How to use the Alligator 2022 alarm system: instructions, interesting features


Alarm system with auto start is a reliable means of protecting your car from theft, with which you don’t have to worry about the safety of your transport at all.

One of the most recognizable brands on the security systems market is the Russian brand Alligator..

The manufacturer has released many functional and high-tech devices that will not give thieves a single chance of success.

Page navigation:

Characteristics of the Alligator alarm

General characteristics of Alligator keychains:

  • the battery in the main key fob is used at 1.5 volts, and in the additional one - 3;
  • The main remote controls have a button locking feature to prevent accidental pressing;
  • signal transmission frequency 433-868 MHz;
  • operating range - 1200 m;
  • car search mode;
  • panic mode - siren and alarm signals are activated;
  • option to call the car owner from the salon;
  • Anti-Hijack mode - protection function against robbery;
  • Valet mode to disable all security functions of the anti-theft system.

More expensive and popular models have:

  • automatic engine start based on air temperature or timer;
  • two-way communication;
  • work radius - 2500;
  • Safe Start functions (checking logical neutral);
  • Short Stop function (arming the car while the engine is running);
  • Turbo Cooldown (after active driving and arming the turbocharged car, the engine runs for a few more minutes to cool the turbine);
  • possibility of using additional channels.

History of the Alligator alarm brand

The sharks of capitalist business are very keenly aware of the emergence of a new sales market. In the mid-90s of the last century, during the time of developed gangster capitalism, the American appeared in the country. Its interests extended to automobile and consumer electronics. Including the production of the best car alarms - the debut of the new 1997 Alligator L300.

This is how the Russian representative office of this manufacturer was born - the closed joint-stock company Saturn Hi-Tech (since 2013 JSC). It then began to promote all the best new American products on the CIS markets. Their review also included a highly marketable anti-theft product under the alarming nickname “Alligator.” The official website of the Alligator car alarm brand is https://alligator-alarms.ru.

Security system capabilities

Functionality depends on the selected model. Common features include:

  • Locks buttons from accidental pressing.
  • Control the system at a distance of 1200 to 3000 meters. Range depends on model and presence of interference.
  • Vehicle location mode.
  • “Panic”, “Anti-Hijack” and “Valet” modes.
  • Sound notification in case of burglary.
  • Automatic, remote door control: locking and unlocking.

More expensive car security devices provide a number of additional features:

  • Remote auto engine start. Activation by temperature and timer.
  • Two-way communication. Notification about the condition of the vehicle. The information is displayed on the display.
  • Short Stop function. Special protection option. Activated even if the motor is in active state.
  • Turbo Cooldown. The engine remains active for several minutes after stopping. This is necessary to cool the turbine. Relevant for long intense driving.

The Alligator alarm system, regardless of configuration, provides complete vehicle protection. All data is encrypted with codes. Each series of products is equipped with unique encryption mechanisms.

Characteristics of the anti-theft system

Almost every Alligator car alarm has the function of starting and stopping the engine from a distance. A distinctive feature is the auto-start option, which allows the driver to get into an already warmed-up car in the morning. If necessary, the car owner can set the controller on a timer so that this function is activated at a certain time.

Another feature that not all anti-theft systems from this manufacturer have is the presence of feedback. The operating principle of this function is very simple. The control unit installed in the car periodically exchanges data with the key fob with two-way communication. The key fob display displays information about the car’s protection status, and if the alarm siren starts working, the corresponding information will be displayed on the key fob. The remote control will sound alarms and vibrate.

Alligator signaling equipment

What is included with the system:

  • control device - block;
  • siren;
  • two remote controls;
  • setup and installation guide;
  • antenna module;
  • LED indicator;
  • set of installation wires and connectors;
  • immobilizer

How to determine the alarm model by key fob

The manufacturer's alarm model Alligator can be determined by the description of the appearance of its key fob:

  1. TD-350/355. Remote controls in this series have a vertical screen orientation. The device is equipped with a non-removable antenna, which is part of the housing. The keychain is made in silver with black edging.
  2. D-910. The communicator has a small screen, the area of ​​which does not exceed 1/3 of the front panel of the key fob. The device has a removable black plastic antenna and a body with round silver inserts.
  3. S-800/825/850/875. The key fob features a horizontal screen orientation with a white backlight. The body is made of dark gray plastic and equipped with a built-in antenna. This security system, unlike others, has the function of auto-starting the engine based on voltage, so the display has a characteristic icon in the form of a lightning bolt.
  4. TD-320. The device has a black body with a thin silver insert around the display and an enlarged eyelet for attaching to a keychain. The remote control screen has a vertical orientation and is distinguished by a large lock icon in the middle.

