Currently, vehicle theft is one of the most common crimes. A car, regardless of what brand it is, where it is stored and how much money has been invested in ensuring its safety, makes the owner constantly nervous and afraid of theft. To protect your car to the maximum, you should make sure that the alarm system with auto start is installed correctly.
In the process of protecting a vehicle, these devices are very popular. Alarms of this type are activated if certain problems arise with the machine. This may be a situation when a shock sensor, a microwave sensor, was triggered, or the trunk or door was opened.
Modern alarms with auto start are the optimal protection for cars against theft. It is for this reason that you should not neglect the installation of a protective device. It is worth contacting the service center employees or doing the installation yourself.
How does autorun work?
The alarm system is an electronic system that consists of a block with contact groups. It is used to connect wires, as well as a key fob, which serves to transmit a control signal to the unit.
When a signal from the key fob is sent, the system reads the code received from it and simulates a normal car engine start, namely:
- the car's ignition is turned on;
- the clutch is removed and the starter is cranked;
- the system monitors engine starting;
- After the engine starts, the starter stops.
Most modern car alarms have a so-called intelligent autostart, in which the system repeats the start of the starter and increases its operating time if the engine does not start the first time.
After starting the engine, the system turns on programmed functions, such as heated glass, steering wheel, interior heating or air conditioning, etc.
Additional information for TW-9010
It was said that the TW-9010 car alarm can turn on the engine based on temperature. To set the required value, enter the programming mode: turn on the ignition (engine off), press the Override button 6 times, turn off the ignition. Select the option with the required number (in this case “2”) by pressing the button the appropriate number of times.
Based on the data given here, the starter operating time is also determined.
Note that the value "3000" is only used when tach control is active.
You can activate the daily start: press the Override button 4 times. Before doing this, you need to turn off the ignition, and after setting the mode, turn it on. You can also enable temperature triggering: instead of pressing 4 times, use 5 times. The trigger value (on/off) can be changed by pressing once. One “beep” corresponds to the “on” value, two – to the “off” value.
Availability of autorun function
All modern car alarms have an autostart function, which can be activated directly by yourself or by programming the key fob. Like any system, this function has its advantages and disadvantages.
Advantages
Having understood the main features of the automatic start of a car alarm, you can appreciate all the advantages that such a function provides. Among the main positive factors are:
- The ability to go out in the morning to a fully warmed up car. This allows you not to freeze in the car, but to leave the entrance, get into the car and immediately drive.
- Significant time savings, which is so important for a modern person. Using the autostart option will allow you to avoid wasting time waiting for the engine to warm up to operating condition.
- The driver is guaranteed to be able to drive his car even in severe frost. If you set autostart in a certain mode, the engine will start when the temperature drops to the programmed parameter.
- Significant reduction in possible wear of parts, which significantly increases the overall engine life.
Along with the positive aspects of using an automatic alarm system, it is worth noting some disadvantages of its use.
Flaws
The most important disadvantage is the increased fuel consumption. In the cold season, the engine will have to be started several times a night, which will waste additional fuel.
Another disadvantage is the possibility of draining the battery. During the process of starting the starter, a fairly large amount of current is consumed, as a result the battery may be discharged a little faster than expected.
In order not to be faced with a failed battery in the morning, it is important to configure the system correctly. It is necessary to allow the motor to run for about 15 minutes so that the charge is fully restored.
This is interesting: How to check the authenticity of an MTPL policy? 4 easy ways
The main purpose of the alarm is to ensure the maximum level of comfort during the operation of the car. For this reason, all the pros and cons should be considered in this spectrum. With the right approach, all disadvantages can be significantly reduced. The main thing is to know how to start a car from autostart correctly. You can’t fix only increased fuel consumption, but as you know, you have to pay for comfort.
Selecting a system and preparing for work
One of the advantages of self-installation is complete confidentiality. Only you and no one else will know where the key anti-theft parts are located, and what other surprises for intruders, additional options, are in your car.
For a successful outcome, you need to analyze and understand from the very beginning what exactly you want from an alarm system, where your car is stored and what is of primary importance: a loud siren or a timely return signal to a key fob with a long range. There are now plenty of inexpensive universal systems; moreover, they generally include all the necessary options. From the ability to remotely start the engine, to the vehicle's tilt angle sensor.
