How to program a key fob for an Alligator alarm: setup and operating instructions

01/25/2022 2,437 Alarms

Author: Victor

Setting up key fobs for the Alligator alarm depends on the model and functions of the system, but regardless of the type, it begins with binding to the control unit. Programming is carried out according to one algorithm using the Vallet service button. If it was not possible to program the remote control in this way, then you need to contact a service center, since more modern Alligator key fobs sometimes require manual registration of the code.

[Hide]

Characteristics of the Alligator alarm

General characteristics of Alligator keychains:

  • the battery in the main key fob is used at 1.5 volts, and in the additional one - 3;
  • The main remote controls have a button locking feature to prevent accidental pressing;
  • signal transmission frequency 433-868 MHz;
  • operating range - 1200 m;
  • car search mode;
  • panic mode - siren and alarm signals are activated;
  • option to call the car owner from the salon;
  • Anti-Hijack mode - protection function against robbery;
  • Valet mode to disable all security functions of the anti-theft system.

More expensive and popular models have:

  • automatic engine start based on air temperature or timer;
  • two-way communication;
  • work radius - 2500;
  • Safe Start functions (checking logical neutral);
  • Short Stop function (arming the car while the engine is running);
  • Turbo Cooldown (after active driving and arming the turbocharged car, the engine runs for a few more minutes to cool the turbine);
  • possibility of using additional channels.

Technical description

Most Alligator key fob models, such as the S-475 and S-800-850, as well as the 875RS, have the following features:

  • programming capability;
  • LCD screen;
  • backlight;
  • vibration call;
  • alarm control at a distance of no more than 800 m.

With the Alligator key fob, you can monitor the condition of your car at any time; if something happens to the car, the miniature speaker of the key fob will notify you of the incident. Therefore, there is no need to worry about the car when it is not parked in the garage.

As soon as the system is activated (hacking), the key fob will begin to vibrate and the speaker will turn on (a sound signal). A special indicator of the zones that triggered the signal will appear on the key fob screen.

How to program the key fob?

To set up key fobs, first of all, the car owner needs to program them correctly:

  1. The Vallet service button is activated with one click (the ignition must be turned off at the time of this procedure).
  2. After activation, the Vallet key will need to be clicked three more times in a row, after which the device will emit a characteristic signal.
  3. Immediately after the signal, the owner needs to press the keys on the key fob one by one, thereby synchronizing them with the device on the car.
  4. At the end of the procedure, the ignition must be turned on and then turned off again, and only then can the operation of the security system be checked in practice.

Matvey Efimov shows how you can register and reprogram the Alligator key fob.

How to register remote controls for Alligator L models

The Alligator L pager, which has 4 buttons, can be linked as follows.

  1. Disarm the car. Turn on the ignition.
  2. Press the Jack key three times. The siren will sound once and the LED will light up once. The control unit is ready to record a new control panel for channel 1.
  3. Press key 1 or 2 on the remote control to tune to channel 1. A long siren signal will sound, indicating that programming is complete.
  4. Turn on the "Jack" button once.
  5. One sound will follow and the LED will light up twice. Channel 2 will be programmed.
  6. Press the remaining button on the communicator (if you used key 1 or 2, you cannot press it again). The siren will emit a long signal - channel 2 programming is completed.
  7. To exit the recording mode, turn on the ignition or press “Valet” twice.
  8. The siren will sound for a long time.


We also have an instruction manual for the Tomahawk TZ 9020.

Designation of buttons and their functions on Alligator key fobs

The entire line of Alligator alarms consists of 16 different models, differing in functionality:

  • A-1;
  • A-1 S;
  • A-2;
  • A-2 S;
  • A-3;
  • A-3 S;
  • A-9;
  • S-2;
  • S-2S;
  • S-300;
  • S-3S;
  • S-5;
  • S-500;
  • NS-505;
  • S-825RS;
  • SP-75RS.

ALLIGATOR A-1, A-1S and NS-505

Three-button alarm types Alligator with one-way communication and basic scan protection. With their help, the user can silently arm and disarm the car from the alarm system, as well as control the door and trunk locks remotely.

