Bolt pattern for VAZ 2107 - what size wheels and bolt pattern

The appearance of car wheels has a high impact on the overall aesthetic perception. Therefore, many car owners are in a hurry to get rid of the small and inconspicuous stamped steel disk and replace it with a new, impressive-looking aluminum or titanium one.

In addition to improving appearance, replacing heavy stamping with lightweight options brings with it many other benefits. Among them: increasing dynamic qualities and reducing fuel consumption. However, we must not forget that incorrectly replacing disks can also lead to many troubles.

Cast

Today, the best wheels on the VAZ 2107 are considered to be cast products.
They recently came into fashion and quickly gained great popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts. Alloy wheels are highly durable and almost never rust. In addition, their appearance has many differences. Designers take care of the aesthetics of the product, giving it an original look.

If we consider die-cast models from the point of view of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• Soft movement
• Reduced fuel consumption.

For all their advantages, alloy wheels are not without negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. Such parts cannot be repaired.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter.

Any impact is transmitted to the suspension, since alloy wheels cannot absorb external influences by their own deformation. Each driver decides which wheels to install on a VAZ 2107 individually, taking into account future operating conditions.

When choosing, it is very important to consider the car model. For example, wheels for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption

Wheel functionality

In front-wheel drive cars, the disk transfers revolutions to the drive pair. The tire fits tightly on it. The front suspension becomes stiffer due to the correct placement of the tire.

Wheels for the VAZ 2107 are available in several versions. They differ in certain parameters:

• Width.
• Diameter.
• Mass.
• Number of mounting holes.

It is allowed to install wheels of sizes R13, R14 on any VAZ 2107 car. According to the production method, this can be either stamping or casting.

Beginners always ask the question, which discs are best to put on the seven? It will not be possible to answer it in one sentence. Each type has its own advantages and disadvantages.

Selection principles

Wheel bolt pattern on VAZ cars, drilling of disks
The selection of disks is made taking into account the design features of the car and operating conditions, assessing the influence of many factors.

A car with 15 rims looks beautiful, but requires the use of low-profile tires, otherwise the tires will rub against the wheel arch protection. Operation in off-road conditions, maximum loading of the trunk with this option is fraught with negative consequences.

Wide wheels with a long offset increase stability, but tend to heavily pollute the car in bad weather conditions. The large curb weight of the car leads to friction between the tires and the fender liners.

Choosing non-standard wheels means replacing car tires. It is necessary to take into account the acceptable tire sizes for the VAZ-2107 recommended by experts:

• diameter 13-15 inches;
• width 165-185 mm;
• tire profile – 55-80%.

What is the size of wheels for VAZ 2107

DIY wheel storage rack: drawings and rules for storing wheels in the garage

We select rims for the VAZ 2107

The choice of wheels for the VAZ 2107 has always been a subject of debate among car enthusiasts. Dimensions of VAZ 2107 3 1.7i. If you are interested in the sizes of VAZ 2107 tires, as well as the size of the rims on a VAZ 2107 car. Stamped wheels are cheap, durable, undemanding and available at any auto store. But it’s worth trying to improve the appearance of the car. The first thing you want to do is install cast or other alloy wheels on the VAZ 2107.

Therefore, the issue of choosing disks is worthy of detailed consideration.

Wheels for VAZ 2107

Wheels, light alloy (cast, forged, prefabricated) or stamped, perform the same functions:

• transmission of torque to the tires of the drive wheels;
• ensuring uniform tire compaction around the circumference;
• ensuring structural rigidity and correct placement of tires in the suspension.

The “classics” use 13-inch light-alloy and stamped wheels with four mounting bolts. 14-inch wheels can be installed as tuning.

Advantages of stamped discs:

• Price. Riva, VAZ 2108-2109 Samara, VAZ 2110, VAZ 2112-2115: 4 x 98: 25 38: 58.0 Wheel sizes for minibuses. Stamped discs can be replaced with new ones without damaging the family budget. If you leave your car unattended, you don’t have to worry that someone will covet the wheels.
• Plastic. The deformation formed after falling into a hole can be easily eliminated even with a hammer.
• Wear resistance. Despite the low price, the discs, if they are not bent or aligned too often, will last a very long time;
• Unpretentiousness. To restore their appearance, it is enough to “blow out” them with paint or put on decorative caps.