In fact, there is no huge difference in the kit of one company from another. It is advisable to immediately purchase a signaling device with a feedback key fob; you should not skimp on this, it will definitely come in handy. But basically in the box you will find:
- Siren device;
- All kinds of wires, strips, harnesses;
- Control block;
- Antenna (the price of the entire set will depend on its range);
- Key fobs (one with a display, the other without);
- Instructions.
In our case, instructions are extremely necessary. Do not throw it away or lose it until you decide to change the anti-theft agent again.
Read also: Nissan Serena body dimensions
Installation tool
In order to properly install the alarm and ensure its proper operation, we prepare in advance all the necessary means at hand. First of all, we will need:
- Insulating tape to match the color of the wiring in the car;
- Phillips screwdriver, screwdriver, hammer;
- Multimeter.
Let's talk about the last device separately. To connect the wires, we need an electronic multimeter. Familiarize yourself with the principle of its operation in advance. Without it, you won't be able to connect the electrical system.
TOP alarm models with auto start
Many drivers have difficulty choosing a device; they do not know what kind of alarm system with auto start should be, or which one is better. To make the choice easier and faster, it is worth studying some popular models of such devices.
One of them is the Pandora . The best option from Russian manufacturers. The device is sold at an affordable price and is distinguished by the presence of high technical solutions. In fact, this is a special multi-block design, which is designed to make it as difficult as possible for criminals to steal a car.
The system includes a modern 3D accelerometer designed to process data regarding impacts, tilts, and movements. There are no false positives in this case. The device is configured via a USB port, so you can easily adapt it to your needs. The necessary equipment can be downloaded from the manufacturer’s official website.
If you are interested in what other alarm systems with auto start exist and which one to choose, it is worth studying three more of the most popular and relatively inexpensive systems:
- Starline A93 . This is the cheapest alarm system with auto start. Along with the affordable price, one can note a fairly high degree of protection of the device from hacking.
- Sher Khan . One of the most reliable and fairly affordable alarm systems. A distinctive feature is the presence of a fairly wide range of functionality, among which we can note the option of finishing the glass, as well as control over the general condition of the on-board network and temperature conditions.
- Cenmax . An affordable alarm system that is not inferior in reliability to the options listed above.
When choosing reliable anti-theft protection for your car, you should not give preference to Tomahawk . These options are in demand due to their relatively low cost, but their technical properties and characteristics are quite low. The devices are characterized by a high percentage of false positives and are relatively easy to scan. This makes the vehicle quite an easy target for burglars.
After you have carefully studied the rating of alarm systems with auto start, as soon as you understand which device is most suitable and you have purchased it, you can begin to consider its installation.
Best modules
Today, the market for auto parts, accessories and electronic systems offers a wide selection of autostart modules. Among other modifications, it is necessary to highlight AlarmStart GSM. Such a module costs 29,900 rubles. This is a universal kit that allows you to activate the internal combustion engine using a key fob or mobile application. The system is completely autonomous and does not require integration with an alarm system. It works independently of different automotive technologies. You can launch such a module with a phone call. Commands are also received via SMS messages.
Car owners will be able to activate the function by pressing the corresponding button in the mobile application. AlarmStart GSM also has a programmable timer, which can be adjusted depending on the wishes of the owner. This kit is suitable for any make or modification of car.
No less interesting is the AUTOLIS Mobile
(RUB 29,600). This module is equipped with an Italian-made GSM modem. It is necessary to note the presence of a voice interface. Consequently, owners of this kit will be able to give voice orders. Has equipment and an SMS alert option. Commands can be issued online.
The module is reliably protected from hacking attempts via GSM communication. The same GSM system is responsible for setting coordinates while moving through unfamiliar terrain. You can control such a module using any modern gadget.
The module is configured according to the individual needs of the car owner. Each user will be able to choose the method of notification and autostart of the internal combustion engine. Performs a set and function of a car alarm. It will notify the car owner of any danger in the shortest possible time.
StarLine S96BTGSM
– another functional solution to the problem with remote autostart of vehicles. This security and telematics complex was developed in 2022 and is in great demand on the market. It will cost car owners 10,990 rubles. Using this module, launch can be done in the following ways:
- From a smartphone;
- BluetoothSmart;
- GSM interface;
- Interfaces 2CAN+2LIN.
