How to disarm a Tomahawk alarm without a key fob

In some situations, motorists ask the question of how to turn off the Tomahawk alarm without a key fob. The reason for this may be the following factors:

• loss or breakage of the remote control;
• battery discharge.

For emergency situations, the security complex provides the ability to turn it off without additional controls. The procedure is carried out using the Override key. Depending on the modification of the alarm, the instructions and sequence of actions may differ significantly. Therefore, before performing the procedure, it is necessary to study the passport of a specific model.

The search for information is simplified by the fact that the principle of operation for all designs of Tomahawk security systems is similar.

Learn how to use the Tomahawk keychain.

How to turn off a Tomahawk alarm without a key fob

The manufacturer has provided the ability to disable the security system without a remote control. For this, the Override key and a programming table are usually used. The procedure is used by users if the key fob is broken or the remote control is lost. It is important to know that the sequence of actions for certain types of security systems may differ. The following are general instructions.

1. Unlock the car door with a regular key.
2. Get into the car and insert the key into the ignition lock. At the same time, the security will work and the car will begin to emit alarm signals.
3. Find and press the Override key the required number of times.
4. If everything is done correctly, the unit will be turned off and the machine will emit the appropriate number of chirps as confirmation of the command.

Find out what 2 1 daily means on the Tomahawk keychain.

General recommendations

As has been demonstrated, keyless disabling on the Tomahawk is too primitive and is not considered to meet the requirements for burglary resistance of security systems. Therefore, it is worth additionally protecting yourself:

1. Do not use the “traditional” installation locations for the Override button - under the instrument panel, behind the interior fuse box hatch.
2. Replace the standard button with another one - for example, with a fake toggle switch for turning on the fog lights. The wiring should not give itself away, openly going to the central alarm unit.

The ideal option is to install an additional immobilizer with a wearable tag as the main barrier to protect the car. In this case, an obviously cheap alarm will be more of a “distraction”, while the presence of an immobilizer will not give itself away. Think about mechanical anti-theft devices, not forgetting that they also differ in effectiveness - this is written about in the corresponding article. However, in total it will cost the same as purchasing a higher-class alarm system.

Therefore, it is worth thinking about cheaper ways to protect the car if financial issues become the main reason for purchasing a budget alarm system - install a “secret” toggle switch for blocking important engine circuits, repin the OBD connector to make it more difficult to disable the car’s standard immobilizer, and so on. Taken together, these simple measures can already protect the car, especially since there is no point for a thief to bother with inexpensive cars for a long time; you can try to steal one of the many of the same type.

How to turn off Tomahawk alarm from key fob

In order to disarm a car in standard mode, you must use the supplied remote control. It does not matter which module will be used - spare or main. The basic functionality of the remotes is no different.

A special feature is that each complex starts the shutdown procedure in its own way. To be able to control it correctly, you need to study the instructions, however, in the most common versions, disarming is performed by pressing a key with a pattern of an open lock or a combination of buttons where the specified element is present.

Reasons for disabling the security system

It is necessary to completely reboot or unlock the “alarm” of a Tomahawk car if it is impossible to get into the vehicle interior. Sometimes the car engine does not start or the system does not respond to commands sent from the communicator.

Reasons why the user needs to reboot or urgently disable the security mode:

• The appearance of interference in the area. This problem is typical for large cities. Industrial enterprises, transformer substations, and large concentrations of mobile devices and radio equipment can jam the signal sent from the key fob. If the 434 MHz radio channel is busy, then the commands will be executed every other time or the alarm will stop responding to them altogether.
• The locking system is malfunctioning. Such a malfunction may be caused by a mechanical shock, a low car battery, exposure to moisture on the electrical circuit of the control unit, or a short circuit.
• Communicator failure. The user has to press the buttons several times to program functions or to disarm the car. If the alarm cannot be unlocked, this is due to either a mechanical or software malfunction of the key fob. The battery installed in the device may also be discharged.

This is interesting: When to change the oil in an Elantra automatic transmission

How to turn on a Tomahawk alarm

There are two methods you can use to properly enable Tomahawk.

1. Using a standard key fob. In this case, both factory modules are used equally. Their functionality is completely the same. Regular arming is performed by pressing a key with a closed lock design, regardless of the type of security system. More complex manipulations such as setting in quiet mode or activating additional options are performed using a combination of buttons (you need to look at the instructions for the specific model).
2. Through the service mode and the Valet key. To do this, initially study the factory manual and then follow the manufacturer’s instructions. The exact sequence of actions is described in the device programming table or in the instruction paragraph “Emergency/emergency arming”.