Two-way models

The company's product range includes advanced Alligator car alarms that support two-way communication. These include models:

The device went on sale in 2016 and quickly became widespread. Unlike older versions, this model supports feedback and can be controlled from a distance of up to 600 m. The maximum reception range is 1.2 km. The key fob is equipped with a digital LCD display and has a lot of flexible settings.

Optionally, the user can use CAN interfaces for connection and GSM modules. The operating frequency is 434 MHz. At the same time, radio communications are reliably protected from prohibited access using a dynamic code. Another model is made in an ergonomic style and is sold at a relatively low price.

Version C-2 also supports feedback and has an enhanced BACS protection interface. It can be used on any vehicle, including models with the Engine Start/Stop system. The manufacturer provides 5 protected zones, as well as the ability to connect additional security units.

The communication channel is reliably protected by advanced code, so the likelihood of system hacking is virtually eliminated. An LCD display with a range of up to 1.2 km is used to control operating modes.

Due to the absence of an antenna, the key fob has reduced dimensions.

All settings are concentrated on a small but informative screen. The alarm has a large number of service functions that provide maximum comfort of use and the highest degree of safety.

Available modes include:

  • Disabling the immobilizer.
  • Turbo timer.
  • Protection when the car is running.

Model range and their main capabilities

The range of Taiwanese Aliigator car alarms includes the following security systems:

  • S-800RS;
  • S-825RS;
  • S-850RS;
  • S-875RS.

The S series alarm models have a remote engine start option, but its implementation is only possible on vehicles with a manual transmission.

ALLIGATOR S-800RS

This car alarm belongs to the category of business-class devices, has the function of remote automatic engine start and feedback. The system is equipped with a five-button communicator with an LCD screen and extensive functionality.

The 800 model has the following features:

  • interactive signal encoding using the Keeloq encryption method;
  • presence of the Anti-Highjack function - engine blocking mode when attempting to forcefully seize the car;
  • the system is equipped with a FACT protection unit, designed to more effectively protect the machine;
  • the presence of a Valet service mode, used to adjust operating parameters without a key fob;
  • car alarm system with remote engine start is equipped with an additional output and has six independent security zones;
  • there are three different power unit locks, and there are also 3 additional channels for connecting a communicator;
  • using a two-level kick controller.

The system is designed to operate in an on-board network with a voltage of 12 volts. The alarm current consumption in security mode is no more than 15 mA. The main key fob is powered by 1.5 volt batteries, and the additional key fob is powered by 3V batteries. Data transmission is carried out over a channel with a frequency of 433.92 MHz.

ALLIGATOR S-850RS

The S-850RS model belongs to the Super category of devices and has a two-way data transmission channel. Information is sent using advanced dynamic BACS encoding. This ensures reliability of data transmission and its safety. To control the alarm, a communicator with a screen displays information about the operation of the system is used. The transmitter range is up to 2 km.

Standard alarm options:

  • the presence of two communicators in the set; in addition to the main one, there is a spare one, not equipped with a screen;
  • in the security complex control mode, the system’s range of action is up to 1 km;
  • the presence of an option for sound or vibration warning of alarm activation;
  • There is a clock, an alarm clock, and a countdown timer;
  • The system allows you to start the engine remotely, by command from the key fob.

ALLIGATOR S-875RS

The range of the Model 875 in alert mode is up to 2000 meters, and when operating in signal transmission conditions - up to 1 km. The system is equipped with a communicator with a screen. When the alarm system is in operation, seven zones of the vehicle are protected, each of which is indicated on the communicator display with a corresponding icon.

Main features of the S-875RS security system:

American alarm systems and Russian car enthusiasts

Metallurgy is in decline, metalworking is in complete decline, machine tool building is next to them. Construction in proud reflection on the best division of budget money. Agriculture is being finished off by network distributors. This bleak review could go on for a long time.

And only the criminal business of car theft continues to thrive. Jobs are available and there is a choice, age limit is not important, professional suitability is due to the natural selection of the best automotive specialists. There was, is and will be a demand for spare parts and inexpensive used cars. Taxes are paid exclusively in the form of bribes to the roofing services.

And only restless car owners constantly try to disrupt the smooth flow of this branded production. Cunning in her inventions, she has come up with all sorts of new products - there is plenty to choose from:

  • the best car wheel locks;
  • company numbers and stamps on glass and units;
  • branded, mechanical anti-theft protection for the steering wheel, gearbox and pedals;
  • the best security car alarms for cars with capabilities; one-way communication;
  • two-way communication;
  • change the frequency of signal reception and transmission;
  • dynamic and interactive coding;
  • installation of GSM and GPS modules.

Only the American company “Saturn Hi-Tech, Inc.”, since 1997, has launched 72nd, increasingly advanced, models of anti-theft equipment on the car alarm market, under the “Alligator” brand.

