No instrument panel backlight VAZ 2110 injector 8 valves description

Problems with the backlight of the VAZ-2110 dashboard: causes and repairs

It’s probably no secret to anyone that the reliability of VAZ “ten” leaves much to be desired. Often, the owners of these cars have to deal with certain malfunctions. One of these problems is the lack of dashboard lighting. It is clear that the breakdown should be corrected as soon as possible. After all, going somewhere at night will be quite problematic - few people will like to move, essentially, blindly, without seeing either the current speed or other, no less important indicators.

Replacing light bulbs in the instrument cluster of VAZ-2113, 2114, 2115

Today we will talk about such a common problem as the failure of the dashboard lamps on the VAZ-2114. The VAZ-2114 model is good in many ways, it is aesthetically pleasing and dynamic, has good technical characteristics, but the dashboard leaves much to be desired in terms of quality and reliability. We will tell you how to replace panel lamps in this article.

Dashboard lamps

The dashboard provides the driver with a lot of useful information that allows him to monitor the condition of the car, the driving process, diagnose breakdowns in a timely manner and correct them. So, the panel light comes on for the following reasons:

• The battery is not charging.
• For one reason or another, the handbrake is stuck.
• Not enough fuel in the tank.
• The oil pressure has decreased (which indicates the need to urgently stop the engine to avoid more serious consequences).
• Excess water in the filter. To prevent water from entering the pump, which could lead to damage, you need to drain excess water from the filter.
• The fuel system is malfunctioning.
• There was a failure in the propulsion system and much more.

As you can see, the panel lamps allow you to determine what is wrong in the car; if the lamps themselves fail, then you can miss a very important breakdown, which can even lead to an accident. This is why it is so important not to delay replacement (the lamps cannot be repaired).

Today, the car market offers a wide range of lamps for the control panel, ranging from the standard version, which is cheaper but also has average characteristics, to modernized versions that give the panel, and therefore the entire atmosphere of the car, a different, more expressive atmosphere.

Professionals also advise replacing standard lamps with LEDs, which largely decorate the panel.

So, we list several of the currently most popular options suitable for the VAZ 2114.

• LED lamps Sho-Me SM-T5 (blue, white and red). Country of origin: Korea, price: 80 rubles. for a couple.
• High-brightness SMD LED module – 20 rubles.
• LED Sho-me SM-T5-cap-super (white) – 50 rub.
• Halogen lamps from Osram and Philips cost approximately 40-80 rubles apiece.

Possible reasons

What to do in a situation where the instrument panel backlight on a VAZ-2110 car has disappeared? First of all, you should look for the reason why this malfunction occurred. Sometimes it can be identified immediately, but in some cases this process takes some time. In fact, there may be several reasons, so you will need to check everything methodically.

The most banal and simplest option is that someone turned the rheostat knob, which is responsible for the amount of light flux, all the way to the left.

This, by the way, is often the sin of children who are placed in the front seat. “Young drivers” love to turn all sorts of knobs, press buttons and switch levers. Perhaps the adults overlooked it, and the child “corrected” the dashboard lighting. The problem, as you understand, is solved by simply returning the rheostat knob to its previous position. Therefore, before you start looking for possible reasons for the sudden disappearance of the backlight, check this particular point.

I would like to remind you of one simple rule. In a situation where there may be several possible causes of failure, when searching you need to follow the path of least resistance. In other words, test the simplest assumptions first. You may be lucky and find the problem with minimal time and effort.

If the reason is not in the position of the rheostat handle, you need to proceed to further search for the causes of the breakdown. Possible sources of problems here could be:

• fuse;
• instrument panel circuit board;
• contacts;
• wiring;
• failure of light bulbs due to short circuit.

So, let's look at some of the above reasons in more detail. After the rheostat handle, you should check the integrity of the 5-amp fuse F1. You can also usually turn on the side lights and see if they work on the left side. Everything is explained here simply. The lamps that illuminate the instrument panel, the left side lights, as well as the trunk lighting operate through this fuse. The dimensions located on the right side of the car receive power through F11, that is, they are not of interest to us in this particular case.

You may see the following situation. The left side parking lights, or trunk light, work, but the instrument panel light does not. This means that the problem is not in fuse F1. Therefore, you need to continue searching for the possible cause of the malfunction. In particular, it is necessary to check the contacts of the rheostat that illuminates the dashboard lighting. It is not uncommon for plugs to fall off. Accordingly, the lighting of the shield disappears due to lack of contact.

