Lada Priora is the most popular family of domestic cars today. The model is available in hatchback, sedan and station wagon body styles and belongs to the C class.
The main competitors are budget 4-doors: Renault Logan, ZAZ Chance, Lada Granta and Daewoo Nexia. Lada Priora boasts excellent noise and sound insulation, high-quality finishing and adaptation to Russian conditions. In comparison with “classmates”, it is more repairable, and spare parts for it are cheaper. The domestic product also has disadvantages. The operation of the model’s engine is not always stable; it is sometimes difficult to start it due to problems with the timing, air leaks and sensors. Also, car components are not of high quality.
Despite this, Lada Priora remains one of the most popular cars on the Russian market. In the Caucasus regions, it confidently holds the lead in sales volume. The car is also among the top 5 most stolen models in the country.
Tires and wheels for Priora (compatibility and photos)
If you decide to do external tuning of your car, then you should start by replacing the standard stamped wheels with cast ones. The question immediately arises: what disks should I put on the Priora? In this article we will look at the size, parameters of Lada Priora wheels and their compatibility.
Standard tire and wheel sizes for Lada Priora
The reference information indicates that the standard size of Priora tires and wheels may be as follows:
- 175/65R14 (tubeless tires)
- 185/60R14 (tubeless tires)
- 185/65R14 (tubeless tires)
Basic data of standard Priora tires and wheels for adjustment, monitoring and maintenance:
| Tire size, load capacity index | 185/65R14 86H |
| Wheel rim (disc) width, inches | 51/2 J-14H2 ET35 |
| Wheel rim offset (ET), mm | 35 |
| Air pressure in tires front/rear without luggage, MPa (bar) | 0.20/0.20 (2.0/2.0) |
| Diameter of mounting holes, mm | 98 |
| Diameter of the central hole of the wheel (disk), mm | 56 |
| Minimum tire tread height, mm | 1.6 |
The manufacturer allows the installation of wheels (rims) on the Priora with the following parameters: 5J-14H2 ET 35 and 6J-14H2 ET 35. Marking of wheels and tires
What tires and wheels are suitable for Priora
If you decide to replace Priora wheels with non-standard ones with a different size of rubber (tires), then before purchasing, make sure that they fit.
Bolt pattern on Priora
Wheels are an extremely important component in any car. The safety and comfort of movement often depends on this detail, especially in a car like the VAZ Priora.
The manufacturer has equipped the car of this brand with rims with a diameter of R14 and a width of 5.5. But the manufacturer also provided the possibility of replacing native disks with disks used on other models.
If within the Volga automobile industry models the interchangeability of wheels and tires is a common thing, then as for foreign cars, everything is much more complicated. After all, sometimes it happens that the owner of a VAZ easily gets wheels from a foreign car, where the workmanship is better and the appearance is more attractive.
But one problem arises: foreign-made rims have slight differences in the location of the holes for the bolts, which differ from VAZ ones. But how do you install wheels from a foreign car on your dear and beloved Priora?
This is where the concept of chatter comes into play. To understand what a bolt pattern is on a Priora, you need to understand the very concept of a bolt pattern.
Bolt pattern - what is it?
- A bolt pattern is a set of parameters that characterize a wheel rim in a special way and distinguish it from similar ones. These parameters include:
- — number of holes for bolts; — disk width; — disk diameter; — diameter of holes for bolts;
- - the distance between such holes.
What is the bolt pattern on the Priora?
The thing is that foreign-made cars are equipped with rims with a bolt pattern of 4 X 100, where 4 means the number of holes on the disk for bolts, and the number 100 is the diameter in the circle on which these holes are located. What is the bolt pattern on the Priora? But the Priora has a 4 X 98 bolt pattern.
If you make some simple calculations, it turns out that the Priora bolt pattern has a distance between the bolts of 69.3 mm. While the bolt pattern of foreign-made 4 X 100 wheels is 70.7 mm. The difference is 1.4 mm. It is this difference that does not allow the installation of wheels from a foreign car on the Priora.
Wheel bolt pattern on Priora. How to solve a problem?
Wheel loosening on a Priora really turns into a problem if you don’t know some tricks that can make such a procedure as wheel loosening on a Priora easy and effortless.
Method one. In order for the Priora bolt pattern to be successful, you can simply screw the disk onto regular elongated bolts. Another way would be to screw the disk with 3 bolts instead of 4. But this method is not safe and is used solely at the driver’s own risk.
Method two. The bolt pattern of Priora wheel rims can be done using special bolts - eccentrics. They make it possible to level out the resulting gap within a certain range, so they are often used by car enthusiasts.
Method three. Using studs, for example, from the cylinder head of a VAZ 2108, which are screwed into the hub, and the disc itself is tightened with nuts. In this case, the VAZ Priora bolt pattern can also be successful.
Whatever method of loosening you choose, you should always remember about the safety of movement. After all, wheels are the main element, on the reliability of which not only the comfort of movement, but also people’s lives depends.
Source: https://priorapro.ru/diski/razboltovka-na-priore.html
Generation 1
Lada Priora is an updated version of the popular VAZ 2110 model, production of which ended in 2007. Over 1,000 changes were made to the design of the “tens,” beloved by many Russians. As a result, a new family of cars appeared, consisting of 3 representatives:
- "VAZ-2170" - a sedan, the production of which began in March 2007;
- “VAZ-2172” is a hatchback that appeared in February 2008;
- "VAZ-2171" is a station wagon, sales of which began in May 2009.
After the modernization of the VAZ-2110, a fundamentally new car appeared that retained the same features. In the first version of the Lada Priora, similarities with the “ten” were clearly visible, but the bow and stern of the car became different. The headlights have increased in size and the radiator grille has become larger. The taillights were also modified, but overall the changes in appearance could not be called global.
