The Russian alarm system Starline A91 does not need advertising, its reliability has been tested by time. Almost all owners prefer this particular model, which combines the best developments of the company’s engineers at a relatively low cost. A wide temperature range allows you to use the security system in all weather regions of the Russian Federation without problems.
Currently, the model is not produced, it was replaced by the most advanced alarm system of the 4th generation A93, however, this complex can still be found on the shelves of auto stores.
Equipment
The starline car alarm kit contains everything you need to install the equipment. The packaging cardboard box contains:
- two service books with annotations on the installation and operation of the alarm system;
- central control unit;
- main and spare key fobs;
- transmitting/receiving module;
- a set of sensors;
- Limit switches;
- set of wires;
- sound siren;
- service key;
- LED indicator lamp;
- Keychain case;
- battery.
Technical properties
The table shows the full technical characteristics of the starline A91 car alarm.
| Range of used radio frequencies | 433.05 to 434.75 MHz |
| Number of control channels | 128 |
| Communication distance of the key fob in transmitter mode | 800 meters |
| Communication distance of the key fob in pager mode | 2000 meters |
| Operating distance of the spare key fob | 15 meters |
| Shock sensor | piezoelectric |
| Operating temperature range | from –40 to +85 °С |
| Supply voltage spectrum | from 9 to 18 Volts |
| Current consumption in security mode | less than 15 mA |
Very permissible current at the connection outputs.
| Siren | 2 Ampere |
| Direction indicators | 2 x 7.5 Amps |
| Electric door lock drives | 15 Amps |
| Turning on the ignition | 25 Amps |
| Enabling ACC | 25 Amps |
| Turning on the starter | 25 Amps |
| Integrated motor lock | 15 Amps |
| External motor blocking | 200 mA |
| Additional control channels | 200 mA |
| Power supply for two-way communication key fob | 1 AAA 1.5 volt battery |
| Power supply for additional key fob | 1 CR2450 3 volt battery |
Main Abilities
The main function of the starline security alarm is to warn others and the owner of the car about unauthorized attempts by third parties to enter the vehicle's interior.
When you try to open the doors, hood and trunk, a siren warning sound is triggered, accompanied by a blinking light.
Immediately the driver receives information on the key fob about violation of a certain security zone:
- opening the door;
- trunk;
- engine compartment;
- impact on the car body.
Additional functions
In addition to the main security functions, the starline auto-start alarm system allows you to start the engine in several modes:
- remotely from the key fob;
- at a certain time with the introduction of a timer;
- when a certain low temperature threshold is reached.
For diesel cars, a turbo timer mode is provided, which turns off the engine after the turbine temperature drops.
The GSM telematics module allows you to receive information and perform control without restrictions in the mobile communications coverage area. Allows you to find the coordinates of the location and route of the vehicle with an accuracy of up to 4 meters.
Description of the alarm key fob
The body of the starline alarm key fob is made of durable plastic and can withstand repeated falls onto a hard surface.
The main key fob for the starline alarm system is equipped with a liquid crystal screen on which intuitive pictograms are displayed. Three control keys are located on the side of the ergonomic body. The secondary key fob has two keys located on the flat side of the case.
Basic key fob keys
The first button, when pressed slightly, closes the door locks and turns on the security mode. A long hold turns on the alarm without sending signals. Pressing the key twice activates the shock sensor.
A single press of the 2nd key unlocks the doors and disables the alarm. Holding the key for a long time opens the locks and disables the security system in silent mode. The shock sensor is deactivated by double pressing.
A single press of the third key allows you to diagnose the security system and temperature readings inside the cabin. Holding the key pressed selects the autorun mode. Double pressing starts the engine warm-up mode.
Additional key fob keys
The two keys of the secondary key fob do exactly what the first two keys of the head unit do. The 3rd button is missing due to the one-sided connection used.
