Starline a93 programming instructions: reset to factory functions, adjust siren volume, auto start

There are updates in the post below.

Good afternoon, dear ones.

I had a Starline A93 alarm unit lying around, which once worked properly, but one day stopped responding to the “lie down, fetch” commands from the remote control. For a long time I drove with no more than a standard central locking system. The thought popped into my head, is it possible to restore its functionality? Will rewiring her brain help?

Preface on how it died: When I checked its functionality, there were glitches when working with the remote control (from the 10th time, for example, it was armed, disarmed, and then stopped responding altogether). The batteries on the remote are good, but they don't want to interact. It enters the programming mode (press the service button 5 times and turn on the ignition, 5 beeps will be heard), but it is not possible to manage the settings.

I decided to try returning the factory settings and updating the software. To do this, you need a special cable from Starline, which is also a regular USB-UART adapter to CP2102. I ordered from Ali for 50 wooden ones, we are waiting.

And now a question for the experienced. Will a software update help? _____________________________________________________________________________________ UPDATE: I finally received the USB-UART adapter and started the path to updating the software.

I was tormented by doubts that the computer and the program would see the module, but! Thank heavens! Everything connected perfectly and we managed to successfully update the firmware.

Before the update, I made a copy of the settings (but still needed to screen everything) and updated the software. After updating the software, the program asked to reset all settings to “logical”.

The alarm began to respond adequately to commands, but at the moment the connection with the central locking system (central locking) was lost. Those. I set it to security - the doors do not lock, unless you block it using the car's standard remote control. Further, if I set the security system and lock the doors and set it to autostart, then when the car is running, it disarms, but does not open the locks (I press “open doors” on the standard remote control) until the autostart timer passes and the car turns off. Only after this is it possible to unlock the doors and continue driving.

Question for experts: where to dig? Is there something in the alarm settings or is the contact from the central lock missing somewhere?

______________________________________________________________ UPDATE 2: After a night of inactivity, the autostart again did not want to work and wrote OST on the remote control. Damn her! Let's dig further.

UPDATE 3: I studied Starline support and found some interesting information: “After giving a command from the key fob to start, does the car make attempts or does the OST immediately light up?” nothing happens, just an error

In this case, this inscription indicates that the security zone was violated after the program neutralization was completed. For example, the door opened. Since after arming the car and disarming it, even if it is operating in Turbo mode, preparation for autostart is canceled.

It turns out that if, after arming the car, the door was opened and armed again, then autostart will not occur. And you need to start the car again with the key and put the parking brake on.

This kind of crap is only available with manual transmission.

UPDATE: I redid the installation at the alarm installation points and everything returned to normal.

Alarm Starline A93 reset to factory settings

key fob The key fob display will constantly display the icon: When the immobilizer mode is active, the engine will be blocked automatically 30 seconds after each ignition is turned off. Turning off the engine lock in immobilizer mode Press button 2 of the key fob; OR press the service button and hold it for 2 seconds. Important The average battery life is:

for a key fob with an LCD display - from 2 to 6 months, for a key fob without an LCD display - from 1 to 12 months.

How to set up Starline A93 key fob: programming table and instructions

The minimum level is 01, and the maximum is 14.

When set to 00, the first sensor level is disabled.

• Select the value by short pressing K2 and K3.
• Press K3 long and short, which will allow you to proceed to setting the second level of the sensor.

1 light signal will follow. The factory value of the second level is set to 05. The remaining values ​​are similar to the parameters of the first level. Exit the programming mode by long and short presses on K3. The car will give a triple signal with a light alarm and a double signal with a siren. A melody will turn on on the key fob. Check the level by lightly patting the roof car by hand (with the system turned on).

If the setting level is insufficient or excessive, make adjustments in a similar cycle. You need to adjust the sensor until it starts to work stably from light taps with the same force. Meaning

How to reset the StarLine A91 alarm system to factory settings

If you reset the user settings, everything will need to be restored, so it is better to resort to this measure as a last resort.