If the exterior of the model was developed by specialists from the Volzhsky plant, then the interior was created by designers of the Italian company Carcerano. As a result, he was strikingly different from what he was in the top ten. The front panel looked more like a “torpedo” of a foreign car. It was trimmed with soft plastic, adding a curved visor above the instrument cluster. The interior was complemented by an oval-shaped clock installed in a silver trim at the top of the console.
The basic equipment of Lada Priora has become noticeably richer. It offered electric front windows, central locking with remote control, athermal windows, an airbag, electric power steering, an electronic clock and an adjustable steering column.
The car was available in three trim levels: “Standard”, “Norma” and “Lux”. They differed exclusively in the level of equipment. The model was equipped with 2 types of gasoline units:
- 1.6-liter 8-valve VAZ-21116 engine (90 hp);
- 1.6-liter 16-valve VAZ-21126 engine (98 hp).
Wheel size
The small selection of versions of the Lada Priora model also limited the types of wheels available for use:
- wheels 5.5J on 14 ET37 (5.5 – width in inches, 14 – diameter in inches, 37 – positive offset in mm), tires – 185/65R14 (185 – tire width in mm, 65 – profile height in%, 14 – rim diameter in inches);
- 6J wheels on 14 ET35, tires – 195/60R14;
- 6.5J wheels on 15 ET35, tires – 185/55R15;
- 6.5J wheels on 15 ET35, tires – 195/55R15;
- 6.5J wheels on 16 ET35, tires – 195/50R16.
Other wheel characteristics and tire pressure:
- PCD (drilling) – 4 by 98 (4 is the number of holes, 98 is the diameter of the circle on which they are located in mm);
- fasteners – M12 by 1.25 (12 – stud diameter in mm, 1.25 – thread size);
- diameter of the central hole – 58.6 mm;
- tire pressure – 1.9 bar.
Summer and winter
Each season means the installation of special tires that have the necessary properties for each season.
In summer, it is necessary to maintain the hardness of the rubber and resistance to high temperatures. Therefore, summer tires are radically different from winter tires on Priora.
There are varieties of summer tires - some are designed for wet asphalt conditions, or vice versa - they have protection against aquaplaning. What to install is up to the owner to decide.
Winter tires must be flexible and resistant to low temperatures. They should have deep slats for quick self-cleaning and perform well on winter surfaces.
On the Priora, it is best to choose studded tires - the most suitable for driving on snow and ice.
Generation 2
In 2013, Lada Priora was updated. You shouldn't look for dramatic changes in the model's appearance, but new touches and details have appeared here. After restyling, the model received headlights with daytime running lights, brake lights and taillights with LEDs. Instead of a rectangular shape, the radiator grille was made pentagonal with a honeycomb cladding structure. The rear bumper received an energy-absorbing insert and a new design. However, the dimensions of the model remained the same.
There were much more changes in the interior. Inside the restyled Lada Priora, new finishing materials and modified seats have appeared, and the architecture of the front panel has changed. A color display with touch control was installed at the top of the center console. The seat backs have increased by 40 mm, which has a positive effect on comfort. The interior of the updated Lada Priora has become quieter.
In addition to design changes, the technical part has also been improved. The model has an improved suspension and new steering with a lower gear ratio. The main difference was the advanced 1.6-liter unit with dynamic supercharging producing 106 hp. The previous power plants remained available. The configurations did not change either. Lada Priora was still offered in “Standard”, “Norma” and “Lux” versions with the following types of wheels and tires:
- 5.5J wheels on 14 ET37, tires – 175/65R14;
- 5.5J wheels on 14 ET37, tires – 185/65R14;
- 5.5J wheels on 14 ET37, tires – 185/60R14;
- 6J wheels on 14 ET35, tires – 195/60R14;
- 6.5J wheels on 15 ET35, tires – 185/55R15;
- 6.5J wheels on 15 ET35, tires – 195/55R15;
- 6.5J wheels on 16 ET35, tires – 195/50R16.
The model’s body was made of low-alloy steel and galvanized metal, which extended the warranty against corrosion to 6 years.
Pressure
One of the most important parameters when operating any tires is pressure. An incorrectly set parameter value can lead to the replacement of tires, wheels, suspension, and driving the car will be difficult and difficult. For the Lada Priora, the debate is still raging about which one is necessary.
On average, the pressure is set from 1.8 to 2.2 atmospheres and is the most optimal for cars of this brand. They set both more and less, but the factory stated the above parameters for the R14 (about 2).
What wheels were installed on different versions of the car?
The design of the Lada Priora is more similar to the popular VAZ 2110 (ten), mass production of which was completed in 2008. More than 100 changes were made to the top ten, after which three new modifications of the car were created:
These are, respectively, a sedan, a hatchback, and a station wagon, manufactured after 2008–2009. Equipment: “Standard”, “Normal” and “Lux”, depending on finishing materials, additional options, and power of the power unit.
- 1.6 l. / 8th grade / 90 hp;
- 1.6 l. / 16 grades / 98 hp
Is it possible to put a 4 by 100 bolt pattern on a VAZ?
4*100 discs fit on the VAZ hub without any problems. The main difficulty is choosing wheels with the required offset. On a budget, the problem of installing wheels with a 4*100 bolt pattern can be solved in two ways: ... Well, and most importantly - tighten the bolts or nuts crosswise - this way you will be able to tighten the wheel evenly.
Interesting materials:
Which differential should I put on the washer? What kind of diploma does the college provide? How long are a giraffe's legs? What income is included in the calculation of sick leave? What should be the normal level of radiation? What should be a snack at the PP? Which engine is better to install on the Niva? Which web page element can be a hyperlink? What fast food appeared first? Which Leonid Gaidai film is the best?