Installation of alarm system Starline A93
An experienced electrician spends about 5 hours installing a Starline alarm system. It is completely natural that if someone produces the installation without the help of others, a similar operation will take even more time. For this reason, almost everyone prefers to create installations in service centers. For those who are able to install an alarm system without the help of others, we will tell you most thoroughly.
Self-installation: step-by-step summary
All installation work must be carried out carefully. The connections in the places where the wires are twisted are soldered with a soldering iron and insulated. The alarm elements are firmly fixed in places that are difficult to reach by water and temperature.
Before starting work, you should de-energize the system by disconnecting the battery terminals.
The work is performed in the following sequence:
After connecting the battery, check the functionality of the system.
When connecting the battery, the security mode may be activated; it is not allowed to leave key fobs inside the car.
Operation of the Starline A93 alarm system
Compositions of key fob buttons
Control of the Starline alarm functions with auto start is done from the main key fob by touching one or two buttons. The table below shows options for enabling the main functions
Function programming
To program the starline a91 alarm functions, you need to enter the menu. To do this, press the service button 5 times with the ignition off. Turning on the ignition, we wait for 5 alarm responses confirming entry.
Next, use the Valet button to select the option function. Of the 4 proposed options, the more suitable one is selected using the key fob keys. A short press of the first key corresponds to the first option, a long and short press corresponds to the fourth.
The 2nd button is for the second and 3rd, respectively, for the third option.
In the operating instructions for the Starline car alarm there is a function programming table that looks similar.
Turning off the alarm from the key fob
In order to be able to disable the Starline alarm from the key fob, you should set an individual code consisting of one, 2 or 3 digits, with a number value from one to 6.
To do this, enter the programming mode and select function 9. The PIN CODE icon will appear on the key fob monitor. To enter the PIN code setting mode with the ignition off, you need to press the service key 4 times.
After this, turn on the ignition and press the service button once; entering the mode for setting the first number of the code will be confirmed by a single sound of the siren.
Then, within 5 seconds, using the buttons on the key fob, enter the first digit of the code according to the table.
Using a similar method, you can set the next digits of the code.
Specifications
The Starline A91 Dialog security complex has the following technical parameters:
- operating frequency of radio control signal transmission - 433.05-434.79 MHz;
- number of independent control channels - 128;
- operating distance of the key fob transmitter - 600 m;
- distance for receiving signals with a key fob (pager functionality) - 1800 m;
- operating range of the additional remote control (with a one-way communication channel) - 15 m;
- temperature range of guaranteed performance - from -40°C to +85°C;
- supply voltage (DC) - 9-18V;
- The shock sensor design is a piezoelectric element;
- Constant current consumption in standby mode is no more than 15 mA.
The operating distances of key fobs declared by the manufacturer were obtained in conditions without radio interference. In dense urban areas, the distance is reduced by 3-6 times.
The control unit of the Starline A91 security complex allows currents of the following strength:
- siren power supply - 2A;
- control of direction indicator circuits (separately on the left and right sides) - 7.5A;
- electric side door lock drive - 15A;
- ignition or starter circuits - 25A each;
- control of additional equipment ACC - 25A;
- power unit operation blocking controllers - 15A;
- additional channels - 0.2A;
- backup engine blocking (external type) - 0.2A.
Starline A91 alarm review - we will tell you about the reliability of StarLine A91
General signaling requirements
- Cars must be parked taking into account the range of the key fob;
- The vehicle's transmission must be considered;
- Safety measures are indicated when enabling autorun using Starline.
The instruction manual outlines the sequence of installation, configuration, and use of the security alarm (you can download the manual below).
Characteristics of the Starline A91 alarm system
The compact, lightweight LED device perfectly copes with the tasks of protecting the car and notifying the owner of violations of the standard mode. It will not only warn the owner, located at a distance of up to two kilometers from the iron friend, about an attempted theft, but will also help with protection. Special built-in functions of the Starline A91 car alarm will block the operation of any existing code grabber used by a car thief.
Intelligent code protection, based on the interactive presentation of information, has the ability to create individual encryption of information transfer.