Settings may not be reset for the following reasons:

1. an error in the operation of the StarLine control unit: it may not respond to pressing the key fob keys even during an emergency attempt; to troubleshoot the problem, you need to reflash the system;
2. electronics malfunction (damage to the power circuit due to a short circuit or other interference): with this malfunction, the system previously periodically did not respond to commands coming from the keys, and the siren could turn on for no reason.

To resolve these problems, it is better to contact a service center.

A63 equipment

The standard Starline A63 set includes only a central unit, a transceiver module, a locking relay, two key fobs, instructions and an installation kit (screws, clamps, hood button). Siren is purchased separately.

Expansion of functionality is possible with the following modules:

• The autostart module (standard for alarm systems of this generation) is connected via a cable to the central unit. Its settings adapt the autostart system to cars with a traditional ignition key, with a start-stop button, and so on. However, due to the fact that both the hardware and software of the A63/A93 family of alarms have been repeatedly upgraded, the manufacturer guarantees autostart operation only on A63 alarms that have a serial number starting with the characters AX3. Otherwise, the unit may not support working with the module both software and hardware (a number of elements on the board are missing).
• The StarLine GSM-Master module is required to implement telematics capabilities (alarm notification via mobile phone, alarm control via a mobile application and SMS commands). At the same time, the vehicle’s coordinates are determined only from LBS 9 base stations of the cellular network), therefore it gives satisfactory accuracy only in cities densely saturated with cell towers.
• The StarLine 2CAN-2LIN Master module is a universal expansion board for integrating alarm systems with digital buses of domestic and foreign cars.
• StarLine GPS-GLONASS-Master is necessary to increase the accuracy of tracking vehicle coordinates.

When installing the 2CAN-2LIN module, the car owner will receive expanded functionality - indirect engine start blocking without physical relays, owner authorization using a PIN code entered from the car's standard buttons, SUPER SLAVE mode, when the alarm is controlled from a standard radio key without weakening the degree of protection of the car.

This is interesting: How to change the battery in an Audi key

Reset Starline A93 to factory settings

channel No. 1 2+1 serial

1. Double short press of the third button enables or disables the tilt/motion sensor.

Setting up the key fob Contents

1. 1 Setting up the key fob
2. 2 Programming security and service alarm functions

A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. Changing programming parameters or resetting to factory settings may

Starline a93 how to return factory settings

When installing the system, the circuits responsible for starting and operating the engine without a key in the ignition must be connected.

To implement autorun, the user must provide the following startup conditions:

turn off the ignition; close all doors and covers (to activate the limit switches); engage the parking brake; perform the procedure for setting neutral or put the automatic transmission lever in the “P” mode.

Procedure for setting the function: If option 12 in the programming table is set to automatic “logic neutral” mode, the user must apply the handbrake and turn off the ignition system. If the option is configured from the remote control, after raising the handbrake, press the second button on the remote control.

If the function is programmed to apply the brake, then no action needs to be taken after lifting the lever. The remote control will play a melodic signal, the power unit of the machine should remain in a running state.

How to reset the Starline alarm system

The process of action will be as follows.

• Insert the key and turn on the car ignition.
• Turn off the ignition. The alarm will emit ten short sounds and flash the headlights, notifying the owner that the car has entered a special reset mode.
• The program is exited by turning on the ignition again. The transition also ends automatically if the driver does not press anything for 10 seconds. To confirm a successful outcome, the car will flash its side lights five times and the key fob will make a corresponding sound.
• Press the Valet service button 10 times.
• To reset all set parameters, press the first button on the Starline key fob. A short melodic signal tells the driver that the mode reboot has been completed.
• Press the Jack key one more time and hear an additional system signal.

What to do if you can’t reset the alarm?