Wheel sizes
- First generation Lada Priora
| Disk size | Parameters (inch) / tire size |
| 5.5J on 14 ET37 | 5.5 (width) 14 (diameter) 37 (offset) tires – 185/65R14 (width, height, diameter) |
| –/– | 195/65R14 |
| 15ET35 | 175/55R15 |
| –/– | 185/55R15 |
| 16ET35 | 195/55R16 |
It is equally important to know the following characteristics:
- PCD (Pitch Circle Diameter) diameter of the center of the mounting holes: 97 mm;
- Drilling: number of holes 4;
- Fastener type: M12 – stud diameter;
- Thread size (pitch): 1.25;
- Center hole diameter: 59 mm;
- Pressure (front / rear): 1.9 / 2.0 bar.
PCD is calculated by measuring the distance between the centers of opposite holes. We measure with a ruler; it is not necessary to dismantle the wheel.
- For disks with five bolts, multiply the obtained result by a factor of 1.06;
- For four bolt construction, PCD = actual distance.
The offset of the rim is designated ET, the unit of measurement is millimeters. This is the distance between the point of contact between the disc and the hub and the middle of the rim width.
The designation is different in different countries. For example, in France it is called DEPORT, in Asia OFFSET.
The offset is positive if the plane does not extend beyond the point of contact, otherwise the offset is negative.
The further the rim is from the body, the more the offset tends to zero.
- D is the diameter of the central hole, measured in millimeters.
- J, H and subsequent alphabetical symbols indicate the markings of the humps on the rim flange. Symmetrical, asymmetrical and combined.
In simple terms, a “hump” is a protrusion on the rim for a tubeless tire. When moving, the “rails” hold the tire beads, preventing depressurization.
Numerical characters indicate the release date, month, year.
- TUV is an abbreviation for the regulatory authority for compliance with quality standards.
Maximum wheel load (MAX LOAD). The unit of measurement depends on the country of manufacture of the rubber or rim: USA, Europe, Asia.
Tire parameters
When choosing tires, you must take into account the technical characteristics of the model and the manufacturer's recommendations. At the factory, all indicators have already been calculated and the parameters recommended by the factory are optimal. What tires for the Lada Priora do the manufacturer recommend? Tire width 175 - 185 mm, profile 60 - 65, and wheel diameter R14.
The manufacturer states that these parameters correspond to the technical characteristics of the car, and contribute to high handling, soften road irregularities and allow you to enjoy driving the car. The tire, in addition to its dimensions, must have a speed index of “H” (maximum speed – 210 km/h), and the load index must be at least “82”.
But owners often neglect the recommendations and install tires with a large radius. When choosing a tire size for a Priora, you need to take into account all the car’s parameters. This is necessary to select tires that will not negatively affect the handling and safety of the car.
What kind of disks can be installed?
The size of wheels, tires, disks that are installed on a car have a direct impact on its technical characteristics. In the instruction manual, the manufacturer indicates the recommended dimensions, as well as acceptable ones.
The owner of the vehicle, in our case Lada Priora, independently decides what type and size of wheels and tires to install. For the average driver who uses the car as a means of transportation to and from work, the factory rim sizes are more than enough.
In case of tuning, changes in standard characteristics, dynamic indicators, it is necessary to refit the car with non-standard wheel sizes.
List of characteristics that can be changed by installing non-standard wheel sizes:
- Controllability;
- Road grip;
- Sharp and responsive steering wheel;
- Reduced/increased aquaplaning;
- Comfort of movement;
- Noise level;
- Combined cycle fuel consumption (see photo);
- Tread wear rate.
Factory wheels on Priora
When production started in 2007, the car was offered with only one wheel option. In the factory configuration, the tire size marked 185/60R14 86H was used, and the wheel rim on the Priora had parameters of 5.5Jx14 4/98 ET35 d58.5. This decision was dictated by the need to save money and reduce the cost of the car. And judging by data from the official website, this continued until 2015.
And only from 2015 to 2022, five options for wheel parameters for Priora appeared in the operating manuals. Therefore, you can see in the table what wheel size the Priora had in the last years of production of this model.
| Tire size | Disk options |
| 175/70R13 82H | 5Jx13 4/98 ET35 d58.5 |
| 175/65R14 82H | 5.5Jx14 4/98 ET35 d58.5 |
| 185/60R14 82H | |
| 185/65R14 82H | |
| 185/55R15 82H | 6Jx15 4/98 ET33 d58.5 |
What wheels are installed on the Priora from the factory? Wheel rims were either stamped steel of our own production (most often from the Tolyatti Steel Wheels Plant (T3SK)), or cast wheels produced by K&K. The most popular model of alloy wheels is “Attica”. AvtoVAZ's factory tires are supplied by Nizhnekamskshina and Sibur-Kordiant.
Original alloy wheels for Priora
Original steel wheels for Priora
It’s also worth stopping at thirteen-inch wheels. They were installed only on cars with eight-valve engines, and cars with this configuration were equipped with smaller brake calipers. That is, you cannot use 13-inch wheels for installation on cars that are factory equipped with fourteen-inch and fifteen-inch wheels.
However, replacing wheels with a smaller radius on a Priora is a rare case. And judging by unofficial online surveys, thirteen-inch wheels cost less than 1% of cars of this model in all of Russia. Quite the contrary - car owners want to increase the diameter of the wheels on their Priora. Below we will discuss how this can be done so that such tuning does not affect handling.
Compatible wheel sizes for Lada Priora
- Width:175, 185, 195, 205;
- Profile height: 45, 50, 55, 65;
- Rim diameter: 14;
- Design type: R – radial.
- Width: similar to the previous parameters;
- Profile height: from 40 to 55;
- Rim diameter: 15;
- Construction type: similar to the previous ones.
- Width: from 175 to 205;
- Profile height: from 40 to 50;
- Rim diameter: 16;
- Construction type: similar to the previous ones.
- Width: from 175 to 195;
- Profile height: 40, 45.