The Starline company, on the A91 model, was the first to use the principle of different frequencies and their frequent changes when transmitting code information. This made it possible to prevent interception and loss of data.
The Starline A91 alarm system has automatic engine start at a distance of up to one kilometer from the car, easier search for it in a parking lot, and the ability to block radio signals and interference due to a 128-channel transceiver. An improved (compared to previous series) ratio of noise absorption and signal receipt, an acceptable price (from 12 to 15 thousand rubles) enhance the brightness of the impressions from purchasing the Starline A91 alarm system.
The package includes key fobs with and without a liquid crystal indicator, which allow you to control the functions of the device. The menu in Russian and three buttons (on the LCD key fob) (two on the spare key fob) create a two-stage warning system and a two-level door opening system.
Safety and Specifications Information
The Starline A91 alarm system in question was designed and manufactured using technological solutions that meet modern requirements. Starline alarm control commands are transmitted using a cryptographically secure encoded signal. The codes are encrypted with keys that protect vehicles from robbers and car thieves using electronic means of opening.
The radio path, designed for many channels, reliably protects against interference created by technical equipment of enterprises and organizations in large cities. The Starline A91 car alarm key fob receives messages in city conditions, from a distance of more than 1 km. The results of testing the autostart option showed a confident start from a distance of 240 m in a residential area of Moscow.
The reliability of the Starline A91 car alarm, as well as the autostart option, is influenced by several factors: the location of the vehicle parking; radio interference; voltage value of power supplies. The main advantage of the Starline A91 alarm system is stable operation for 5 years, if installation and operation are carried out in accordance with the requirements and recommendations of the relevant instructions.
The price of the Starline A91 alarm system in the Russian Federation varies - about 7,000 rubles. in Moscow, over 15,000 rubles. in the regions.
- Radio signals of the Starline A91 car alarm are transmitted with frequencies of 433.05 – 434.79 MHz;
- Designed for 128 control channels;
- The Starline A91 alarm key fob is triggered from distances in the following modes: transmission – 800 m; pager – 2,000 m; in case of using the remote control without feedback – 15 m;
- The Starline A91 car alarm operates at temperatures of -400 – +85 0C;
- The maximum current value is – 200 mA – 25 A;
- The Starline alarm operates at a voltage from 9 to 18 V;
- Control panels are activated from power sources: 1.5 V – for a remote control with feedback; 3 V – with absence.
Important functions of the Starline A91 alarm system
There is a central control unit, an engine temperature sensor, a two-level impact indicator, and a button that regulates the opening of the hood.
The intelligent interactive protection mode allows the Starline A91 car alarm to block any attempts to break in, instantly transmitting all information to the key fobs. Thanks to the latest software, the signal transmission speed (compared to earlier analogs) is increased by 20%.
The Starline A91 car alarm, created by the Starline A91 company, is designed for a wide temperature range. Thanks to this indicator, it can work both in severe cold and in extreme heat.
The Starline A91 alarm system plays an important role in vehicle security. It protects cars from theft and robbery. The Starline A91 car alarm contains self-diagnosis, comfort and service functions.
Our review of the most necessary options will help you imagine the capabilities of the Starline A91 car alarm in a little more detail:
- Security options monitor the state of the power unit. Using limit switches, the position of the doors, hood, trunk, and handbrake is monitored. The Starline A91 alarm system in question monitors the ignition circuit and responds to shock sensors.
- New technologies are being used to protect against thieves with electronic hacking tools. The Starline A91 car alarm remembers the initial state when the power is turned off and returns when the power is turned on.
- Comfortable conditions for using the Starline alarm system are ensured by silent activation and disabling of the security mode. The central locks of vehicles are turned on and off from a distance. The Starline A91 car alarm creates comfortable conditions for programming many options, promptly returning to the manufacturer’s settings.
