Starline a64 operating instructions autostart

01/25/2022 1,640 Alarms

Author: Victor

The Starline A64 automotive security and telematics system is based on a dialogue signal encryption code, as well as a 128-channel narrowband transceiver. This allows the alarm to operate effectively even in conditions of extreme urban noise.

[Hide]

Specifications

Characteristics of the alarm for the Starline A64 2CAN Slave or Dialog car:

Data transmission when sending and receiving commands to the main control unit is carried out at a frequency of 433.05 - 434.70 MHz.
The number of radio channels over which data can be transmitted is 128.
When the key fob operates in the mode of sending signals and commands, the maximum range of the device is 800 meters. When receiving signals from the microprocessor module, the operating radius will be increased to two kilometers. But in fact, achieving such indicators is only possible in open areas, where there is practically no interference.
The operating range of the spare key fob is no more than fifteen meters.
The tilt and shock controller belongs to the class of integral three-axis sensors.
The temperature range at which the anti-theft complex optimally performs all options is from -50 to +85 degrees.
The voltage required to power the Starline A64 ranges from 9 to 18 volts. It is best to install alarms on cars and SUVs, as well as minibuses. But installation of car alarms is also allowed on motorcycles.
The amount of current that the anti-theft complex consumes when the protection mode is activated is 23 mA.
The current parameter at the output of the alarm siren will be no more than 2 amperes.
At the outputs of the electrical lines of the machine's lighting devices, the current value will be no more than 7.5 amperes for each optical device.
To ensure the operation of the main communicator with a display, you will need one AAA battery, rated at 1.5 volts.
To power the spare communicator, one CR2450 class power supply rated at 3 volts is required.

Reviews from drivers using Starline A62, A64, A66 alarm systems

Reviews about the A62 alarm:

Positive	Negative
Convenient, good alarm system. It rarely works without a reason. In 4 years of use I have only changed the button on the key fob once, and it works great.	Installed on a Ford Focus in 2012. At first it worked well, but after about a year it started to malfunction. I went to the service center where they installed it for me. The guys reconfigured it, but it doesn’t work as clearly as before. The range of action has decreased and does not work the first time. I will say this: the signal is not bad, but short-lived.
Inexpensive and reliable alarm. There are all the functions for a budget car: LCD display, shock sensor, feedback. Quite enough for my Fifteen. The screen clearly shows whether the car is closed or not, and what exactly is open: the doors, trunk or hood. There is a function to block the engine in case of theft. I think that with such protection you can sleep peacefully.	Not the best option that is offered on the market. The functions are quite weak. Everything you need, for example, a GPS module, must be purchased separately. There is also no auto start, which is extremely inconvenient in winter. I got this alarm along with the car I bought. I'm using it for now, but I'm thinking of changing it soon.

Equipment

Car alarm delivery set:

Service user manual. The documentation describes all the functions and nuances regarding their management.
Warranty card.
Consumer Memo. It indicates all the nuances regarding warranty service and use of the system.
Main communicator. It has a feedback option and is equipped with a display.
Microprocessor device. Supplied in a black plastic case.
One power supply for installation in the main alarm key fob.
Spare pager.
Auxiliary relay with connection block. They are supplied in quantities of three pieces.
One limit switch for mounting on the hood. The kit also contains two self-tapping screws, a special terminal for connecting grounding and diode elements of the IN4007 type.
Antenna adapter.
The main wire is equipped with a plug with 18 contact elements.
Mounting kit of wires for connecting the antenna module, anti-theft complex inputs, CAN interface, as well as a limit switch.
Key to enter service mode.
LED indicator.
Special adapter for connecting additional controllers.

The siren is not included in the Starline A64 package; this device will have to be purchased separately.

Set of basic alarm elements Starline A64

More information about the configuration of the Starline A64 signaling can be found in the video filmed by the Unpacking Auto Products channel.

