The dashboard of Granta or Kalina can be called modern. This can be confirmed not only by its appearance, but also by the use of LEDs, rather than lamps, to highlight readings and indicators. Let's look at how you can change the standard green color of the instrument panel backlight.
Which LEDs to choose for instrument panel illumination
To highlight the readings in the Granta or Kalina instrument cluster, green SMD-3528 LEDs are used. Instead, you can use SMD LEDs of different brightnesses. Here are the most commonly used:
- very bright SMD 5050 (luminous flux - 15 Lumens);
- bright SMD 3825 (brightness 7-9 Lumens)
- medium brightness SMD 3528 (about 5 Lumens);
- medium brightness SMD 3028 (about 5 Lumens);
- not bright SMD 3020 (about 4 Lumens);
- not bright SMD 3014 (about 3 Lumens).
The numbers after SMD mean the ratio of width and length, for example, an SMD 3528 LED has dimensions of 3.5 mm by 2.8 mm. You can buy everything you need on AliExpress (see catalog).
The approximate difference in LED brightness is shown in the photo:
Please note that using very bright LEDs to illuminate the instrument panel, reading readings in the dark may not be comfortable (they will dazzle). In this case, you can reduce the brightness by tinting the dashboard with a film (we select the light transmittance to taste). We recommend using SMD LEDs with a luminous flux of up to 5 Lumens for tuning the instrument panel.
How to change the color of the instrument cluster illumination
1. Use SMD of the desired color. For example, use white LEDs to illuminate one part of the panel, and blue LEDs for the other.
2. Use a light filter (electrical tape or film of different colors) together with white LEDs. We stick it on the desired area, as a result of which we get the illumination of the desired color. To change the color, you do not need to use a soldering iron, just disassemble the instrument panel and stick a film of a different color.
It is worth noting that the hands have an orange coating. To change the illumination of the hands, wipe off the varnish with nail polish remover and, if necessary, apply a new varnish of a suitable color. Another option is to use LEDs for the arrows of the desired color.
You can change the backlight of the screen (display) not only by replacing its LEDs, but also by turning the film over. First, we tear off the film from the display, clean the remaining adhesive with a solvent and glue the film on the back side. This results in an inversion of the panel display:
3. Use RGB-SMD LEDs. If you want to change the backlight color at once. In this case, you will have to additionally output switching control.
Tuning the instrument panel of Grant and Kalina 2
| To change the backlight of the instrument panel of Grants or Kalina 2, you will have to try, the old way (as on the VAZ 2110 or Priora/Kalina) will not work to change the backlight due to the different design of the part. However, if you know how to hold a soldering iron in your hands, tuning the instrument cluster is not a problem. |
You will need : disassemble the instrument panel, prepare a soldering iron with a narrow tip and a desoldering pump.
After the instrument cluster board of the Lada Granta or Kalina 2 (they are the same), we check the display. If it turns out to be soldered (soldered legs are visible, not holes), then we desolder it using a desoldering pump so that the display legs (iron soldered antennae) move freely in the seats.
As a result, we have access to all the dashboard LEDs:
- blue - display LEDs
- red - arrow LEDs
- white - scale LEDs
- green - low beam indicator LED
- purple - high beam indicator LED
We replace the necessary LEDs with our own ones of a suitable color and check their operation before assembling the instrument panel; to do this, just connect the board to the cable and turn on the ignition.
When reassembling, the display antennae must fit exactly into the grooves, otherwise they will break and you will have to build them up with copper wire. Before installing the device, it is recommended to glue the panel with anti-squeak.
Before tuning the instrument panel of Grants or Kalinas of the 2nd generation, once again evaluate all the pros and cons. During the modification process, there is a possibility of breaking the instrument panel. In addition, such tuning of the instrument cluster may bring problems with the warranty.
Source
Do-it-yourself dashboard overexposure
You will need: remove and disassemble the instrument cluster, SMD LEDs (unsoldered from LED strip or LED lamp), soldering iron.
