light bulbs on the instrument panel Color of gasoline Traffic regulations from November 1, 2020 Blood alcohol content Fine for lack of a diagnostic card Traffic regulations from July 1, 2020 Amendments to the traffic regulations 2020 Individual compulsory motor vehicle insurance license certificate will become more expensive Dry fog for cars

The Valet mode on the Tomahawk is a service option designed to disable the main alarm functions, and the Valet (Override) button itself is necessary for programming the complex, linking the key fob, enabling/disabling functions and solving other problems. Below we will look at the features of the option, how to enable and disable it if necessary.

Setting the clock, alarm and timer

To set the clock, alarm clock or timer, use button No. 3 (functions).

Setting the clock, alarm and timer

To set the time, hold down button No. 3 (functions) until the field with an electronic clock flashes on the pager screen.

• To set the current clock value:

• button No. 1 (trunk) increases the time, button No. 2 (quiet security) decreases it;
• To quickly scroll through time, hold buttons No. 1 or No. 2 in the clamped position.

• To set the current minutes:

• briefly press button No. 3 (functions) and the cursor moves to the field with minutes;
• button No. 1 (trunk) adds minutes, button No. 2 (quiet security) decreases them;
• To quickly scroll through the minutes, hold buttons No. 1 or No. 2 in the clamped position.

If, after setting the minutes, you press the F button, the alarm setting mode is activated, but if you do nothing, the key fob will save the current time and exit the setting mode.

The alarm clock is set according to the same principle as the clock. If, after setting the alarm, you press the F button, the timer setting mode will turn on; if you do nothing for a few seconds, the current alarm value will be saved and the key fob will exit the setting mode.

To immediately begin setting the timer from standby mode, press buttons No. 2 (silent security) and No. 3 (functions).

Setting the timer in standby mode

(silent security)

To button number 3

(functions)

10112012301360149015

To go directly from the standby mode to setting the alarm clock, bypassing the clock setting mode, press buttons No. 1 (trunk) and No. 3 (functions). Then they proceed according to the standard pattern.

What is Jack on Tomahawk mode?

First, let's talk about the features of the Valet option on the Tomahawk and what it is. In simple words, this is a safe mode of operation of the security system, in which it is impossible to interfere with the functioning of the alarm system. After switching to Valet mode on the Tomahawk, secrets, tags and other options for controlling the security complex are disabled. In addition, the alarm's protective functions will also not work. The only active option remains central locking, which allows you to close all doors at the same time using a button.

Emergency shutdown of the alarm using the Valet or Override button

The Tomahawk 9010 security system is turned off like this.

1. Open the driver's door with the key. The alarm mode is activated (the siren will scream, the external lighting will blink).
2. Activate the ignition, do not start the engine.
3. Press the Jack key four times.
4. Deactivate the ignition. The lights will blink twice. The alarm will emit two beeps.

What is Valet mode for?

Having understood the Valet mode on the Tomahawk alarm, what it is, it is necessary to consider an equally important point - why it is necessary to turn it on. Here we note that the Tomahawk security system has a wide range of security services. But these options do not always have to be enabled. In such circumstances, you need to know what the Valet mode on the Tomahawk alarm is and how to activate it.

Enabling may be required in the following cases:

1. Transferring the vehicle to a service station for repairs. In this case, it is advisable to disable the security options so that employees can perform the necessary work on the machine and ensure its safe operation.
2. Using an alarm in case of loss or damage of the key fob.
3. Emergency disarming of the car by pressing Valet when it is impossible to do the work using the remote control or when the alarm does not open the doors.
4. Perform special settings.

There are other reasons when the Jack function on the Tomahawk alarm is useful. It is advisable to turn it on when the machine remains in a safe place, and it is not necessary to turn on full protection. But here you need to be sure that the car is completely protected from theft.

In what cases is it necessary to turn off the alarm?

An emergency shutdown, reboot of the alarm or its complete shutdown is carried out when faced with the impossibility of getting into the car. The car does not start or does not respond to the owner’s commands due to a malfunction of the key fob or a malfunction of the alarm system itself.

The main situations that can lead to malfunctions of the security system:

1. The presence of a large amount of radio interference. This situation is typical of cities and noisy metropolises. Radio signals sent by a large number of mobile phones, Wi-Fi wireless networks and the presence of a large number of radio electronics negatively affect the operation of the device.
2. The locking system is malfunctioning. This is a fairly rare type of failure, but it cannot be ruled out. Failure of the locking unit can be caused by a mechanical shock, a dead battery, moisture on the electrical circuits, or a short circuit on the board.

How to use

Many car owners do not know how to use the Valet mode on the Tomahawk. Here you need to understand how to enable/disable the option on the system.

How to turn it on

For a better understanding, let’s look at how to enable the Valet mode on the Tomahawk alarm system on different types of security systems.