Acceptable and optimal sizes
There are a number of tires and rims that are simply acceptable for installation, and which are ideal for installation:
- What sizes are suitable without loss: R 14 - 175/65; 185/65; 185/60; 205/55; R15 - 175/60; 185/55; 195/50; 205/50; R16 - 175/50; 195/45 - on wheels with these sizes, all recommendations will be followed, and the Lada will not lose the quality of control and comfort.
- Acceptable sizes suitable for Lada: from 175/60 R14 to 205/32 R Which tires you can choose should be clarified in the official AvtoVAZ services.
There are owners who install wheels with a large diameter - as a result, friction between the wheel and the car body occurs, which has a bad effect on both the car and the durability of the tires. Therefore, if you want to install special tires and wheels, you need to consult with specialists and carry out calculations.
What tire sizes does the manufacturer recommend to install?
The type of tire installed directly at the factory differed depending on the year of manufacture, vehicle modification, and body type. The load index also differed. Therefore, before you start replacing, you should carefully familiarize yourself with all the intricacies of choosing tires. Using rubber similar to the standard one allows you to avoid many difficulties.
One of the first modifications of Lada Priora was equipped with an 80 hp engine. An injection-type gasoline engine was installed. The standard tires are 185 mm wide. At the same time, the profile height is only 65 mm. The wheel diameter is 14 inches. Speed index - T. Wheels of this type were installed at the factory.
For cars with an 86 hp engine. The manufacturer practiced installing 3 different types of wheels:
- 175/65 mm;
- 185/60 mm;
- 185/65 mm.
Moreover, all modifications had wheels with a diameter of 14 inches. Cars with a power of 97 hp equipped with wheels 185 mm wide with a profile height of 65 mm. In recent years, before the production of this model was stopped, the most purchased modification was a car equipped with a 105 hp engine. The following types of wheels were installed at the factory:
- 175/65 mm;
- 185/60 mm;
- 185/65 mm.
The standard wheel size is 14 inches. Standard marking is 5.5J×14.
About tires on Lada Priora cars of 14 and 15 diameters
The sizes 14 and 15 inches are rightfully the most common for installation on the Lada Priora. The manufacturer clearly states the permissible tire sizes. This:
- 175/65 R14 82Н;
- 185/60 R14 82Н;
- 185/65 R14 86H;
- 185/55 R15 82H.
In addition, wheels with the following dimensions are also suitable:
- 175/70 R13 82T;
- 175/65 R14 82Н;
- 185/60 R14 82Н;
- 185/65 R14 86H;
- 185/55 R15 82H.
The choice of size for a personal vehicle depends only on the preferences of the car owner. Different tires may provide different characteristics; to obtain the optimal one, you must take into account all the manufacturer's recommendations. For tuning, Priora can even be equipped with wheels with a diameter of 17 inches. They do not have a high level of smoothness, but they noticeably decorate the car.
“Lada Priora” can easily be called the people's car. At the same time, this is the car to which its owners probably made the most changes and modifications. And a lot of them are related to suspension and tires. This is all the more paradoxical since in the first versions only one wheel size was offered on the Lada Priora. But let’s take a step-by-step look at what wheels are on the Priora and which ones can be installed.
What non-standard sizes can be supplied?
Installation of disks of other sizes is allowed. It is important to note that before use, you should ensure that there are no compatibility issues. Using wheels of non-standard sizes can cause the following problems:
- breakage of the plastic fender liner;
- damage to mudguards;
- premature wear of the chassis.
Often an installed wheel of a larger diameter touches the inside of the fender liner. Which leads not only to damage to the plastic under the car arches. But also quick wear of the tread. It is advisable to avoid such situations.
A good solution is to “try on” a similar wheel before purchasing non-standard tires. It should not overlap the car body even in extreme steering positions. Otherwise, the installation must be abandoned.
In some cases, after modification, it is possible to install wheels with a diameter of 15 and even 16 inches. However, this can only be done after finalizing the design of the car. The wheel arches will need to be rolled in with a special roller - after which they can be used without any problems, there is a danger of damaging the body.
The car manufacturer suggests the possibility of using wheels of non-standard overall dimensions. It is allowed to install wheels with the following dimensions:
- 195/60 R14;
- 185/55 R15;
- 195/55 R15;
- 195/50 R16.
All tires with the diameters listed above can be mounted without any concerns. Load index – 86. Speed index – T. The use of 6.5J disks is mandatory. The diameter can be used 14, 15, 16. The bolt pattern on all the cars listed above is completely identical - 4x98.
Tire sizes for Lada Priora
Factory tire parameters:
- 175/70 R13 82T;
- 175/65 R14 82Н;
- 185/60 R14 82Н;
- 185/65 R14 86H;
- 185/55 R15 82H.
For tuning, it is possible to install tires with the following sizes:
- 195/55 R15;
- 195/50 R16;
- 205/45 R17.
Disc sizes and parameters:
- wheel bolt pattern - 4×98;
- rim width - 5.5, 6.0j, inches;
- rim offset - ET 37 or 35 millimeters;
- diameter of the centering hole - CO 58.6, millimeters.
It is in these dimensions that the car will correspond to all factory settings and characteristics, both in terms of control and dynamics. The wheels of the presented sizes provide optimal traction and stability. In addition, the comfort and smoothness of the ride will also be normal. The car will be able to overcome small road defects and obstacles without putting much strain on the backs of passengers. With these wheel sizes there will not be much shaking. Safe driving is ensured both in the city and on country roads.
To correctly select wheels by size for a Priora car, regardless of the year of manufacture and engine size, you need to know what the main differences in characteristics are for different sizes.
What is the tire pressure
The consequences of too high or too low tire pressure are serious - it is necessary to operate the car with well-inflated tires. Regardless of the load, rubber used and diameter, the nominal pressure is considered to be 0.2 MPa. The width of the rim (5J, 5 ½, 6J) does not matter.
Using tire pressures above the minimum has the following consequences:
- quick grinding of the central part of the tire;
- poor handling;
- There is a high risk of the wheel exploding.