Assembled in Taiwan and sold by its distribution office, Saturn Hi-Tech CJSC, these new car alarm products have become the best in their class. With a completely affordable price scale from 4 to 12,000 rubles, some of the “Alligator” alarms, in terms of their functionality, can be classified as elite protection against car theft.

In addition, the company launched other new products from equally well-known brands:

1. car anti-theft systems;

  • popular car alarm Pantera;
  • the best APS alarm models for installation;
  • Jaguar multifunctional anti-theft systems;
  • simple monoblock alarm system KGB;
  • the best of Clifford's anti-theft systems;

2. the best consumer and automotive electronics;

  • national brand under the Prology brand;
  • high-quality WAVE-tech equipment;
  • stable and inexpensive Premiera complexes;

3. video equipment for a wide range of applications Videovox;

4. car parking sensors and the best parking sensors;

  • reliable Parkvision system complexes;
  • popular Ultravox equipment;

5. the best cable products of the highest category Prolink.

Having absorbed all the best trends in the development of anti-theft technology, the company “Saturn Hi-Tech, Inc.”, rightfully began to be considered a trendsetter in car alarms. The reliability of the Asian assembly of “Alligator” car alarms and the carelessness of Russian installation (sometimes independently) give unpredictable results. Only official automotive installation services are guaranteed to ensure the functionality of the high-tech Alligator anti-theft equipment. It is quite possible to choose one of these centers from online reviews.

Tamper resistance

There is one online resource where they offer to purchase a manufactured code grabber - a device that cracks alarm codes. This device looks like a key fob, but it fits most Alligator systems. The code of one-way key fobs, as well as the code of various pagers, is emulated. The exception, supposedly, will be one of them: we are talking about a key fob with a “diode” display (S-250/275).


Screenshot of one harmless site

Any car alarm that uses the keeloq code can be hacked. Let us clarify that this statement also applies to models with a “diode” display. It would be strange if something new was used in the S-275 or S-250 - both systems are budget. Draw your own conclusion.

You can immediately find a resource offering other similar equipment. But all Alligator models will be listed there.


Another site with code grabbers

Anyone who knows how to use search will find confirmation. We wish you success.

Connecting a security device using the example of Alligator S-275

S-275 alarm system as an example

. By and large, the general principle of connecting devices from the same manufacturer, as a rule, differs slightly.

So, if you position the alarm module in front of your face in such a way that what is on the cover is in a normal position in front of your eyes, you will get the following layout of contact groups

:

  • left – six-pin door lock connector
  • top – connectors for two shock sensors and a connector for connecting the transmitter module
  • below is the main connector where nine conductors from the car system are connected

The main point of interest is the bottom connector. This is where all the main and auxiliary devices are connected. Here is the connection diagram for the Alligator security alarm

considered by contacts
from left to right
:

  1. connecting direction indicators (white wire)
  2. voltage 12 volts from battery through 15A fuse (red wire)
  3. voltage 12 volts from the battery through a 5A fuse (white-red wire)
  4. connecting the positive contact of the siren (white-black wire)
  5. car body bus or negative battery terminal (black wire)
  6. connecting the hood and trunk limit switches (dark green wire)
  7. door limit switch via diode type D226 (brown wire)
  8. voltage 12 volts from the battery, supplied to the ignition switch (yellow wire). This wire is cut. The end from the battery is connected to the contact of the alarm module and to two contacts 30 and 85 of the starter interlock relay
  9. connects to pin 86 of the starter lock relay (orange-white wire)
  10. The end of the conductor going to the ignition switch is connected to pin 87 of the starter lock relay

Protection against unauthorized access

That's all. You can consider connecting a security device from Saturn High-Tech Group, Inc.

performed in accordance with all the rules described in the accompanying documentation. Other device models are connected to the car system in a similar way, with the possible exception of some minor changes. A correctly connected security module starts working immediately after power is applied. All that remains is to learn the functions of the control panel and you can go to sleep peacefully. Protection against unauthorized access is guaranteed by a well-known American company.

At the moment, the domestic market is actually replete with alarms - consumers are offered dozens of different models of anti-theft systems to choose from. Moreover, each of them has its own characteristics, advantages and disadvantages. What is an Alligator alarm system and what disadvantages are typical for it? Find out from this material.

Characteristics of the anti-theft system

Pros and cons of devices

Operation and Installation Guide

Methods for determining a device model using a key fob

Video “The process of checking the functionality of the Alligator alarm”

Comments and Reviews

Installation instructions

In accordance with the official manual, installation of all Alligator alarm components must be carried out with the on-board network de-energized.

If the “signaling” is mounted while the power is on, the system wires may short out, as well as failure of the electronic equipment. Malfunctions may appear in the operation of the battery.