The process of replacing LEDs on the instrument panel board consists of unsoldering the standard SMD LED and soldering a new one in its place. During such tuning, there are several important points to consider:
- take your time so as not to damage the conductive traces of the board;
- observe the polarity (SMD LEDs have a bevel on one side, install a new LED in the same position);
- do not overheat the LEDs; high temperatures may cause them to fail;
After soldering the required LEDs, it is recommended to check the backlight. To connect the instrument cluster at home, you need to apply +12V to pins 19 and 21, and ground to 17. You can also verify that the installed LEDs are working properly using a multimeter in “tester” mode, connecting the probes to the LED according to the polarity (red probe is plus) :
If all LEDs are installed successfully, reassemble in the reverse order. Relighting the instrument cluster of Grants or Kalinas is a great way to make your car more individual and stylish. It is noteworthy that there are a lot of options for implementing such panel tuning, but which style suits you best? Participate in the survey, share video materials and photos of your improvements.
Let us remind you that the website presents other modifications to the instrument panel, for example, you can reflash it and install an outside air temperature sensor.
Photo: logbook ARIST0KRAT and serg156
Keywords: instrument panel Lada Granta | dashboard of Lada Kalina | interior lighting for Lada Granta | interior lighting for Lada Kalina | torpedo Lada Granta | Lada Kalina torpedo
0 0 0 0 0 0
Share on social networks:
Additional recommendations
Already in the base, each Lada Granta is equipped with metal protection for the power unit. Of course, this option also provides some protection, but it is better to buy a higher quality part. The liftback's incredible ground clearance doesn't help prevent damage when overcoming road obstacles. Reviews from owners show that tuning of the liftback in this case is carried out using the appropriate spare parts for the Lada Kalina model.
Don't forget to install fender liners (they are also called “lockers”). They will provide reliable protection of the body from dirt and moisture, which will greatly facilitate the fight against aggressive processes. Some motorists believe that fender liners interfere with normal ventilation of the body space, as a result of which the metal begins to rust before our eyes. But in reality, everything depends on the quality of installation of the cabinets. If you do it right and don't control your body again, you will benefit from it.
The basic equipment of the car includes 14-inch steel wheels, which spoils the whole picture. And the body seems very “heavy” to them. You can solve the problem by installing wheels with a diameter of 15 inches. And it will be much easier to overcome obstacles along the way. In some cases, tuners also use 16- and 17-inch rims. True, you will have to fork out more for low-profile tires. This optimization option for Lada Granta is relevant only for residents of megacities with good roads.
Electrically adjustable and heated exterior mirrors are no surprise, so they should be installed by default. Turning on the heating is connected to the heated rear window button, so this function does not require additional attention.
One of the great tuning opportunities is painting a car with liquid rubber. “Plastidip” is a unique opportunity to change the appearance of a liftback or any other car. Now this optimization option is very relevant. Read more about the benefits of Plasti Dip in the article linked above.
Painting is an integral attribute of a modernized car. However, we should not forget that the film cannot be used on headlights, because this directly affects the safety of the car. If you decide to paint your taillights, we recommend that you read our recommendations.
The Lada “Granta” liftback is a new car produced in a wide range of technical specifications. The improved transmission, modified suspension, engine range and standard gearboxes continue to provide user satisfaction. That is why tuning Lada Granta Liftback mainly concerns the exterior of the car.
However, adherents of technical improvement of cars have something to do with the Lada “Granta” liftback.
Initial engine tuning
After buying a brand new car, you shouldn’t immediately start rebuilding the engine. Let your grant come in, adapt to the workload, work in pairs. Perhaps after running it in, you will find the ideal dynamic characteristics of the car! Or there may be manufacturing defects that are covered by the warranty. However, in any case, something needs to be done.
A zero-resistance air filter makes it easier for the car to “breathe.” The increase in oxygen in combustion chambers with such a filter is 3-6%, depending on engine speed. Power also increases proportionally.
The exhaust tract tuning kit provides a few percent more power to your Granta. An exhaust manifold with enlarged pipes of the 4-2-1 formula facilitates ventilation of the cylinders and reduces resistance to the movement of exhaust gases.
Finishing the job is a pair of sleek, shiny mufflers with engine tailpipes. With them your car will become more beautiful and faster!