Moreover, if a tire bursts while you are not driving, this can lead to extremely unpleasant consequences. For example, if the front wheel on the driver's side fails, the car may drift into the oncoming lane. Which will lead to a serious accident. Tire pressure should be checked before each trip. It is best to use a special device for this - a pressure gauge. It can be mechanical or electronic.
Many owners specially inflate tires to 1.7-1.8 atm. The main reason is greater ride comfort - thanks to the low pressure, shocks to the suspension are practically not transmitted to the passenger compartment and to the steering wheel. However, low tire pressure causes:
- rapid wear of the tread - it wears down at the edges an order of magnitude faster;
- increased fuel consumption - for every 100 km of travel, gasoline is consumed by 5-15% more.
Operating a vehicle with half-flat tires is dangerous. It is advisable to avoid such practices.
What tires are suitable for the Lada Priora in the summer?
The choice of summer tires for each car should be accompanied by a determination of driving style.
Drivers who prefer a relaxed driving style, maintaining an average speed level on city roads, can choose from budget high-profile models. They will provide the car owner and his passengers with the necessary level of safety and comfort while driving.
Fans of aggressive driving who choose low-profile tires are faced with high noise levels while driving. Every unevenness in the road surface is transmitted to the suspension, which reduces its wear resistance.
You can pay attention to the following brands of car tires: Maxxis, Kama, Cordiant, Goodyear.
Review of the best summer and winter tires
For Lada Priora, stores offer a large selection of different tire models. Since models marked R14, R15, R16 are used on most modern cars. It won’t be difficult to choose suitable wheels for winter and summer – separately.
A good solution for summer travel will be the Toyo Proxes CF2. The cost of one tire of this model is no more than 2,200 rubles. Allows you to easily take sharp turns and provides excellent maneuverability.
An equally profitable purchase is BFGoodrich g‑Grip. Despite the low cost (only 2,180 rubles), it performs well on the highway and in the city. The presence of deep slats eliminates aquaplaning.
Conti Premium Contact 5 is the fifth generation of the Continental series. The cost of one such tire is approximately 2,700 rubles. The main advantage of this modification is the ability to travel at speeds of more than 190 km/h and a short braking distance even on wet asphalt.
Nokian Hakka Green is a good option; it will cost the buyer only 2,400 rubles. The tires of this model are perfectly balanced and have a rigid central rib. It provides good maneuverability.
You need to be especially careful when choosing winter tires. The budget solution will be NEXEN 175/65R14 WG ICE PLUS. There are no thorns on it. However, the deep tread will allow you to feel confident on any, even the most difficult road.
SAVA 175/65R14 ESKIMO S3 also do not have studs. However, deep tracks in the tread allow for excellent water drainage from the contact patch. This eliminates hydroplaning. Rigid sides make the car well controlled on any road.
GISLAVED 175/65R14 NORD FROST is equipped with a large number of studs - which significantly simplifies the procedure for moving on icy roads. Even bare ice will not be a hindrance. Steel spikes perfectly hold the car on the road surface.
PIRELLI 175/65R14 WINTER FORMULA is a balanced tire designed for a maximum speed of 190 km/h and a load of up to 475 kg. The presence of studs evenly distributed over the surface allows you not to worry about braking.
GOODYEAR VECTOR 4SEASONS GEN-2 will cost relatively inexpensively - just over 3,500 rubles. Weather Reactive technology was used in production. Thanks to it, the wheels can easily adapt to any, even the most difficult conditions.
It is important to use suitable tires - this will make the car easier to drive and prevent an accident. Installation of non-standard wheels is allowed. However, in some cases, modifications are required.
We recommend articles on the topic Lada Kalina tires
Tires Toyota Land Cruiser Prado 200 Wheels VAZ 2114
What tires are suitable for a Lada Priora car in the winter?
The winter tires supplied with this car have a special rubber composition that retains its softness and elasticity at different temperatures. The sipes in the tread pattern of these tires have a special structure that removes excess moisture, dirt or snow from the surface of the rubber. Such wheels maintain the desired level of vehicle controllability in the winter season.
However, factory tires also have their disadvantages: insufficiently strong fastening of the studs contributes to their rapid loss, and the noise emanating from the wheels while driving reduces driving comfort.
The table shows possible options for winter tire sets for the Lada Priora.
Winter tires for Lada Priora
| Maxxis NP3 Arctic Trekker 89T Cordiant Snow Cross (PW-2) 89T Laufenn iFIT ICE (LW71) 89T (XL) BFGoodrich G-Force Stud 89Q (XL) Nitto Therma Spike 85T |
When choosing winter tires for a vehicle, you need to pay more attention to its quality characteristics than to its external ones. Low-profile high-speed tires, as a way to make the car more aggressive, are more appropriate in the warm season.
Manufacturers and prices of analogues
The tires of the Lada Priora correspond to the size popular for budget cars, so suitable models can be found in the assortment of almost any manufacturer.
- A common budget brand that produces all-season tires is Kama. The products of the Nizhnekamsk plant include many models of all-season products. Price – from 1500 rubles.
- Ukrainian ROSAVA BC-40 tires of the required Lada Priora size cost about 2,000 rubles. Chinese Sunfull SF-688 tires are sold at the same price.
- Matador, a company owned by the tire concern Continental, offers MP61 Adhessa and MP62 All Weather Evo all-season tires in the Lada Priora size. The price is about 2500 rubles.
- The oldest American company Goodyear has in its assortment “all-season” Vector 4Seasons Gen-2, costing 3,700–4,000 rubles.
- The premium brand Continental also makes products for year-round use - AllSeasonContact, price on average 4,700 rubles.
List of wheel manufacturers for Priora and their price
Stampings and castings with a diameter of 14 inches are produced by many domestic and foreign companies. Among the stamp manufacturers, the following stand out:
- KFZ is an Austrian company that supplies wheels to many auto manufacturers. Model 5935 is suitable for Priora. Cost – 1300-1800 rubles.