A 64 EQUIPMENT:

Main key fob with LCD display
Additional keychain
Siren S-20.3
2CAN module
Central block
Set of wires and installation materials
Set of printed materials

Rumyantsevo. Kyiv highway, building 1. Business Park Rumyantsevo (South-Western Administrative District)
Textile workers. Volzhsky Boulevard, 1, bldg. 1 (South Eastern Administrative District)
Strogino. Marshala Proshlyakova, 19 (North-West Administrative District)
October Field. Sorge street, 19 (SAO)
Lyublino. Lyublinskaya street, 72с6 (South-Eastern Administrative District)
Annino. Vostryakovsky pr-d, 10 (Southern Administrative District)
Smolenskaya. Novy Arbat, 36 (TsAO)
VDNH. Prospekt Mira, 186 (NEAD)
Krylatskoe. Osennyaya, 17 (JSC)

Key features and functionality

Signaling comfort options:

Possibility of controlling a pre-heating device for a diesel engine.
Automatic adjustment of seats for the driver. Setting this option is only possible if an electronic setting system is available.
Possibility of returning the steering column to its original state. In this case we are talking about folding.
Automatic activation of low-beam optics when the vehicle is moving. You can set the lights to turn on when you release the parking brake lever or press the brake pedal.

Availability of two-way communication. All data about the condition of the car will be transferred to the car owner's key fob.
Dialogue method of signal protection. The use of such encoding prevents the possibility of intelligent electronic hacking. This ensures protection from scanners and code grabbers.
The Starline A64 2CH Slave model supports the control option using a mobile gadget. Installation of the GSM block provides the ability to manage security and service options. Using this device, the consumer's phone can be configured to transmit data about the protection status.
In the 2KAN Slave model for monitoring via GPS channel, the consumer will not have to pay additionally for the service. The user will be able to determine the location of the machine with high accuracy (up to several meters). For monitoring, a special service from the manufacturer Starline is used.
Another feature is that Starline A64 anti-theft systems are equipped with a key fob made in a shock-resistant case. This will ensure its protection from mechanical damage and falls.
Reduced energy consumption. If a consumer leaves the car in a parking lot or garage with the alarm on, the battery will last about two months before running out.
Effective protection against interference.
2KAN Slave models are equipped with a tilt and shock controller. The three-axis integrated controller has the ability to remotely configure and adjust parameters. The device allows you to record the evacuation of the car, as well as its jacking.
Availability of power keys. This ensures hidden and silent operation of the microprocessor unit. Thanks to this feature, it is possible to protect power contacts from possible short circuits.
Availability of built-in 2CH interface. Thanks to this, the consumer will be able to quickly and conveniently, and most importantly safely, install the anti-theft system. It is important that the machine is equipped with a CAN bus.
Use of flexible service channels for data transmission. The consumer can independently configure the control parameters for the light signal, the side mirror folding system, etc.
2Slave. This interface provides the ability to control the machine's protective functions through the use of a standard communicator.

Read also: Maximum speed of the BMW E34
A detailed overview of all the features and capabilities is given in the video of the AutoAudioTsentr channel.

Functions

The alarm has the following functions:

Automatic engine start. To implement this function, the connection of auxiliary modules is required. The option can be used on vehicles with diesel or gasoline engines. The function is implemented automatically or launched upon a user command.
Establishing the location of the vehicle. The function is auxiliary; to implement it, a GSM module is installed. It allows you to connect to the desired connector with the least risk of damage to the elements of the on-board network.
Interior heater control. The option is available in vehicles with a diesel engine.
Changing the position of the main seat. The function is enabled on vehicles equipped with an electronic control system. To use this option, use separate channels.
Automatic start of low beam. The option is configured when you shift the handbrake and press the brake pedal.
Synchronization of the anti-theft system with a smartphone. Implemented when connecting an auxiliary GSM module. The device transmits information about the alarm status to the phone screen.
Economical energy consumption. When using a car alarm, the battery charge is retained for 2 months.
Application of power keys. Helps to switch the head unit to silent mode. The option is also necessary to provide short circuit protection for the terminals. Power keys are a Starline development that reduces the risk of ignition.
Slave mode. Allows the car owner to control the anti-theft system using the lock remote control. Modules are synchronized in advance.
Possibility of introducing auxiliary protective equipment. For this purpose, position change sensors are connected. There are separate terminals for installing these modules in the head unit.
Deactivating the power module. For this purpose, starting relays and electronic devices are used, connected separately.
Protecting a car with the engine running. The key can be removed from the ignition switch.
"Anti-robbery." If the vehicle is subject to unauthorized entry, the engine is blocked. Triggering of sensors or a user command allows you to block the motor. In this case, the car stops moving. The stop is carried out no later than a minute later, so the car thieves do not have time to drive a long distance.
Automatic monitoring of sensor status. If a malfunction is detected, the head unit turns off the sensor, sending a signal to the pager.
Saving data about triggered alarms with the ability to constantly study them.
Deactivation of the regulator at a distance when the vehicle protection is installed. Only the warning parts of the sensors can be turned off.
Change the volume of the sound signal. There is a vibration alert.
Deactivating key fob keys.