However, the rheostat itself can also fail. It is quite easy to check this assumption. To do this, you must first remove the rheostat, and then directly connect its contacts. If after this manipulation the instrument panel lights come to life, it means that the problem has been found, and you just need to replace the failed part. If not, then you need to continue searching further.

The most serious problem due to which the instrument panel lighting disappears is damage to the printed circuit board of the dashboard itself. In particular, there are often situations when the track on it that supplies power to the lamps burns out. One point worth noting here. The instrument panel in such a situation cannot be repaired, which means there is only one way out - replacement with a new one.

There are cases when, due to a short circuit, all the lamps illuminating the instrument panel burn out. However, this happens quite rarely. Much more often, one lamp may fail. As you can see, there are several reasons why the instrument panel lighting may disappear. Accordingly, the search will take some time. However, in the vast majority of cases, eliminating the malfunction that has arisen will not be so difficult, and many people can easily do this with their own hands.

Source

Simple and fast upgrade

In principle, with your own hands you can either completely replace instrument panel of a VAZ 2110 or tuning the existing one.

One of the quite popular options is replacing light bulbs with LEDs. Moreover, there is no difficulty in this - you need to remove the light bulbs and insert LEDs in their place.

However, there is one small trick: they work well only if the polarity is observed! If the LED does not light up immediately when connected, you need to remove it, turn it 180 degrees, then reinsert it into the socket.

Even such a simple replacement will increase the brightness of the dashboard , but this is not enough, it is hardly worth completing the tuning with your own hands.

READ Replacing Light Bulbs in Renault Logan Buttons

No instrument panel backlight VAZ 2110 injector 8 valves description

• To the beginning of the forum
• Forum Rules
• Old design
• FAQ
• Search
• Users

Yesterday evening I started the engine. and discovered that the dashboard backlight (mechanical) had disappeared. All indicators work fine

, in general, everything is as usual,
only there is no backlight
. Manipulating the brightness control had no effect. Today I had very little time, I thought about replacing the backlight bulbs (although I didn’t understand how 3 of them could burn out at once). It turned out that they were all intact, but they were supplied with 0.3 V. :ooo: For several days there will be no opportunity to go to the service station. Has anyone encountered something similar and can suggest the most likely causes and ways to identify (eliminate) them?

Replacing warning lamps in the instrument panel

In many cars, including the VAZ 2110, warning lamps A12?1,2 are used in the instrument cluster. When replacing the lamp, do the following:

The socket together with the burnt out lamp should be turned counterclockwise all the way.

Remove the lamp socket from the instrument system.

A new lamp is installed in place of the burned out one in the reverse order. All other instrument cluster lamps are replaced using the same method.

The importance of every light bulb

If one of the lamps does break, it should be replaced as soon as possible. The thing is that each light bulb signals one or another malfunction. If one of them is broken, the driver will not be able to know that, for example, he is running out of fuel. This can lead to quite unpleasant consequences.

It also happens that the light indicates a malfunction in the fuel system. This is a fairly serious problem, so it needs to be addressed urgently.

What are dashboard lights for?

VAZ 2114 is one of the highest quality, dynamic and beautiful models of the domestic automobile industry, with excellent technical characteristics. However, it also has its drawbacks, one of which is the dashboard, which is not particularly reliable and of high quality. A common problem with the dashboard is the rapid failure of the backlight lamps.

Working illumination of the dashboard of a VAZ 2114 car

The backlight bulbs provide the driver with various information that allows them to monitor the condition of the car and diagnose possible malfunctions in a timely manner. There may be several reasons for their operation:

• the battery is discharged;
• holding the handbrake;
• lack of fuel in the gas tank;
• a decrease in engine oil pressure is a reason that requires stopping the car to avoid engine damage;
• accumulation of water in the filter. Excess liquid is drained to prevent it from entering the pump;
• malfunctions in the fuel system;
• engine malfunctions.

Failure of instrument panel lamps may cause the driver to miss a breakdown or malfunction that could cause an accident. For this reason, you should not delay replacing light bulbs.

Features of the functioning of light bulbs on the dashboard

The VAZ dashboard is needed to inform the car enthusiast about any processes occurring in the car. This means that using the dashboard you can monitor the status of the car, as well as monitor your driving. In addition, it is the dashboard that is needed in order to diagnose certain malfunctions. All this means that the lights on the panel do not light up just like that, but for some specific reason.