The disadvantage of stamped discs is their heavy weight. The greater the unsprung mass, the faster the suspension collapses and the worse the handling on a bad road.

I want to buy discs and put low-profile tires on them, but I don’t know what the maximum size of discs is for a VAZ 2106. In this regard, stamped wheels are much inferior to alloy wheels.

The second drawback is their susceptibility to corrosion, which is why they need to be periodically cleaned and tinted.

Advantages of alloy wheels:

• Aesthetic appearance. You can choose an original design solution suitable for any tuning idea.
• Resistant to corrosion, thanks to which the discs do not require regular cleaning and painting.
• Less weight, which reduces the unsprung weight of the car. This improves handling and slows down suspension wear. Weight reduction has a positive effect on dynamics and fuel consumption.

Disadvantages of alloy wheels on the VAZ 2107:

• A brittle material that does not bend, but breaks when subjected to a strong impact. VAZ 2106 Lada Car brands Find out what tire sizes Sizes of wheels and rims on the VAZ 2106. If the disk does not split under a strong impact, it still does not bend. Therefore, when rubber on light-alloy wheels gets into a hole, the chances of damage are much higher.
• Shorter service life than stamped steel discs.
• High price and attractive to thieves.

What wheels were installed on different bodies and configurations?

Bolt pattern Niva 2121, about wheel rim pattern on Niva Urban and 21214

When selecting new wheels for any car, including the domestic VAZ-2107, it is necessary to take into account a number of factors specific to this particular model. Traditionally, most cars that rolled off the Volzhsky Automobile Plant assembly line had the most budget-friendly wheel options. The VAZ-2107 was equipped with 13-inch stamped steel elements with standard tires in size 175/70R13.

Starting from 1982 until the end of mass production in 2012, the “seven” was produced in 13 modifications. One of them, namely the VAZ-21077, was developed specifically for export to the UK. In this version, more expensive, alloy wheel versions were installed on it.

Knowing the basic technical parameters of a wheel rim, you can determine its compatibility with a specific car model. In addition to the diameter, you need to take into account such indicators as:

• Rim width.
• PCD – diagram for drilling mounting holes (bolt pattern).
• ET – disc ejection.
• DIA is the diameter of the central hole.

As for the bolt pattern and the central hole, everything here is traditional for the old Tolyatti models. These indicators are strictly tied to the parameters of the hub. In numerical terms, they look like this: 4x98 mm and 58.5 mm, respectively: 4 is the number of fastening points, 98 mm is the distance between the centers of opposite mounting holes, 58.5 mm is the diameter of the hole located in the center of the disk.

Rim width is measured in inches. In the VAZ-2107 this indicator is equal to the values ​​5 and 5.5. Knowing the width of the rim, you can understand how wide the tire should be. In the marking this value is written as follows: 5J and 5.5J.

Full coincidence of the central hole of the disk with the corresponding parameter of the hub helps to accurately center the disk during installation, which has a positive effect on the service life of the tires and eliminates wheel runout when driving.

Which tire should I choose?

Marking of standard tires on VAZ 2107 is 175/70R13 82T.

“175” — tire profile width;

“70” - the ratio of parameters such as the height and width of the tire profile;

“R” is the designation for a radial tire (note that this is not a radius, as most people incorrectly believe);

“13” is the diameter of its landing (namely the diameter, not the radius);

“82” is the load capacity index, which indicates how much pressure can be applied to each tire;

"T" is the maximum speed at which this tire can be used.

This is interesting: What kind of bolt pattern on Ford

Minimum and maximum possible parameters of non-standard disks

So, the smallest disk diameter provided by the VAZ-2107 manufacturing plant is 13 inches. The maximum size should not exceed 15 inches, provided that low-profile tires are available.

The wheel rim must either correspond to the parameters of the VAZ-2107 hub according to PCD - 4x98 mm and according to DIA - 58.5 mm, or its installation will require the use of special adapter spacers. The product with PCD – 4x100 mm can be installed using fasteners with an eccentric.