This kit can be installed quickly and absolutely safely. It should be noted that the module is extremely energy efficient. With this equipment, the driver will be able to monitor the condition of the car remotely using a mobile application. In addition to starting the internal combustion engine, the interface can also be configured for heated seats, auto glass or steering.
Among the autonomous engine autostart modules, it is necessary to highlight Data StartVW (RUB 12,500), which is programmed online. Most often, such kits are installed by owners of Volkswagen, Skoda and Audi. On sale you will find two versions of this kit. The first one comes with a remote control. And the second one has a one-button analogue. Devices communicate with the antenna via a reliable channel. AES-128 encryption is used, which eliminates system hacking and car theft. Such a kit can be installed in conjunction with an alarm system or independently.
When choosing remote engine start units, you need to pay attention to the domestically produced Autostart module. This kit costs only 3990 rubles
It is produced by the company, which has been producing protective systems for vehicles for more than 10 years. In order for the engine to start using such a module, the driver needs to press Lock four times. The kit is easy to use. And it is installed very easily, without the involvement of specialists. You just need to connect the wires correctly.
Conclusion
Modern autostart modules for internal combustion engines help to achieve the optimal operating temperature of the entire vehicle and prepare the interior for the driver and passengers. They differ in their functionality, reliability and durability. In the winter cold, such systems are responsible for warming up the main unit of the vehicle, and in the summer heat they help cool the interior by starting the air conditioners.
However, we should not forget about the increase in energy and fuel costs when installing such units. Excessive fuel consumption is a serious problem for most car owners. Therefore, it is better to make the final decision on installing such equipment taking into account all the positive and negative aspects.
Video about autostarting a car engine:
Car alarm installation
The installation of a modern car alarm can be carried out by professionals. To do this, you will need to contact a dealer or service center. This is the best option if you do not have certain knowledge, tools and skills, if you have no idea what connection points for alarms with auto-start are. If you have all of the above at your disposal, you can carry out the installation yourself. Each of the options for working with the device is worth studying in more detail.
From an official dealer
Modern dealerships install additional equipment on cars during the sales process, including car alarms. This process is not carried out on a voluntary basis. Disagreement with the installation of an alarm system may result in the car owner being denied a warranty. The cost of installing an alarm system with auto start in this case is relatively small, and quite often is included in the total price of the purchased car.
At a specialized service center
If you are purchasing a used car or simply want to change the device, you should contact a service center. This is an ideal opportunity to carry out the installation professionally and strictly on time, to protect the car from theft. Services of this type are provided at an acceptable cost and provide other equally important advantages:
- company warranty for a period of one year on installation work performed;
- manufacturer's warranty for installed equipment;
- The entire package of accompanying papers and certificates is issued to maintain the guarantee.
This is interesting: The most stolen cars
Modern service centers install various types of protective equipment. You can order services for the installation of one-way car alarms, devices with feedback, as well as devices of the GSM or Slave category, equipped with a remote control system.
Video
User Vitaly Ershov in his video talked about how to independently activate the autostart of an internal combustion engine using the example of a Jaguar alarm system.
Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question
Was this article helpful?
Thank you for your opinion!
The article was useful. Please share the information with your friends.
Yes (100.00%)
No
X
Please write what is wrong and leave recommendations on the article
Cancel reply
Rate this article: ( 1 vote(s), average: 5.00 out of 5)
Discuss the article:
The price of an alarm system with auto start and its installation
Before the driver decides to contact a service center, he is interested in the price of such a service. It directly depends on the make of the car and the type of alarm system installed. If you are interested in average prices for installing car alarms, it is worth studying the approximate price list for work of this type:
- with auto start for foreign cars - 3,500 - 5,000 rubles;
- with auto start for domestic cars – 3,000 rubles;
- one-sided for foreign cars - 2,500 - 3,500 rubles;
- one-sided for domestic cars – 2,000 rubles;
- double-sided for foreign cars - 3,000 - 4,500 rubles;
- double-sided for Russian cars – 2,500 rubles;
- additional blocking - 600 - 700 rubles;
- secret button - 1,500 - 3,000 rubles;
- security device for the front door - 500 rubles;
- security device for the front door - 600 rubles;
- module for lifting glass – 700 – 1,500 rubles;
- volumetric sensor – 500 rubles;
- door switch - 500 rubles;
- keyless crawler for an installed immobilizer – 6,500-7,000 rubles.
As can be seen from all of the above, the cost directly depends on the type and category of equipment being installed. These are approximate prices; more precise prices are set at each service station separately. If you want to save money, you can do this process on your own.