Find out what Valet mode is in Tomahawk.

Autostart and preparation procedure

To disable all security functions of the alarm system, use the valet mode - service mode. This mode is activated by pressing the Valet switch button. It is used when you leave your car at a car service or service station. The ability to control some service functions remains: turn on the “Panic” mode, unlock the car doors remotely.

When the power is turned off, the valet service mode is retained and can be used when servicing the vehicle. When the service mode is activated in the anti-theft system, the LED indicator will light continuously. The siren sounds a warning signal when the ignition is turned off. The valet button mode is also used to disable the security mode or immobilizer if the remote control is lost or damaged.

Many car enthusiasts are interested in knowing what Valet mode is among the many functions of modern alarm systems. It is quite difficult to understand absolutely all the options for car safety systems that have been released recently.

First of all, when choosing an alarm, you should pay attention to a number of basic functions:

• The level of protection of the car, that is, the availability of options responsible for the safety of the vehicle;
• The number of locks and the presence of additional anti-theft capabilities;
• Possibility of additionally equipping the security system with an immobilizer, GPS and other modernized devices.

Purpose and activation of the Valet option

What is Valet mode and how to use it

Starting the mode consists of the following operations:

• You should get into the car, turn the ignition on and off, spending a few seconds on this;
• In the cabin, you need to press the Valet button switch for 2 seconds;
• The above action is performed 10 seconds after the ignition is turned off;
• The security alarm will respond with one short squeak, the LED (signal indicator) will light up, confirming that the alarm has been switched to the selected mode;
• When the car security device is stable in the “Valet” mode, using the ignition switch, you will hear 2 reminder signals.

• Make sure that the system is not switched to security, alarm or anti-robbery mode;
• Next, after getting into the car, you need to briefly activate and turn off the ignition;
• After 10 seconds, you must simultaneously hold down the buttons on the remote control indicating the open lock and the speaker (10 seconds);
• The security system will respond with a short siren, the LED will light up (the system has switched to Valet mode).

Disabling Valet

• You need to get into the car, turn the key in the ignition on and off;
• After 10 seconds, you need to press and release the Valet button;
• The security system will respond with two short beeps, and the LED will blink several times simultaneously and go out;
• The alarm is functioning normally.
• To disable the option at a distance, you should briefly turn on and off the ignition in the car, after 10 seconds, press the icon of the speaker and the open lock on the remote control, and hold for 3 seconds. After two signals and deactivation of the LED, the car security system entered normal mode.

Features of Valet mode

There is also an alternative to the panic mode under consideration. Its name is Antihijack

. If the owner of the car falls into a stupor after the theft and does not immediately press the right button, which is not uncommon, and the car manages to drive away with the criminal for a considerable distance, turning on the mode will activate the security system when the door is opened or after the car is turned off.

If the alarm system does not respond to deactivating the “Jack” option from the remote control, you need to remove the batteries for 2-3 minutes and insert them back. If there is a connection between the key fob and the main unit, all the required symbols should appear on the display.

Tomahawk car anti-theft systems are currently considered the most optimal and ideal for any vehicle.

The quality of their performance makes car owners purchase and install these types of car alarms, since they are incredibly reliable and easy to use.

However, these anti-theft systems have their own problems and malfunctions. In particular, a large number of Russian drivers are perplexed about the Valet mode, which is present in this system.

Many people cannot figure out how to turn this mode on and off, and also do not fully understand the full purpose of this mode. Let's try to understand this issue in more detail.

How to turn on the Tomahawk keychain

For normal use of the security system, at least one remote control is required. Activation of the element in Tomahawk systems is made as primitive as possible. In order for the complex to turn on, just insert the battery into it and wait 1 minute for the software to load.

After completing a simple procedure, the control module will be ready for use.

Download operating instructions for Tomahawk 9010, 9020, 9030, 7010, x5 in pdf format

You can download service documentation for managing Tomahawk security systems using the following links:

How to unlock Tomahawk alarm key fob

When carried in a pocket, some users accidentally or intentionally block the remote control buttons. This option is extremely useful due to the possibility of an unexpected command being issued or the device being turned off when the module buttons are inadvertently pressed.

When studying the instructions, users know how to disable the button lock, which solves most problems. In the most common key fob models, the keys are locked by simultaneously pressing the buttons with the image of the speaker and Zz. To unlock the keys, the procedure is similar.