For 9010:

• Take the keychain in your hand.
• Press the buttons with the image of the trunk, the crossed out speaker and the key at the same time.

• Make sure the option is enabled. In this case, the sound and light alarm is triggered four times.
• Pay attention to the display where the inscription Zz should appear near the car and the key fob signal will sound. In general, try to study all the symbols of the key fob icons and buttons. This will make working with the signal easier.

On 9020, 9030, X5 and other Tomahawk alarm models:

• Make sure the complex is turned off.
• Press and hold the lock key / zZ.

• Wait for the key fob to beep or for the indicator color to change if an additional remote control is used.
• Click the same button again.

An alternative way to enable Jack mode on the Tomahawk is to do it using the Override service button. To do this, turn on the ignition and hold the indicated key for three seconds. Once the function is activated, the parking lights come on four times and the siren sounds.

After completing the steps discussed above, the security functions of the Tomahawk are deactivated. Most often, enabling the Valet mode is recommended in cases where the machine is transferred to third parties for use.

How to disable

After performing repair work or performing other actions, the reverse process may be required - turning on the Jack mode on the Tomahawk. After this, all functions of the security complex are activated and return to the standard operating mode (as before the moment of switching on).

The disabling algorithm is the same as the enabling situations. For example, on alarm models 9020, 9030, X5 and a number of others, just press and hold the locked key / zZ. Alternatively, you can use the Override service key. You must press and hold it for three seconds with the ignition active.

In some security systems (for example, model 9010), to turn off you need to simultaneously press the buttons with the image of a car with an open trunk, a crossed out speaker and a key. As in the case of turning on, the parking lights and sound will work four times each.

Now you know what the Valet mode on the Tomahawk alarm means, what it is for, and how to activate it. Most car owners rarely use this option. As a rule, the Valet (Override) button itself is used, which is necessary for setting up the security system, programming, and disabling/enabling some functions.

In the comments, share how you use the Tomahawk Jack mode and how relevant it is.

Previous article The following article News for car owners individual insurance in the rules of traffic rules 2020 of gasoline traffic rules since September 1, 2020 Supply for the Rights of the Rights of the MFC District of the SDA since July 1, 2020 Statement of the Paragraph Trafers for the absence of diagnostic maps in the undergoing inspection of the article

Good day to all! Modern car alarms provide a fairly extensive range of functions. The motorist may not even be aware of some of them, while many do not use the capabilities of others. And this is not entirely correct from the position of maximum vehicle protection. Many people have heard about the Valet mode, but not everyone knows what it is and why it is needed in an alarm system.

This mode is popularly known as service mode. I suggest you understand its features, understand what it is used for, how to enable and disable it.

Interestingly, there are usually many more difficulties with disabling Jack than with activating it. But it’s still easier than turning off the alarm without a key fob, as we recently talked about.

The most common malfunctions and their elimination

The Tomahawk 9010 system may experience errors that prevent it from being used normally.

The reasons that cause problems with this system include:

• broken battery;
• the vehicle is in a radio interference zone;
• lack of conditions for wave transmission;
• wear and tear of the security system itself;
• failure to synchronize the car with the remote control.

The video shows a brief overview of the 9010 model. Courtesy of the channel Alexey Viselovsky.

The battery has failed

This is the most common and easily fixable problem. Perhaps the battery is dead, which can be guessed in advance by the dimmed screen of the remote control. The reason may also be an incorrectly installed battery.

The manufacturer recommends using AAA alkaline batteries to replace the battery in the Tomahawk 9010 key fob.

To resolve the issue, the user needs to remove and reinstall the battery. If this does not solve the problem, then replace it with a new one.

Correct battery replacement in Tomahawk 9010:

• Open the key fob cover.
• Remove the old battery.
• Press the trunk release button.
• Insert a new battery.
• Close the key fob cover.
• Press the trunk release button.

Being in a radio interference zone

Being near cash collectors' vehicles or near airports and shopping centers may cause radio interference - a parameter that interferes with the normal operation of the Tomahawk system.

In this case, try a number of actions:

• bring the key fob as close as possible to the location of the security system sensor;
• press the Overr button >No conditions for wave transmission

During severe frosts, the voltage on the car battery may not be enough to start the car or unlock the doors. In this situation, only solving the problem with a faulty battery will help; it needs to be charged.

Damage to the key fob itself is also possible, which occurs due to frequent involuntary presses, in which case it will need to be repaired.

Wear and tear of the security system

Over time, the security system wears out - mechanical breakdowns of the transmitter receiving antenna appear, as well as wear and tear on the key fob or unit itself. Unfortunately, in this case, the problem can only be resolved by replacing or repairing the devices at a service center. It is not recommended to carry out such repair work yourself.

