Hi all. The question arose about replacing the timing belt and pump, so I went shopping. I took the timing belt from Dayco, there are no questions about it. But I would like to hear about the pump. The choice was between TZA and Luzar Turbo, the seller advised Luzar. The seller is normal, I always buy from him, he doesn’t recommend crap. But I would like to hear real reviews, has anyone installed such a pump? How is she even in business?
Comments 38
I installed a regular pump, not a turbo. The gasket from the box along the mounting holes does not match the pump, and the pump holes do not match the engine holes. I had to drill the pump with an 8mm drill to get it to fit. Result: crooked pump for 1k. Turbo is generally 1300. What can I say, the Chinese...
Well, how do you like this pump? What can you say?
Pump is like a pump, drove 14 thousand, no complaints. As they write about it, like improved performance, but I didn’t notice anything like that. Before this, the TZA was installed, I didn’t feel the difference between them)
That's it, thank you all for the feedback, I heard what I wanted to hear)
The HEPU number is the same as for a 10 with a 21124 engine, they run without problems. The fact that the different profile of the timing belt teeth does not affect the speed.
Guys, why are you writing about Hepa and Pilengi? I asked specifically about Luzar, I’m not interested in the rest)
In general, I installed Pilenga - 50 thousand without complaints)
I put the luzar. Drove 35 thousand. Still alright
Normal pump. No complaints!
Loser! You can't call a good pump that way :)
the pump is normal, whoever installed it, everyone is happy, the circulation increases, I’ve been driving this one for 3 years
I put on the usual luzar, I liked it! A friend of Luzar also already has 30 thousand. It's worth it, everything is fine!
Put it later and write about the speed of departure. And the impressions are no worse back to the store.
Install a normal pump. I thought it was leaking on me, but it turned out that because I decided to show off and installed it without a gasket, it leaked due to the lack of a gasket. I installed the Hepu I had already purchased as a replacement. Luzar turbo is in stock. It pumps more antifreeze at idle than the Hepu.
The last car had only advantages. With active driving, the car costs at 90, probably even a little less than 85. When driving quietly, I didn’t notice any difference as standard, except in winter, the heater is warmer in winter.
Sometimes it seems to me that it’s not AvtoVAZ that spoils our cars, but third-party spare parts and garage technicians. The car leaves the factory for a long time, when it’s time to change spare parts, the search begins, what’s better? And the fact that the original was sold for under 100,000 or even longer is apparently not an indicator...
Sometimes it seems to me that it’s not AvtoVAZ that spoils our cars, but third-party spare parts and garage technicians. The car leaves the factory for a long time, when it’s time to change spare parts, the search begins, what’s better? And the fact that the original was sold for under 100,000 or even longer is apparently not an indicator...
Delivery by Russian Post (cash on delivery, no prepayment)
Advantages: the most widespread network in Russia, delivers to any corner of the country, including remote ones. Flaws:
- high cost of delivery of heavy or large parcels, as well as the weight of one parcel should not exceed 20 kg;
- long delivery times and queues in large cities for receipt.
To send your order by Russian Post:
- Place an order in our online store by phone or on the website (registration is not necessary);
- After we receive it, our manager will contact you by phone to clarify the cost, delivery time and your wishes. Next, we will pack your order carefully and then send it to you;
- You will receive the tracking number of the shipment via SMS from us and from the Russian Post; the message will indicate the full cost of the purchase, including delivery to your locality (that is, the cost of your order plus the cost of delivery by cash on delivery). You can control the status of the order coming to you using our tracking service, as well as independently, on the Russian Post website using the track number;
- To the Post Office, you will only have to pay the cost, including delivery.
Delivery time may vary depending on how far your locality is from Togliatti and usually ranges from 5 to 14 days.
The cost of delivery is calculated based on the volume, weight of the selected product and the distance to the recipient's settlement.
Required for sending:
- indicate full name recipient;
- Your mailing address;
- Your phone number (contact);
- Post office code.
Russian Post commission for cash on delivery service:
- purchase price up to 1,000 rubles. – 70 rubles + 5% of the amount;
- purchase price from 1,000 to 5,000 rubles. – 80 rubles + 4% of the amount;
- purchase price from 5,000 to 20,000 rubles. – 180 rubles + 2% of the amount;
- purchase price from 20,000 to 500,000 rubles. – 280 rubles + 1.5% of the amount.
Russian Post - Delivery of goods up to 20 kg throughout Russia. https://www.pochta.ru
Delivery time and cost Track the parcel Calculate delivery by mail
How is the pump replaced on a Priora?
Replacing the Priora water pump. Warning! Do not turn the crankshaft or camshaft after the camshaft drive belt has been removed, otherwise the piston may hit the valves. Wear of the pump bearing (indicated by increased noise during operation) and leakage of coolant from the pump are the main defects of the water pump.