Note! In some versions of remote controls, the combination may differ; you must see the instructions.

Using the Valet button

Emergency shutdown of the alarm using the Valet or Override key is carried out according to the instructions.

• Open the car door with the key. The alarm mode will turn on: the siren and external lighting devices will work.
• Insert the key into the ignition. Turn on the ignition without starting the engine.
• Press the Valet key four times.
• Deactivate the ignition. The lights will blink twice. The siren will sound two times.

How to turn off a car with a Tomahawk key fob

90% of Tomahawk alarm models are equipped with the option of remote engine start and stop. The extension allows the motorist, while at home, to turn on the ignition and warm up the car in advance before the trip, which significantly saves time and provides the necessary comfort when using the security system.

Before performing the procedure, you need to carry out standard preparation and hold down the key with the key and the open lock for 3 seconds. After this, the machine will emit a characteristic chirp indicating acceptance of the command. Next, you need to click on the specified element again and the engine will start. If the battery life is programmed, the power plant will shut down on its own.

If there are no presets, you can turn off the engine using the above sequence of actions.

Settings Features

In order for the alarm to work correctly, you need to adjust the sensors before setting up:

1. First, find a sensor already installed in the cabin (as a rule, the device is located under the front panel).
2. Disarm the alarm system. Only after this is access to programming available.
3. The sensitivity scale has only a few levels, from 0 to 10. If the factory settings are installed, the indicator is at the fourth or fifth level.
4. The degree of sensor perception should be increased gradually. As rugelization progresses, it is necessary to check how and at what levels the devices operate.

How to set up and reprogram the key fob

In accordance with the technical manual, the communicator is configured as follows:

1. A working battery is installed in the key fob.
2. The key is placed in the lock and the ignition system is turned on.
3. The Jack button is pressed and held. The user needs to know in advance where this element is located (usually installers disguise it by wrapping it with electrical tape).
4. If the security complex has entered the binding and configuration menu, the siren should emit four beeps.
5. The service mode button is released.
6. On the communicator, the keys with two locks and a key are pressed simultaneously. If the siren sounds with a single signal, this indicates successful pairing of the remote control. To exit the setup menu, the user must take no action for six seconds.

How to set up autorun

Features of setting the engine to warm up automatically on command:

1. On the remote control you need to “click” on the key with the key icon.
2. If the engine starts without failure, the siren will emit a triple beep and the external lighting devices will blink three times.
3. An icon with the inscription “SE” will appear on the remote control screen, as well as an indicator of smoke from the exhaust pipe.

The nuances of setting up autorun by time:

1. In order for the motor to start at timed intervals, according to the timer, you must simultaneously press the buttons of the crossed out horn and the key. These keys on the remote control are held for several seconds until the alarm sounds. Successful activation of the option is accompanied by the appearance of an alarm clock icon on the key fob.
2. The start of the power unit will be carried out daily at the time when the user started.
3. If you need to set up the timer, then within five seconds after turning on the option you need to press one of the remote control buttons. If the start is made every hour, the key with the lock “clicks”, 2 hours - with the key, 4 hours - with the trunk open. To start the motor at a time interval of 12 hours, press the button with an indicator in the form of a crossed out horn.
4. If you want to disable the option, press the keys with the crossed out loudspeaker and the key at the same time.

The start of the power unit based on temperature is as follows:

1. The option is activated by simultaneously pressing the buttons with the open luggage compartment and the key. The parking lights or hazard warning lights should blink once, and the siren will also sound once. If the start is successful, an indicator in the form of a thermometer will appear on the key fob, and the start temperature will also be displayed. The communicator must also play a melody.
2. Using the key fob keys, you can set the starting temperature; it can range from -5 to -30 degrees.
3. To disable the option, you need to press and hold the key and trunk open buttons. The car's headlights will blink twice.

Video: setting up autorun on Tomahawk 9010

User Olzhas Zhaylaubay made a video in which he clearly showed the process of setting up automatic engine start on a car with the Tomahawk anti-theft system.

How to reset to factory settings

Resetting or returning to factory settings will eliminate some software problems in the operation of the Tomahawk 9010 alarm system.

More information on how to reset Tomahawk 9010 to factory settings:

1. The car's ignition system turns on.
2. The emergency alarm maintenance button is pressed 10 times.
3. The ignition system in the car is turned off. The siren should sound ten times.
4. To reset and reset the parameters, the emergency mode button is “clicked” once.
5. On the communicator, press the button with the icon in the form of a key.
6. The ignition is turned on. The exterior lights should flash five times.