Alarm Starline A93 reset to factory settings

Briefly press button 3 of the key fob: key fob

1. a melodic signal will sound,
2. the vehicle battery voltage value will be displayed for a short time,

then the temperature inside the car, and then the engine temperature (the thermometer icon to the right of the car is a sign of the engine temperature indication).

* Engine temperature control is only possible when an engine temperature sensor is connected to the StarLine complex. Manual transmission, completion of "neutral" on. protection of manual transmission, completion of “neutral” on closed.

manual transmission doors, completion of “neutral” when closed.

Differences from A91

The A91 alarm system is the predecessor of the A93 generation; it is currently obsolete and discontinued.

Model A 91 does not have as much functionality as the A93. The A91 alarm system does not have such functions as:

• authorization by PIN code;
• communication channel control and self-diagnosis;
• “smart” shock and tilt sensors.

On the A91 it is impossible to use the functions of keyless entry or hidden protection via CAN+LIN/2CAN+2LIN buses. The lack of protection via can-lin tires makes it easier for an attacker to find and deactivate the alarm while inside the car.

The A91 was a good progenitor, it is crypto-resistant and reliable, it has the ability to install a telematics module (GSM/GPS), but there are no advanced functions necessary for user comfort, such as keyless entry.

Reset Starline a 93 settings

They will help protect your car from theft by blocking the engine or ignition, and will notify you of an attacker’s attempts to enter the cabin. Advanced alarms such as Starline B9, A9 or A91 have a number of additional functions.

• The engine is able to start independently according to the mode depending on the ambient temperature, according to the set clock or alarm clock. This will allow you to warm up the engine and interior using a button immediately before leaving the apartment.
• If you have a Starline GSM alarm module, you can configure additional parameters.
• The owner can set a timer mode in which the turbine will continue to operate for some time. This is beneficial for the longevity of the assembly.

Info Here you can set the current time, alarm time, enable/disable alarm functions, countdown timer and enable/disable it. Here

Reset Starline A93 to factory settings

key fob Ignition Icons Security Control of security functions Enable security (with sound confirmation) 1short off.

any except off Disarm security (with sound confirmation) 2short off. any except incl. Arm the system (without sound confirmation) 1+1consecutive.

1double off any except off Disarm security (without sound confirmation) 2+2consecutive.

2double off any except incl. Enable silent security mode 1+2 sequential. - off any except off Cancel alarms 1short switch off.

How to set up a Starline A93 alarm

Control is performed by the second (more) and third (smaller) buttons.

To save the setting, you need to press the same key combination as to enter the menu. To switch to the manual function selection mode of Starline A93, you need to hold down the second or third button for 3 seconds. By short pressing button 3 we move the cursor to the right, and by short pressing button 2 we move the cursor to the left.

In this menu, you can select the functions of starting the car engine by alarm clock, by timer, or by temperature (buttons 1,2,3 respectively).

The fourth point is called “Service mode”, which is set to transfer the car to a service station.

The "Turbo" icon is intended for vehicles equipped with diesel engines with a turbo timer. Enabling the “Auto” function allows you to automatically arm the car 10 seconds after all doors are closed. “Immo” mode, or immobilizer - in this mode, the car engine will be blocked from unauthorized starting 30 seconds after the ignition is turned off, and it can be unlocked by briefly pressing the second button of the key fob.

Options

• Control module. The block is used to receive, process and transmit signals.
• Transceiver module. Receives impulses from the control panel.
• Blocking relay. Used to prevent the car engine from starting in the event of an unauthorized break-in or an attempt to steal a car.
• Two control panels. One of them is the main one, it is equipped with a screen. The second is additional, it does not have a display, only buttons.
• Service manual for installing and configuring the system.
• Installation kit. It includes mounting wires, hood button, clamps and screws.
• LED indicator is designed to monitor the security status.

Please note that the package does not include a siren; it must be purchased separately.