As a rule, repairing the water pump does not lead to the desired result, so it is recommended to replace the pump assembly. Replacing the pump is a procedure for performing actions that you can do yourself.
| STEP # |
Description
Delivery by transport company (cash on delivery, no prepayment)
Advantages:
- the cost of delivery of heavy and large-sized orders is much cheaper than that of Russian Post;
- There are practically no restrictions on the weight and dimensions of cargo;
- There is a wooden crate service - this is an additional guarantee of the integrity of the order.
Disadvantages: unfortunately, there are branches only in cities.
The estimated cost of delivery for an order up to 30 kg is 450 rubles.
List of transport companies with which we cooperate:
- TC "PEK" (cash on delivery service available);
- TC "Business Lines";
- TC "Energia";
- TC "KASHALOT" (KIT) (cash on delivery service available);
- TC "SDEK" (cash on delivery service available);
- TC "DPD";
- TC "ZhelDorExpedition";
- TC "VOZOVOZ";
- TC "Baikal-Service".
To send your order by transport company:
- Place an order in our online store by phone or on the website (registration is not necessary);
- After we receive it, our manager will contact you by phone to clarify the cost, delivery time and your wishes. Next, we will pack your order carefully and then send it to you;
- You will receive a shipment tracking number from us via SMS or email (if available). You can monitor the status of the order coming to you using our tracking service, as well as independently, on the transport company’s website using the track number. After the order reaches your locality and the manager of the transport company contacts you, you need to receive the order at their office or order home delivery;
- Upon receipt from the transport company, you pay the cost of delivery and order.
The cost of delivery is calculated based on the volume, weight of the selected product and the distance from the city of Tolyatti.
To send an order you must:
- indicate full name recipient;
- Your locality and region;
- series, number of passport or driver's license;
- Your phone number (contact).
TC "Business Lines" - Urgent delivery of goods from 1 kg throughout Russia. The exact cost can be found on the official website of the delivery service - https://www.dellin.ru
Delivery time and cost Track the parcel View the list of branches
TC "PEK" - Guaranteed safety of cargo for the entire duration of cargo transportation, clear information support, delivery of goods throughout almost the entire territory of Russia, Belarus and Kazakhstan in optimal terms and accurately calculated cost of services. The exact cost can be found on the official website of the delivery service https://pecom.ru/ru/calc
Delivery time and cost Track the parcel View the list of branches
TC "SDEK" - Low tariffs compared to foreign courier companies, while the quality of the services provided meets modern international logistics requirements. Developed network of own representative offices. The exact cost can be found on the official website of the delivery service https://www.cdek.ru/calculator.html
Delivery time and cost Track the parcel View the list of branches
TC "ZhelDorExpedition" - Serves only large cities and towns. The exact cost can be found on the official website of the delivery service - https://www.jde.ru/branch
Delivery time and cost Track the parcel View the list of branches
TC "Energia" - Cargo transportation in Russia, CIS and China. The exact cost can be found on the official website of the delivery service https://nrg-tk.ru
Delivery time and cost Track the parcel View the list of branches
TC "KASHALOT" (KIT) - Delivery of cargo from 1 kg to 20 tons throughout Russia and Kazakhstan. The exact cost can be found on the official website of the delivery service https://tk-kit.ru/calculate
Delivery time and cost Track the parcel View the list of branches
TC "Baikal-Service" - Transportation and delivery of consolidated cargo by road across Russia. The exact cost can be found on the official website of the delivery service https://www.baikalsr.ru
Delivery time and cost Track the parcel View the list of branches
TC "DPD" - Transportation and delivery of groupage cargo by road in Russia. The exact cost can be found on the official website of the delivery service https://www.dpd.ru
Delivery time and cost Track the parcel View the list of branches
TC "VOZOVOZ" - Transportation of groupage cargo by regular delivery routes between Russian cities. The exact cost can be found on the official website of the delivery service https://vozovoz.ru
Delivery time and cost Track the parcel View the list of branches
Water pump LUZAR TURBO VAZ 16V Kalina, Priora, Granta, Vesta, X-Ray, Largus
Water pump “LUZAR” TURBO.
APPLICABILITY: VAZ 1117, 1118, 1119 (Lada Kalina with VAZ 11194 1.4L 16V or VAZ 21126 1.6L 16V engine), VAZ 2170, 2171, 2172 (Lada Priora 1.6L 16V), VAZ 2190, 2191 ( Lada-Granta 1.6L 16V), VAZ 2192, 2194 (Lada Kalina 2 1.6L 16V), LADA Vesta (LADA Vesta 1.6/1.8L 16V), LADA X-Ray (LADA X-Ray 1.6/1.8L 16V), LADA Largus ( LADA Largus with VAZ 21129 1.6L 16V engine).