Advantages and disadvantages

The advantages of the device include:

uninterrupted operation of car alarms in any conditions (insensitive to interference occurring in cities);
extended operating range of communicators (equipment suppliers deliberately overestimate the figure stated in the instructions, which in reality turns out to be lower; the operating range of Starline devices does not differ from that specified by the developer);
ease of installation and use (the instructions are provided with diagrams that allow you to correctly connect all the elements);
an extended set of functions at a fairly low price;
increased strength of the key fob body (the pager is not damaged by mechanical stress).

Users cite the following disadvantages:

quick failure of the pager (the key fob becomes unusable due to the buttons sticking);
difficulty activating the Slave mode (if the option is enabled, the anti-theft system may not work correctly).

Advantages and disadvantages

Advantages of Starline A64 anti-theft systems:

System reliability. With proper connection and configuration of all elements, the consumer receives a complete complex that can provide maximum protection for the machine.
High operating radius of the communicator. Even if there is interference in the area, the range of operation of the pager will be quite large.
Ease of installation and configuration. In the technical manual, the manufacturer described all the nuances regarding the installation of signaling elements and setting parameters. An inexperienced consumer, taking into account all the advice, will be able to independently install and configure the system.
Multifunctionality. The alarm system has many useful security and service options.

Communicator. Despite the shock-resistant case, according to reviews, the control buttons on it often fail. You will have to repair and replace the keys.
It may be difficult to configure the alarm if the Slave mode is used.

Self-connection of a security system to a car

To install a car alarm with your own hands, you need to have some experience in working with electrical circuits and strictly follow the manufacturer's recommendations. The standard instructions for car alarms Starline A64, A62 and A66 contain a detailed diagram of the installation and connection of all elements of the system.

How to install?

Installation Guide:

The microprocessor module is mounted inside the car. It is not allowed to be installed in the luggage compartment or under the hood. It is advisable to choose a hidden place for installation. For example, behind the control panel or in the free space behind the center console.
Depending on the chosen installation location, the plastic lining around the steering wheel or dashboard is dismantled. There is a temperature controller inside the microprocessor unit, so the device must be installed away from heat sources. If the unit may be exposed to moisture at the installation site, it must be installed with the connector facing down to prevent liquid from getting inside. Secure the device with screws or ties to prevent it from vibrating.
The antenna module is fixed on the inner surface of the windshield (it must first be washed and degreased). There should be metal parts of the body no closer than 5 cm from the transceiver, this will ensure the best range of the communicator. Inside the antenna module housing there is a tilt and shock controller. To prevent the controller from operating without reason, it should not be placed on the plastic lining in the passenger compartment.
An LED indicator is installed on the dashboard or center console. Its installation must be done so that when blinking the light bulb is visible from the street.
A siren is being installed in the engine compartment. It should not be installed near the cylinder block or sources of moisture. The horn of the device is located downwards, this will prevent the accumulation of moisture inside. Choose a place for installation so that there is no access to the siren and its electrical circuits from under the bottom of the car. If you purchased a siren with a built-in battery (autonomous), then during installation you must ensure unobstructed access to its lock.
The service button is mounted in the cabin. It is advisable to hide it; to do this, the key can be disguised as one of the bundles with standard wiring.
After installing all the components, the electrical lines are laid under the plastic upholstery. When laying, please note that electrical circuits should be placed as far as possible from possible sources of interference. These include high-voltage cables, ignition coils, electronic devices, etc. After installation, wires should not come into contact with moving structural elements.