- Particularly noteworthy in the Starline alarm system is the ability to autostart the engine. Automatic start of the power plant can be carried out on vehicles running on gasoline and diesel fuel, with manual transmission and automatic transmission. The Starline A91 car alarm implements an option using the control panel, showing the engine operating time on the screen.
- The Starline alarm locks the engine in automatic mode. The option is programmed in such a way that after 30 seconds after stopping, the engine is blocked, regardless of whether the security options are enabled or not. The option is called "Immobilizer Mode". In this mode it is impossible to start the engine.
The Starline A91 car alarm in question has many other useful options. Described in more detail in the instruction manual.
Starline A91 Dialog instruction manual.
Starline A91 Dialog installation instructions.
Scope of delivery of the Starline A91 alarm system
When purchasing a Starline A91 car alarm, you should check the completeness of the package. The complex device includes a full set of necessary products for the normal functioning of the Starline alarm system. Alarm systems Straline A91 are equipped with:
- Main processing unit and car alarm transceiver Starline A91;
- Shock and temperature sensors;
- Wires for connecting Starline car alarms;
- Safety buttons – 2 pcs. and LED indicator;
- Starline alarm system with two key fobs: three-button (main) with an LCD screen and two-button (spare). The main one has feedback;
- Two instructions - for the installation and operation of the Starline A91 alarm system.
The reliability of the Starline A91 car alarm will increase significantly with the purchase of the Starline GSM module. An important advantage of the car alarm under consideration is that the built-in telematics GSM module can work with cellular communications. The price will increase accordingly, but the Starline A91 alarm system is worth it. The connected module, regardless of the distance, provides:
- Exchange of information with the base unit.
- Submitting autostart commands from any area covered by the network.
- An obvious advantage of the Starline A91 alarm system is the ability to issue commands to turn on auxiliary options, for example, heated seats.
- Determining coordinates and tracking the location of a vehicle.
How to setup?
To control a modern anti-theft system with a key fob, it must be linked to the alarm system; this procedure is performed as follows:
- Find the Valet service key. The button is usually installed in a hidden place so that criminals cannot gain access to it when trying to break into the car. It can be located under the glove box, steering wheel, in the fuse box, under the seat or center console. Before activating the remote control, the button is pressed seven times. The engine of the machine must be turned off.
- Then start the power unit. If the binding procedure is completed correctly, the siren will emit seven beeps. This means that key fobs can be added to the alarm memory.
- After that, press keys 2 and 3 on the remote control simultaneously. Hold them until the siren beeps. This indicates successful authorization of the remote control.
- With other key fobs, the procedure is performed in a similar way. After binding, the ignition must be turned off.
The Simple Opinion channel showed in a video the procedure for activating the Chinese signaling control panel.
Starline A91 alarm connection diagram, do-it-yourself installation
StarLine A91 Dialog is a modern car security system with a radio control dialogue code “Quick Dialog” and an engine auto-start function. Thus, “Quick Dialogue” is considered a control code with individual encryption keys, which excludes intelligent electronic hacking.
Resistant to all code grabbers. In order to protect the code, we apply the dialog code algorithm perfected at this stage. Complemented by the innovative frequency hopping method. In this method, when transmitting commands, the patented OEM transceiver changes frequencies many times according to a special program during the period of each transmission.
ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"
A solution of this level, which is a method of spreading the spectrum with frequency hopping, is being used for the first time in an alarm control system and is a significant complication of all kinds of attempts to crack the code.
What is a car alarm
How to connect the 6-pin autostart connector:
- The red wire is plus “+12V” (the pink wire for the central lock).
- The yellow wire is the IGN1 output for maintaining the ignition.
- The blue wire doesn't connect anywhere.
- The black-yellow thick and black-yellow thin wires are connected as follows: cut the red wire of the ignition switch, then the thick wire to the starter, and the thin wire to the ignition switch.
- The green wire does not connect anywhere.