Starline a93 reset to factory settings

— Opening of locks K2 (short) K2d (short) On.

Info You can programmatically set the response delay time, as well as the duration and number of pulse signals when the channel is turned on. The Starline A93 alarm system is programmed:

1. setting up the main block using tables;
2. additional configuration of the CAN bus.
3. cursor method;

When setting up using the cursor method, you need:

• Select the required mode by pressing K1. You can move the cursor to the left by pressing K2, and to the right by pressing K3 or K4.
• Press and hold K2 or K3 to turn on a double melodic signal.

The left icon in the bottom row (number 1 in the diagram) will activate and blink on the screen.

To program the block you will need to follow the steps:

• Turn off the ignition and press the setting button five times.
• Turn on the ignition.

The system will sound five siren signals, and the melody in the key fob will turn on.

Alarm use

Instructions for operating and using the anti-theft system with auto start are given below.

The AutoAudioCenter channel made a video that describes all the main functions of the Starline A63 alarm system.

Main alarm unit

The control module is equipped with a cabin temperature controller; it is used to warn the car owner about a possible fire.

On the block body you will see:

• a sticker with the firmware version number;
• a hologram indicating that this is an original product;
• sticker with the serial number, it must match the combinations indicated on other elements of the car alarm.

When installing the unit, remember that its functionality is affected by high temperatures and humidity. Therefore, it must be installed in a dry place.

Control key fob

Let's look at the basic commands that control various functions of the anti-theft installation:

• To activate the security mode, briefly press button 1 once, and to disable it, press button 2.
• To put the machine on silent protection, press button 1 twice in succession; to turn it off, press button 2 twice in the same way.
• To interrupt the alarm signal, briefly press key 2.
• To activate the anti-robbery function, you need to hold down keys 1 and 3 until a melodic signal is heard. To turn off the mode, briefly press key 2.
• To disable the built-in sensitivity controller, press key 1 twice. The controller is turned on in the same way.
• If an additional sensor is used, then to activate and deactivate it, double-click on key 2.
• The tilt controller is activated and deactivated by double pressing button 3. The function is performed when the security mode is on.
• When the security mode is disabled, you can successively press button 4, this will activate the function of adjusting the sensitivity of the tilt controller.
• If you briefly press button 3, the system will send a request to check the status of the anti-theft system. The car owner will receive information about the protection of the car, the voltage supplied by the battery, as well as the air temperature in the cabin.

Alarm Starline A93 reset to factory settings

Therefore, the temperature displayed on the key fob display may differ from the actual temperature in the cabin, as it depends on the location of the unit. The engine temperature displayed on the key fob display may differ from the actual engine temperature, as it depends on the location of the temperature sensor.

Temperature measurement range: from - 40 0C to + 990C. If the temperature is outside this range, then the indication on the key fob display will look like this: Options for displaying information on the key fob display: Temperature below - 40°C Temperature sensor closed Temperature above + 99°C Searching for a car in a parking lot You can use this command to search car in the parking lot.

No later than 2 seconds after releasing the button, turn on the ignition. car

1. The engine lock will turn off.

Service functions of the complex Monitoring the condition of the vehicle, battery voltage,

Starline a93 alarm system with auto start, installation and configuration instructions. Owner reviews and own experience of using starline a93

StarLine A93 is equipped with a shock-resistant key fob with an internal protected antenna.

The built-in color LCD display displays the clock, timer, vehicle interior temperature and charge level of the AAA battery used. Operation is ensured in the temperature range from -50 to +85 °C. Communication range is guaranteed at a distance of up to 2000 meters.

Description Starline A63

The Starline anti-theft system works with a non-scannable dialogue code, which eliminates the possibility of signal interception by attackers. One of the main features of the alarm system is the presence of an intelligent automatic start function for the power unit. Its use allows for remote start of a machine engine at a certain time or on command.