Recommendations for placement and installation

Tips for installing elements:

  1. The microprocessor device is mounted in the vehicle interior, for example, in the free space behind the control panel or car radio. The block is fixed using self-tapping screws or plastic clamps. Installation of a microprocessor module under the hood is not allowed, since this device is not sealed. Do not install the unit on other electronic devices to prevent interference.
  2. The siren is placed under the hood of the car; the installation site must be protected from access from under the bottom of the car. Do not install devices near heating units and components. The siren horn rotates downward to prevent moisture from accumulating inside. A special bracket with bolts is used for fixation.
  3. Limit switches are mounted on metal body components in a place where there is no accumulation of moisture or leakage. It is important that the switches are not accessible when the hood or trunk is locked. The device is fixed using a special bracket, which is included in the package.
  4. The diode lamp is designed to determine the status of the alarm and is mounted on the center console. The installation location must be thought out so that the operation of the diode can be seen from the street, but the lighting source should not distract the driver while driving. To install the device, you will need to make a small hole in the dashboard. This must be done carefully so as not to damage other elements and devices.
  5. The sensitivity controller is installed on the hard surface of the partition between the passenger compartment and the engine compartment. To fix the device, use two bolts, which are included in the package. You can install the controller under the instrument panel and use plastic ties to secure it. Regardless of the installation location, the sensor must be freely accessible from the passenger compartment.
  6. The temperature controller is located on the cylinder block housing or other metal surface adjacent to the power unit.
  7. The transceiver module with antenna is installed on the inner surface of the windshield or rear window. Installation must be carried out so that the device does not block the view. If the windshield has a shielding effect, as on many modern cars, then the antenna is installed at the rear. Double-sided tape is used to secure the device.

Connection diagrams

Photos of electrical circuits for connecting elements are given in this section.


Alligator 800 block connection card


Connection diagram for model 825 RS

Connecting System Wiring

When installing it yourself, it is important to correctly connect all components of the security system. Otherwise, the alarm may work intermittently.

Main 16-pin connector

Features of connecting contacts:

  • black and white output is intended for connection to a car siren;
  • black-brown contact is used to connect to the positive input of the brake pedal and the negative element of the parking lever;
  • the red output is intended for connection to a 12-volt contact from the battery;
  • the purple wire is used to connect to the positive inputs of the door trigger and the five-pin block of the electric drive;
  • the black and yellow output is intended for connecting the status input of the autostart system, as well as the standard anti-theft installation of the car;
  • the black-green contact is used to connect to the negative output of the hood trigger or to the temperature controller connection input;
  • the dark green contact is for connecting the negative input of the luggage compartment trigger;
  • the brown output is used to connect to the negative terminal of the door trigger or the negative contact element of the five-wire block;
  • two white conductors are required for connection with pulse inputs to control the headlights;
  • The yellow-violet contact is intended for connection to terminal 50/1 of the ignition switch, in particular to the starter lock control system;
  • the black wire is the ground or ground of the car;
  • white-red output is intended for connection to the battery;
  • the dark blue contact is used to connect to the input of the second channel with programmable options;
  • the white-violet output is intended for connection to the input of a tachometer or engine fluid pressure level controller;
  • the yellow-green contact is an output for connecting to the additional blocking system;
  • The gray input is intended for connection to the contact of the third alarm channel with programmable options.

Power 6-pin connector

Connection features of this block:

  • the red contact is intended for connection to a high-current 12 volt input;
  • the orange output is used to connect the power supply circuit of accessories;
  • the white-pink contact is intended for connection to the power output of the second electrical circuit of the ignition system;
  • the purple contact is necessary to connect to the input of the power system and block the starter mechanism;
  • the red pin is also used to connect to the high current 12 volt output;
  • The pink input is intended for connection to the power supply circuit of the primary ignition line or to the input from the switch.

User Anton Bobkov showed in detail the installation procedure, as well as connecting the connectors of the microprocessor module.

Connecting electric lock drives

If the vehicle uses a three-wire central locking system, then the connection of the elements will be as follows:

  • black-blue and black-green contacts are not used;
  • red-green and red-blue outputs are intended for connection to ground;
  • the white-blue contact is necessary for connection with the standard car closure cable;
  • The white-green output is used to connect with the standard electrical circuit for opening the machine.

If the car has a three-wire central locking system with positive polarity, the connection is made as follows:

  • the black-blue and black-green contacts do not need to be touched, they are not used;
  • red-green and red-blue outputs are intended for connection to a 12-volt electrical circuit with direct current;
  • the white-blue contact is used to connect to the standard closing cable of the machine;
  • The white-green output is intended for connection to the standard electrical circuit for opening the car.

In the case of a single-wire system, the connection will be slightly different:

  • black-green and red-blue contacts are not used when performing a task;
  • the red-green output is intended for connection to the car ground;
  • the remaining cables are connected in accordance with the diagram.