Photo gallery

The Avtozvuka Base channel showed mistakes that car owners may make when installing anti-theft systems.

User manual

Full use of all options is allowed only after binding the key fob.

Guide to linking the keychain:

Turn off the ignition with the key in the Off position. With the system turned off, click on the service button seven times, then set the key in the lock to the ACC position. The siren speaker will play seven beeps, this indicates successful entry into the binding mode.
Simultaneously click on the first and second pager keys. The siren speaker will play one sound pulse, and one melodic signal will be played by the remote control beepper.
The previous paragraph is repeated for programming each communicator. The time interval between binding each subsequent remote control should be no more than five seconds.
When the communicators are paired, you need to exit the programming mode. To do this, turn off the ignition. The car's lights should blink three times.

How to disable?

If you were able to turn on the security, but cannot turn it off using the key fob, you can disable the security mode using the service button. For emergency shutdown, the consumer must know the password.

Procedure for turning off the alarm:

The door lock is opened with a key, the alarm siren will start playing alarm pulses. If the protective mode was activated without using the communicator, the vehicle's lights will blink four times.
Activate the ignition by inserting the key into the lock and turning it to the ACC position. Click on the service key several times. The number of presses must correspond to the first digit of the code. If it is 8, then the key is pressed eight times. When using a unique password, the alarm will disable the protective mode and the lights will blink twice. If the password is two-digit, then after entering the first digit the ignition is turned off.
The ignition is turned on again. The second digit of the password is entered into the service key. If the code was entered correctly, the protective function will be deactivated and the lights will blink twice. If a three-digit password is used, the ignition is turned off.
The key is again set to the ACC position, and the third digit of the password is entered.

Malfunctions that may require emergency shutdown of the alarm are described in the Falcrums channel video.

Is there auto start?

Initially, the Starline A64 alarm system does not have the option of automatic engine start. But it can be implemented by installing an additional special module from Starline M21 or M31.

Installation of these devices can lead to the following consequences:

Starting the power unit will only be possible using a smartphone application, as well as by calling and sending messages. Using a standard communicator will not allow you to configure this function.
There may be nuances regarding engine blocking. The consumer may have to block the ignition zone with the M21 or M31 module. The same goes for restoring blocked electrical circuits. It is almost impossible to perform the correct setup yourself; you will have to contact qualified installers.
Locks performed by the Starline A64 anti-theft complex will be canceled using the TX cable, which is blue. It is possible that the firmware of the M31 module and the A64 microprocessor unit will be different. As a result, you can try to solve the problem by updating the software. However, this procedure may be meaningless due to hardware incompatibility.

StarLine A61 autostart module

For the StarLine A61 anti-theft complex, the M31 module is the only opportunity to acquire the auto-start option for the power plant. But this is not the only advantage of this device. Along with the desired function of setting up remote start, the car owner also gets the opportunity to:

turn off the windshield wipers using remote commands;
turn on and off remotely the heated seats or windows in the cabin;
simulate the functioning of an intelligent ignition switch;
program all the necessary engine parameters;
simulate a second starter signal in the event of an unsuccessful engine start during the first start.

One of the main advantages of the module is its versatility. It can be easily installed on any car model, no matter what type it is.

Malfunctions and ways to eliminate them

Problems that the consumer may encounter:

The alarm does not respond to commands sent. First of all, you need to diagnose the condition of the battery installed in the key fob. The battery is changed by removing the cover and removing the old power source. When replacing, observe polarity.
The signaling system reacts to sending commands every once in a while. The reason may be that the control button on your device is damaged or worn out. To solve the problem, you will have to disassemble the device case, clean it and replace the damaged button. To do this, you will need a soldering iron with a thin tip, as well as consumables (rosin and tin). If purchasing a new button is problematic, monitor the secondary market.
The range of the communicator has decreased. The problem may be that the battery is low. If the battery is working, you need to check the transceiver. Incorrect installation will result in reduced range. It may make sense to reinstall the device.
The alarm does not block all doors. The reason should be sought in the wires. Using a multimeter or voltmeter, the integrity of electrical circuits is diagnosed. If damaged wires are found, they must be replaced. If the cable insulation wears out, it is also recommended to change it. Before re-installation, we recommend additionally wrapping them with electrical tape, this will prevent rapid wear of the electrical circuits.
If the alarm does not work correctly, “glitches”, or turns on and off the protection mode for no reason, check the microprocessor unit. Malfunctions in the operation of the module may be due to the need to update the firmware or external influences. The latter include mechanical damage, regular vibrations, and moisture ingress. To solve problems, we recommend drying the module and checking its operation again. If the problems persist, you need to seek help from a specialist to reflash the device.