If you have a spare key fob, connect it to the system:

• Turn on the ignition without starting the engine.
• Press the combination of the “trunk open”, “silent security” and “overr” buttons >Irregularities in the synchronization of the remote control with the car

In a situation where the key fob has lost contact with the car and control of the alarm has become impossible, you will have to open the car with the key and use the emergency shutdown function.

Sequence of actions for emergency shutdown:

• Open the car with the key.
• Start the ignition.
• Press the Override button 4 times.
• Turn off the ignition.

These actions will be followed by two sound signals and double flashing of the car lights, indicating an emergency shutdown of the alarm. If this method does not help, then the system is faulty. It is necessary to contact a service center in order to repair the alarm or adjust the settings.

What it is

Valet mode or simply service mode is widely used in car alarms of various configuration levels and budgets. When this mode is activated, key functions that perform vehicle protection tasks are deactivated. That is, in fact, the car is not protected. This mode is used in situations where the car is safe; it is impossible to disarm it completely, but it is also not worth turning off the system entirely. A striking example is the transfer of a car to a car service center. By turning on the Valet, the alarm will not go off and the technician will have access to the interior, trunk or engine compartment without any problems. In this case, the keychain remains with you.

If we talk about older models, then there is another purpose for the service mode. Previous security systems implied the need to switch to Valet if it was necessary to configure the system.

Usually, when installing a car alarm that has Valet, a special button is installed. They try to put it in the most accessible place so that an attacker does not have the opportunity to use it and disarm the car.

Never tell anyone where this button is. Even if you leave the car at a trusted car service center.

Valet is found on a fairly large number of security systems designed for vehicles.

In particular, they can be found on the following signals:

• Sherkhan Magicar;
• Sheriff;
• Tomahawk;
• Cenmax;
• Jaguar;
• Pandora;
• Ghost;
• Alligator;
• Starline, etc.

In fact, motorists have two main questions:

• how to remove the mode if it is enabled;
• how to activate it.

Somehow I personally encountered the fact that after activation I stubbornly could not disable Valet on my machine. I had to dig into the instruction manual. The problem was resolved quickly. But I advise you to first look at the instructions from your manufacturer.

Reasons for disabling the security system

It is necessary to completely reboot or unlock the “alarm” of a Tomahawk car if it is impossible to get into the vehicle interior. Sometimes the car engine does not start or the system does not respond to commands sent from the communicator.

Reasons why the user needs to reboot or urgently disable the security mode:

1. The appearance of interference in the area. This problem is typical for large cities. Industrial enterprises, transformer substations, and large concentrations of mobile devices and radio equipment can jam the signal sent from the key fob. If the 434 MHz radio channel is busy, then the commands will be executed every other time or the alarm will stop responding to them altogether.
2. The locking system is malfunctioning. Such a malfunction may be caused by a mechanical shock, a low car battery, exposure to moisture on the electrical circuit of the control unit, or a short circuit.
3. Communicator failure. The user has to press the buttons several times to program functions or to disarm the car. If the alarm cannot be unlocked, this is due to either a mechanical or software malfunction of the key fob. The battery installed in the device may also be discharged.

Activation Features

Car alarms Starline, Sherkhan, Pandora and systems of other brands may have their own algorithm and features for enabling the service mode.

Once again, the first place to start is to look at the instruction manual.

In most cases, the mode is activated via a special button or using a key fob. I suggest briefly studying both options.

Let's start with the push-button switch. The following is usually done:

• the driver gets into the car;
• the key is inserted into the ignition switch;
• The ignition is turned on and off;
• wait 10 seconds;
• the button responsible for Valet is switched to active mode (On);
• if a button is used and not a switch, press it for 2 seconds;
• a sound signal appears;
• The indicator shows information that the mode is turned on.

There is usually nothing complicated here.

An alternative option could be a control panel. It is also a key fob, which is used to control the signaling system, including GSM alarm systems, on the car.

It is first recommended to check the current state of the key fob and the information displayed on it. Sometimes it happens that the alarm, security or anti-robbery mode is active. In this situation, it will not be possible to switch to Valet.

As a result, the following is done:

See alsoHow a rain sensor works on a car: how to check and adjust

• the alarm status is checked;
• the ignition is turned on;
• after 3-5 seconds it turns off;
• expected10 seconds;
• two buttons are pressed on the remote control;
• These are the open lock and speaker buttons;
• the buttons are held down for 10 seconds;
• the buttons are released;
• a sound and light signal appears;
• mode activated.

By the way, if you insert the key into the ignition when Valet is active, the alarm will probably start beeping. They say that the security is disabled.

Standard method using a key fob

In order to turn off the Tomahawk alarm altogether, follow these steps.

• Press the second button on the remote control, labeled “Open Lock.”
• The siren will sound and the hazard lights will come on.
• The door locks will open. The key fob will beep. The “Open Lock” symbol will appear on its display.

This is interesting: Who pays the fine for not having a child seat in a taxi?