In five- and four-wire systems with reverse polarity, there are no standard relays. Also, such cars may not have a central locking control unit. This is due to the fact that the 12-volt voltage is supplied directly from the ignition switch to the electrical drive devices. This provides a return output to grounding. One of the five contacts that come from the switch will always be closed to 12 volts; the position of the lock does not matter.

One or two more outputs must be connected to ground, regardless of the switch. Of the remaining two contacts, one should close to +12 volts when the lock is switched to Lock mode. The second output must be shorted to 12-volt power if the switch begins to operate in Unlock mode. In such vehicles, it is necessary to cut the standard electrical lines that come from the main switch. It is located in the driver's door.

Connecting the connectors

Features of connecting additional pads:

  1. The black 5-pin connector is for connecting the antenna module. A wire of the appropriate color must be laid from the transceiver unit to the microprocessor alarm module. It connects to a 5 pin output.
  2. The four-pin white input is used to connect an additional dual-zone controller. The connection is made in the same way - to the microprocessor module.
  3. The white four-pin output is used to connect to a two-level sensitivity controller. On a microprocessor device, this connector is located next to the power 6-pin block.
  4. The white 2-pin output is used to connect to the LED indicator.
  5. The blue 2-pin connector is intended for connection to the Valet push-button switch.

Anatomy

Rare swimming albino alligator

Alligators, like birds, exhibit unidirectional air movement through their lungs. Most other amniotes are thought to exhibit bidirectional or tidal breathing. In tidal breathing animals such as mammals, air enters and leaves the lungs through branching bronchi that end in small dead-end chambers called alveoli. Because the alveoli are dead ends for flow, the inhaled air must exit back in the same manner as it entered. In contrast, the air in an alligator's lungs makes a circular cycle, moving in only one direction through the parabronchi. Air first enters the external branch, passes through the parabronchi, and exits the lungs through the internal branch. Oxygen exchange occurs in the extensive vascular network around the parabronchi.

The alligator has a digestive system similar to that of the crocodile, with minor differences in morphology and enzyme activity. Alligators have a two-part stomach, the first smaller part containing gastroliths. This part of the stomach is thought to serve the same function as the stomach of some bird species, aiding in digestion. Gastroliths grind up food as alligators bite large or swallow smaller prey whole. This process facilitates digestion and absorption of nutrients when food reaches the second part of the stomach. Once the alligator's food is processed, it will go into the second part of the stomach, which is very acidic. It has been observed that stomach acidity increases after digestion begins. This is due to the increase in CO 2 concentration in the blood as a result of the alligator's heart being shunted from right to left. A right-to-left heart shunt in alligators means that the circulatory system will recirculate blood throughout the body rather than back to the lungs. Recirculation of blood results in higher concentrations of CO2 as well as decreased affinity for oxygen. There is evidence to suggest that during digestion, blood flow to the stomach increases, which increases the concentration of CO2, which contributes to increased secretion of gastric acid during digestion. The alligator's metabolism will also increase after eating to four times the basal metabolic rate. Alligators also have a highly folded intestinal lining that aids in the absorption of nutrients. The folds result in more surface area for nutrient absorption.

Alligators also have complex microbiomes that are not yet fully understood but may be associated with both benefits and costs to the animal. These microorganisms can be found in large surface area folds of the intestinal mucosa, as well as throughout the digestive tract. Benefits include better overall health and a stronger immune system. However, alligators remain vulnerable to microbial infections despite enhanced immunity from other microbiota.

During brumation, the digestive process is altered due to the starvation that most alligators experience during these periods of inactivity. Alligators that go long enough without food during brumation will begin a process called autophagy, where the animal begins to consume its fat reserves to maintain its weight until it can obtain enough food. There is also fluctuation in the population levels of bacterial taxa in the alligator's microbial community between seasons, which helps the alligator cope with different rates of feeding and activity.

Like other crocodiles, alligators have armor made of bony scutes. The dermal bones are highly vascularized and help in calcium balance, both to neutralize acids when the animal cannot breathe underwater and to provide calcium for the formation of eggshells.

Alligators have a muscular, flat tail that helps them move while swimming.

Two types of white alligators - albino and leucistic. These alligators are almost impossible to find in the wild. They could only survive in captivity, and they are few in number. The Aquarium of America in New Orleans houses leucistic alligators discovered in a Louisiana swamp in 1987.

Is it worth installing the alarm yourself?

The presence of a connection diagram allows you to install the Alligator car alarm yourself. In addition, to successfully complete the task, you must have skills in installing electrical wiring, plumbing tools, perseverance and accuracy. Having minimal knowledge is usually not enough, because even experienced electricians do not always take on the task of connecting such equipment.

Pros:

  • minimum expenses;
  • understanding of all processes, ease of maintenance and repair;
  • the ability to create different blocking and triggering modes to increase efficiency;
  • Increased uptime (with careful installation).

