VAZ 2112 what size wheels and tires can be installed

Select your year 2112 1.5i 16V 2112x

The VAZ 2112 1.5i 16V 2112x model was produced from 2001 to 2009. Table of factory and suitable tire sizes VAZ 2112 1.5i 16V 2112x.

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Select your year 2112 1.6i 16V 2112x

The VAZ 2112 1.6i 16V 2112x model was produced from 2004 to 2009. Table of factory and suitable tire sizes VAZ 2112 1.6i 16V 2112x.

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Wheels for VAZ 2112

Correct replacement of wheels - and as many of you will ask, because most people don’t even know that you need to change a wheel somehow correctly, that is, just take the wheel, then unscrew all the bolts that secure it and install a new one, but in fact In fact, everything is not so simple, firstly, in order to lift and unscrew all the bolts, you must first rip them off, provided that the car is standing on the ground, because if you lift it and with the wheel hanging out you begin to rip off the bolts, applying great force to this, that is the likelihood that the car will fall off the jack and damage you, this is the kind of advice we will give you in this article, so read everything carefully and, as they say, delve into it.

Size

Lada 2112 or in common parlance Dvenashka was equipped from the factory with 13 and 14-inch wheels. Stamped and light alloy.

Factory tire sizes - 175/70 R13 and 175/65 R14

Wheel parameters: bolt pattern - 4X98, width - 5.0 and 5.5 J, offset - ET40-37, centering hole - CO 58.5

As a tuning option, you can install tires measuring 195/50 R15 and 205/45 R16 on wheels of larger diameter - R15 and R16.

Which brake pads are best? see the link.

Radius

VAZ 2112 always has 14-inch wheels. 13 won't work for her. There is a brake disc with a diameter of 14 inches. Because all 2112 are 16 valve. And only 14-inch wheels come with 16 valves.

Replacement

If a wheel is damaged, you must stop immediately in a safe place. Stopping your vehicle to change a tire on a busy road or on the side of a busy road can be dangerous. If a wheel is damaged, turn on the hazard warning lights and move slowly and carefully along the side of the road or along the far right lane until the nearest exit to a suitable area sufficiently distant from the roadway.

1. Place the car on a flat horizontal platform with a hard, non-slip surface at a sufficient distance from the roadway. Move the gear shift lever to reverse position. Apply the parking brake. If you are towing a trailer, it should be disconnected.

2. Ask passengers to get out of the car and move away from the roadway.

3. Place a jack under the car in a specially designated place next to the damaged wheel. If the car is parked on soft ground, place a wide and fairly solid support (for example, a board) under the lower support of the jack.

Note The jack must be installed only in specially designated points on the body (indicated in the figure), otherwise the body may be deformed or the vehicle may not be secured securely.

WARNING Make sure the jack is stable, otherwise the vehicle may fall off and cause personal injury. It is strictly forbidden to stand under a vehicle that is raised by a jack alone or to place your hands or feet under it.

4. Under the wheel located diagonally from the damaged one, it is necessary to place wheel chocks on both sides or, if there are no chocks, stones large enough to prevent the vehicle from moving.

5. Using a wheel wrench, loosen the wheel bolts by half a turn.

6. Using a jack, raise the car to a height sufficient to remove the wheel, and completely unscrew the wheel bolts, then remove the damaged wheel from the car. Please note that wheel bolts can be heated to high temperatures. Temporarily place the removed wheel on a platform near the car with the outer side facing up.

7. Before installing the spare wheel, thoroughly clean the adjacent surfaces of the wheel disk and hub from dirt using a clean rag.

WARNING Use caution.

As a result of braking, the parts being wiped could heat up to a high temperature.

8. Install the spare tire. Tighten the wheel bolts by hand. Then tighten the bolts using a wheel wrench. Tighten the bolts in several approaches in a crisscross pattern. The wheel should be pressed tightly and evenly against the hub flange. Do not fully tighten the wheel bolts on a suspended wheel.

9. Lower the car and remove the jack.

10. Fully tighten the wheel bolts in a cross pattern. It is not recommended to tighten the wheel bolts by pressing the key handle with your foot, as this may cause the key to break off and damage the wheel rim or cause injury.

11. Place the damaged wheel, tools and jack in the trunk.

Note It is recommended to check the tire pressure of the installed wheel at the first opportunity and, if necessary, adjust it.

Source

VAZ 2112 2112x 2008 1.5i 16V

Generation: 2112x Engine: I4, Gasoline Power: 94 hp (69 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The VAZ 2112 2112x 2008 1.5i 16V car is equipped as standard with 5Jx14 ET35 wheel rims assembled with 175/65 R14 82H tires. Where:

• 5J - rim width in inches;
• 14″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 65 — profile height as a percentage of its width;
• R - radial cord winding;
• 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82H:

• 82 - maximum permissible tire load 475 kg;
• H — maximum permissible vehicle speed is 210 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 2 MPa.

Why is it important to choose the right size?

The most popular wheel sizes for installation are R14 and R15. This is due to the fact that they can be easily selected in a store and installed on a car. The main thing is to comply with the required dimensions and bolt pattern parameters specified by the manufacturer. If products with dimensions different from the factory ones are selected, then special adapter rings should be used. They often come with the product.