The Starline anti-theft system is based on the fourth generation platform. The A63 signaling differs from previous models in the use of light signals, as well as power relays; they are designed to control the central locking.

The developers of the security complex have introduced new functions aimed at ensuring vehicle protection and more comfortable operation. Additional modules LIN, 2CAN, GSM and GPS are used. This has significantly increased the capabilities of the anti-theft installation in terms of vehicle monitoring.

The AutoAudioCenter channel has made a video that provides a detailed overview of all the features and functionality of the Starline A63 alarm system.

Technical features

Below are the features of the anti-theft installation:

• Super Slave. Reliable vehicle protection is ensured thanks to three security lines. When a signal is sent, the impulse undergoes Dialog identification, verification of the standard system, and also by the immobilizer.
• Availability of telematics. Thanks to the GPS GLONASS and GPRS-GSM modules, the car owner can determine the location of the car at any time by receiving coordinates from the signaling system. Thanks to telematics, some car alarm functions can be controlled remotely.
• The interactive protection mode protects the signal from interception by scanners and code grabbers.
• The developers have implemented effective protection against interference. The anti-theft system can function unhindered in harsh city conditions where radio interference prevails. Protection is provided by a 128-channel transceiver.
• The package includes tilt and shock controllers. It is possible to remotely configure sensors. If configured correctly, the controller will be able to detect the evacuation of the vehicle, as well as its jacking.
• Extended temperature range. The anti-theft system operates reliably in harsh climatic conditions. The temperature range is from -50 to +85 degrees.
• High energy efficiency. The battery can remain charged for up to two months when the security mode is activated. This is ensured thanks to modern technologies and software solutions that the developer used to create the alarm.
• Availability of CAN+LIN interface. This allows for quick, convenient and safe installation of the anti-theft system on modern cars equipped with such tires.
• It is possible to control the anti-theft installation via a smartphone. If a GSM control module is installed on the car, the car owner will be able to control the main signaling options, as well as receive status alerts in the form of messages on a mobile device.
• Reliable control of the communication channel. This allows you to check the location of the remote control, provided that it is within the range of the signal transmitter.
• The package includes a shockproof control panel. During its development, an innovative design is used to ensure protection of the key fob from physical influences. The remote control has an ergonomic design and is equipped with a built-in antenna.
• Flexible communication channels. You can configure the activation of the hazard warning lights, the folding function of car mirrors, etc.

How to set up the Starline A93 alarm key fob

Sound and light signals are triggered, scaring away potential intruders. It turns off by briefly holding the second key.

You can lock all buttons on the Starline key fob to prevent them from being pressed accidentally.

You need to press the second and fourth together.

Unlocking is done by simultaneously holding down the first to fourth key.

• There is an additional option to disable or enable the shock sensor, which occurs when you press 1 button twice. Once held again, it will activate.
• You can turn off the tilt sensor by pressing key number three twice.

In addition, the Starline A93 alarm system has a lot of other functions.

• Security actions. The system turns off the ignition, locks the doors and hood lock. This prevents not only car theft, but also battery theft.
• Automatic heating of the power plant.

Installation of Starline A63

Installation of the anti-theft system is carried out as follows:

• Install the control unit. The module should be installed in a place hidden from intruders. We recommend placing the unit behind the dashboard or glove compartment to ensure its safety. To securely fix the device, use self-tapping screws. The unit must be securely fastened to prevent it from vibrating.
• A siren is mounted in the engine compartment, which must be purchased separately. To prevent premature failure of the device, place it away from the motor. High temperatures will damage the siren.
• The transceiver is mounted on the windshield. To prevent interference during the transmission of pulses, the adapter must be placed at least five centimeters from metal parts. Here, in the area of ​​the windshield, you should install a diode indicator. It should be visible from the street, since the light bulb is used to monitor the status of the alarm.
• Install the sensors included in the kit.
• At the final stage, the wires are laid and connected to the control module. All electrical circuits must be laid under the interior trim. Secure them and make sure that they will not be affected by moving mechanisms during operation. After connecting, adjust the sensitivity of the shock sensor.