Minuses:

  1. installing an Alligator alarm with auto start yourself is a difficult task for beginners;
  2. large amounts of time (even with experience);
  3. possible loss of warranty on the car if something goes wrong.

It is not advisable to install expensive Alligator alarms with your own hands, because you need to have special tools and disassemble many elements in the cabin. If you have a new car, it is also better to entrust the installation to specialists (even if there is a connection diagram).

Standard and extended set of options

The number of security zones, each of which operates independently or is connected. It is recommended to install an Alligator car alarm with 4-6 independent control points. If an attacker turns off 1-2 security zones, this will not reduce the level of protection of the machine. Key fob functionality – budget models are equipped with an on/off button. In security systems that fall into the middle and high price ranges, the key fob is equipped with an LED screen that displays operating parameters. List of other options:

  1. Emergency shutdown - in the event of an accident or disturbance in the stability of the electrical circuit, the alarm operates unstable. The presence of a service key on the key fob allows you to quickly render the system inoperative. The driver enters the PIN code previously recorded in the settings.
  2. Range of action – it all depends on the chosen modification. The indicator ranges from 1 to 2.5 km.
  3. Main frequency range – data transfer between the system and the key fob occurs in a certain range. The authorized sales center will tell you which frequency is least susceptible to hacking in the region.
  4. Protection against forcible seizure (anti-hijack) - a special button on the key fob remotely blocks the power unit if an attacker is already inside the car.
  5. Additional defense mechanisms - a criminal genius is constantly finding new ways to take over other people's cars. Developers representatives have an immobilizer option. If a criminal breaks into the cabin and tries to start the engine, the Alligator premium car alarm will block the power unit.

The functional alligator alarm system is equipped with a key fob that prevents accidental pressing of buttons. In the description, the manufacturer indicates that the locking option is included in the kit. Protection against electronic radiation used to hack a machine is provided by a digital or built-in relay. Information about its availability is available in the operating instructions. Branded alarm system for Alligator cars includes a number of other features:

  • “comfort” - the ability to connect a sunroof closer, an electric window lift;
  • “saving” - the key fob reduces battery consumption;
  • “informing” - key fobs of premium modifications of the protective system display information about engine t;
  • “ICE protection” - reduces the wear rate of the diesel engine;
  • “timer” - turns on the engine in a given time period;
  • “search” - the driver will quickly find the car that he left in a large parking lot;
  • “Additional support” - a built-in additional power source reduces the likelihood of losing control of the alarm in the event of a low battery.

There is no limit for further perfection. The developed Alligator mid-range car alarm is equipped with additional outputs that are needed to connect new protective units.

On a note!

In the instructions, the manufacturer indicates that the system is equipped with the option of connecting at least 2 additional communication channels. If there is no such mark, then new protective blocks cannot be installed.

The principle of operation of an alarm system with auto start

Automatic start of the Alligator alarm is a universal function that can be used on different vehicles with both gasoline and diesel engines, regardless of the type of gearbox.

Modern car alarms use two autostart methods:

  • Manual remote.
  • Auto.

The first option involves pressing the corresponding key on the communicator, in which the key fob is used. The range of the device is 300-350 m. Even the latest models support control using a mobile application.

The possibility of automatic entry is necessary in cases where the driver is far from his car. The function involves starting the engine without direct action by the car owner after a specified time interval, upon reaching the specified temperature and other parameters.

When the car owner gives a signal, the starter is turned on, and the car emits several warning lights with turn signals. The key fob displays an indication of a successful start.

If the power plant does not start the first time, the equipment will make a couple more attempts, forcing the starter to make more revolutions.

The Alligator alarm system contains several working parts that operate using advanced technologies. They are adapted to aggressive operating environments and are not afraid of exposure to the cold. To ensure maximum comfort of use, the manufacturer equips the alarm with an automatic heating function, which is triggered either through the key fob or after a specified time.

The basic kit with alarms contains the following components for installation:

  • Communicator (key fob).
  • Block.
  • Antenna with transmitter.
  • Immobilizer.

The system is installed on the dashboard, and sensors and wiring are connected in turn to each working element. The side of the windshield or the body can be used as a mounting location for the antenna.

The main advantages of the function include:

  1. Remote access to vehicle operating units and systems. Feedback support allows the car owner to remotely change basic functions without getting close to the car.
  2. Ability to monitor the status of security functions. Thanks to 2-channel communication, the driver can always assess whether the anti-theft system is working and which zones are working.
  3. Support for remote engine start, which is especially useful in the cold season, when there is a need to warm up the interior.