One of the most common causes of light bulb failure is prolonged use. Another reason is problems with contacts. Almost any car part requires replacement after a certain period of time. Light bulbs are no exception. And some problems may require the help of an electrician.

Features of replacing a light bulb in the instrument panel of a VAZ 2114

There are 13 lamps in the dashboard, but not all of them can be replaced. Unfortunately, only 8 bulbs can be replaced.

Before you begin the process of replacing the lamp, you need to clean the contacts in case there are any traces of oxidation on them. Sometimes it is not the lamp that needs to be changed, but only its socket.

Before you buy new lamps for the panel, you need to calculate the total number of devices that are needed for the sensors.

Don't forget about checking. If the new lamps do not work, this means that the replacement was not carried out correctly. It is possible that the reason is that the new light bulb has some kind of defect.

READ How to strengthen the rear springs of a VAZ 2104

Dashboard side mounting screws

If the light does not light, then the cause of the malfunction may be a malfunction of the contacts. This is a pretty serious problem. It may require the help of a qualified electrician to resolve it as quickly as possible.

Another relevant tip concerns current trends. Some car owners are not looking for standard light bulbs for their VAZ, but modernized ones. You need to be aware that retrofitted light bulbs may have some significant defects. Ultimately, this can lead to damage to the instrument panel. In order to reduce the likelihood of such an unpleasant scenario, it is best to give preference to standard lamps for model 2114.

Reason for replacement

It is obvious: the light bulb in the dashboard is changed when it burns out. This can happen either due to a sudden power surge or due to the expiration of the light bulb.

No instrument panel backlight VAZ 2110 injector 8 valves description

weren't you mistaken? maybe f17 - 7.5 A?

Folks, maybe someone has a Murzilka on hand, look at which fuse is responsible for the illumination of the devices and what else is it responsible for?

Circuits protected by fuses.

? fuse Protected circuits (rated current)

F1 (5 A) License plate lamps. Instrument lighting lamps. Side light indicator lamp. Trunk light. Left side marker lamp. F2 (7.5 A) Left headlight (low beam). FZ (10 A) Left headlight (high beam). F4 (10 A) Right fog lamp. F5 (30 A) Electric door window motors. F6 (15 A) Portable lamp. F7 (20 A) Engine cooling fan motor. Sound signal. F8 (20 A) Rear window heating element. F9 (20 A) Recirculation valve. Cleaners and washers for the rear windshield and headlights. Coil of the rear window heating relay. F10 (20 A) Reserved. F11 (5 A) Right side side light lamps. F12 (7.5 A) Right headlight (low beam). F13 (10 A) Right headlight (high beam). Indicator lamp for turning on the high beam headlights. F14 (10 A) Left fog lamp. F15 (20A) Electric seat heating. Locking the trunk lock. F16 (10 A) Relay-breaker for direction indicators and hazard warning lights (in emergency mode). Hazard warning lamp. F17 (7.5 A) Interior lamp. Individual backlight lamp. Ignition switch illumination lamp. Brake light bulbs. Clock or trip computer. F18 (25 A) Glove box lighting lamp. Heater controller. Cigarette lighter. F19 (10 A) Door locking. Relay for monitoring the health of brake light lamps and side lights. Direction indicators with warning lamps. Reversing lamps. Generator excitation winding. On-board control system display unit. Instrument cluster. Clock (or trip computer). F20 (7.5 A) Rear fog lamps.

Attention! When repairing the electrical system, disconnect the terminal » — » of the battery (with the engine off). Before installing a new fuse to replace the blown one, find out and eliminate the cause of the burnout. Do not use oversized fuses or homemade fuses - this can lead to burnt out traces of the printed circuit board, and possibly a fire. Due to the risk of short circuits, do not pry open fuses with metal tools (screwdrivers) unless the corresponding circuits are de-energized.

Leon, friend, you're killing me. — Fuse F1 5 Ampere. (I even attached a drawing)

OK! I'll watch it, I just don't have time right now.

I am inclined to think that no, since I personally changed it myself, the left side lights (driver's side) did not work, and the instrument lighting did not work.