Programming the Starline A93 key fob

According to 2017 data, it was 6-8 thousand rubles.

1. set of heat shrink tubes.
2. tester for checking quality connections to the Can or Lin bus;
3. drill with drills;
4. an industrial hair dryer capable of heating temperatures up to 400 degrees Celsius;
5. a set of tools including side cutters, screwdrivers, knives and a soldering iron;

Below is a detailed video on how to do this yourself. Instructions for setting up the remote control Before you begin programming the Starline A93 alarm functions, you need to “bind” all the key fobs.

1. The first two buttons on the key fob are pressed simultaneously.
2. turn the ignition key. The car will beep seven times to confirm the situation is correct;
3. turn off the ignition and press the Valet key seven times;

Setting up autorun

The second programming table for the Starline A93 car alarm is responsible for the parameters of remote and automatic starts.

This is where the method of selecting the implementation of program neutral occurs, on which successful autostart on cars with a manual gearbox depends.

This table also configures:

• turning off and on the start function - you can disable any automatic and remote starts by setting the value of function 1 to option 1. Then, no matter what icons are lit on the Starline a93 key fob, auto start will be disabled;
• transmission type - automatic or manual;
• how long will the car run during startup - 10, 20 or 30 minutes;
• engine type - gasoline or diesel;
• car with push button start or key;
• control of a running engine – pulses, voltage or charging;
• and other functions necessary for the correct execution of startup commands.

After entering the main menu, select SF and press long 3 until the key fob beeps and then short press 3.

Use buttons two and three to find the desired function.

Use button one to select the desired state of the selected function.

To return to the main screen, press 3 long and 3 short.

If, after entering the menu, you do not press the buttons for 30 seconds, you will exit the Starline A93 alarm setup mode.

4.1. table 2

Start Function Programming Table 2

Setting up the STARLINE alarm system - advantages and disadvantages

In total, the security system elements connect to 6 separate zones of the car and provide protection.

A complex encryption system with an individual cryptographic code is used. When an attempt is made to break into a car, the alarm produces light and sound signals of varying intensity (depending on the selected mode).

In case of power failure, all initial settings are automatically saved. The system has a self-diagnosis function, and if there are problems with the operation of a particular element, a notification occurs that can be viewed on the key fob with a screen.

Degree of protection

Like all modern StarLine alarms, the A63 model uses a dialogue code with 128-bit AES encryption. This means that using modern means it is impossible to hack the alarm with a code grabber, and with proper installation, even a basic kit with a single blocking relay can be highly resistant to theft.

The alarm system supports operation with the StarLine R3 wireless radio locking relay - this is the main recommendation for increasing the degree of vehicle protection. Such a relay does not have a physical connection with the central unit, so it is difficult to detect it by the wires coming from the unit, and if the central unit or its radio module is physically disconnected, it continues to block startup.

Video: StarLine A63, A93 basic control functions

The Starline A63 alarm system is a security system designed for reliable vehicle protection. Correct installation of the anti-theft system will ensure the safety of the car in any conditions. You can find out more about the functions, settings, and disadvantages of this alarm model below.

Description Starline A63

Main alarm unit

Installation of Starline A63

Download free instructions in PDF format

Video “Overview of the main functions and connection of the A63 signaling system”

This is interesting: How to bind a second key to a BMW e39

What is the Starline A93 service mode?

To do this, you need to place the cursor on the wrench icon, and then briefly press the third key once.

The car will emit one light signal and the key will be constantly displayed on the display. It is worth remembering that in this mode it is impossible to record additional remote controls, program additional functions or change the secret unlock code. How to disable the service mode on the Starline A93 alarm system After all the necessary work has been completed, you can turn off the mode, returning the security system to full functionality.