New products from Alligator

The criminal business does not stand still. New car alarms even excite their interest. The seemingly impregnable redoubts fall, one alarm after another. More and more recent models of car alarms of all brands are joining the fight against evil. I also introduced the new products of the Alligator brand.

car alarm Alligator series C-2

  • reliable, two-way communication;
  • interactive coding with BACS technology;
  • not applicable to any engine and any gearbox;
  • Alligator C-2 range of use is more than 1200 m;
  • without remote start;
  • protection against interference in urban environments;
  • 5 independent security zones;
  • preheater control;
  • Russified car alarm key fob;
  • Anti-Hi-Jack engine muffling system;
  • turbo timer;
  • security with the engine running;
  • affordable cost of signaling.

car alarm Alligator A-3

  • Super Keeloq dynamic encoding;
  • two-way, reliable communication in urban environments;
  • metal shock-resistant keychains;
  • autostart;
  • Anti-Hi-Jack engine muffling system;
  • 6 independent security zones;
  • control via an additional sensor; interior lighting, central locking and window lifting mechanisms;
  • protection against false signals is provided;
  • Alligator car alarm series A-3 is a budget option.

Car alarm Alligator is a popular brand in the world of security alarms. Popularity earned through years of impeccable service and reliable protection against theft. The car alarm, successfully adapted to the harsh road conditions of central Russia, has undergone many years of testing for operability and maintainability in all climatic zones of the country.

There are no typical disadvantages unique to the Alligator alarm system. A decrease in the signal reception radius due to excessive interference, failures due to improper operation and unsuccessful installation are characteristic of all alarms. For inexpensive budget cars, the Alligator C-200 car alarm is better than others. Business class cars will be completely safe with the Alligator C-500 alarm system. Their service functions will be quite sufficient even for the most demanding car enthusiast, but security functions will most likely not be needed.

How to program the key fob?

To set up key fobs, first of all, the car owner needs to program them correctly:

  1. The Vallet service button is activated with one click (the ignition must be turned off at the time of this procedure).
  2. After activation, the Vallet key will need to be clicked three more times in a row, after which the device will emit a characteristic signal.
  3. Immediately after the signal, the owner needs to press the keys on the key fob one by one, thereby synchronizing them with the device on the car.
  4. At the end of the procedure, the ignition must be turned on and then turned off again, and only then can the operation of the security system be checked in practice.

Matvey Efimov shows how you can register and reprogram the Alligator key fob.

How to enable autorun

Autorun is configured according to the generally accepted instructions for Alligator models using the following methods:

  • By time.
  • By temperature.

In addition, the user can independently choose the warm-up time or specify the time interval after which the system will start working.

Before starting the system, you must ensure that the basic operating rules are followed:

  1. The car must be parked, but on the street, and not in a garage or underground.
  2. The parking brake must be engaged.
  3. On a car with a manual transmission, the shift lever is fixed in the neutral position. If the car is equipped with an automatic transmission - in the parking position.
  4. The fuel tank must be filled.
  5. You cannot activate remote start if there is a passenger or animal inside the car.

Autostart by time

To configure autorun by timer (time interval), you must perform the following steps:

  1. Hold down the snowflake button for 2 seconds. After this, a sound signal will sound, which will confirm successful entry into the settings menu.
  2. Hold the “locked” button until the clock appears on the screen and the turn signals flicker. They should blink once. There will also be 1 signal from the key fob.
  3. To change the values ​​of the time interval after which the system will try to turn on autostart and start the engine, you need to press the button with the “snowflake” the required number of times. Each subsequent fact of pressing will be accompanied by 1 light and 1 sound notification.
  4. To exit settings mode, you must wait 15 seconds and do nothing.

Autostart based on temperature

Activating automatic start based on temperature is easy. To do this, you need to press the key with the snowflake symbol for 2 seconds until one sound alert sounds.

Next, you will need to release the key and hold the “open lock” - after this another sound will be heard, and a thermometer indication will appear on the system monitor. Then press the button again and the key fob will make a short sound.

To exit settings mode, you just need to do nothing. There are no difficulties with activating autostart based on temperature.

How to disable autorun

Despite the great popularity of the automatic start function, in certain circumstances it becomes necessary to turn it off on the Alligator alarm system. Sometimes car owners consider the option to be ineffective and even worsen the vehicle’s resistance to burglary.

To disable autorun, you will need to take the following steps:

  1. First of all, you need to carefully read the step-by-step guide and find the best shutdown option. There are generally accepted methods that are suitable for most models, but sometimes they differ.
  2. Advanced models support the software function of deactivating the automatic launch with the “on/off” lever. To turn it off, just move it to the desired position.
  3. In the absence of such a function, you can select the stopping time by comparing it with the engine starting time.
  4. If the alarm system provides the ability to install an immobilizer, the driver only needs to move a short distance from the vehicle, moving away the key fob. You can also place the communicator in a metal box and take it away from the car.

If the above options do not give a positive result, you will need to seek help from specialists and reprogram the system. If difficulties arise, it is better to go to a service center and carefully study the instruction manual.