If you exceed the dimensions and do not modify the wheel arches, then the rubber will touch the body structure itself during maneuvers, which leads to increased wear of all suspension components and parts and a decrease in safety.

To avoid these difficulties, it is necessary to install products only with guaranteed suitable parameters and dimensions. For the VAZ 2112, these are the diameters R14 and R15, which have factory parameters and meet all safety requirements and other characteristics.

As for increasing the size of the rim, their operation has its positive and negative sides, which every car enthusiast needs to know. However, the decision to purchase and replace disks should be made only by the owner of the machine.

• Good car behavior in the lane;
• Improving the exterior of the car;
• The best road qualities, including dynamics and handling;
• Maximum absorption of potholes and road defects;
• When using rubber with a high profile, the wear resistance of chassis parts increases;
• Reducing the braking distance.

• Reduced level of comfort in motion. This is due to the high sensitivity of the chassis to road defects;
• Difficulty in parking and driving on poorly paved roads;
• Increased requirements for pressure control in low-profile tires;
• Increased gasoline consumption, which is associated with the increased difficulty of driving the wheels;
• High price.

VAZ 2112 2112x 2008 1.6i

Generation: 2112x Engine: I4, Gasoline Power: 82 hp (60 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The VAZ 2112 2112x 2008 1.6i is equipped with 5Jx13 ET35 rims assembled with 175/70 R13 82T tires as standard. Where:

• 5J - rim width in inches;
• 13″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/70 R13 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 70 - profile height as a percentage of its width;
• R - radial cord winding;
• 13 - tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82T:

• 82 - maximum permissible tire load 475 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 1.9 MPa.

What is the tire pressure

It is important to constantly monitor the tire pressure - this will avoid difficulties when operating the car.

It should be noted that for different tire sizes the value may differ slightly:

• 175/70 R13: for front wheels – 1.9 MPa, for rear wheels – 1.9 MPa;
• 175/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa;
• 185/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa.

Some drivers deliberately inflate the front wheels below the manufacturer's specified value. Main reasons:

• less load is placed on the suspension;
• minimal feedback to the steering wheel when hitting bumps or other road irregularities.

However, low blood pressure causes:

• deterioration of management;
• quick “grinding” of the tread along the edges of the tire;
• increased gasoline consumption - by 10-15%;
• uneven axle load.

Excessively high blood pressure also causes problems. For example, when heated to 60 degrees Celsius or higher, the wheel may simply burst.

VAZ 2112 2112x 2008 1.6i 16V

Generation: 2112x Engine: I4, Gasoline Power: 90 hp (66 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The VAZ 2112 2112x 2008 1.6i 16V car is equipped with 5Jx14 ET35 rims assembled with 175/65 R14 82H tires as standard. Where:

• 5J - rim width in inches;
• 14″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 65 — profile height as a percentage of its width;
• R - radial cord winding;
• 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82H:

• 82 - maximum permissible tire load 475 kg;
• H — maximum permissible vehicle speed is 210 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 2 MPa.

Installing 4*100 disks

Let's consider several methods used by car craftsmen to install disks from foreign cars on a VAZ 2110:

1. Sometimes holes are drilled into the disc hub on a lathe so that it will be possible to install the discs you currently have. Both 98 and 100 bolt patterns are suitable. And if you need to replace the disk, then this is also not difficult to do. The bolt sizes are standard;
2. The simplest, but not the best way is to install the disk using extended bolts of regular diameter for wheels. But don’t be surprised later that this replacement led to the disc dangling, wheel play appearing, and it is impossible to establish the correct camber and toe, as well as the longitudinal inclination angles;
3. A popular, relatively safe method is to install standard size bolts with an eccentric on a VAZ 2110 (an option is also possible if the bolt has an offset center). Today, online stores offer many sets of such bolts;

VAZ 2112 2112x 2008 1.8i

Generation: 2112x Engine: I4, Gasoline Power: 98 hp (72 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The VAZ 2112 2112x 2008 1.8i is equipped with 5Jx14 ET35 rims assembled with 175/65 R14 82H tires as standard. Where:

• 5J - rim width in inches;
• 14″ — tire diameter in inches;
• ET35 - disc offset in millimeters.

The vehicle tire marking 175/65 R14 is deciphered as follows:

• 175 — profile width (cross section of the tire) in millimeters;
• 65 — profile height as a percentage of its width;
• R - radial cord winding;
• 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82H:

• 82 - maximum permissible tire load 475 kg;
• H — maximum permissible vehicle speed is 210 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x98. Thus, all disks are mounted on four bolts and the distance between them is exactly ninety-eight millimeters. The diameter of the car's hub is 58.6 mm.

Standard tire pressure is 2 MPa.

What is a bolt pattern?

4 holes for bolts is 4.

• The first number “4” indicated in the parameters indicates the number of holes located on the hub, intended for screwing wheel bolts into them.
• The second number “98” indicates the diameter in millimeters of the circle in which those same mounting bolts are located.

Thus, it is not at all difficult to calculate that the bolts are located at a distance of 69.3 mm from each other.

[custom_ads_shortcode2]

General background information

Ranges of possible values ​​for tires and wheels VAZ 2112 2008.

Tires

Wheel disks

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for a VAZ 2112 2008?

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.