Some tricks
1. Leave a car with a manual transmission in neutral or with an automatic transmission in position P. Otherwise, when you turn on the engine, the car is likely to jerk.2. Decide on the launch method: by timer or remotely
This is important, since in the first case you can forget about starting and leave the car idling
3. Remember that the key fob is limited to 400-450 m.
Self-installation of autorun - steps
The instructions are based on a Mitsubishi Outlander with automatic transmission, 1.8i, analogue connection.
1. If it’s an automatic transmission, then put it in park; if it’s a manual transmission, put it in neutral and lock it with the handbrake.2. We start by disassembling the interior panels. To do this, use a plastic spatula to pry up the climate control edging on the right side. It is mounted on pistons. Let's click them out.
3. Move towards yourself with your left hand (under the steering wheel) and remove the climate control trim. The location of the immobilizer bypass antenna (if there is one) should be as in the photo below.4. Using a spatula, disassemble the left air duct. It must be removed along the contour and toward you.5. Undo the connectors and remove the cover.6. Now remove the center console trim. We also do this with a spatula, inserting it into the joint from above. We snap off the perimeter caps from the torpedo.7. Remove the lower part of the center console.8. Under the steering wheel there is a small panel with 5 pistons. We remove it by snapping out the pistons.9. Next, we snap off the side trim to the left of the torpedo. We act by helping ourselves with a plastic spatula. There is also a piston fastening system. We snap them off.10. Now it's time to cover the instrument panel. To carefully snap out along the entire perimeter, pull from the torpedo itself.11. To remove the instrument panel, you will need a Phillips screwdriver. Unscrew 1 bolt, as shown in photo.12. We dismantle the instrument panel, separating it from the dashboard.13. Don't forget to disconnect the connector to the instrument panel. It is located in the upper right part of the panel.14. Remove the steering column pad by unscrewing the self-tapping screw on the left.15. Overlay on the pistons. Carefully pry it out of its seat.16. Disconnect all connectors in this part.
17. Remove the upper part of the steering column casing by pulling it up and towards you.18. Remove the lower part of the casing by unscrewing 1 screw and pulling it down.19. Remove the threshold on the driver's side. Turning your fingers towards the center of the car, pull it upward.20. The threshold is removed, exposing the braided wires.21. To remove the kick panel, unscrew the plastic cap nut at the bottom.22. Grab the top of the kick panel and pull it towards you.23. Now remove the front strut trim. Pull it towards you and release it from the pins.24. The interior is completely ready for installing the autostart. The description of the wiring part is partially shown in the photo. For correct wiring and connection of the wires, please refer to the alarm installation instructions. It is convenient to enter the engine compartment through a standard rubber bulb, as shown in the photo. We wish you successful self-installation of the autostart .
Instructions for self-installation of an alarm system with auto start
If for some reason you are not satisfied with the price of a car alarm with installation, you can perform this operation on your own. This process requires mandatory preliminary preparation. Installing a car alarm with auto start yourself will require the following tools and materials:
- figured screwdriver;
- self-tapping screws 10 - 15 mm;
- insulating tape;
- side cutters;
- 10 mm socket wrenches;
- plastic clamp for 200;
- soldering iron 60 W;
- solder POS-60;
- corrugated tube 10 mm;
- diode 1N4007.
After the preparatory part of the question has been solved, namely, how to install an alarm with autostart with your own hands, you can do the actual installation. This event consists of the following sequence of actions:
- The main parts and elements are removed and dismantled.
- An LED is installed on the glass.
- The service button can be mounted in any convenient place.
- The central locking is being connected. This operation must be carried out so that the connection is active in two places at once.
- The alarm unit is installed under the instrument panel
After all the above steps and correct connection, it is worth adjusting the shock sensor and programming the protection device in a special way. At this point, do-it-yourself autostart can be considered completely finished. The car is then completely protected from theft and can be used.
Installation of wires and harnesses (tracing)
Most car alarm kits have a full set of conductors, harnesses and connectors to connect the units.
The random placement of these harnesses and conductors under the dashboard immediately catches the eye of car thieves, who can correct the connections and start the car.