Features of car alarms

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Read also: Is it possible to make MTPL without PTS?

The car alarm is characterized by the presence of a shock-resistant control key fob, which allows you to control it at a certain distance. The device has a 128-channel noise-resistant transceiver, the operating range of which is 2000 meters. Thanks to the presence of a built-in integrated CAN interface in the car alarm, with the help of which the process of installing a car alarm is simplified and accelerated. The device can be installed in more than 300 vehicle models.

Typical malfunctions of car alarms

Starline A62

Malfunction	False positives
Possible reasons	Shock sensor is not configured properly The device is not securely fastened to the body
Methods for troubleshooting	The Starline A62 car alarm shock sensor is adjusted manually using the regulator on the body. The sensor must be firmly attached to the body, placing it approximately in the center.

Features of anti-theft functions

When using this device, you can connect a digital wireless locking relay. Thanks to the presence of a special connector, you can add a GSM/GPS module to the car alarm. If an alarm is connected to the device, the light will turn on when unauthorized access is attempted. Thanks to the presence of a special command in the a64 car alarm, you can easily control additional car door locks. With this device you can easily close the hood lock. If the need arises, you can additionally block the engine, thereby simulating its malfunction. When using this device, you can open the trunk if the standard alarm is disabled. Using a car alarm you are allowed to:

Control the preheater from a distance;
When the vehicle is moving, turn on the low beam headlights in automatic mode;
In automatic mode, install the seat for the car owner;
Return the steering column to its original position in automatic mode.

If the car owner turns on the security mode, the mirrors will fold automatically. The instructions will help you learn how a car alarm works. After the security mode is turned on, the light path lights up. Thanks to the security mode of this device, the hatch will turn on automatically. This car alarm model has excellent anti-theft functions, which allows the owner to be completely confident in its performance.

Standard and programmable car alarm functions

Car alarms have many functions, the main ones of which include:

The vehicle coordinates are determined thanks to the presence of a GPS-GLONASS telematics module.
This device is protected from various code grabbers thanks to the presence of an interactive control code that has individual encryption keys.
Despite the presence of a large amount of urban radio interference, the car alarm works perfectly. This provides a unique narrowband transceiver.
The fastest possible response to the processes of jacking and evacuation of the vehicle is achieved thanks to the presence of a 3D shock and tilt sensor in the device.
Full operation of the car alarm is ensured in the temperature range from -50 to +85 degrees. This is ensured by the high quality of the components of this device.
The a64 car alarm is battery operated. Thanks to the record energy efficiency of this device, the battery charge can be maintained for 60 days.
During the production of car alarms, patented advanced technologies and software solutions are used, which significantly improves the quality of its work.

Thanks to the built-in CAN telematics on the starline a64 car alarm, quick, simple and convenient installation of security systems on modern vehicles is ensured, and you can also control it from your phone. Using this function, a person will know about the operating features of the car alarm, since he will receive notifications on his mobile phone if there are changes. The communication channel of the starline a64 car alarm, the instructions for which are included in the kit, is controlled automatically. Using this function, the location of the key fob within the range of the transceiver is checked. The Starline car alarm key fob is characterized by the presence of a shock-resistant structure and ergonomic design, and an internal protected antenna. Thanks to the presence of flexible service channels in car alarms, control parameters can be programmed. The instructions will tell you how to set up a car alarm so that the seats work automatically, the mirrors fold, and the hazard warning lights work correctly. Hidden, silent operation of this equipment is ensured by the presence of power switches. They also protect absolutely all car alarm outputs from the possibility of an accidental short circuit.

Starline A66 is the most reliable security system in its category

Among the models considered, the A66 alarm system has an undeniable advantage. Its functionality is much more extensive, and its security system is an order of magnitude higher than that of the A64 and, especially, the older A62. We can say that this system is a modernized version of previous versions, combining the reliability of Starline security and the latest developments in the field of automotive security systems.