How to unlock Tomahawk

Some users on the network ask questions about how to unlock the alarm if the complex does not respond to user commands. This can happen for several reasons.

1. Software failure inside the head module. It can only be cured by replacing the part.
2. Damage to the key fob. Sticking keys, impacts or water ingress can cause such confusion.
3. The presence of strong radio interference or a broken antenna. As an option, you can roll the car back 50-100 meters and repeat the disarming procedure using the remote control.

If the above methods do not help or are not available, the system provides the possibility of emergency unlocking of the alarm:

• open the car with a standard key;
• turn on the engine ignition;
• After activating the ignition, quickly press the Valet service button 4 times in a row.

If everything is done correctly, the car will chirp and blink the emergency lights the appropriate number of times - this indicates acceptance of the command. After which the security complex will be unlocked.

Operating rules

The Tomahawk anti-theft system is a complex electronic device. The installation, connection and configuration procedures are described in detail in the operating manual. You can carry out this work yourself, but the manufacturer strongly recommends contacting a service center. Follow the rules during operation.

1. The security device is installed only on a car with a 12V power supply.
2. Do not allow water to enter the alarm control unit, limit switches, or sensors when washing the vehicle.
3. Do not try to put metal objects inside the anti-theft system. They can damage them.
4. Do not open the control unit housing to repair any suspected damage. Do not entrust repair work to people who are incompetent in this matter.
5. Do not clean the key fob or other components of the security system with aggressive liquids. Wipe with a clean, dry cotton cloth.

Tomahawk: panic mode, how to turn it off

Panic mode is used by a motorist to attract the attention of others through the formation of loud siren sounds. The option is turned on in the standard security mode and forcibly. To activate the extension, just follow a simple procedure.

1. Turn off the ignition and remove the key from the lock cylinder.
2. Get out of the car and lock the doors (if the function is programmed in advance, there is no physical need to do this).
3. Simultaneously hold down the keys with the key/Zz and open lock icons for three seconds.
4. The car will emit a similar number of siren chirps and flashes of the emergency lights, turn on the security system on its own, and close the central locking.

Disabling the mode is done in the same way from the key fob or the Valet button.

The quiet way

In order to turn off the Tomahawk alarm altogether, follow these steps.

1. Press the second button on the remote control, labeled “Open Lock.”
2. The siren will sound and the hazard lights will come on.
3. The door locks will open. The key fob will beep. The “Open Lock” symbol will appear on its display.

Emergency shutdown of the anti-theft system provides a number of alternative methods and techniques that will help the car owner emerge victorious from this situation.

So, let's look at the most effective methods for de-energizing a car's protective systems in various circumstances.

From keychain

The most simplified option in this case involves using a standard key fob. If the main remote control has died for a long time, you can always use a spare one, if available. Disabling the alarm using it involves the same actions as when using a standard remote device.

By de-energizing

The presented method of deactivating the anti-theft system includes a number of operational actions. Namely:

• disconnecting the battery terminal;
• de-energizing/dismantling the ignition switch control wire;
• dismantling the blocking relay.

It is worth noting that in some cases finding a power relay is not an easy task. Often, for safety reasons, when installing an alarm system, the relays are located in hard-to-reach places

Emergency shutdown of the anti-theft system involves the use of a so-called secret button called “Valet”. Activating it allows you to transfer the system to the so-called service mode.

If the owner has difficulty finding it, just find the control indicator - a flickering red light. This treasured button is also installed somewhere in the immediate vicinity.

1. On the alarm remote control, press the first and second keys. The lights will light up twice.
2. Tomahawk 9030 entered silent mode.

Tomahawk alarm: how to disable sleep mode

Tomahawk has a standard passive security mode. When the function is enabled, all options available to the user are blocked, except for central locking control. This is practiced when the car is left at a service station for repairs or in a secure garage, where there is no risk of the vehicle being stolen. In this case, the driver will be provided with information about the condition of the car in real time.

You can activate the option by long pressing the “Zz” key. After which, the car will emit a short chirp. To disable the passive mode, just click on the specified key fob element again.