Ignition switch pinout:
- blue wire - +12V for the mic of the key sensor to be inserted;
- black - when the doors are open, it turns out to be a minus;
- red - +12V to the starter;
- black-blue - +12V after the ignition is on;
- green - +12V when the key is inserted;
- white - +12V per LED;
- pink - +12V from the battery.
How to connect the central locking:
- the blue wire connects to the white wire of the central locking;
- the green wire connects to the brown one;
- An activator is installed in the driver's door.
The block is located in the middle of the torpedo, right at the level of the mafon. To be able to get to it, you need to remove the side panels of the panel at foot level.
Door limit switches are connected as follows:
- The door switches need to be replaced.
- Next comes the pinout of the wires:
- driver's door - white and blue;
- rear left door - white and black;
- front right door - brown;
- rear right door - red and white.
Next, you should program the alarm for a delay of 30 seconds (polite interior lighting), as well as control of the direct operation of the engine via the “+” generator.
Tired of paying fines? There is an exit! Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.
- Absolutely legal (Article 12.2);
- Hides from photo and video recording;
- Suitable for all cars;
- Works through the cigarette lighter connector;
- Does not cause interference to radios and cell phones.
Find out details
Flaws
In accordance with consumer reviews, the following disadvantages should be highlighted:
- Over time, the control key fob begins to malfunction. The alarm may not respond correctly to commands sent from the communicator. The body of the device is fragile and may break after several falls.
- Low burglary resistance. Despite the use of a secure communication channel, some consumers note that the alarm can be hacked.
- The complexity of the initial setup of the remote engine start option based on time and air temperature.
- Poor technical support.
- Low service life of the system as a whole. Some consumers note that the alarm system fails within a year, or maybe six months after installation and start of use.
Alarm Starline A91: operating instructions, connection diagram
When installing a modern security system on your car, the owner looks at many options. A popular car alarm in the budget segment is the a91 Starline model.
The system attracts with its reliability, good price-quality ratio, rich set of functions, and the ability to program some options according to the instructions “for yourself.”
A detailed review of car alarms is located below.
The main distinguishing feature of this alarm among others in the same price category can be noted:
- the presence of a convenient interactive 128-bit control code, which cannot be penetrated by any of the known code grabbers (devices that allow reading the system code);
- ergonomic and resistant to extreme weather.
- for such a price it will be difficult to find a more frost- and heat-resistant security device for your car, and the battery capacity will allow the alarm to operate in security mode for one and a half to two months;
- you can be sure that in the signal coverage area, which is from 800 to 1000 meters, there can be no interruptions in the operation of the alarm system - all radio interference that often occurs in urban environments will be bypassed using a specialized transceiver;
- the alarm and key fob work with modern software, which significantly increases the speed of the system than on more outdated models
The functionality of the Starline A91 with auto start corresponds to all the stated distinctive features - modern software coupled with hardware properties ensures productivity and a high degree of vehicle protection.
All functions can be divided into two parts: security functions of the device and service functions (mainly associated with the use of a key fob). All service functions will be described in detail in the corresponding subheading.
Scope of delivery of the Starline A91 alarm system
Starline A91 delivery set
Starline a91 dialog comes with an extended package consisting of:
- Anti-theft system installation guide.
- Instructions for use and operation.
- Remote control equipped with a liquid crystal screen and having a feedback function.
- Battery for installation in this remote control.
- The package includes one more, spare key fob. It has a feedback option, but it does not have a screen.
- A control module that performs all functions.
- Antenna adapter with module.
- Two-level kick controller.
- Double-sided tape designed to secure the transceiver.
- Case for the main remote control with screen.
- Power cable for connecting the transceiver.
- Wire for connection to the sensitivity controller control unit.
- Button for installation on the hood.
- Service key.
- Temperature controller. Used to remotely start the power unit at a certain temperature.
- Main cable with 18-pin plug. Used to connect main components.
- Power wire for power supply and electrical circuits used to remotely start the motor.
- The cable for connecting to the central locking is equipped with a six-pin connector.
- Light.