ButtonConfirmation signalsFunction
One siren signal + one turn on turn signals
  1. Arming the car.
  2. Closing doors in Valet mode.
Two additional turn signal activationsArming a car without a warning zone of a shock sensor and an additional sensor (you need to press and release the button within 5 seconds after arming the car)
Three additional turn signal activationsArming a car without both warning zones of a shock sensor and an additional sensor (you need to press and release the button twice within 5 seconds after arming the car)
Locking the doors when the car engine is running (you need to press and release the button with the security system disabled, the ignition on and the doors closed)
One siren signal + one turn on turn signalsArming with the power unit running (press and hold the button for 3 seconds)
One turn signal activationArming a car without sound
Four additional turn signal activationsArming the system with a “silent” operation mode (you need to press the second button within 4 seconds after pressing the first)
Two siren signals + two turn signals
  1. Disarming the vehicle.
  2. Opening the door in Valet mode.
Two siren signals + two turn signalsDisarming the car and opening all doors (you need to press the button within 5 seconds after disarming the car)
Two turn signalsDisarming the car without noise (press the second button within 5 seconds after pressing the first)
Opening the doors with the engine running (you need to press and release the button with the security system disabled, the ignition on and the doors closed)
Control of the security system additional channel output / control of the luggage compartment lock and other additional devices (press and hold the button for 1.5 seconds)
Turn on the sirenEnabling Panic mode from a distance (the buttons must be pressed simultaneously and held for 3 seconds with the ignition off)
Turning off the sirenDisabling Panic mode from a distance (buttons must be pressed simultaneously)
Five siren signals + 10 turn signalsSearch for a car (press the buttons simultaneously and hold for 1 second with the ignition off)
One siren signal + LED on for five secondsEnabling Anti-HiJack mode from a distance (press the buttons simultaneously and hold for 3 seconds with the ignition on)
AnyTurning off the alarm when the anti-theft system is activated

Photo gallery


Photo of model A-1


Photo of model A-1S


Photo of model NS-505

ALLIGATOR A-2, A-2S, A-3 and A-3S

The manufacturer equipped the models with three buttons and one-way communication.

Distinctive features:

  • The A-2S has a shockproof body;
  • A-3 and A-3S have a new design and self-diagnosis function.

The key fob buttons and their functions are identical for all models:

ButtonFunction
  1. Remote arming.
  2. Locking doors in service mode.
Arming with disabling the warning zone of the shock sensor and additional sensor (press the button within 5 seconds after arming the system)
Arming with disabling both zones of the shock sensor and additional sensor (press and release the button twice within 5 seconds after arming the system)
Locking the doors while the engine is running
Enabling the security mode with the engine running (press and hold the button for 3 seconds), if the arming function with the engine running is enabled
Silent arming
Arming with a “silent” operation mode (press the second button within 4 seconds after pressing the first)
  1. Remote disarming.
  2. Unlocking doors in service mode.
Disarming and unlocking all doors (press the button within 5 seconds after disarming the system).
Silent disarming (press the second button within 5 seconds after pressing the first).
Unlocking the doors while the engine is running
Control the output of additional channel No. 2 / control the trunk lock or additional devices (press and hold the button for 3 seconds)
Control the output of additional channel No. 3 / control additional devices (press the buttons simultaneously)
Remote activation of the “Panic” mode (press the buttons simultaneously and hold for 3 seconds with the ignition off)
Remote switching off of the “Panic” mode (press the buttons simultaneously)
Search for a car (press the buttons simultaneously and hold for 1 second with the ignition off)
Remote activation of the Anti-HiJack mode (press the buttons simultaneously and hold for 3 seconds with the ignition on, if the “Remote activation of the Anti-HiJack function using a key fob” function is enabled)
Remote activation and deactivation of the service mode (press the buttons simultaneously and hold for 3 seconds with the ignition on, security mode off and Anti-HiJack mode off)
AnyDisabling the alarm mode when the system is triggered

Photo gallery


A-2


A-2S


A-3


A-3S

ALLIGATOR A-9, SP-75RS and S-825RS

Of the entire “A” series of car alarms, Alligator model 9 is the only one, like the S-825RS and SP-75RS, equipped with:

  • auto start system;
  • two-way communication;
  • LCD display.


