Russian hatch “VAZ-2112”: is it worth taking and for whom? VAZ 2112 photo

In 1999, the first VAZ 2112 model rolled off the assembly line of the Tolyatti plant. This modernized “ten” received sportier handling and improved performance. The interior of the five-door hatchback remained almost unchanged compared to its predecessor, but the exterior was transformed.

The Lada 112 combines all the advantages of the VAZ 2110, as well as the positive qualities of previous models. The car's interior is equipped with rear seats from a VAZ 2111.

The car is available in several modifications, so it can have different wheels, for example, R13 and R14.

Disc bolt pattern and factory tire sizes on the VAZ-2112

On all models of the VAZ-2112 car from the factory, the bolt pattern had a size of 4x98 . And straight from the assembly line it was supposed to install wheels with a 13th and 14th radius and tires of size 175/70 R13 or 175/65 R14 .

Such “stamps” are suitable for VAZ-2112 (Kremenchug)The following two tabs change content below.

However, if in the case of size, then everything is more or less clear, then what a bolt pattern is is a big mystery to many. We will tell you more about this below.

Wheels for cars

A model such as the VAZ 2112 has long been firmly entrenched in the country’s market as legendary. During production, a huge number of vehicles were produced. The popularity is due to the low price and ease of maintenance of the machine. It was produced in sedan, station wagon, hatchback and coupe bodies.

VAZ 2112 car black, on white rims

Regardless of the body type, the same wheels were installed on 2112 from AvtoVAZ. The cars had absolutely identical parameters and characteristics. High popularity and widespread distribution have created a huge number of offers for the sale of spare parts, wheels and tires.

Important!

The VAZ 2112 comes off the assembly line only on rims with radii R13 and R14.

Many car enthusiasts prefer to install wheels that exceed the factory dimensions; in this case, it is necessary to take into account the dimensions of the wheel arches. It is necessary that the wheel does not touch the arch structure while driving.

In the factory configuration, in addition to stamped options, there are also some versions with cast products. However, every car owner comes to a time when it is necessary to change wheels. This happens due to excessive wear and tear, multiple damages, changing seasons and many other reasons.

When such a need arises, there is plenty to choose from on the country’s market. Both original stamped or light alloy wheels and products from various other brands are presented.

Forged wheels for VAZ 2112

Over all the years that the car was produced, there were no changes in the parameters and characteristics of the wheel mounts. This means that you can easily install them from earlier or other models to the latest ones and vice versa. Some Russian wheel manufacturers produce a special line of products for the VAZ 2112. This guarantees a perfect match of all sizes.

You might be interested in this About the sizes of alloy wheels for a Niva car

The most popular is the installation of 15 rims on 2112. This is the most convenient solution, since this size meets all the manufacturer’s requirements and does not affect the smoothness and comfort of the ride.

Note!

Almost all cars in the line have identical drilling parameters.

Its standard parameter is 4x98. This means that to install the wheels, four bolts are required, which are fastened at an axial distance of 98 millimeters. It is a very popular mounting method among machines of any manufacturer. In this regard, car owners usually do not have difficulties with the selection of wheel rims.

If there is a need to replace wheel rims, then many different parameters and characteristics should be taken into account. The main dimensions include the width and height of the rim, offset and drilling. Taking them into account, you can buy products regardless of the method of their production.

To make the right selection, it is important to know the following factors:

• In winter, it is better to use wheels with a minimum diameter and rim width. This is due to the need to obtain maximum stability in bad weather on any road surface;
• During the period from spring to early autumn, when driving conditions are normal, there is no need to comply with any requirements. You can install products of the maximum permissible sizes, which will give greater controllability and stability on the road;
• The height of the rubber profile affects the level of wear and comfort. When increasing the rim diameter in summer, you should lower the tire profile height.

Among tuning enthusiasts, it is popular to modify the design of a car to install very large wheels.

It is worth knowing that intervention in the design of the machine must be done very carefully, and it is better to entrust it to professionals. Exceeding the recommended dimensions may lead to difficulties in obtaining annual government maintenance. Also, installing large wheels will greatly affect the comfort of movement.

What is a bolt pattern?

4 holes for bolts is 4.

• The first number “4” indicated in the parameters indicates the number of holes located on the hub, intended for screwing wheel bolts into them.
• The second number “98” indicates the diameter in millimeters of the circle in which those same mounting bolts are located.

Thus, it is not at all difficult to calculate that the bolts are located at a distance of 69.3 mm from each other.

[custom_ads_shortcode2]

Car history

In 1983, the design of a sedan on the platform of the VAZ-2108 hatchback began.
The project was named VAZ-2110. But it's interesting that the design team made too many changes that made the car more expensive. Because of this, in 1984, this project was separated from the project of a simple “transition” of the VAZ-2108 into a sedan (which later received the name VAZ-21099). The first experimental version of the “ten” was released in July 1985. The management had plans to put the car into mass production since 1992, but the ensuing economic crisis had an impact. The debut versions of the “ten” were released in June 1995. AvtoVAZ was directly involved in production.

VAZ-2110 Experienced

Serial production of the cars began in August 1996, and the new product could be purchased already in the same year. In those years, global automotive technology rose to a new level and a breakthrough car until the end of the 1980s could not be called a completely new vehicle. But despite these and other complaints about build quality in the 1990s, the car was a clear step forward for the Soviet automobile industry.