Pay attention to the tuning of the Lada Granta Liftback chip! Reflashing the car's computer allows you to optimize the interaction between the driver and the car. After reflashing, the car will best meet your expectations and driving style. At the same time, fuel consumption will decrease slightly and power will increase significantly.
An electronic accelerator pedal is a useful feature, but not all Lad models are fitted from the factory. The electronic pedal, installed before chip tuning on the Lada “Granta” liftback, gives the control unit the ability to accurately respond to the driver’s commands. Using the electronic pedal, the driver can measure the force generated by the engine with maximum precision. Which still has a beneficial effect on fuel consumption!
Improved models of electronic pedals include a mode switching control unit. By equipping the Granta with a similar device (see Article on the page https://www.autodela.ru/main/top/diy/lada-granta-tuning), you can change the operating mode of the car control system according to your needs.
Deep tuning of the liftback of the Lada Granta engine may include the installation of a forged piston unit, boring the cylinder, “feeding” the engine with a turbine and a nitrogen accelerator. It is best to carry out such procedures in combination, since the turbocharger of a production engine greatly increases the risk of piston destruction under extreme loads. Even installing expensive forged parts on the piston assembly without increasing the performance of the fuel system does not make much difference.
It should be noted that an increase in engine power entails the need to strengthen the braking system, improve the transmission and suspension. Otherwise, the liftback will not have to enjoy the champion speeds of the Lada “Grant” for long.
External tuning of Lada "Granta" liftback
Tuning the exterior of the Lada “Granta” liftback can begin with the wings, replacing standard metal body parts with more expressive ones made of durable ABS plastic.
By installing polymer mud flaps, you will not only improve the appearance of your car, but also get rid of worries about fighting corrosion. Plastic, as is known, does not rust and withstands low-intensity shock loads well. The trimmed air intake line of the tuned wing will add sporty agility and healthy aggression to the Lada Granta Liftback.
While future owners of the updated Lada Granta scrupulously study the car’s exterior and discuss the features of the standard equipment, fans of automotive uniqueness do not stand aside. “Faces are not an ordinary expression” - this is what every car needs, including the Lada Granta, a cute liftback from birth!
Various options for modeling the front bumper and radiator grille, made in the studio by Lada Granta Liftback tuning masters, already today surpass the laconic factory design!
The "I'm a Robot" front bumper is especially popular among fans of a dynamic driving style. After receiving the new body kit, the front of the car becomes expressive (and even a little flashy), expressive and aerodynamic.
Thanks to the large air intake located in the center of the bumper, the engine and front brakes receive the additional cooling needed during active driving.
Even more worthy are the options for modifying the front body kit, made by automotive design professionals and giving the middle class car decent strength. “Narrowed Eyes” gives the impression of philosophical sophistication and unshakable calm. But it is precisely these qualities that road users lack so much in every corner of our country!
In the white version of the body, the car with the same shape as the radiator grille takes on a somewhat sleepy look, but large structural elements improve the perception of the design. The serene "look" gives the car an air of interest and openness. A positive attitude is in every feature of the white Granta Liftback!
Useful little things shape your appearance
In general, the design of the Lada “Grant” liftback was designed by the designers quite carefully. The silhouette of the model compares favorably with the sedan that preceded it. That is why do-it-yourself Lada Granta Liftback tuning often affects small but important elements of the car’s appearance.
On the rear edge of the trunk lid there is a small sponge spoiler “like a native one”. By slightly increasing the size of the body, the tuning part greatly improves the aerodynamics of the rear of the car and really helps keep the rear window clear. Note that this addition fits perfectly with the rest of the body elements and with the design of the model as a whole.
A visually pleasing and undoubtedly practical addition to the Lada Granta Liftback tuning: elegant roof rails, specially designed for the new body. There is no need to drill into the roof to install Grant roof rails! The tuning parts are offered in two colors - silver and black and are designed to be installed in the usual mounting points of the trunk.
By purchasing and installing durable aerodynamic bars yourself, you can easily transfer any long load up to 50 kg to the roof.
Let's play big! Let's sing at the top of our voices!