- Mefro is a German company that produces high-quality, affordable parts. This company produces original spare parts for Lada, article number 21700-3101015, price 900–1100 rubles.
- Magnetto - produced in the Leningrad region, the brand belongs to the Italian group of companies CLN SpA Code for Priora - 14003, costs around 900 rubles.
- TZSK - Tolyatti Steel Wheel Plant - the official supplier of AvtoVAZ. Cost – 850-950 rubles.
- Eurodisk is a brand of the Fergana Mechanical Plant, production is carried out in Uzbekistan and the Leningrad region. The standard Priora model 53B35B costs about 900 rubles.
- Trebl is a Chinese brand. The brand's assortment includes a wheel with article number 53B35B for the Lada Priora, their price is approximately 950 rubles. Casting is represented by a greater variety than stamping. Unfortunately, many low-quality Chinese-made models are sold that are not durable enough. The production of cast elements is a technologically complex process, so choose casting from reliable companies.
Good light alloy wheels are produced by Russian manufacturers. K&K is a supplier of Lada conveyors. Products from the Krasnoyarsk plant are durable and of high quality.
The KiK line is offered as original Lada Priora accessories:
- Torus.
- Status.
- Magma.
- Combi.
- Sonar.
- Attica.
- Sunway.
- Orbis.
What kind of tires can still be put on the car after modifications?
Many Lada owners do not limit themselves to the list of products approved by the car plant, but install rollers of non-standard sizes.
Wheels with tires measuring 15, 16 inches, even R17 on Priora, fit without modifications with a tire width of up to 215 mm. Naturally, low-profile tires are used. For 17-inch wheels – profile 40-45%. For example, 205/40 R17, 195/45 R17. When installing such “rollers” you will need to remove the fender liners. It is difficult to find a product of this size with a drill and mounting hole standard for Priora. It is necessary to use spacers, centering rings, and eccentric bolts.
When installing non-standard rollers, it is necessary to pay attention to the disc overhang. With some parameter values, the wheel will not fit into the wheel arch, so you will have to trim the latter or make other changes.
Tires play an important role in safety, comfort of movement, and ease of driving. Therefore, you need to carefully select these consumables and monitor its condition.
Which summer tires to choose for this domestic car
A wide range of summer tires are suitable for Lada Priora. The size must be selected based on the recommendations of the car manufacturers. Information on the characteristics of suitable tires can be found in the technical documentation.
As for summer products, parameters 195, 185 or 175 indicate the corresponding tire width, which is measured in millimeters. Next comes the profile height indicator, which is indicated as a percentage relative to the width. The last one is usually the tire diameter, it can be R15, R16 and others.
Recommendations for storing and caring for discs
- During a routine technical inspection, check the geometry and balancing of the wheel on a special diagnostic stand. If deviations are detected, restore the integrity of the structure;
- If cracks or dents form on the rim, immediately contact a service station for preventive maintenance;
- Avoid hitting road potholes at high and medium speeds. Regardless of the material or workmanship, the disk will be deformed and the seal will be compromised;
- Monitor the tire pressure; it should not be lower/higher than recommended by the manufacturer. If it deviates, pump it up;
- Switch to summer/winter mode in a timely manner. This means that in summer the tire pressure is 0.15 atm higher, and in winter it is lower by the same amount. The parameters are specified in the vehicle operating instructions;
- Tighten the rim nuts with a torque wrench. Excessive tightening contributes to the breakage of the studs, weak - an emergency situation, unscrewing the wheel.
In dry, sunny weather, cast aluminum wheels are least susceptible to external damage. But in slush, ice, when the road is strewn with various chemicals, the rim is most susceptible to corrosion. This provokes paint peeling and destruction of the molecular composition.
Wash your wheels as they get dirty. Since it is unlikely that you can clean it properly with a rag, use high-pressure compressors. Equipment of this class is available at many service stations, workshops, and service centers.
Systematic polishing allows you to get rid of scratches and burrs. First clean the wheel from dirt, dry it thoroughly, and then treat it with a chemical. Wipe several times with a microfiber cloth.
Store the wheels in a hanging position without touching each other. Pre-clean them, dry them, and wrap them in cellophane.
Some motorists practice applying an aerosol to the surface before preservation. However, this is a purely personal decision of the owner.
General recommendations
Any owner of a Lada Priora should remember that the best and safest option is to install absolutely identical tires on all four wheels . They must have the same dimensions, properties and tread pattern.
For most climatic zones, the most justified solution can be considered the purchase of two sets of tires for the Priora - winter and summer. The funds spent on their purchase will eventually pay off with a long period of operation, comfortable, confident and safe driving at any time of the year.
The inexpensive cost of tires should most likely put you on guard and should not be considered as the main factor in their purchase. High-quality rubber cannot be sold at the lowest price, since the best components and the latest technologies are used for its production. More expensive, branded tires are usually lighter and more durable than standard tires. They create a minimum of noise, reduce fuel consumption, and provide excellent handling of the Priora.
The desire to save money and purchase used tires is a dubious pleasure. After their installation, no one can guarantee you safe operation of the car. Only specialized service centers sell certified tires that meet all safety regulations and standards. Their staff will help you choose tires for your Priora that meet your requirements and fully comply with the technical parameters of the car. Your Lada Priora deserves the best!
Source 1ladapriora.ru
Lada Priora - the model has already become almost a classic, despite the fact that it entered the market several years ago. Priora remains a popular model today. But despite the brand recognition, each car needs additional equipment. One of the names of such equipment is summer and winter tires for Lada.
Which tires are ideal? What tire pressure should be set on the Priora? Not only the stability of the car, handling and tire service life, but primarily the safety of the driver and passengers depend on the correct parameters.
Question answer
What tire and wheel sizes are recommended in KOLOBOX for the Lada Priora?
