Starline autostart is the very function for which most car enthusiasts install this security and telematics complex. Regardless of the alarm model, it is quite simple and convenient.
But some configuration features must be taken into account based on the selected system option. We will tell you about the technical features of the most popular types of devices of the Russian brand, so that every car owner can use all the available features.
How to autostart from a key fob
In all modern Starline alarm systems, auto start from the key fob is included in the list of standard options. Therefore, there is no need to purchase and install additional mechanisms. It starts automatically using an intelligent system.
It connects the main unit of the security and telematics complex with the keys held by the owner. In this case, the device selects the frequency for communication independently, which does not allow attackers to intercept the signal.
You can start the car engine using the key fob in two modes: remotely before starting to move or automatically after a certain period of time or when the temperature of the power unit reaches a certain temperature.
The first method is relevant for those who prefer to get into a warm car and immediately go about their business. The second is used by car enthusiasts living in particularly harsh climatic conditions, when the internal combustion engine cannot be allowed to cool down for a long time, because it may not start back up.
Remote start for warming up before driving for all Starline models is activated by pressing button “1” on the key fob, and then button “3”. For periodic warming up, use the “2” button, but you need to set the operating mode in advance.
This is usually done by the installer during installation and preparation of the security complex for operation. So just check if the modes work on your car.
Important to note: Regardless of which alarm model is installed in your car, carefully read the instructions from the manufacturer before starting operation.
"Starline A93"
In terms of price-quality ratio, the A93 system is in the lead, which quickly gained popularity among domestic consumers. It is equipped with a siren, which you can read about in the instructions.
This is an alarm system with feedback and auto-start, which has 5 full modes, which are conveniently configured using a key fob.
The main device for use is a keychain with a little finger battery, which is enough for 1 year of operation. There are “open-close” and “move” buttons.
The alarm unit looks almost the same in all models. There is an antenna with a built-in tilt sensor. The kit includes a spare key fob without feedback that allows you to control the alarm. There is an emergency shutdown mode for the security function. The full warranty for the installation and operation of such an autostart on Starline is up to 3 years.
Duration of pressing key fob buttons
In addition to the question of which buttons to press to autostart Starline, new owners of the system are also concerned about the duration of this action. It depends on what model of alarm system is installed in your car.
In the first, that is, already slightly outdated, options, the algorithm looks like this: for three seconds you press the “1” button, and then, after the key fob makes a loud sound, make another short press of the “3” button. After this, the engine will automatically start in accordance with the settings.
On modern security and telematics systems, it is enough to press the first button for two to three seconds. After this, the device will make a loud sound, and autostart will start working. There is one more method, used much less frequently than the previous ones - activating the automatic start of the power unit using the icon on the key fob.
After the car receives a signal from the master key, the head unit makes the first attempt to start the engine. In normal weather conditions, with a working car, this will be enough.
But if the engine does not start, the security-telematics complex will make a new attempt, then a third or fourth. In this case, the starter operating time will increase by two fractions of a second each time.
Setting the sensitivity of the shock sensor
To adjust the sensitivity of the shock sensor of the Starline A91 system, you need to perform the following steps:
- disconnect the battery terminals (as an alternative, remove the fuse that controls the interior lighting);
- find the location where the shock sensor is attached (as a rule, it is located under the front panel, in the area of the steering column and pedals);
- disable the security mode, switch to programming mode and use the buttons on the remote control to make the necessary changes.
The sensitivity level has 10 values (0 – minimum, 10 – maximum). Factory settings assume 4-5 levels of protection. When adjusting the alarm sensitivity, you need to take into account the vehicle load level. The operation of the alarm should be considered correct if there are no false alarms.
After setting up the system, you need to wait 2-3 minutes, and then turn the alarm on and off several times to ensure its stable operation.
Systems A96, B96, E96, X96
Sixth generation security and telematics systems, which is what all of the listed models are called, are distinguished by an innovative method of identifying the owner compared to other types of alarms.
To do this, use a smartphone or smart watch and a Bluetooth Smart channel. This combination guarantees minimal energy consumption, which means the service life of the batteries in the key fob is increased.