Key Features
The security alarm has the following main functions:
- protection of openable elements of the car body from unauthorized access;
- vehicle protection using a shock sensor;
- the possibility of additional protection by installing an internal volume sensor (in the cabin);
- sending information signals to the key fob with feedback;
- possibility of operation in additional immobilizer mode;
- connecting the siren after sending signals from the sensors (in security mode);
- ensuring the protection of a car with a running engine;
- automatic start and warm-up of the power unit;
- control of standard central locking;
- searching for a car in the parking lot;
- calling the owner;
- built-in protection against accidental pressing of the control panel keys;
- possibility of installing additional GSM standard modules.
Setting the sensitivity of the shock sensor
The operating principle of a two-level sensor is based on the piezoelectric effect. It picks up the sound vibrations that occur when the car body is struck. For correct operation, it must be rigidly attached to a metal part of the body. Otherwise, it will react more to the noise around it than to the impact.
The setting consists of adjusting the warning zone and sensitivity level. To do this, you need to turn on the security mode and after 40 seconds lightly hit the body.
The sensitivity levels of the shock sensor are adjusted by two short presses of the first key fob button. Mode switching is indicated by light and sound signals. The corresponding symbols are displayed on the liquid crystal display of the key fob.
The alarm system has many modes and functions, the description of which does not fit into the article format. To fully master the security system, you must carefully study the instructions.
What to do if autorun doesn't work?
Causes and methods of eliminating problems in the event of failures in the operation of the remote start of the internal combustion engine:
- If safe autostart is not possible, there is a possibility that the vehicle does not have a standard immobilizer bypass module installed. The presence of a power unit blocker will not allow starting the internal combustion engine; sometimes the engine starts and immediately turns off. It is unlikely that you will be able to disable immo, so you need to install a bypass module. The manufacturer Starline produces special devices for its anti-theft systems.
- The microprocessor module does not read the tag from the key or communicator. As a result of a malfunction of the transponder, it will not be possible to start the internal combustion engine. There can be many reasons for its malfunction - from software failures to a dead battery in the car. You need to check the battery charge.
- When installing the anti-theft system, the alarm was not connected to the engine control wires. To eliminate this problem, it is necessary to diagnose the correct connection of the electrical circuit elements. It may be necessary to install missing parts.
- A black-gray contact is responsible for autostart on Starline A91 models. It must be connected to a tachometer or generator set indicator. If the electrical circuit is not connected, then when the internal combustion engine starts, the starter mechanism and ignition system will be activated. If the starter cranks poorly, a light will appear on the remote control screen indicating that the power unit is starting, but the engine itself will not start.
- The reason may be poor power supply to the anti-theft installation. A detailed inspection of power lines is required to detect an incorrectly functioning section.
- It is possible that when installing the car alarm, not all wires of the ignition system and starter mechanism were connected. In some vehicles, separate conductors are used to connect these elements and systems, it all depends on the car model.
- The problem may appear after installing the transponder. This is usually due to the fact that the tag installed in the key is not read by the module in the ignition switch. To fix the problem, you will need to increase the number of turns in the coil on the immobilizer bypass unit. You need to make sure that the installation of all elements was carried out correctly.
- The reason may be a dead battery on the remote control. The display of the communicator shows the level of charge of the power source, so if it decreases, the battery must be replaced.
- It is possible that you cannot configure the function as a result of a breakdown or incorrect operation of the communicator due to damage. A failed key fob must be replaced; it must first be programmed. If moisture or dust gets inside the device, it will have to be disassembled and cleaned.
- The malfunction may be due to hardware problems with the key fob. To restore functionality, it is necessary to carry out detailed diagnostics of the device. Often, reflashing the pager can solve problems in its operation.
- If the engine does not automatically start based on temperature, the temperature controller may have been installed incorrectly. You need to make sure that the device is installed correctly and connected to the electrical network. The sensor must be connected to the microprocessor module. Perhaps the controller itself has failed. This problem is more relevant for regulators that have exhausted their service life. A failed sensor must be replaced.