  • Alarm connection diagram Alligator S 825RS
  • Alarm Sky
  • Sherkhan Logicar autostart
  • Install an alarm with auto start

Comments and reviews

Hello! I'm interested in one slightly paranoid question! In my seven (zhiga) there is a suspicious sensor, similar to a microphone, exactly under the ashtray... in short, it’s terrible how it confuses me - sometimes I even wonder if my ex-wife put it there... guys, please dispel my doubts! Do the alarm components include such sensors...under the ashtray? Small, cylindrical in shape, the size of the phalanx of a finger, on the top of the head has a hole with a ball, on the back of the cylinder hanging on two wires, not secured anywhere, just dangling..... ...for me this is very important! Please say! ps: a friend was interested... pps: I don't smoke...

Jack button - usually included in the signaling package

Hello! When the alarm is set, the door locks close and immediately open, what is the reason?

There is an alarm LED with a button on the dashboard, I accidentally pressed the button and now it is constantly on and the sound of setting the alarm has disappeared.

Hello. The Alligator alarm has blocked the ignition system, how can I turn it off using the button, is there some kind of sequence?

The Alligator alarm system is a powerful anti-theft tool that has a lot of useful functions and settings. With its help, you can protect the vehicle from unauthorized access, as well as increase the comfort of using the machine. There are a large number of models from this manufacturer available on the market, so in order to choose the best option, you should familiarize yourself with its characteristics and operating parameters.

How to extend autorun

Sometimes it becomes necessary to start and extend the operating time of the motor by one cycle. To do this, you can use different combinations on the key fob (most often you need to single or double press *).

In any case, first of all, pay attention to the model of the remote control. For some 5-button two-way devices, you will have to click on the crossed-out speaker and AUX symbol, and for 4-button devices, you will have to click on the crossed-out speaker and “*”. The combination must be activated after startup.

By the way, on many alarm models it is possible to set an unlimited start time. For example, on S-825RS, press the open trunk icon, then press * for 3 seconds.

Common problems and their solutions

Knowing how to turn on the autostart on the Alligator alarm system does not always allow you to start the engine the first time. There are situations when autostart does not work due to technical breakdowns of the machine or configuration errors. Consider the following points here:

  • Auto start by time/temperature does not work due to disabled alarm.

  • The pressure sensor and indicator are not functioning.
  • The tachometer does not work.
  • The trunk, doors or hood are not closed.
  • The gearshift knob is not in the correct position.

  • Autostart time has expired.
  • The handbrake is not applied.

In most cases, the problem can be solved by installing a handbrake, arming the car, etc.

Knowing which button is responsible for autostart on the Alligator, you can always start the car from the key fob. Alternatively, you can set the temperature/time automatic start so that the device operates automatically.

Sources

  • https://autodvig.com/alert/brelok-dlya-signalizatsii-alligator-72397/
  • https://remontautomobilya.ru/signalizaciya-alligator-polnaya-instrukciya-po-ekspluatacii.html
  • https://PrideSaratov.ru/pro-signalizaciyu/avtosignalizaciya-alligator-instrukciya.html
  • https://AvtoKart.ru/pro-signalizaciyu/avtozapusk-alligator-instrukciya.html
  • https://autolocked.ru/avtosignalizacii/brelok-dlya-alligator
  • https://avtodigitals.ru/skhema-podklyucheniya-signalizacii-alligator/
  • https://AutoTuning.expert/avtosignalizatsiya/alligator-s-avtozapuskom.html
  • https://avtodigitals.ru/avtozapusk-alligator-kak-zavesti-s-brelka/

Description

The average weight and length of an adult American alligator is 360 kg (790 lb) and 4 m (13 ft), but they sometimes grow up to 4.4 m (14 ft) in length and weigh over 450 kg (990 lb). The largest ever recorded, discovered in Louisiana, measured 5.84 m (19.2 ft). The Chinese alligator is smaller, rarely exceeding 2.1 m (7 ft) in length. It also weighs significantly less, with males rarely exceeding 45 kg (100 lb).

Adult alligators are black or dark olive-brown with white undersides, while juveniles have bright yellow or whitish stripes that contrast sharply with their dark hide, providing them with additional camouflage among the reeds and marsh grasses.

The average lifespan of an alligator has not been measured. One of the oldest recorded lives of an alligator was that of Saturn, an American alligator who was born in 1936 in Mississippi and spent almost a decade in Germany before spending most of his life at the Moscow Zoo, where he died at the age of 83. 84 May 22, 2022. Another of the oldest recorded lives is that of Muja, an American alligator that was brought as an adult to the Belgrade Zoo in Serbia from Germany in 1937. Although there are no reliable records of his birth date, he is now in his 80s and may be the oldest alligator living in captivity.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]