On the key fob of any of the listed security systems you will find four keys. To start the power unit, you must press button “1” for a long time, and to stop, press button “2” for the same long time.
In this case, each time you will hear a loud, thin sound, which will indicate that the command has reached the car's head unit.
The remaining keys are used when it is necessary to put the machine into service mode. Their combination is specified in the operating instructions. We do not recommend changing the settings yourself without knowing what it will lead to.
Important to note: If your car has a manual transmission, before using the Starline alarm with remote start, make sure to put the gear in neutral and apply the handbrake.
Common problems with the Starline alarm system and solutions
The owner of a brand new vehicle, straight from the assembly line of a car factory, strives to install the most advanced alarm system. For various reasons, the car owner is faced with the fact that the autostart on the car’s security system does not work. For example, during the autostart process, the engine does not start or starts running and immediately stalls. The solution to the problem is as follows:
- it is necessary to install a factory immobilizer bypass module;
- check the location of the key (transponder) in the bypass module;
- correctly connect the wire for monitoring the functioning of the motor.
Vehicle with manual transmission – auto start has stopped working (the engine does not start after 4 attempts). The reason for the failure is that the selected connection algorithm does not work. We fix it in the following ways:
- start the engine and raise the handbrake lever;
- with the engine running, remove the key from the ignition switch;
- open and close the door on the driver's side (the other doors of the car must be closed), set the security system.
Simultaneously with the activation of the security system, the car engine stops working, and two icons appear on the LCD screen of the key fob - “lock” and “siren”.
Systems A93, E90*, A94*, B94*, D94*, E95, A95, B95, D95
Some of these models are already considered obsolete. They have been discontinued, which means that service for them has also been reduced. But security and telematic systems remain popular among ordinary people, including for automatic engine start.
To start the power unit or extend its operation for a while, you need to press the “1” key for a long time until the key fob emits two beeps.
You can stop the motor by pressing the same first button, and then the fourth. Yes, these alarm options use more switches for everyday use.
It is important to note: Security systems marked in the title with an asterisk are still being produced. The action protocol for outdated models released before 2015 is the same as described in the text. For younger ones, the same guidelines apply as for models A92, B92, T94.
Owner reviews
I drive a VAZ 2107. I chose the alarm based on price, as well as the presence of additional qualities. I don’t think that VAZs are being stolen from anyone now, so the main emphasis was on the convenience of the alarm. The choice fell on Starline B9, which, in addition to security functions (very good, by the way), can also boast additional autostart options and a decent price. The alarm has been on the car for a year now – no glitches and working properly, so I’m happy.
I’ll say right away - I bought it at the price of Starline B9. As for me, 4 thousand for a budget alarm system, but with good options, is quite good. It was recommended by a neighbor in the garage who uses it all the time, and especially praised the turbo timer, so I took it. It won't hurt me on diesel either. So far, the system has been working properly for six months, although I was a little afraid that I had screwed it up, because I installed it myself, and for me this was my first experience. But no complaints. The only drawback is poor sensitivity to the signal from the key fob. Already from the balcony of the 9th floor the car is not reachable, which is inconvenient. But the rest is all good.
Systems A92, B92, T94
Now let's look at how to enable autostart on a Starline alarm system if one of the models of this generation is installed. To start and stop the power unit in this case, use the following key combination:
- To start the engine, press “1” and “3” in sequence.
- To shut down the engine – “1” and “4”.
In this case, the first press should always be long (2-3 seconds), and the second – short. The first button must be released before pressing the second, otherwise the head unit will receive a different signal and will not be able to automatically start.
It is important to note: During autostart, the security complex independently turns off the wipers and car radio, but at the same time starts heated seats.
Causes of problems
If the car does not turn off when you press the remote control button, you need to check the condition of the battery. The problem occurs when electronic components are damaged or when using a key fob that is not registered in the complex’s memory. Identical problems occur when operating Starline A91 equipment, which has a similar design. A backup remote control is used to stop the engine. It is allowed to open a running car with a standard key; the security is disabled by entering an emergency code (without a remote control).