The size of tires and wheels suitable for a particular car depends on the year of its manufacture and modification.
Lada Priora, launched on the market since 2007, is currently presented in a single modification.
Judging by the table, the following tire parameters are recommended for this car: diameter 15 or 16 inches, width from 175 to 195 mm, profile (width to height ratio) from 50 to 70%.
Other variations of these sizes, up or down, are possible, but taking into account all the negative consequences associated with such tuning.
What tires are suitable for a Lada Priora car in the winter?
The winter tires supplied with this car have a special rubber composition that retains its softness and elasticity at different temperatures.
The sipes in the tread pattern of these tires have a special structure that removes excess moisture, dirt or snow from the surface of the rubber. Such wheels maintain the desired level of vehicle controllability in the winter season. However, factory tires also have their disadvantages: insufficiently strong fastening of the studs contributes to their rapid loss, and the noise emanating from the wheels while driving reduces driving comfort.
The table shows possible options for winter tire sets for the Lada Priora.
When choosing winter tires for a vehicle, you need to pay more attention to its quality characteristics than to its external ones. Low-profile high-speed tires, as a way to make the car more aggressive, are more appropriate in the warm season.
What tires are suitable for the Lada Priora in the summer?
The choice of summer tires for each car should be accompanied by a determination of driving style.
Drivers who prefer a relaxed driving style, maintaining an average speed level on city roads, can choose from budget high-profile models. They will provide the car owner and his passengers with the necessary level of safety and comfort while driving.
Fans of aggressive driving who choose low-profile tires are faced with high noise levels while driving. Every unevenness in the road surface is transmitted to the suspension, which reduces its wear resistance.
You can pay attention to the following brands of car tires: Maxxis, Kama, Cordiant, Goodyear.
What wheels are recommended for the Lada Priora?
Recommended wheel sizes for Lada Priora cars: 15 and 16 inches. These are the most comfortable driving options. It is also possible to install larger sizes, for example, 16 inches or more, but they require the purchase of low-profile tires.
The bolt pattern, as the main indicator that should be followed when choosing rims, on the Lada has the following form: 4 holes for fastenings located on a circle with a diameter of 98 mm.
What pressure is recommended for Lada Priora tires?
For tires with a diameter of 14 inches, you should adhere to the following pressure: 2.0 Atm with the possibility of reducing to 1.8 Atm for softer wheels. This option is suitable for those car owners who feel that the Priora tires are too hard and feel all the bumps on the road surface while driving.
For 15-inch wheels, the pressure should be maintained at 2.1-2.2 atm.
Priora bolt pattern: about the wheel bolt pattern on the Lada Priora, its parameters
The bolt pattern of Lada Priora wheels is a rather important parameter when installing a new set of rims. In this case, every car owner needs to know it during selection.
This parameter name is the most common, but sometimes you can also find another name such as drilling. Despite the differences in name, the meaning remains the same.
It is necessary to know it in order to understand how the wheel is attached to the suspension elements.
The bolt pattern of the VAZ Priora corresponds to such brand models as Kalina, Granta and all classic models. This is done to avoid unnecessary confusion among car owners, as well as to reduce the cost of the production process.
What is the wheel bolt pattern on the Priora?
Lada Priora is deservedly one of the most popular and widespread sedans of the AvtoVAZ concern. This is due to the low cost of the model and high driving performance, which is an order of magnitude higher than that of classic models. In addition, there are no problems finding spare parts and components to improve the car, and you can service it yourself in the garage.
Parameter description
The installed rims have a very big influence on the behavior of any car on the road, its stability, steering and other characteristics. Their size and characteristics will determine the safety, dynamic qualities, and appearance of the car.
To select, purchase and install products on a car, you need to have information about their bolt pattern parameters. Knowing them, you can confidently buy and install a set of new disks.
At the moment, for the entire model range you can buy both original factory wheels and those produced by various other companies: both domestic and foreign. For example, the famous Russian brand “K&K” has an agreement with the manufacturer and produces a special line for Lada models.
New products created in an individual design will help perfectly decorate the appearance of the vehicle. However, the most common reason for replacement is still wear and tear or change of season.
Car tuning is also very popular. It is carried out to make it more sporty and attractive. One of the main components to replace during tuning is the wheel rim.
You can find out what kind of bolt pattern is on the Priora from the technical documentation or from special tables presented on the Internet.
Priora is available in sedan, hatchback and station wagon body styles. The parameters and characteristics of the discs do not depend on the car's design.
During the operation of the vehicle, car owners get bored with the standard appearance and want to change something. In this case, tuning comes to the rescue, allowing for visual and technical improvements. It is possible to replace some car components with improved, sportier and more attractive ones.
The main part on which the appearance depends is the rims. In this regard, car enthusiasts try to replace them first.
For any vehicle, wheels are not only part of the appearance, but also a very important design element, the size, production method and weight of which determine the vehicle’s stable behavior on the road surface, handling and dynamic qualities.
Lada Priora with 16-inch wheels
A new set of products must comply with all parameters declared by the manufacturer. This applies to both correct drilling and the required dimensions in terms of width, size and reach. It is also necessary to select high-quality tires for the season, since inaccurate sizes will negatively affect operation.
The drilling parameter determines whether the selected rim can be installed on the car. If the parameter does not match, then it is necessary to use adapter rings, which entails undesirable interference in the factory design.
Installation of large diameter wheels
Standard Priora rims are size R14, so alloy wheels of this diameter are the most popular, the choice of patterns and colors is very wide. Installing them on a car does not present any difficulties and is done quite quickly, and the cost is quite affordable compared to products of large diameters . According to manufacturing technology, they are divided into 3 categories:
- Alloy wheels are made of aluminum, less often of magnesium. The metal is cast in a special mold, and after hardening it is finished using automatic metalworking equipment, and then painted. Such a product is afraid of strong impacts, it can crack or even collapse and cannot be repaired. The presence of a crack in the R14 cast rim can be detected by air leakage from the wheel and a drop in pressure.