If we compare the Zhiguli and Samara, the 2110 was positioned as a higher-class car that was modern and competitive both externally and internally. To be more precise, the VAZ-2112 has an electronic powertrain control system (although the debut versions came with carburetors) and a diagnostic unit (on-board computer).

In addition, it was possible to install a hydraulic power steering wheel and electric windows on the Lada 2112. Body parts were made of galvanized metal, new body painting technology was used, and so on. Issue 2110 marked a new stage in the development of the Soviet automobile industry. The hero of our article, Lada 2112, appeared a little later, in 1999, almost immediately after the VAZ 2111 station wagon. Today we will get to know this domestic model better.

conclusions

It’s not at all difficult to understand such parameters, the main thing is to remember them and choosing suitable wheels ceases to be a difficulty.

Dull VAZ stamped wheels are often hidden behind elaborate plastic caps. And for good reason. Every owner of a VAZ-2110 wants his car to stand out from the mass of gray and black dozens.

One of the ways to improve the appearance of a car is deservedly considered to be replacing the wheels. Not many people think that when selecting a replacement disk, you need to take into account not only the number of mounting holes. Today we will look into the bolt pattern of VAZ-2110 wheels and select several options for a simple and bloodless replacement.

Tips for selecting stamped products

On a note.

Wheel rims that are made using a method such as stamping can easily be called the most common for cars. Frequent installation of just such wheels is associated with the simplicity and low cost of manufacturing products of this type.

VAZ 2112 on stamped rims with plastic caps

Forged wheels are not attractive in terms of design and have poor performance, but are inexpensive.

As for installation requirements, in this case they are identical to cast products. It is necessary to ensure that the parameters and dimensions of the fasteners and overhang match.

Manufacturers

The domestic industry produces several types of rubber suitable for LADA 112. Tires that are in good demand today are:

• Kama - in Russian and European versions.
• Cordiant.

Many VAZ 2112 owners prefer to put foreign-made tires on their car. The most popular are:

• Yokohama,
• Bridgestone
• Goodyear
• Nokian Hakka Green,
• Michelin.

When choosing tires, it is very important to consider the quietness of the rubber. If it makes a loud sound, the ride comfort will be lost. It must be said that when choosing tires, it is also necessary to take into account what roads the VAZ will drive on, driving style and travel distance.

Development of the model range

AvtoVAZ designers began to think about developing a sedan based on the VAZ 2108, 2109 series in the mid-80s. It was the development of this that led to the design split in Tolyatti, the consequences of which are still felt today. Instead of simply changing the contours of the rear part of the VAZ 2109 body and making a spacious trunk, the designers proposed almost a thousand different changes, including quite expensive ones. An electronic engine control and diagnostic system (on-board computer), a new galvanizing technology, power steering, etc. were provided. AvtoVAZ management, instead of closing the expensive project, decided to carry out work in two directions:

• complicated development of VAZ 2110;
• creation of a simplified version of the VAZ 21099.

Subsequently, both concepts coexisted in the design bureau and on the factory assembly line. The VAZ 2110 line developed into the 110 family and later into the Lada Priora, and the VAZ 21099 line became the basis of the Samara 2, Kalina and Kalina 2 family.

This development of the line has led to the fact that the plant’s assembly line currently produces series of cars with very similar technical characteristics, with weakly expressed sectoral market preferences.

Generations 2112

1995

2112

2000

21120

2000

21122

2004

21121

2004

21124

Why is it important to choose the right size?

The most popular wheel sizes for installation are R14 and R15. This is due to the fact that they can be easily selected in a store and installed on a car. The main thing is to comply with the required dimensions and bolt pattern parameters specified by the manufacturer. If products with dimensions different from the factory ones are selected, then special adapter rings should be used. They often come with the product.

You might be interested in this About the bolt pattern characteristics of Mazda wheels

Adapter rings for wheels for VAZ 2112

Note!

The main problem that prevents the installation of large products is the size of the wheel arches.

If you exceed the dimensions and do not modify the wheel arches, then the rubber will touch the body structure itself during maneuvers, which leads to increased wear of all suspension components and parts and a decrease in safety.

To avoid these difficulties, it is necessary to install products only with guaranteed suitable parameters and dimensions. For the VAZ 2112, these are the diameters R14 and R15, which have factory parameters and meet all safety requirements and other characteristics.

Wheels of this size will give the car the best level of driving comfort.

As for increasing the size of the rim, their operation has its positive and negative sides, which every car enthusiast needs to know. However, the decision to purchase and replace disks should be made only by the owner of the machine.

Pros:

• Good car behavior in the lane;
• Improving the exterior of the car;
• The best road qualities, including dynamics and handling;
• Maximum absorption of potholes and road defects;
• When using rubber with a high profile, the wear resistance of chassis parts increases;
• Reducing the braking distance.

Minuses:

• Reduced level of comfort in motion. This is due to the high sensitivity of the chassis to road defects;
• Difficulty in parking and driving on poorly paved roads;
• Increased requirements for pressure control in low-profile tires;
• Increased gasoline consumption, which is associated with the increased difficulty of driving the wheels;
• High price.

Standard disk sizes VAZ 1.6i 16V 2112x

The VAZ 2112 1.6i 16V 2112x model was produced from 2004 to 2009. Table of standard and suitable wheel sizes for VAZ 2112 1.6i 16V 2112x.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

This is interesting: What are all-season tires