You can try to get around the 5J-6J rim width limitation by changing the “ET” value. The use of spacers will reduce the size of the offset, which will allow the installation of wider wheels. But the question immediately arises about the appropriateness of these actions.

Giving a more modern look to any older car model is quite appropriate and acceptable in most cases. Changing disks in this sense is no exception. However, if you are carried away by tuning the VAZ-2107, you should not forget about the technical characteristics.

Any re-equipment must be accompanied by an improvement in both appearance and performance. Or at least you should try not to spoil what was originally there.

VAZ 2103-2106

Tire and wheel sizes for daewoo nexia 2011

Wheels of the new model were installed on the “three”. In terms of appearance, they are close to the Fiat wheels used on the 2101 version. They have 16 round holes each with an increased rim width of up to 9.5 inches and a reduced offset of up to 29 mm.

Similar models were used for the VAZ 2103 and VAZ 2106 cars. At the same time, chrome caps from a penny were installed on the 2103 versions, and the original ones were used on the six, which were distinguished by a round black trim in the center.

Initially, for the 2106 model, manufacturers planned to use other versions of disks. However, the intended angular style echoed the design of trendy aluminum (alloy) wheels, so they decided not to use them.

On car releases in 1991, wheel covers from model 2101 were used on rims. Since 1995, developers have removed the protrusions for the hubcaps and began producing rims similar to 2103 for all VAZ car models.

To install the disc on the 5 and 7 Zhiguli model with a chrome cap, the diameter of the centering hole was increased to 60.5 mm. Note that such wheels from 2103 without classic protrusions have become a “national treasure” for the entire AVTOVAZ line.

Wheel and rim sizes for VAZ 2107 2002

By car By tire size By wheel size

Acura Alfa Romeo Alpine ARO Aston Martin Audi Bentley BMW BMW Alpina Borgward Brilliance Bugatti Buick BYD Cadillac Changan Chery Chevrolet Chrysler Citroën Cupra Dacia Daewoo Daihatsu Datsun Dodge Dongfeng DS Eagle FAW Ferrari Fiat Fisker Force Ford Geely Genesis GEO GMC Great Wall Haima Haval Hindustan Holden Honda Hummer Hyundai Infiniti Isuzu Iveco JAC Jaguar Jeep Jinbei Kia Lamborghini Lancia Land Rover LDV LEVC Lexus Lifan Lincoln Lotus Mahindra Maruti Maserati Mazda McLaren Mercedes-Benz Mercury MG MINI Mitsubishi Mosler Nissan Oldsmobile Opel Panoz Perodua Peugeot Plymouth Polaris Pontiac Porsche Proton Qiantu Ram Ravon Renault Renault Samsung Roewe Rolls-Royce Rover Saab Saturn Scion Seat Skoda Smart SsangYong Subaru Suzuki Tata Tesla Toyota Vauxhall Venucia Volkswagen Volvo Vortex ZAZ Zotye VAZ GAZ Lada TagAZ UAZ 115 125 135 145 155 160 165 175 185 190 195 200 205 215 22 0 225 235 240 245 255 265 275 285 295 305 315 320 325 335 345 355 365 / R 10 12 13 14 15 16 16.5 17 18 19 19.5 20 21 22 23 24

The highlighted entries mean factory sizes, the rest are replacement options

Modifications

1.5 1.5i 1.6 1.6i 1.7i

Generation: 2107x Power: 71 hp | 53 kW | 72 PS Engine: I4, petrol Central hole diameter: 58.5 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Generation: 2107x Power: 67 hp | 50 kW | 68 PS Engine: I4, petrol Central hole diameter: 58.5 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Generation: 2107x Power: 74 hp | 55 kW | 75 PS Engine: I4, petrol Central hole diameter: 58.5 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Generation: 2107x Power: 74 hp | 55 kW | 75 PS Engine: I4, petrol Central hole diameter: 58.5 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Generation: 2107x Power: 79 hp | 59 kW | 80 PS Engine: I4, petrol Central hole diameter: 58.5 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012

Parameters of standard nuts and bolts

M12x1.25 bolts were used as fasteners in the VAZ-2107. As a replacement, you can use studs with nuts. Both bolts and nuts have a pressure shaped surface under their heads. The choice of nuts and bolts according to the shape of the clamping surface is made in accordance with the shape of the seat of the mounting points on the disk being installed. The use of fasteners that do not comply with this requirement is unacceptable.