Source

The backlight of the VAZ-2110 instrument panel does not light up: reasons

At the beginning of work, it is important to exclude incorrect lighting settings. Pay attention to the rheostat knob; the brightness of the lighting depends on which direction it is turned. If you adjust the rheostat to the minimum value, the instrument panel will not light up. But in this case, it is enough to increase the brightness, and the problem will be solved. The increase occurs if you turn the knob to the right. If this fails, you need to look for an electrical problem.

There are several devices that are responsible for powering the lighting in a car.

First of all, you need to check:

1. Fuse F1 is five-amp. This device is located in the mounting block. If possible, verify the integrity of the fuse yourself. If it is intact, then to check its working condition you need to turn on the side lights and pay attention to which lights are on. The driver needs to get out of the car. The light should come from the left side lights or trunk lights. The right dimensions are powered by another fuse F11, so they are not worth considering. If the above lights are on, but the front instrument panel is still not illuminated, then you should pay attention to other devices, since fuse F1 is in working condition.
2. Rheostat. The element adjusts the brightness of the instrument panel illumination. Damage to the contacts results in a broken connection. The most basic problem is that for some reason the plug has come off the contact. In this case, it is necessary to correct all connections. You can make sure that the wires are out of order by shorting them directly. If the panel backlight lamps light up, then the problem has been found.
3. Printed circuit board of the instrument panel. One of the common problems that lead to the VAZ-2110 dashboard lighting breaking is the burnout of a board element. Power to the lamps is transmitted through a special path, which can burn out. This part cannot be repaired; in this case, you will have to purchase a new instrument panel.

Priora panel

Some people prefer the Priora's dashboard. You need to know that you won’t be able to change it with your own hands “in a hurry” - there are differences: in the wiring, in the mounting of the ECU.

It should also be taken into account that the Priora has the same “propensity” for unnecessary squeaks as the “native” one, so you should also think about sound insulation in order to “fit” the Priora panel without unnecessary gaps and cracks. Another drawback of the Priora is the small glove compartment. In addition, you must definitely purchase a mount in the ECU area, specifically from Priora.

What to do if the instrument panel on a VAZ-2110 does not light up

In some cases, problems can be solved on your own. Just read the instruction manual. You can solve a minor problem without having knowledge of electronics or work experience.

However, the electronics in a car are an important and complex system, which, if damaged, can seriously damage the vehicle. Contact a car service center for advice from an experienced technician.

If the backlight on the instrument panel of the VAZ-2110 does not light up, then do not panic. Repairing a car of this brand is financially inexpensive, and the electronics of old VAZs is primitive. Easy to do on your own.

Source

Separately illuminated arrows

LEDS IN THE INSTRUMENT PANEL FOR VAZ 2110 2111 2112

Video guide for replacement

instrument panel for VAZ 2110

-2112 with your own hands.
An example of replacing
...

How to remove the instrument panel on a VAZ 2110, 2111, 2112 and replacing light bulbs

Video review - Backlight styling

car interior VAZ 2110 replacement

all incandescent light bulbs to diode ones on
the panel
...

LED instrument panel VAZ 2110

If you want the arrows to glow a different color, you can do the following:

Note: in this case, the arrows will light up in a different color only when ignited.

Location of lamps on the dashboard of the VAZ 2110

In order to replace a specific light bulb, you need to clearly know its location. Let's look at the dashboard of a VAZ 2110 car and find out which light bulb is responsible for what.

The purpose and location of the dashboard lights of a VAZ 2110 car, where:

• 1, 5, 7, 8, 12, 15 and 20 – illumination of the pointer instrument system;
• 3 – control of the right direction indicator;
• 4 – control of the left turn signal;
• 9 – emergency low oil pressure;
• 10 – parking brake;
• 11 – the generator is faulty (the battery does not charge);
• 13 – activation of the alarm;
• 14 – malfunction of engine systems;
• 16 – control of turning on the high beam;
• 17 – critically low brake fluid level;
• 18 – control of turning on external lighting (side lights and low beam);
• 19 – critical fuel level sensor (reserve 6-7 l).

Removal and modification

Here's a quick look at the device and control panel icons. If for some reason she refuses, don’t immediately panic. Most often, the reason is the absence of contacts in some place in the wiring. But of course, if you wish, you can completely change or tune the panel.

For example, remove the cover and replace the light bulbs with brighter LEDs. Such a panel works brighter and the signals sent by the car will be more noticeable to the driver. If desired, you can install a more solid europanel, which will transform the interior.