LCD display of 5-button key fob

Designation of icons on the display:

IconMeaning
Two-stage disarming mode
Service mode
Sound notification
Security mode is on
Immobilizer
Engine operation indication
Door lock
Alarm
Indication of current/programmed time or temperature
Anti HiJack Mode
Indication of an attempt to turn on the ignition in security mode/indication of the “Immobilizer” mode
Automatic engine start at low temperature
Automatic engine start at preset time
Indication of the execution of the logical netral procedure
Current time, alarm time, countdown timer
Power Saving Mode
Locking key fob buttons
Vibration alert
Security mode is disabled
Battery charge indicator
Turbo mode
Main sensor area
Timer
Driver call mode
Silent security mode
Feedback indication
Transmission mode
Automatic engine start when battery level is low
Automatic engine start by timer

Functions of the berelok buttons:

ButtonFunctionNote
Remote arming or remote door closing (in Valet mode or with the ignition on)Click
Arming a vehicle with disabling the sensor warning zonePress consistently for 5 seconds
Arming a vehicle by disabling both sensor zonesPress consistently for 5 seconds
Any button except FDisabling Alarm ModePress in alarm mode
Silent armingPress and hold
Enabling “silent” security modePress consistently for 4 seconds
Remote disarming or remote door unlocking (in service mode or with the ignition on)Click
Unlocking doors in 2 stages when disarming the systemPress consistently for 5 seconds
Silent disarmingPress and hold
Silent disarming with door unlocking in 2 stagesPress and hold the key for 2 seconds, then press and release
Channel output No. 2 (remote trunk unlocking / control of additional devices)Press and hold
Channel output No. 3 (control of additional devices)Press and hold
Enabling Panic mode from a distancePress and hold at the same time with the ignition off
Turning off Panic mode from a distancePress simultaneously
Enabling the Anti-HiJack modePress and hold simultaneously with the ignition on
Remote enable/disable Valet modePress and hold simultaneously after turning off the ignition (no more than 15 seconds should pass)
"Car search"Press the buttons simultaneously with the ignition off
Remote engine start/shutdown, activation of the “Short Stop” functionPress the button successively for 3 seconds
Extending the operating time of a car engine by 1 cycleClick
Extending engine operating time to unlimitedPress consistently for 3 seconds

Photo gallery


A-9


SP-75RS


S-825RS

ALLIGATOR C-2 and C-2C

Popular four-button samples from the more advanced line of Alligator security systems with two-way feedback.


LCD display of 4-button key fob

Designation of display icons:

IconMeaning
Shock sensor
Alarm
Countdown timer
Feedback
Radiation
Ignition on, key fob buttons locked
Vibrate alert enabled
Sound notification enabled
Anxiety
Security is on and/or doors are locked
Security is turned off and doors are unlocked
Trunk open
The door is open
Anti-robbery mode
Driver call
Engine running
Service mode enabled
Disarming mode in 2 stages
Immobilizer
Battery charge
Current time, alarm time, countdown timer

Functions of the key fob buttons Alligator C2 and C2-C:

ButtonFunctionNote
Remote arming or remote door closing (in service mode or with the ignition on)Click
Arming a car with disabling the sensor warning zonePress at any time after arming
Arming with disabling both sensor zonesPress at any time after arming and disabling the warning zone
Returning to security mode with a working sensorClick
Silent armingPress and hold for 1.5 seconds
Enabling the vehicle security mode with the engine runningPress and hold for 1.5 seconds with the ignition on
Enabling “silent” security modePress consistently for 4 seconds
Remote disarming or remote door unlocking (in service mode or with the ignition on)Click
Remote disarming with unlocking of all doors (if this function is enabled)Press sequentially
Silent disarmingPress and hold for 1.5 seconds
Channel output No. 2 (remote trunk unlocking / control of additional devices)Press and hold for 1.5 seconds
Channel output No. 3 (control of additional devices)Press consistently for 4 seconds
Remote activation of the “Panic” modePress simultaneously and hold for 1.5 seconds. with the ignition off
Remote switch off of Panic modePress simultaneously
Remote activation of the Anti-HiJack modePress simultaneously and hold for 1.5 seconds with the ignition on
Remote activation/deactivation of service modePress simultaneously and hold for 1.5 seconds
"Search for a car"Press simultaneously with the ignition off
Disabling the alarm mode when the system is triggeredClick