If the car starts up and then stalls after some time, then the functionality and accuracy of the temperature sensor readings located under the hood of the car are checked. To check the operation of the automatic start, you need to program the operation algorithm using a timer, or start the motor remotely using the remote control. If the engine stalls, then the correct installation and configuration of the complex elements is checked.
If the user plans to start and stop the power plant using a mobile application, then it is necessary to control the account balance. If there is no money, the operator blocks the forwarding of messages. In this case, the owner must either use a backup number or a standard Starline A91 or A93 alarm remote control.
Systems A91, B9, C9
This is the latest, and therefore the smartest generation of car alarms from the Starline brand with automatic start of the power unit from the key fob. In addition to standard functions, these systems boast protection against intelligent hacking, an improved transceiver and luxurious equipment.
As for the autorun option, it is turned on by a combination of keys “1” and “3”, and disabled by successively pressing the buttons “2” and “3”. The duration is the same. First a long press and then a short press.
It is important to note: Security systems of this type are suitable for cars with a “Start-Stop” button. But to install them, you should contact specialists, because incorrect operation can lead to problems with the operation of the machine.
Results
When the cold weather comes, many drivers are interested in turning on a system such as remote auto engine start or starting in accordance with temperature indicators.
Starline alarms can cope with this function, provided that such a system is properly installed and configured.
For many motorists, information regarding enabling and configuring autostart for their vehicle is not available. There are several reasons for this - a new or leased car.
After reading the article, you can easily ensure that the engine autostart is turned on using the Starline alarm system.
One of the most popular driving mistakes is ignoring the mandatory recommendations that will be required to turn on auto start and close the door of a switched off car manually using the key fob. Now car enthusiasts will be able to take advantage of the knowledge about the procedure for autostarting the Starline A91. The question of how to make autostart on Starline will not be a mystery to them.
Car owners have long appreciated the StarLine alarm system. Its purpose is vehicle safety. To take advantage of all the functions of this system, you need to configure the Starline key fob.
There are instructions for this, following which you can successfully debug all alarm operating modes.
StarLine alarm operating modes
There are several alarm operating modes. Starline can be configured in the system for various operating modes.
- Anti-robbery mode. Protects against unauthorized persons entering the car.
- Immobilizer. Blocks the engine when attempting to steal.
- Self-diagnosis of all systems. Activating this feature allows you to see problems in different work areas. They will be shown on the pager.
- Panic mode. The turning lights turn on and the siren emits several loud beeps.
- Security mode. The main operating mode, when turned on, all doors and the engine are blocked.
- Silent security function. When an outsider tries to break into the car, the owner receives a message on the key fob. But the siren does not turn on. The function is available with the engine on and off.
- Automatic activation of the security mode after it is turned off.
Systems A8, A9
These security and telematic systems are distinguished by broader functionality, including automatic engine start. To start the engine, just press button “1” for a long time. The car is turned off in the same way and is automatically armed.
If you do not want to activate the protection after turning off the power unit, press the “1” key again, but briefly.
Such a sequential action will transmit a command to the head unit to disarm the system. Just do not leave the vehicle in this mode unattended for a long time if you do not want to give criminals free access to it.
Gain function
Starline has additional A95 security equipment, which is equipped with a wireless locking relay, buzzer and tags. This is a full-fledged security device that blocks one of the car’s circuits. Without a tag in the cabin, the car will not go anywhere.
Depending on the car model, different tags can be installed. You can wear them in documents. If you forget the tag at home, the car will begin to warn you about this with a sound signal. The system will always search for the tag.
There are several modes of using such a device:
- When the tag search is always carried out.
- For a one-time tag search when disarming for the first time. The tag will no longer be searched.
- Service mode, when even during the repair process at the service center it will not be noticeable that a mobilizer is installed.
In addition to the mobilizer, you can also install a hood lock from Starline. Such an electromechanical device works in parallel with the mobilizer, preventing the lock from being unlocked without the owner’s permission.
A full-fledged security complex consists of:
- security system;
- mobilizer;
- hood lock.
You can also use search beacons M15 and M17 from Starline. M15 is an autonomous beacon, a search device that helps find a missing vehicle. Serves for monitoring to track the speed and direction of the vehicle on the map.