There are several recommendations on how to make the alarm invisible:
- The conductors should be laid along the standard vehicle harnesses;
- fasten the harnesses with plastic clamps;
- if the length of the conductors included in the security device kit is not enough, they should be extended with wires of a similar cross-section and color;
- Alarm units must not be secured to clamps; self-tapping screws are used for this;
- Wire connections must be made using the “twisting plus soldering” method, placing the connection point in heat shrink;
- non-standard single conductors are installed secretly so that it is impossible to reach the central block via them.
Do not lay conductors and harnesses in close proximity to heating parts and components, such as a stove.
We set an alarm on a VAZ 2110. Video:
Precautionary measures
To ensure your safety, you should make it a habit not to leave your vehicle at speed. Otherwise, the autostart, assembled with your own hands, will start the engine, the car will start moving, since the gear is engaged. It is better to have a good handbrake, but it is not recommended to use it in winter. In addition, please note that you must block all incoming calls. This measure was discussed in detail above. All electrical networks must be protected with fuses.
All power circuits of the electromagnetic relay windings must be connected to the battery only through fusible links. This will prevent a fire if a short circuit occurs. However, if you use a car alarm, all protection devices are included in the installation kit. It is also worth noting that starting the engine yourself using an alarm with feedback is the most reliable and reliable option. And the cost will not be too expensive.
There are a lot of autostart control systems, but choosing the one that is ideal is quite difficult. Try to analyze the costs of different designs. A do-it-yourself engine auto-start module can contain either an alarm system or a cell phone. The last option turns out to be the most suitable. Especially if you have an unnecessary phone that can receive calls.
The only costs are the purchase of relays, wires and a SIM card. But there will be much less hassle with the alarm, since in this case it is used for its intended purpose. The only thing that needs to be done is reprogramming. And this is not always necessary, since usually the time of closing the contacts of the second channel is enough to ignite the air-fuel mixture in the combustion chambers. And the engine starts in less than one second. In some cases, the time increases to three. It’s easier to autostart the generator yourself, but you’ll have to carefully study the connection diagram to avoid mistakes during installation.
Installing an Alligator alarm on an audio) The material is generally useful for all B5 owners. The connection points are the same for virtually everyone. (Just a couple of exceptions) Useful links: -One of the best reports. Alarm Cenmax - Also a small report Connection points to the wiring, tables Drive2. Installation Alligator. Already with diagrams
Start. The alarm unit includes 3 main chips with wires. This is alarm control (limit switches, sensors, etc.), door LOCKS control and auto start control. You can connect one at a time so as not to get confused in this heap of wires.
1 Alarm control: This includes a siren, temperature sensor, limit switches, warning lights, autostart control input (tachometer or generator or oil sensor), as well as 3 more channels to which -200Ma can be supplied. I sketched out the connection in the form of a diagram.
2 door lock control Diagram. There are only two wires to the locks, the control is negative.
3 connecting autorun I took a diagram from one of the reports written earlier by users and added it a little.
4 Bypassing the immobilizer There are several options. You can install a crawler by registering one key and sticking it there, or you can rip the capsule off the key and tape it to the ignition switch approximately in the place where it points when the key is turned. In the first case, there will be difficulties with theft, in the second case, the car can be started with a blank)
5. Location of sensors and components. Siren
it must be placed in the engine compartment, in a place that is protected from high temperatures and water.
The temperature sensor
must be placed in a place protected from moisture but as close as possible to the engine in order to have a minimum error in temperature. I put it under the plastic engine cover.
I connected the wires with regular twisting, because, as I found out, my soldering skills are very poor and it’s inconvenient to climb there to solder. I simply wrapped the places where they cut into the standard wires thickly with electrical tape. I covered the junctions of the wires with heat shrink. Under the hood, all the wires that go into the interior were put into special corrugations.
Done, alarm is on. We check the functionality of all nodes. All that remains now is to SET IT UP.
6 Setting up the alarm This is done programmatically according to the instructions and is MANDATORY, it is important to do this specifically for autostart, otherwise the car will not behave correctly, become dull and stall when you try to start it remotely. We enter the program mode using the book that comes with the whitefish. Set the settings as follows: Monitoring engine operation using a tachometer signal
(if you threw a signal wire on it, and I would advise you to hook it on it)
Manual transmission
(respectively, if you have a stick) After you have set the settings and started the car, press and hold the Valet button for 5 seconds so that the system is memorized I wrote down the tachometer revolutions. The beacon will blink when the system is finished. Thanks to the people who explained some details. All