Vehicles with additionally installed central locking

On cars that do not have a standard central lock, electromechanical drives are installed in the doors, controlled directly by power alarm relays:

In this diagram, the following types of malfunctions are possible (cases are considered when all doors do not work at the same time; in the case of a malfunction of the drive, only one reason is clearly a violation of the drive adjustment, its malfunction or a broken wiring):

• The doors do not close, but the key fob command opens them: the built-in locking relay is faulty (the normally closed contact remains closed when the command is received). To confirm, just connect a tester or LED probe to the power wire for closing the drives: there will be a constant “ground” on it, regardless of the commands received. The central alarm unit needs to be repaired or replaced.
• The alarm does not lock or open the doors: first, you need to make sure that the alarm accepts the key fob commands by pressing other buttons. If the key fob is not recognized by the alarm, you must try to re-program it according to the instructions (in this case, all previously recorded codes will be erased, so you need to re-program the second key fob).
• The inability to reprogram key fobs is a clear sign of a failure of the alarm antenna unit. If the commands are recognized normally (in many cases, the operation of the built-in alarm relays can be simply heard), the fuses of the central locking lines are checked, the presence of constant power and ground on the power relays, as well as the absence of breaks in that part of the circuit where it is not yet connected to separate branches in the door.

How to turn off the car with the Tomahawk remote control

To turn off a running car engine and set the alarm, just press the remote control button with the picture of a key and an open lock for three seconds. After three seconds, the whitefish will chirp as a sign of receiving the command and the user needs to quickly press the button again. Immediately the engine will stall and the doors will lock.

The starter turns, but the car does not start: what to do?

When you autostart the engine of a car with a Tomahawk alarm installed, it happens that the starter spins, but the engine does not start. What are the reasons?

1. Incorrect activation of the remote start mode: the handbrake is not on, the speed is on, the autostart function on the remote control is not activated.
2. The engine lock mode was accidentally activated. Disable it and try to start the car.
3. The immobilizer is faulty. Take the car to a service center.
4. The security system control unit has failed. Contact the specialists.
5. Incorrect programming of key fob functions. Reset settings to factory defaults.

Tomahawk alarm does not disarm

If the complex is not removed from security, the reasons may be:

• the batteries in the remote controls are dead;
• keychain is damaged;
• damage inside the antenna;
• wiring is broken;
• software glitch.

In such situations, you can deactivate the mode using the Valet module or eliminate possible malfunctions.

Repair of defective twists

A common reason for the alarm to not work correctly is poor-quality twists that oxidize over time. Having opened the insulating tape, it is necessary to unwind the twist and clean the oxidized wires.

If necessary, after stripping the wires to a greater length, restore the twist and solder it with acid-free flux. The simplest option is regular rosin.

The reason for the destruction of the twist may be the insufficient length of the movable harnesses, for example, the door harness, which is excessively stretched when the door is fully opened.

In this case, the harness assembled by the alarm installer is completely disconnected, and all its wires are extended to an equal length. The junctions of the harness with the extension sections are also soldered and protected with heat-shrinkable cambric.

Reviews

Motorists' opinions on Tomahawk alarms.

Yuri:

I put the whitefish on Renault Simbol, drove it for a couple of years, and replaced it with another one. In principle, the functionality suited me, but I was tired of the constant glitches. She always doesn't like something.

Konstantin:

I use it on a car 2114 from VAZ. Overall, a good budget alarm with a good range of features. The only negative is that the unit is capricious to careless operation. You must constantly be careful not to scratch the key fob or get the modules wet during washing. Otherwise everything is fine.

Alexander:

I was driving my wife's Chevy Rezzo. Considering the budget, we can say that the whitefish is good, there are no complaints. But the quality of workmanship is poor - it’s better to fork out the cash and buy a more reliable system right away.

Equipment performance characteristics

The equipment is equipped with an innovative base unit and a new key fob, which is capable of fully performing its functions at an impressive distance. The car is reliably protected from hacking thanks to a modern encryption code.

The vehicle's on-board network voltage is monitored by a special program. The car alarm system can independently turn off sensors in accordance with zones.

The undeniable advantage of the alarm is that it has two key fobs, with which it can be controlled from a considerable distance.

One of the key fobs has a liquid crystal display, which provides convenience when using the device. Information is displayed on the display, which allows the car owner to constantly monitor the performance of the system.

The key fob is backlit, which provides convenience when operating the device in the dark. Expansion of the signaling functionality is provided due to the presence of feedback. When the key fob receives a signal, the light indication turns on, which makes it easier to control the equipment.

The equipment is protected from hacking thanks to an innovative dynamic encryption code. The key fob is used to disable the alarm.

You can easily disable the car alarm yourself using a certain algorithm of actions. You can perform this action with or without a key fob.

Subscribe so you don't miss anything important

Content

Find out how to turn off the Tomahawk 9010 alarm using the Valet button.