Photo gallery


C-2


C-2C

ALLIGATOR C-300 and S-3C

A special feature of the C-3C model with auto start is the new firmware using BACS technology. The reliability of the system lies in the fact that it picks up the signal at a distance of 600 m without any obstacles and protects against hacking.


LCD display of 4-button key fob transmitter

Designation of display icons:

IconMeaning
Shock sensor main/warning zone
Alarm clock indication
Indication that the countdown timer is on
Feedback indication
Command transmission indication
Indication of ignition on, locking of key fob buttons
Vibration alert enabled
Sound notification enabled
Alarm indication
Doors are locked
Doors unlocked
Trunk open
The door is open
Degrees Celsius
Driver call
Engine operation indication
Indication of service mode operation
Disarming mode in 2 stages
Passive engine blocking
Battery charge indicator
Indication of current time, alarm time, countdown timer
Security is on
Security disabled
GSM module connected
Indication of the execution of the “Logical Neutral” test procedure
Anti-robbery mode
Automatic engine start at preset time
Automatic engine start by timer
Automatic engine start at low temperature

Functions of the key fob buttons Alligator C-300 and C-3C:

ButtonFunctionNote
Remote arming or remote door locking (in service mode or with the ignition on)Press and release
Arming with disabling the sensor warning zonePress at any time after arming
Arming with disabling both sensor zonesPress at any time after arming and disabling the warning zone
Returning to security mode with working sensorsPress and release
Silent armingPress and hold for 1.5 seconds
Enabling “silent” security modePress successively for 4 seconds
Remote disarming or remote door unlocking (in service mode or with the ignition on)Press and release
Remote disarming with unlocking of all doors (if this function is enabled)Press sequentially
Silent disarmingPress and hold for 1.5 seconds
Channel 2 output (remote trunk release/accessory control)Press and hold for 1.5 seconds
Channel 3 output (additional device control)Press consistently for 4 seconds
Remote activation of “Panic” modePress simultaneously and hold for 5 seconds with the ignition off
Remote switch off of Panic modePress and release at the same time
Remote activation of the “Anti-HiJack” modePress simultaneously and hold for 5 seconds with the ignition on
Remote activation/deactivation of service modePress simultaneously and hold for 1.5 seconds
“Search for a car”Press and release simultaneously with the ignition off
Disabling the alarm mode when the system is triggeredPress and release
Remote start/stop of car enginePress consistently for 4 seconds
Extending engine operating time by 1 cyclePress the button, then within 4 seconds press and hold this button for 1.5 seconds again
Extending engine operating time for an unlimited timePress simultaneously and hold for 1.5 seconds

Photo gallery


C-300


C-3C

Alligator S-5 and S-500

Models are equipped with auto engine start and two-way communication.


LCD display of 5-button key fob transmitter

Icon designation:

IconMeaning
Two-stage disarming mode
Service mode
Sound notification
Indication of an attempt to turn on the ignition in security mode
Immobilizer
Engine operation indication
Door lock/Security mode
Alarm
Anti HiJack Mode
Transmission mode
Automatic engine start at low temperature
Automatic engine start at preset time
Disabling the sensor warning zone
Indication of current/programmed time or temperature
Power Saving Mode
Main shock sensor area
Vibration alert
Indication of the execution of the logic neutral procedure
Battery charge indicator
Turbo mode
GSM module connection indication
Timer
Silent security mode
Feedback indication
Alarm indication
Automatic engine start by timer
Disabling the sensor

Functions of key fob buttons for car alarms Alligator C-5 and C-500:

ButtonFunctionNote
Remote main arming or remote door locking (in service mode or with the ignition on)Click
Arming with disabling the warning zone of system sensorsPress at any time after arming
Arming with disabling both sensor zonesPress at any time after arming and disabling the system sensor warning zone
Returning to security mode with working sensorsPress at any time after turning off the system sensors
Any button except FDisabling Alarm ModePress in alarm mode
Alternative (silent) armingPress and hold
Basic activation of the “silent” security modePress sequentially
Remote main disarming or remote door unlocking (in service mode or with the ignition on)Click
Unlocking doors in 2 stages when disarming the systemPress at any time after disarming the system
Alternative (silent) disarmingPress and hold
Alternative (silent) disarming with door unlocking in 2 stagesPress and hold for 2 seconds, then press and release
Channel output No. 2 (remote trunk release/control of additional devices)Press and hold
Channel output No. 3 (remote control of additional devices)Click
Remote activation of the “Panic” modePress and hold simultaneously for 5 seconds with the ignition off
Remote switch off of Panic modePress simultaneously
Remote activation of the Anti-HiJack modePress and hold simultaneously for 5 seconds with the ignition on
Remote activation or deactivation of service modePress and hold simultaneously
"Search for a car"Press simultaneously with the ignition off
Remote start / shutdown of the engine or activation of the “Short Stop” functionPress and hold
Extending engine operating time by 1 cycleClick
Extending engine operating time to unlimitedPress sequentially

Photo gallery


C-5


C-500

How to enable engine autostart using the Alligator remote control

The Alligator alarm kit includes two remote controls: a five-button and a four-button. The engine can be started from either a 5-button or 4-button key fob. To do this, you need to know the sequence of keystrokes.

The Alligator anti-theft system allows you to independently set the auto start of the car based on temperature, control the warm-up time, and adjust the time for automatic engine start and stop.

  1. Enter service mode by holding the F key for two seconds on the main pager. The screen will turn on and a beep will sound.
  2. Press F again, the display will show “timer”. CHIRP will follow.
  3. Select the desired time period in hours (1-2-3-4-6-24). Each press will be accompanied by a squeak and the turn signals will activate.
  4. Select temperature trigger mode. The “tempo” symbol will appear on the screen. The key fob will emit a melody and the turn signals will blink. Select the required autostart temperature (-10, -15, -20, -25).
  5. To exit, press the F key for two seconds. After exiting, the symbols for the selected functions are activated on the display.
  6. To disable autorun, reset the values ​​in the menu.


We also have instructions on how to use the Tomahawk 9020 key fob on our website.

Download operating and configuration instructions in PDF

Manuals can be viewed and downloaded for free from the table:

Manuals in Russian for the use and installation of alarms
Instructions for Alligator A-1
Instructions for Alligator A-1S
Instructions for Alligator A-2
Instructions for Alligator A-2S
Instructions for Alligator A-3
Instructions for Alligator A-3S
Instructions for Alligator A-9
Instructions for Alligator C-2
Instructions for Alligator S-2C
Instructions for Alligator S-300
Instructions for Alligator C-3C
Instructions for Alligator C-5
Instructions for Alligator C-500
Instructions for Alligator NS-505
Instructions for Alligator S-825RS
Instructions for Alligator SP-75RS

Keychain Alligator D-1100 2-way TX

One of the most popular models of Alligator key fobs is the D-1100 2-way, technical specifications:

  • Interaction and control of the vehicle is carried out within a radius of up to 1 km;


    Alligator D-1100 2-way TX

  • Alert mode (in case of break-in) up to 2 km;
  • The memory is designed for the last two activations;
  • Up to seven different security modes are available;
  • If the car is lost, the key fob can be used as a search device;
  • Valet mode;
  • Improved turbo timer;
  • Ability to remotely start and stop the engine;
  • Ability to automatically control doors;
  • If the battery charge is critically low, the engine starts automatically;
  • Activation and disarming of the security mode can be done silently;
  • Monitoring engine operation using a tachometer;
  • Monitoring and maintaining the required level of on-board network.