A music lover buys a car and gets a mobile concert hall. To be more precise, the Lada “Grant” Liftback tuning turns it into a concert hall - but the craftsmen have nowhere to go! The car is spacious with enough space for equipment. Converting rear doors into speakers is expensive and difficult, but when done responsibly, the results are impressive.
Widening the track of a production car is no easy feat: it requires serious work on the suspension and ride. Wheel arch liners turn an ordinary car into a racing car. The "multiplied" and modified exhaust pipe air intakes are similar to the nozzles of a spaceship. The elegant bumper combines all the design and engineering elements of a car. This is what complex tuning means - the car sounds and races like a rocket!
And although the black and red tongues of the painted flames look more like camouflage, the outline of the front of the car turned into a clenched fist, quickly penetrating into space.
Sports seats, ergonomic steering wheel, multi-point seat belts are a big plus! However, the milky white curved surfaces at the front of the cabin are too distracting (if not annoying).
But we are not too strict with amateur tuning masters - the Lada Granta Liftback is a new car, there are still few examples of modifications that are successful in all respects. But it’s worth listening to the experience of determined comrades!
Taken together, they speak of the need to modernize the sound insulation of a production car. The bulky body echoes the unevenness of the road. Such sensations, as testers describe, are similar to sitting in an iron drum.
We have repeatedly touched upon the issues of eliminating parasitic noise and unnecessary vibrations inside the machine. Use the tips from the article on the page https://www.autodela.ru/main/top/diy/kia-cerato_shumka and your Lada “Granta” liftback will become even more comfortable!
Let's take care of what's important
All bags are equipped with steel engine protection as standard. It's better than nothing, but once you have a better shield, don't miss out! Decent ground clearance (20 cm for models with manual transmission, 16 cm for cars with automatic transmission) is not a guarantee against stones and other obstacles on the road. According to reviews, the engine protection and tuning of the Kalina gearbox are ideal.”
Wheel arches (or wings, in Russian) are an important part of a fast car. The polymer material absorbs all impacts from stones and splashes of dirt and, as a result, protects body parts from abrasion and corrosion.
There are concerns that the fender liners interfere with the ventilation of the body space so much that sometimes the rusting of the metal accelerates. Such fears are unfounded. Quality cabinets that install without self-drilling the cabinet are useful—and sized.
I agree that the 175/70 R13 Standard wheels look thin at times and the fairly smooth body makes it feel heavy.
It is very reasonable - especially from the point of view of making it easier to roll over uneven roads - the installation of fifteen-inch wheels,
. or even sixteen to seventeen inch wheels with low profile tires. True, such a decision is justified only if there are good roads with ubiquitous high-quality surfaces.
Exterior mirrors with electrically adjustable, heated and bi-directional turn signals are a dictate of the times. There can never be too much light signal! Installing such mirrors with your own hands is not difficult. The heater switch is synchronized with the rear window defroster.
When purchasing, make sure that the rear LEDs do not blind the driver, otherwise, by turning on the turn signal on the left, you will be forced to block the too intense light of the colored LEDs.
Let's think about the beautiful
Is your Lada “Granta” Liftback black as night, and its body shines like a resin mirror? Place headlights with a black background between the reflectors and it will add seriousness to the appearance of the car.
Once upon a time in Germany it was considered chic to cover the roof of a car (no matter what) with black leather, simulating a convertible. In the new century: new gadgets! Agree, the black glossy film on the roof of the white Granta is cool!
Gives freshness to the same black film on the glass.
Black film is not always appropriate. No matter how impressive the Lada Granta Liftback looks, sticking the headlights in black is nonsense! One fine day there will not be enough light to notice the obstacle and react in time. The result is an accident!
Some people also like to reduce the play to just millimeters. It’s hard to agree with this method of tuning the Lada “Granta” Liftback.
Granta is a new model that can please the owner with undeniable advantages over representatives of previous generations. If you carry out tuning in Grant's liftback, you can get an individual, “sharp” car for a specific owner. Tuning a car is not only about painting or replacing door handles, but also about complex adjustment of many parameters. If the internal elements of the Grant are considered sufficiently developed, most owners stop only at tuning the external components. This can be seen from numerous photographs.