Features of the Starline A63 car alarm

The basis of this model of the security complex is the fourth generation platform. Unlike previous versions, the Starline A63 system is characterized by the use of light signals and new power relays. They are used to control the central locking system. Alarm developers have introduced options designed to provide better protection and comfortable control. New opportunities in terms of condition control and monitoring of vehicle location are provided thanks to the presence of GPS and GSM modules.

Specifications

Properties that the Starline A63 budget system has:

• information is sent via a radio channel, the operating frequency of which is 433-434 MHz;
• the largest operating range of the main communicator in command transmission mode is 800 meters;
• if the key fob operates in signal receiving mode, then its range will be up to 2 km;
• the operating range of the spare pager will be no more than 15 meters;
• The sensitivity and tilt controller belongs to the category of integral three-axis sensors;
• operating temperature range is from -50 to +85 degrees;
• to power the security system, 9 to 18 volts are required;
• in protection mode, the current consumed by the system will be no more than 17 mA;
• if the security complex is supplemented with a GSM module, then the current consumption will increase to 25 mA.

The range of the Starline A63 alarm key fob depends on the presence of interference in the area, as well as weather conditions.

Degree of protection

To ensure maximum security, this system model uses conversational encoding with 128-bit AES encryption. This indicates the impossibility of hacking a security complex using code grabbers. Increased resistance to burglary is ensured thanks to the possibility of installing an additional Starline P3 blocking relay. This device does not have a physical connection with the microprocessor module; therefore, it is impossible to determine its presence by wires from the control unit. Even if the ECU is physically disconnected, the relay will remain operational.

The ExpressShina channel talked about the degree of protection and technical characteristics of the A63 anti-theft system.

Advantages and disadvantages

The advantages of this security system:

• The presence of a security code Dialogue allows you to prevent interception of signals.
• The versatility of the device. This system supports more than 300 different cars including the latest models.
• The alarm system is equipped with a CAN+LIN digital interface, which significantly simplifies and speeds up the installation process. During installation, the car owner will not have to seriously interfere with the vehicle’s electronics.
• Availability of flexible service management channels. With their help, the consumer can configure additional functions without using external devices.
• Reducing the number of false positives. During development, the manufacturer implemented technologies that made it possible to obtain a product that practically does not work without a reason.

According to reviews, malfunctions in the alarm system usually occur as a result of incorrect installation. There may be a problem with the low range of the key fob, but this is caused by external factors.

Starline a93 how to return factory settings

To save the setting, you need to press the same keys as to enter the menu. In order to adjust the sensitivity of the tilt sensor, you need to disable the security mode and press the fourth button (long), then the same button (short).

Control is performed by the second (more) and third (smaller) buttons. To save the setting, you need to press the same key combination as to enter the menu.

To switch to the manual function selection mode of Starline A93, you need to hold down the second or third button for 3 seconds. By short pressing button 3 we move the cursor to the right, and by short pressing button 2 we move the cursor to the left. In this menu, you can select the functions of starting the car engine by alarm clock, by timer, or by temperature (buttons 1,2,3 respectively).

The fourth point is called “Service mode”, which is set to transfer the car to a service station. The "Turbo" icon is intended for vehicles equipped with diesel engines with a turbo timer.

Entering and exiting the main menu

To enter the main menu, press the service button five times with the ignition off. Then turn on the ignition. You will be taken to the main menu.

Short press keys 2 and 3 on the key fob to select the programming item you need:

• AF – service and security functions
• SF – launch settings
• CH 01-CH 09 – setting up additional channels (flexible) Starline A93
• SOUN – setting the siren volume

To exit programming, turn off the ignition.

You can find out where the service button is located from your installer.

It can be located under the panel and tied to some standard harness. Often it is hidden in the space next to the fuse box or directly glued to it.

Service button

In the latest versions of Starline A39, the service button is built into the antenna module.

Service button on the antenna