Alligator keychains have these and many other characteristics; the development and creation of keychains took place using new technologies, and the wishes of users were also taken into account.

Alligator key fobs are distinguished by a unique 868 MHz frequency, which is twice the usual frequency, which allows maximum protection of the car from unauthorized break-ins and radio interceptions.

The main advantage of Alligator is that the built-in module can not be an ordinary car alarm, but work as a full-fledged car security system with a large range of action. Any car enthusiast can find a suitable car alarm based on the characteristics, the main thing is that Alligator has affordable prices and high quality.

How much does an Alligator alarm cost?

You can buy Alligator car alarm models at the following prices:

NamePrice, rub
Alligator A-11800
Alligator A-1S1815
Alligator A-22000
Alligator A-2S2090
Alligator A-32100
Alligator A-3S2250
Alligator A-96350
Alligator S-23900
Alligator C-2C4000
Alligator S-3004400
Alligator S-3S5400
Alligator C-58900
Alligator S-50010400
Alligator NS-5053000
Alligator S-825RS5400
Alligator SP-75RS4900
Prices are relevant for three regions: Moscow, Chelyabinsk, Krasnodar.

Malfunctions

There are different types of malfunctions, but the most common ones are:

  1. The alarm doesn't respond and nothing happens when you press the key fob. In such a situation, first of all, you urgently need to remove the alarm using the service button, then check and replace the battery. If everything is fine with the batteries, then most likely the fault is in the key fob itself, then it’s better to buy a new one (two key fobs are almost always sold in the package).
  2. The alarm does not close the car doors. Most likely, there is a malfunction in the door lock or the alarm fuses have failed; it is better not to delay with such a problem and contact a service center.
  3. The alarm goes off on its own from time to time. First of all, adjust the alarm sensitivity. If this does not help, then try changing the location or replacing the shock sensor; replacing it with a working sensor almost always helps.

Video

Point Black talks about the process of choosing a reliable signaling model from the Alligator company.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (60.00%)

No (40.00%)

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 5 votes, average: 4.60 out of 5)

Discuss the article:

Setting up the Alligator key fob and alarm

Setting sensitivity. Everything is beautiful on TV on advertising, but in reality it can be very difficult to set up the alarm correctly, for example, a motion sensor reacts to the slightest movement, the flight of birds. This problem can be solved in the service, but why spend extra money when you can save money and set everything up yourself. To do this, you need to find the alarm unit, then we find a loop of 4 wires that come out of the unit. This wiring leads to the sensor on which the sensitivity regulator we need is located. Scroll through and customize it to your liking and don't worry! Setting up the key fob Very often we buy or exchange cars, and used cars most often already have a car alarm installed; in order not to make a mistake and correctly recognize the model, you need to carefully study the key fob. One of the easiest ways is to search for a keychain on the Internet using a photo. A very convenient and simple service is located on the website – ugona.net. On the website you can specify the parameters of the key fob, such as the number of buttons, LCD screen or not. After you specify all the parameters of the key fob, click OK and study the selected key fobs using the search system. Also carefully examine the keychain for inscriptions and company brands, for example – “Alligator”


Valet button can be located in any secluded place

Valet service button If, when purchasing a used car, you forgot to ask where the Valet service button is located (this button is responsible for setting the alarm) or were simply absent when installing an alarm on the car, then you need to find the system unit. Next, we look for the black wire that comes out of it, it will lead us to the black button, which is “Valet”. It is usually installed under the driver's seat.

Connecting a new car alarm pager with feedback

Synchronization of the control panel of the Alligator anti-theft system is performed according to the following algorithm.

  1. Turn off security mode. Turn on the ignition.
  2. During the allotted period of time (fifteen seconds), turn on “Jack” three times. The system will emit three siren sounds and the LED will flash slowly.
  3. Click the “closed lock” button on the remote control. A long CHIRP will follow. The transmitter will make one sound.
  4. Repeat the previous step for the remaining key fobs.
  5. Exit recording mode by turning off the ignition or doing nothing for fifteen seconds. You will hear a short and long siren signal.
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]