The material of alloy wheels is much softer than steel. For this reason, an increase in the contact area with the clamping surface of the fastener is required. But, even if everything is selected and tightened correctly, during the first time of operation you should regularly tighten the bolts or nuts until the metal has completely settled and compacted in the drilling areas.

Standard wheel sizes VAZ 2107 1.6i 2107x

The VAZ 2107 1.6i 2107x model was produced from 2002 to 2012. Table of standard and suitable wheel sizes for VAZ 2107 1.6i 2107x.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Useful articles and reviews Announcements of certificate drawings among subscribers. Subscribe to VK group

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

General background information

Ranges of possible values ​​for tires and wheels of VAZ 2107 2004.

Tires

Wheel disks

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for a VAZ 2107 2004?

3 types of rims:

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

© 2019-2021 Avto Sprav. Directory of factory parameters of disks and tire sizes.

Attention! Our catalog is an information resource and does not guarantee full compliance of the proposed dimensions with your car. Make sure that your car has wheels of the appropriate radius.

Source

Corrosion protection

For reliable operation of the chassis, everything is important: the bolt pattern, the dimensions of all components, the alignment/camber settings, and even the protection of the arches from corrosion. It is the arches that are more susceptible to adverse factors than other parts of the body - from ordinary moisture during rain to reagents on winter roads

To ensure reliable protection of the arches, it is best to install lockers (fender liners) on the VAZ 2110. Such protection will cost much less than subsequent repairs of rusted arches

It is important to choose the correct size of the lockers and ensure their tight fit in the area of ​​the arches

We hope that by completing all the repair work yourself, you will provide your VAZ 2110 with many years of trouble-free service on the road.

All car enthusiasts come into contact with the installation or replacement of wheel rims. Sooner or later, for various reasons, most car enthusiasts were faced with the problem of choosing new wheels. The reasons may be different - damage to the standard disk, tuning in the form of installing disks of larger diameter, other reasons.

When replacing, you should be guided by certain compatibility parameters; not every disc, even one of a suitable radius, will fit any car model. One of the important parameters when choosing rims is their bolt pattern.

Compatibility of VAZ 2107 on wheels with other Lada models

The drilling rate of 58.5 mm and the bolt pattern of 4x98 mm are ideally combined with all other VAZ models with the exception of the Niva, which has moved from the category of compact runabouts to SUVs. However, it should be taken into account that on all later car models, starting with the VAZ 2108 and 2109, the width of the wheel arches changed slightly, as well as a different suspension design was used.

So, disks from the “nine”, of course, can be installed on the “seven”, but here you should remember about the important indicator ET - the offset of the disk relative to the point of its attachment to the hub, namely, when this dimension in the VAZ 2107 is from 23 to 34 mm , the VAZ 2109 fits wheels with parameters of 35-40 mm, and some products may not be compatible with the technical characteristics of the “Seven” body.

In conclusion, car enthusiasts should be reminded that the “Seven” has not left assembly lines for 6 years, and the newest modification is the same age. This means that its value on the market cannot exceed 200 thousand rubles. as of the end of 2022, and good forged wheels with radius R16 and R17 have a price of 10 thousand rubles. per wheel, which in combination with high-quality tires can exceed 30-35% of the cost of the car itself.

Therefore, when operating such vehicles, the most optimal solution would be to install inexpensive stamping with factory specifications and cover it with simple caps made of plastic or rubber, and the VAZ 2107 wheel rim will look as impressive as the car brand can allow, and the driver will not have to select an exclusive one according to compatibility.

Features of wheel sizes for the most popular VAZ models

Among several dozen VAZ modifications, the most popular models over the entire 50 years were only 2 of them, as can be judged by the number of copies sold. The wheel sizes for these cars had the following parameters, which varied depending on the year of manufacture, technical equipment and equipment of the car:

• VAZ is the latest modification of the “classic”, produced on the plant’s conveyors for 30 years: from 1982 to 2012. During this time, it never changed its appearance, and the disc bolt pattern was the same - 4x98 with a central hole diameter of 58.6 mm.