Reviews
I recently picked up a car and it already had Starline A91 installed. I will say this - a very advanced car alarm for the money. The feedback is very good - on the key fob it is immediately clear what is on, although there are a whole bunch of different indicators. And the display itself is well backlit, even on a sunny day it does not overexpose and remains informative. In general, I am completely satisfied with it, I think that I would install this particular system on another car.
I chose Starline A91 after much deliberation. I say that I was right. Just a great alarm for the money. There is everything you can - autostart, feedback and a turbo timer, which is very important for me. Each parameter can be configured separately, which is convenient. I drink coffee in the morning, and then I go out and get into the already warmed-up car, thanks to the autostart. What’s also cool is that you can install a GSM module and control some functions directly from your phone. It's really convenient. Especially for the price at which the Starline A91 is valued.
The functions of automobile security systems include a mode for remote or automatic start of the power unit, which allows you to warm up the engine in winter. Autostart Starline A91 allows you to turn on the engine depending on the ambient temperature or at a specified time. The user activates the service and configures the operating mode using the remote control.
Variations of the A93 series
If everything works right away, look for a fault, an electricians joke. If these requirements are correctly followed, as well as the instructions, the driver will use the autostart method described above for a long time and regularly. It seems that it makes no difference where to connect what, but starting from version 3. Minimum set: heat-shrinkable special casings that shrink in cross-section when heated with an industrial hair dryer or lighter, they are better than electrical tape with a cross-section of 3, 5 and 8 mm, 1 meter long each; a set of multi-colored copper stranded conductors in PVC insulation with a cross section of 2, 4 and 6 sq. Location and assignment of contacts on the central block Contact layout on the main block Starline A Necessary for correct operation of the starter and compliance with the eco mode; F11 - options for monitoring engine operation. They can be connected, for example, to a crankshaft sensor, without which the engine will not start. A wire with a crimped terminal must be connected to it. Connection to CAN LIN buses Connection to CAN and LIN buses is carried out according to the diagram. If the CAN bus does not support central locking, you should use the following diagram. The installation diagram for low-current control is given below. The diagram for switching on power control. The StarLine A93 system has a circuit for blocking the engine in case of unauthorized starting. Usually the supply voltages are blocked supplied to the fuel pump, injectors, and ignition coil. It consists of the following sections: approximate locations for installing alarm elements installation map, here the manufacturer gives detailed recommendations on where to install this or that unit so that the car is fully protected, and additional functions can effectively start the engine automatically; connection procedure, there are detailed diagrams according to which the car owner, if he decides to carry out the installation himself, is obliged to connect all the elements together after their installation, for example, the engine start sensor; programming procedure, here it is indicated how to program the security system, set a personal PIN code, program the interface. After completing the electrical installation work and setting up the security system, you can use plastic clamps to combine standard and non-standard wiring into a single clamp, thereby complicating the work of possible car thieves. How to use autostart Starline A93 In order to use autostart correctly, you need to study the operating instructions for the user.
Engine temperature sensor 5 is mounted on metal parts of the cooling system, preferably near the thermostat in close proximity to the standard car coolant temperature sensors. First, connect the minus ground, the black conductor of the second connector. If everything works right away, look for a fault, an electricians joke.
All main connectors of the central unit are located in a row on one side. The service button and sensitivity and tilt controllers are installed in the cabin. Nevertheless, it copes with its main task quite well. Limit switches are fixed to the hood or trunk.
They are written for professionals, but in the usual language accessible to a dummie. They can be connected, for example, to a crankshaft sensor, without which the engine will not start. If the sound signal is activated for a long time, the siren may overheat and fail, so it is better to include an additional 5 Ampere fuse in the siren's electrical circuit. First, connect the minus ground, the black conductor of the second connector. Do not mount the engine temperature sensor in close proximity to the exhaust manifold. Overview of the StarLine A93 alarm system Range, installation, functions