Despite the fact that the A66 car alarm is an inexpensive option, the actual degree of protection it provides is not inferior to higher-class models. The system is equipped with a tilt controller, as well as a two-level shock sensor. If desired, the alarm functionality can be expanded by adding GPS and GSM devices. The automatic start function is carried out when installing security equipment connected via Can-bus.

Manufacturing Features

The production of the Starline A64 car alarm is carried out from the highest quality materials, which provides it with a high degree of strength and reliability. This equipment is characterized by fairly small dimensions, which allows it to be installed in any convenient location of the vehicle. The Starline A64 car alarm is produced, the instructions for which are attached in accordance with international quality standards, which guarantees its long service life. A car alarm is characterized by the presence of a plastic sealed housing, which limits the possibility of dust, dirt, and moisture getting into the mechanism, and also protects it from a variety of negative environmental influences. The development of the starline a64 slave car alarm was carried out on the basis of engineering and technical innovations. Thanks to the presence of a special mode, the car is disarmed using its original key fob. The instructions will tell you how to set up the operation of the key fob for this equipment. The starline a64 car alarm is a universal device that will provide reliable protection of the car from unauthorized access. Thanks to the presence of a large number of functions, additional convenience is provided during operation.

Positive	Negative
I have had an a64 2can slave car alarm for 3 years now. There have been no glitches the whole time, nothing to complain about. I didn’t find any disadvantages, only advantages: reliability, high-quality communication (the response is always the first time), a large radius of operation of the key fob.	Definitely not worth the money. The usual two-way alarm system, nothing interesting. To enable at least autostart, you need to buy a special module, which is expensive. Why do this if you can buy it already with all the necessary functions and much cheaper.
The alarm has a dialogue code, which, according to the manufacturer, provides 100% protection against theft. I've had my Passat for over a year. It works great, the car hasn't been stolen yet. The controls are convenient, I especially like the large button on the remote control. The key fob itself is not very miniature, but it is comfortable in the hand, and it does not consume batteries as much as my previous alarm.	Not the most successful of Starline products. By paying a little extra, you can get the same A96 with a more advanced security system, a motion sensor and auto start. I can’t say that it works poorly, it’s just that the price does not correspond to the quality and functionality.

Positive	Negative
Works steadily. Very good reception radius, works even through several thick walls. We connected via CAN bus, the whole process took no more than 4 hours.	The price of the signal is clearly overpriced. Despite the fact that the kit does not include a GPS module with an antenna, you have to buy it separately. There are only 2 relays in the box, although this is clearly not enough for connection via the CAN bus. The instructions are written rather vaguely, there is no clear installation guide for CAN. It seems that manufacturers deliberately confuse people so that they contact their service center for installation.
Efficient and functional alarm system. Starline has never let me down yet. There were some problems, but this was due to a slightly “crooked” installation. Some functions were written incorrectly. It’s good that there are many service centers, I went to the nearest one and set everything up for a small amount.	Recently installed A66 on a 2014 Mazda. Among the shortcomings, I would like to note the inconvenient, large key fob and the rapid drainage of the battery when the alarm is working. I also don’t like some of the confusion in the controls; the old system was much simpler. Honestly, I expected better from Starline.

Malfunction	The central button on the key fob gets stuck
Possible reasons	Since the A64 has a large main button, with which all basic actions are performed, it bears a large load. Over time, the key begins to sink or respond poorly to pressing.
Methods for troubleshooting	To replace the button, you must contact an alarm repair center. Most services offer a replacement service. If the button is stuck, and there is no way to contact a specialist, you need to disassemble the key fob, clean it of dust and wash the contacts with alcohol.

Malfunction	Doors do not close when commanded from the remote control
Possible reasons	Blown fuse or loose central locking wiring Mechanical fault of central locking Oxidized door switches
Methods for troubleshooting	Soured and rusty buttons and limit switches are cleaned and lubricated with anti-corrosion lubricant. Fuses that have become unusable must be replaced, and loose contacts must be restored. If the lock still does not work, you need to replace this element with a new one