- Light alloy products are made from alloys of various light metals; the production technology is similar, only first it is necessary to make an alloy with the necessary characteristics, and then pour it into a mold. Such discs are more expensive, but their resistance to impacts is much higher, they do not lose their appearance from environmental influences and can be used all year round.
If you replace the R14 steel factory wheels with R15 light alloy rims, then this will be the most compromise solution for Lada Priora owners who want to change the car’s exterior as much as possible at minimal cost. As in the case of R14 wheels, installing R15 rims will not require any intervention in the car’s design, but the appearance will be much more remarkable. The only problem is to choose the right new product and tires for it.
Ideally, you should carefully try a new alloy wheel on your car right at the store. Depending on the configuration, you may need to purchase new, longer wheel bolts as they are not included with the rims. The tire size that can be recommended for installation on an R15 wheel is 195/50; it will not touch the suspension and body parts and is not low-profile enough.
What changed after the replacement?
Changes in the behavior of the car after installing R15 wheels can already be felt. The stability and controllability of the car will increase, sensitivity to small irregularities will decrease (if you do not install low-profile tires). At the same time, sensitivity to ruts in the road surface will also increase, and when driving at high speed into a large puddle, you need to be much more careful, since the contact surface on R15 wheels is larger, the likelihood of skidding increases. The effect of all these factors will be enhanced if the factory wheels are changed to a diameter of R16 or larger.
According to numerous reviews from amateurs and specialists, there are no serious obstacles to installing wheels of increased diameters R16 or R17 instead of Priora wheels. If you do not take into account the cost factor, then the whole difficulty of the operation lies in the exact selection of disks, tires, and bolts. By approaching the problem scrupulously, taking into account all the parameters, especially the offset and the “x-factor”, it can be solved after spending some time.
Car enthusiasts who have installed such wheels claim that the rubber does not rub anywhere, even with the steering wheel turned completely out. The car is very stable in turns, reacts more sharply to steering movements, and better “swallows” small holes and bumps. As for weight, an example is the Slik R16 disc with low-profile tires: 205/45/16-13 kg.
Having studied the market and determined for yourself what wheels you would like to see on your car, take the time to select the right one according to the technical characteristics. In an unforeseen situation, it will always be possible to put factory iron rims back on the Priora, so after replacement there is no need to rush to sell the removed wheels.
What to choose
For each driving style, you need to choose tires that suit your driving style. Prior owners must decide for themselves which summer and winter tires are best to choose.
For those who have a more aggressive driving style, it is better to take wide tires, but the problem is that tires of this type are intended only for asphalt - such tires will not be of any use on dirt or wet country roads. The negative aspects of such rubber are increased noise in the cabin and extreme rigidity, which can have a bad effect on the suspension.
For owners whose style is the most relaxed, it is better to purchase softer tires, designed for soft and comfortable movement on any road. The disadvantages of soft tires are that the steering response is slightly slower or the braking distance may be slightly longer.
As a result, every owner of a Lada Priora should have a summer and winter set of tires. And what brand the tires will be, what the pressure will be and what tires are right for you - it’s up to you and no one else to decide. The main thing is not to violate the recommendations of the manufacturer and not to drive recklessly on the roads - after all, the most important thing in any car is the safety of the driver and passengers.
Source kolesnyigid.ru
The size of tires and wheels significantly affects how a car behaves on the road. Each manufacturer indicates the acceptable sizes of tires and wheels; as a rule, this list is limited to several options. We'll tell you what other tires and wheels are suitable for the Priora besides the factory ones and how this will affect the operation of the car.
General background information
Ranges of possible values for tires and wheels of Lada Priora 2012.
Tires
| Diameter | 14″–16″ |
| Width (mm) | 175–205 |
| Profile (%) | 45–65 |
| The smallest size | 175/65 R14 |
| The biggest size | 205/45 R16 |
Wheel disks
| Diameter | 14″–16″ |
| Width (inches) | 5–7 |
| Reach (mm) | 32–38 |
| Drills | 4×98 |
Expert advice
When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.
- On what roads will the car be primarily used?
- Do you need increased cross-country ability?
- How much of the route will be city roads and how much will be highways?
- Will the vehicle carry heavy loads?
The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.
How to choose the right wheels for Lada Priora 2012?
- Stamped (economical price category) - made from a sheet of iron by stamping on a press.
- Light alloy - manufactured by casting (more reliable than stamped ones).
- Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.
The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.
So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.
It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).
Features of summer-winter tires
Difference between seasonal wheels
The size of tires that are considered suitable for winter and summer are the same, but the difference between them is the composition of the rubber alloy from which the tires are made. It is important to remember that, regardless of climatic conditions, the wheels must provide maximum grip on the road surface.
Summer tires were produced especially for the Lada Priora; such tires remain solid and hard even at extremely high air and road temperatures. Most tire models have characteristics that allow you to drive on wet roads and in rainy weather. There is also rubber protected against aquaplaning. It is worth noting that the tread patterns were designed to effectively drain water while driving, provide stability and reduce noise pollution.
Select your year of manufacture Priora 1.6i 217x
The LADA Priora 1.6i 217x model was produced from 2007 to 2013. Table of factory and suitable tire sizes for LADA Priora 1.6i 217x.
| Make model modification Auto | Year of issue | Width, profile, tire radius | type of instalation |
| LADA Priora 1.6i 217x | 2013 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2012 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2011 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2010 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2009 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2008 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 2007 | 175/65 R14 | Factory |
| LADA Priora 1.6i 217x | 185/65 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/60 R14 | Factory | |
| LADA Priora 1.6i 217x | 185/55 R15 | Acceptable | |
| LADA Priora 1.6i 217x | 195/50 R15 | Acceptable |
Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.
Source