To remove the panel you need:

1. Disconnect the “-” wire from the battery;
2. Remove the shield by unscrewing the screws;
3. Remove the fastenings of the control panel to the trim, remove the instrument cluster from the socket;
4. Remove the glass mask;
5. Disconnect the wires from the block;
6. Make changes to the instrument panel or replace it with a new one. Reassemble everything in reverse order.

Designations of indicator lamps on the instrument panel of VAZ 2110 - 15.

Many car enthusiasts are faced with this seemingly simple question. What do the indicator lights on the instrument panel mean?

And what do we know, they all light up together only when the ignition is turned on, and when one of them lights up while driving, it becomes a little uneasy.

I didn’t know this myself when I switched to a “two” after the “seven”, half of the 2107 didn’t light up at all, so I didn’t know what it was and what it was for. And a friend of mine, after buying a car in Novorossiysk, even bought a whole book on VAZ , due to ignorance of these light bulbs.

The symbols on the instrument panels on all VAZs are almost the same, just the location is different.

Let's start in order.

1 — Coolant temperature, in degrees Celsius.

2 — Tachometer, engine speed.

5 — Speedometer, vehicle speed in km/h.

6 - Fuel level in the tank. When there are 5-7 liters left, a yellow light comes on - a warning or an icon with a picture of a gas station.

7 - Actually, this is an image of a gas station, signaling the need to refuel.

8 - Indicator lamp for turning on the dimensions.

9 — The brake fluid level is low, it may be leaking somewhere.

10 - Turn on the high beam.

11 - Clock adjustment knob (hours/minutes - switches when pressed), sometimes this knob serves as the function of switching the total mileage/day mileage (on panels with a narrow display).

12 — The display showing the total mileage/daily mileage is narrow on some models.

13 - Hazard warning lamp - “hazard light”.

14 - Check Engine, often indicated by this icon - this means a malfunction in the engine, it is recommended to stop the engine.

15 — Display with a clock (can show the outside air temperature if there is a temperature sensor).

16 - Malfunction in the battery charging system: loose or broken generator belt, generator malfunction, open circuit and other problems.

17 - Parking brake indicator.

18 - Insufficient oil pressure in the engine, it is recommended to turn off the engine and find the cause.

19 — Air damper light (on carburetor engines)

I’ll also add about the lamps on the additional panel in the dashboard of the VAZ 2110 - 12.

— The light marked with an arrow is a check for malfunction of the dimensions or brake lights. — Below is a brake pad wear indicator, if it lights up, check the brake pads, maybe it’s time to change them. — Seat belt warning light — this is clear from the picture.

On the other side from above:

— Low engine oil level — Low washer fluid level — Increased coolant temperature

This is how the review turned out. If some kind of lamp lights up and the signal beeps, do not panic. Usually these are small things.

Save this note to yourself on your social network by clicking on one of the buttons below.

What lamps are installed and how many of them?

The VAZ instrument panel is illuminated and the status of the vehicle’s components is indicated using 12 V 1.2 W incandescent lamps, which are installed in a 2W2 socket. The lamp is easily pulled out of the socket - you just need to pull it with your fingers; it can be purchased either separately or with a socket. In total, 20 lamps are used for lighting and indication in the instrument panel for the VAZ 2110, and they are inexpensive - 5-10 rubles. (at the time of writing) depending on brand (without cartridge).

VAZ car lamp installed in a socket and without it

If desired, instead of incandescent lamps, you can install LED ones in the VAZ instrument panel - they are produced for the same voltage with the same standard size and can be either with or without a socket. By the way, in the latest modifications of dozens of VAZs, LED light sources have already been installed.

LED bulbs without socket and with socket for VAZ 2110

Why are LEDs better?

First of all, they have a longer service life (up to 20-30,000 hours instead of 1,000 for incandescent lamps). They are not afraid of vibrations and are 8 times more economical. But you have to pay for all this in the literal sense of the word: LED light bulbs are many times more expensive than their conventional incandescent counterparts. If you consider that there are 20 of them in the VAZ panel, the amount will be considerable.

Be careful with the generator warning lamp; based on feedback from our readers, it is better to replace it only with the same one.

Instrument control panel illumination

To illuminate the stove, you first need to carefully remove the plastic handles of the levers that control the dampers and remove the glass. Below it is the stove itself. To do this, take any sharp object (knife or scissors) and carefully pry the glass. Prepare foil according to its size. It will be an additional source of illumination.