The width of the rim varied slightly depending on the model year.

If in 1982 the plant produced models with tire dimensions ranging from 5J to 5.5J, then at the end of production the concern increased the permissible size to 6J.

You might be interested in Domestic alloy wheels for cars

The radius of the wheels invariably varied from R13 to R15, which made it possible to alternate them by season, periodically changing the side profile of the tire, or immediately use all-season tires with a diameter of R14.

The VAZ 2107 tire size invariably consisted of only 3 main parameters - 175/70/R13, 185/60/R14 and 185/55/R15. The last of the listed parameters was actively in demand among lovers of fast driving on smooth city roads.

On a note.

As for the R13 rubber, it allowed the driver to feel as comfortable as possible when driving over rough terrain, as well as in winter, when the high cord profile took part in adhesion to the road surface. But the most popular parameter remained the universal size R14 and the largest number of tires were sold in this dimension.

If we look at the concern’s earlier cars, we can see that the wheelbase of the Zhiguli has remained virtually unchanged for more than 40 years. This leads to moral backwardness of the technical equipment of the plant's products. At the same time, the lack of new developments greatly reduces both the speed of release from the assembly line and the cost of engineering equipment, which leads to a very attractive retail price for the vehicle.

• VAZ 2114. Produced in a smaller range - from 2001 to 2013. The car was just a restyled modification of the classic “nine”. The legacy of the outdated model did not affect the high popularity of this Lada, and all the wheels that were installed on hubs in the basic version had the same traditional bolt pattern 4x98, DIA 58.6 mm.

European standard bolt pattern 4x100 for Lada X-Ray

• Like the bolt pattern of the VAZ 2114, the width of the wheel rims was not much different from the “seven” and fluctuated between 5J – 6J for the entire production period. As for radius, the concern has completely eliminated the 15-inch diameter from the factory equipment, without prohibiting drivers from installing this parameter as an option. The bolt pattern of VAZ 2114 wheels in the current size also made it possible to install standard 4x100 wheels in accordance with the sizes usual for Europe.

Not a single Lada model has ever looked aggressive; the hallmark of the product was practicality and reliability in operation. The concern did not use extreme overhang indicators, and the wheels were always hidden under the body arches. The average ET limit values ​​for both VAZ 2107 and 2114 were ET25...35 mm, and deviations from this characteristic obligated drivers to install additional mudguards on the side parts of the body and change the design of the hubs, making them more durable to avoid deformations.

Important!

The bolt pattern of the VAZ 2114 wheels, as well as all other dimensions of the hub and disks, were used on the brand’s followers - Kalina and Priora. With the arrival of new management at the domestic concern, this parameter ceased to exist altogether, since the plant had a new orientation to the West and possible import of products to the nearest CIS countries.

5 studs on VAZ 2121 wheels

Acceptable parameters of non-standard disks

Tuning of the VAZ 2107 is carried out based on the design parameters of the car. The pursuit of stylish design should not be in dissonance with the requirements of safety and comfort.

The table below illustrates some selection criteria (standard indicators are highlighted in bold):

The central hole for the VAZ 2107 should have a diameter of 58.5 mm. The use of larger discs is possible using a special adaptive ring.

Connoisseurs of extreme design and low profile should take into account the permissible limits of experimentation:

• disc diameter from 13 to 15 inches;
• reach 24-34 mm;
• rim width 5-6 inches;
• central hole 58.5 mm;
• The bolt pattern is strictly 4x98.

When choosing an offset, you need to remember that wide rims require a smaller offset value.

Knowledge of the design features of the VAZ-2107 and compliance with technical operation standards allows you to choose attractive wheel models without reducing the technical characteristics of the car and threatening driving safety.

Bolt pattern compatibility table for Zhiguli wheels

Taking into account the above descriptions of bolt patterns, they can be easily combined into one informative table, according to which every car enthusiast who owns one or another Lada model will always be able to choose the correct wheel rim parameters.

This table of correspondence of geometric characteristics to brands and modifications of domestic cars is given below:

You may be interested in Parameters of stamped and cast wheel rims for Ford Focus 3

Important!