Flaw in the design of VAZ engines.
Many owners of front-wheel drive
VAZ are aware of this problem, especially when stuck in traffic jams.
A sudden boil usually occurs according to the following scenario - the car is driving at speed, then suddenly stops during a traffic jam, it is at this moment that the engine usually begins to boil. Why is this happening? When driving, the engine is heat-loaded - the pump operates at high speeds and provides a decent flow of coolant through the engine block head. During a sudden stop, the pump speed drops sharply, and along with it, the fluid flow rate drops sharply, while the engine still has thermal inertia - its parts are still hot. Therefore, the liquid simply boils in the block head. Development of the TURBO water pump.
While testing various materials used in the production of water pumps, we discovered a new, more advanced, more technologically advanced material called “ceramic plastic”
and which has the prospect of being used
as a material for impellers
.
Polyphenylene Sulfide PPS (PPS)
- a semicrystalline material consisting of alternating units of sulfur atoms and phenylene rings.
It is a high-tech material from the category of so-called superstructural thermoplastics
.
This material was used specifically in the TURBO project, within the framework of which a new impeller for VAZ water pumps was developed
.
The efficiency of the TURBO impeller.
The process of preparing the production of water pumps "LUZAR" TURBO
was not easy.
During development - taking into account existing technological capabilities - it was decided to simplify the design of the impeller. Despite these simplifications caused by the imperfections of today's technologies, we were able to achieve enormous advantages compared to the “standard”
pump and compared
to the pump (model 1)
.
Thus, the “LUZAR” TURBO
“LUZAR” impeller at idle speed by more than 50%
with a gradual reduction as the speed increases and the flow level is equal to 3000 engine revolutions.
Thus, the problem of increasing fluid circulation in the most difficult conditions is solved - in traffic jams and during a sudden release of gas
.
"LUZAR" "Lugansk Automobile Radiator Plant"
produces a variety of water pumps (pumps) for both passenger cars and commercial vehicles and trucks.
The LUZAR
product range includes more than 100 pump models for both domestic and imported cars. There is a continuous development of new water pumps for everyone for popular cars.
Water pumps circulate coolant in automobile engines, ensure the removal of excessive heat from the cylinder block and the supply of hot fluid to the interior heater radiator. Suitable for all automobile engines with a water cooling system. Water pumps are not used in air-cooled engines.
The performance of the water pump is proportional to the speed of rotation of the crankshaft. This is due to the fact that the water pump is driven directly from the crankshaft - thus, as engine speed increases, the circulation of coolant also increases.
The water pump must solve several problems:
— ensure a more uniform temperature in different parts of the cooling system;
— smooth out sharp temperature fluctuations (eliminates the “thermal shock effect” with a sharp change in engine speed;
— deliver the coolant to the heater radiator, ensuring heating of the interior.
Design of LUZAR water pumps.
The water pump (pump) consists of a housing in which a bearing with a shaft is located. A drive pulley is pressed into place at one end of the shaft, and an impeller (impeller) at the other. On the impeller side of the shaft there is a sealing element (oil seal) that protects the bearing from liquid ingress.
Frame
. Two types of materials are widely used - cast iron and aluminum. Aluminum is a more modern material and allows you to create housings of complex shapes with strict adherence to dimensions, which makes it possible to install a bearing under tension. Cast iron pump casings are used, as a rule, on heavy-duty vehicles - where the engine speed is low, but a long service life of the part is required.
Bearing. Typically, two radial bearings are used, between which grease is placed. Outdated design - two open-type ball bearings are located separately on one shaft and are secured against rotation with screws. It is possible to additionally press grease between the bearings; for this purpose, a grease nipple is located on the pump body. Modern design used in LUZAR
– double-row ball or ball-roller bearing of a closed type, rigidly pressed into the pump body. This bearing uses high-temperature grease, which does not require replacement for the entire service life of the bearing and pump.
Pulley. Made from steel. The pump can be equipped with either a toothed or a V-pulley. In some cases, the pulley is not included in the water pump and is attached additionally. The transmission of torque and the service life of the drive belt depend on the accuracy of the pulley dimensions.
Impeller. It is the main “actuator” of the water pump, responsible for its performance. Read more about the impeller on the last page of the brochure.
Sealing element (oil seal). Designed to seal the bearing and protect it from liquid ingress. It is the most important part of a water pump - due to the “dynamic nature” of the pump’s operation, the sealing element is constantly under heavy load.
Advantages of LUZAR water pumps:
Double row ball roller bearing.
In LUZAR
the best bearing of all possible options is installed.
A double-row radial ball-roller bearing of a one-piece (closed) type is used, which does not require maintenance throughout the entire period of operation. This bearing is high-speed, highly loaded and provides maximum operating conditions. On some pumps, due to the insufficient height of the housing, ball roller bearings cannot be used. In this case, double-row radial ball bearings of the one-piece type are used. Metal-ceramic sealing element.