Fixed on the inside of the glass, it will give a very attractive appearance to the stove, and the console illumination will not be concentrated only in the place where the LED is installed next to the handle.

The next step is to remove the lamp socket from the backlight of the stove control unit. The lamp must be replaced with a purchased LED. In order for the light to spread around the entire perimeter of the stove, an LED strip is used, which is glued to the bottom. Two wires are usually soldered to the contacts, which are connected to the cartridge.

All connections are carefully insulated. Assembly is carried out in reverse order. If one of the parts does not work, check all contacts and connections again. The lighting of the stove control panel will become much better and more modern; the light from it will spread throughout the entire perimeter both day and night.

READ How to change the headlight bulb on a Kia RIO

Illumination of the heater (stove) control console.

Remove the plastic handles for the heater damper control levers. Remove the glass of the stove control unit by picking it up with a knife. We make a reflector out of foil and fix it under the glass of the VAZ 2109 heater control unit. If it is not made, the console backlight will be concentrated only in the place where the backlight LED is installed next to the heater fan speed control knob, and will decrease towards the opposite area, which does not look very good attractive.

Then we unscrew the lower part of the center console (the beard), remove the socket with the backlight lamp for the heater control unit and change the lamp to an LED. We put everything back together in reverse order.

It should be noted that simply replacing the backlight lamp with an LED one, despite all the tricks, will not achieve completely uniform illumination of the heater control panel. Although this is still better than the standard backlight.

To finalize the illumination of this unit, it is best to stick a 10 cm long LED strip to the bottom, solder 2 wires (plus and minus) to its contacts, and connect the wires to the backlight lamp socket of this unit. Just act carefully, do not leave uninsulated sections of wires to avoid a short circuit!

LED strip for illuminating the heater control panel

Now the backlight of the heater control panel glows brightly and evenly over the entire area. Moreover, this illumination is noticeable both day and night.

Illumination using LED strip

This is what the backlight looks like during the day

However, if in the daytime everything is great with the backlight, then when it got dark, I realized that the brightness of such a backlight was excessive for me, and it would be nice to make it a little less bright. You can, of course, adjust the brightness of the entire instrument panel illumination using the corresponding regulator to the left of the steering wheel, but the brightness of the remaining instrument panel illumination lamps suited me, so I did it differently. We take a black marker and paint over the coating above the LEDs (my LED strip is insulated) to the desired level of light transmission - and the problem of excess brightness is solved. The photo above shows a version of the backlight already modified in this way. You can also cover the LED strip with a piece of tint film, the effect will be the same.

How to remove the tidy

On a VAZ 2110, removing the dashboard from the dashboard is not difficult, and the only tools you need are a Phillips screwdriver and pliers or a wrench. With their help, we will remove the positive terminal from the battery before starting work. So, lower the steering wheel and unscrew the 4 screws that secure the decorative trim.

Releasing the decorative trim on the VAZ 2110

After this, we pull the cover towards ourselves, and it can be easily removed, hanging on the wires of the switches. To prevent the cover from getting in the way, the wires from the switches can be disconnected - they are on the connectors.

Restoring the backlight and changing the warning lamps

We remove the light bulb that needs to be replaced (the purpose of the light bulbs is in the first photo of the article). To do this, turn the socket counterclockwise 90 degrees, and it will easily come out along with the light bulb.

Replacing a light bulb without disconnecting the power wires on a VAZ 2110

We remove the burnt device from the socket, insert a new one in its place and install the socket with the lamp in place, turning it 90 degrees, but clockwise. After this, we install the terminal on the battery, turn on the ignition and check the operation of the VAZ panel, performing the appropriate manipulations: turn on the hand parking brake, headlights, turn indicators, high beam headlights, etc. If everything is in order, then install the panel and decorative trim in place .

How to change the backlight using color film

Old dashboard of VAZ 2110

In order to change the color of the dashboard lighting, it is not necessary to change the LED bulbs.

• Take 12 LEDs and an LED strip.
• Remove the light bulbs from the base and insert one LED at a time in their place.
• You need to take the required amount of LED strip.

Note: its length is measured according to the size of the panel.

• The base and LEDs must be returned to their original location.
• The tape should be glued to the plastic of the panel (the appropriate temperature must be maintained).
• Tighten the block well.