This table is often included in the algorithm of specialized programs associated with a warehouse accounting database.

Interior of rims for VAZ cars

The bolt pattern of VAZ wheel rims is a very important indicator of the model, which significantly limits the range of products offered for sale. If the driver suddenly takes a fancy to a disc that has different characteristics, he will have to completely change the design of the hub and install the studs in a new order. Experts say that such a practice is fraught with unpredictable consequences during the operation of the vehicle.

Proper sound insulation of car doors - what's the secret?

It is the doors in the car that are the weak point through which noise penetrates most into the interior.

You can ignore this if frequent use of the car is not your habit, otherwise extraneous sounds will be annoying and disturbing. Do-it-yourself soundproofing of car doors can reduce the noise level significantly, and you can do everything yourself

Therefore, it is better to accompany all your actions with detailed notes. You can also schematically sketch the location of the screws on whatman paper and attach each unscrewed fastener to the paper with tape. This way, no one will get lost or forgotten. It is better not to disassemble the window lifter and door opening and closing mechanisms, since putting them back together is quite difficult, and they will not interfere with sound insulation. The second step is to remove the factory soundproofing materials from the door wall. The surface after dismantling must be degreased and clean.

Syverlovka and bolt pattern of VAZ wheels

Wheel bolt pattern on VAZ 2107

The design of the seven involves drilling 4x98 wheels, where the number 4 indicates the number of bolts, and 98 indicates the diameter of the holes on the disc structure.

Many foreign cars use a bolt pattern with similar parameters – 4×100. In the first situation, the distance between the centering bolts is 69.3 mm, and in the second case - 70.7 mm. The error is 1.4 mm and does not allow for tight fixation of a non-standard disc.

In addition, installing a car disk with non-standard parameters can lead to deformation of elements, namely mounting holes and bolts.

There are other methods for attaching 100x4 rims to the seven. For example, you can use extended bolts, adapter rings, studs and eccentrics. However, these parts can ultimately complicate or impair the mounting of the wheel product.

Therefore, it is recommended to install standard car wheels and tires so as not to lead to wheel imbalance and vibration while driving.

Wheels on the VAZ 2107 are equipped with 13-inch stamped wheels or analogues with identical parameters. Tires have dimensions 175/70/R13.

The nominal pressure in “seven” tires directly depends on the tire sizes:

175/70/R13 – 1.9 rear, 1.6 front wheels;

165/80/R13 – 2.0 rear, 1.7 front.

Wheel bolt pattern on model 2106

For a six, the wheel bolt pattern is 4×98. As for the factory dimensions of the disks, then:

• standard width is 5.0J,
• centering hole 58.5 mm,
• departure ET

Tire size for the six is ​​175/70/R13.

As a restyling, you can install wheels 185/60/14, 195/50/R15.

Drilling on the VAZ 2109 model

The VAZ 2109, “nine”, has factory settings for the wheel bolt pattern of 4×98. The factory equipment was equipped with 175/70/R13 tires and 13-inch wheels.

Wheel bolt pattern on VAZ 2110

The tenth VAZ model is equipped with factory stamped 13-inch wheels and 175/70/R13 tires. There were also dozens of configurations with 14-inch casting and 175/65/R14 tires.

As for the dimensions of VAZ factory wheels, the width is 5.0-5.5J, drilling is 4×98, as on other models, the centering hole is 58.5 mm and the offset is ET 37-40.

Drilling on 2111

The Lada station wagon 2111 was equipped with 13 or 14-inch wheels from the factory, depending on the vehicle's configuration. Both options could be used.

Tire sizes: 175/70/R13, 175/65/R14, rims: width 5.0J, drilling 4×98, centering hole 58.6 mm, offset ET40.

Drilling on the VAZ 2114 model

Lada Samara 2113, 2114 cars were equipped with factory stamps with a 4x98 drill bit.

As for the rims, the offset was ET40, width 5.0 J and centering hole 58.5 mm. Wheels 175/70/R13.

Drilling on the VAZ 2115 model

The fifteenth model Lada 2115 is equipped with factory stampings with dimensions of 13 and 14 inches, and a 4 × 98 drill.