To seal the moving housing-shaft connection, a double mechanical seal is used, in which the moving and stationary rings are made of ceramic. Due to the special properties of ceramics, friction between the rings is minimal, there is practically no air gap - thereby guaranteeing high tightness and long service life.
The patented method for installing the oil seal is additional sealing of the oil seal-shaft and oil seal-housing interfaces.
According to the results of numerous studies
(the data set contains more than 5,000 observations) it turned out that about 20% of pump bearing failures occur due to the penetration of coolant bypassing the oil seal at the oil seal-shaft and oil seal-housing interfaces.
This phenomenon occurs due to microscopic pores in the casting of the pump body and “loosening” of the sealing element during operation. The solution is adhesive sealing of the sealing element of LUZAR
, which led to a significant increase in the service life of the products.
100% ultrasonic body inspection.
Microscopic defects in the pump body casting can lead to loss of operational (resource) characteristics of the water pump. In this regard, we carry out quality control of the casting of pump housings, guaranteeing excellent mating of parts.
100% control of impeller overhang.
It is known from the hydraulics course that the closer the impeller is to the response part of the water pump, the greater the pump performance (in an inverse cubic relationship - as the distance to the response part decreases, the flow rate increases in cube). LUZAR water pumps
have a guaranteed gap
of 0.9-1.3 mm
, controlled during production. Note: There are often cases of deposits on the pump body. Such deposits may prevent installation of the pump. In this case, it is necessary to either carefully clean out these deposits, or use an additional gasket when installing the pump.
Complete with installation fasteners.
The water pump is operated in an aggressive environment. In this case, the pump fasteners become covered with salt corrosive deposits and become unusable. That's why all LUZAR
are additionally equipped with installation fasteners, which must be used when replacing the pump.
Warranty 2 years or 125,000 km.
All products are certified according to the international quality management system ISO 9001 TUV and have GOST-R certificates of conformity.
Includes: water pump, gasket, 3 bolts and 3 washers.
You can make payment in one of the ways convenient for you:
- To a SberBank or Alfa-Bank card. The most profitable method for the buyer, as well as the most convenient one, is to use the Sberbank Online service, Alfa-Click, an ATM, or through an operator at the bank. After placing your order, the manager will send you the card details. If you do not have a SberBank or Alfa-Bank card, you can also top up your card using the details at any SberBank or Alfa-Bank branch. Payment is credited within an hour.
- Yandex money. Customers who have Yandex.Wallet can quickly and easily pay for an order in our online store, the commission will be 0%.
- Yandex.Checkout is an online payment acceptance service. A convenient option with a large selection of payment methods for your order: plastic cards of any banks, including credit cards, in cash through terminals, ATMs or phone shops, Qiwi Wallet, Yandex.Money, WebMoney, from your phone balance, purchase on credit (payment in installments) . Please carefully check which email address you provided during the ordering process, as you will receive a receipt for payment for your order. Yandex.Checkout commission for transfer will range from 3% to 6% .
- QIWI wallet. If it is more convenient for the client to use a QIWI wallet or, if it is not available, to pay through the nearest QIWI terminal, the manager will provide you with the wallet number. Commission 0%.
- Payment at any bank using an invoice or receipt (+3% to the cost). If you do not use electronic wallets and plastic cards, we provide the opportunity to make payments at any bank in Russia. The site manager will send you a pre-filled receipt “Form No. PD-4” by e-mail; please carefully check the e-mail address you provide. The bank commission will be approximately 3% and depends on the bank itself
- Cash on delivery upon delivery by the Transport Company (payment for purchase upon receipt of the order).
- Cash on delivery upon delivery by Russian Post (payment for purchase upon receipt of the order). The order arrives at the post office, after which you pay its cost and pick it up, in which case the Russian Post charges a commission.
Malfunctions
Water pump for car
The causes of failure can be different, for example, bearing jamming or the formation of play. Sometimes it happens that the impeller begins to spin freely, but separately from the shaft. The pump also needs to be replaced if it leaks or becomes noisy.
Life time. A lot depends on the quality of the pump. For example, a low-quality and defective pump can last only 10-15 thousand km. The service life of a high-quality part is when the Priora runs 100 thousand km. and more.
The manufacturer installs a pump on the Priora, produced by the Russian enterprise Togliatti Automotive Units Plant (TZA). It has a long service life.
Unfortunately, recently sales of counterfeit pumps from TZA have become more frequent. Is it possible to distinguish a fake so that your Priora does not suffer?
A high-quality box should contain a pump, inside the box there should be a warranty card with stamps and the date of manufacture and a gasket. It is mandatory to have a holographic sticker on the pump.