As a restyling option, you can use car tires:

205/45/R16;

195/50/R15;

185/60/R14.

Drilling on the VAZ 2121 model

The first Russian SUV Niva from VAZ or Lada 4x4 is equipped with 16-inch steel factory wheels and tires with sizes 175/80/R16 and 185/75/R16.

Disc dimensions: offset ET40, drilling 5x139.7, centering hole 98.6 mm and width 6.5J.

Wheel bolt pattern on a Niva Chevrolet car

The Russian Niva Chevrolet SUV is equipped with factory-made 15- and 16-inch rims with drilling parameters of 5×139.7, offset ET40-48, centering 98.6 mm and width 6-6.5J.

Wheel sizes: 205/75/R15 and 215/65/R16.

Answers (2)

Follow the answers to this question

• Bolt pattern 4X98.

  Petr Expert The future lies with AvtoVAZ!

  10/12/2014 at 18:00

• During its existence, the VAZ 2107 was equipped only with 13-inch stamped wheels. The tires had the following parameters - 175/70 R13.

  Wheel sizes - the most important parameters: bolt pattern 4X98, offset ET 29, width - 5.0J, centering hole CO 60.1

  wheelman I know everything about tires and wheels

  10/12/2014 at 18:08

Similar questions

This is interesting: When do you need winter tires in Finland?

What is the size of wheels for VAZ 2107

We select rims for the VAZ 2107

The choice of wheels for the VAZ 2107 has always been a subject of debate among car enthusiasts. Dimensions of VAZ 2107 3 1.7i. If you are interested in the sizes of VAZ 2107 tires, as well as the size of rims on a VAZ 2107 car.

Stamped wheels are cheap, durable, undemanding and available at any auto store.

But it’s worth trying to improve the appearance of the car. The first thing you want to do is install cast or other alloy wheels on the VAZ 2107.

Therefore, the issue of choosing disks is worthy of detailed consideration.

Wheels for VAZ 2107

Wheels, light alloy (cast, forged, prefabricated) or stamped, perform the same functions:

• transmission of torque to the tires of the drive wheels;
• ensuring uniform tire compaction around the circumference;
• ensuring structural rigidity and correct placement of tires in the suspension.

The “classics” use 13-inch light-alloy and stamped wheels with four mounting bolts. 14-inch wheels can be installed as tuning.

Advantages of stamped discs:

• Price. Riva, VAZ 2108-2109 Samara, VAZ 2110, VAZ 2112-2115: 4 x 98: 25 38: 58.0 Wheel sizes for minibuses. Stamped discs can be replaced with new ones without damaging the family budget. If you leave your car unattended, you don’t have to worry that someone will covet the wheels.
• Plastic. The deformation formed after falling into a hole can be easily eliminated even with a hammer.
• Wear resistance. Despite the low price, the discs, if they are not bent or aligned too often, will last a very long time;
• Unpretentiousness. To restore their appearance, it is enough to “blow out” them with paint or put on decorative caps.

The disadvantage of stamped discs is their heavy weight. The greater the unsprung mass, the faster the suspension collapses and the worse the handling on a bad road.

I want to buy discs and put low-profile tires on them, but I don’t know what the maximum size of discs is for a VAZ 2106. In this regard, stamped wheels are much inferior to alloy wheels.

The second drawback is their susceptibility to corrosion, which is why they need to be periodically cleaned and tinted.

Advantages of alloy wheels:

• Aesthetic appearance. You can choose an original design solution suitable for any tuning idea.
• Resistant to corrosion, thanks to which the discs do not require regular cleaning and painting.
• Less weight, which reduces the unsprung weight of the car. This improves handling and slows down suspension wear. Weight reduction has a positive effect on dynamics and fuel consumption.

Disadvantages of alloy wheels on the VAZ 2107:

• A brittle material that does not bend, but breaks when subjected to a strong impact. VAZ 2106 Lada Car brands Find out what tire sizes Sizes of wheels and rims on the VAZ 2106. If the disk does not split under a strong impact, it still does not bend. Therefore, when rubber on light-alloy wheels gets into a hole, the chances of damage are much higher.
• Shorter service life than stamped steel discs.
• High price and attractive to thieves.