Bolt pattern of Lada Granta liftback wheels: which wheels are suitable, tire and wheel sizes

Wheels on a car are, without a doubt, one of the main components of the entire structure.

Currently, the AvtoVAZ concern installs wheels and tires of various diameters on the Lada Granta model range, depending on the configuration of a particular car.

In this article we will take a closer look at which tires and wheels are best suited for this model from the Russian manufacturer, as well as how increasing the diameter and width of the wheel from the “stock” one affects the car’s behavior on the road.

Factory tire and wheel sizes

In most cases, the Lada Granta is equipped from the factory with “stamps” and light alloy wheels with a radius of 13 and 14 inches, but not so long ago they also began to be equipped with 15-inch wheels.

Lada Granta in the “Standard” and “Norma” configurations were equipped with 13 wheels. But you need to look at the size of the front brake disc, it can be 14th wheel radius

These durable steel wheels consist of a rim onto which the tire is directly attached. This entire structure, or rather its elements, are connected to each other using strong welding. And for convenience during operation, each disc contains information about the width of the rim profile, the moment of disc departure and other indicators.

After a certain point in time, the wheel rims will need to be checked for lateral and radial runout. Such maintenance should certainly be carried out at tire service stations or technical service stations. service.

Wheel rim bolt pattern on Lada Granta

The manufacturer advises installing wheels on the Lada Granta with a diameter (A) of 13 to 15 inches, with a profile width (B) of 5-6 J, with an offset (ET) of 33 to 38 millimeters, with the usual AvtoVAZ bolt pattern - PSD 4*98 ,DIA 58.5 .

All these parameters are most clearly presented in this picture.

Table of ideal wheel and tire parameters

Thanks to this table, you can select the optimal tire and wheel parameters.

A little about wheels

Tires - Today, these are one of the most high-tech products on which safe and comfortable movement by car directly depends.

There are a large number of tires on the market today from many different manufacturers. They consist of a frame, a protector and a breaker layer between them.

And also the toughest part of the tire - the bead, which is designed for reliable fixation and sealing on the rim.

Disks - In the modern world, a wheel includes two parts: the rim - which is a surface closed in a ring with sides on which the tire is fixed, and the disk - which is a support for the rim with holes for fixing the entire wheel to the hub, most often using bolts or hairpins. Currently, there are the following types of discs: stamped, cast, forged, composite and combined.

What is the effect of different tire and wheel sizes?

View of Lada Granta with different types of tires

In order to more clearly understand how the appearance of a car will change depending on the type of tires and wheels, we offer a collection of pictures.

R13

Lada Granta on 13 wheels

Lada Granta on 13th radius wheels

R14

With R14 wheels

R15

With R15 wheels

R16

With R16 wheels.

R17

With R17 wheels.

Survey

Loading …

Source: https://carfrance.ru/rekomendovannyj-razmer-shin-i-kolyos-dlya-lada-granta-foto/

White kick torus for VAZ 2114.

Wheels "Torus" R15 and the entire series have a modern design. Imported priming and varnishing, three-layer nanocoating on a special conveyor make car wheels from “KiK” almost invulnerable to UV rays and rust, wear-resistant and durable.

Discs "Torus"

Domestic is one of the leaders in the country's market among light alloy wheels. However, Torus disks are in demand not only within Russia, but also abroad. This is explained by the highest quality of wheel components, excellent design and quality of products created by the KiK brand.

Replica and original alloy wheels for cars are in demand among consumers. They are beautiful and do not require replacement for a long time. Even under difficult operating conditions, there is no need to take special care of the casting. Unlike a die, a cast replica is lightweight. This guarantees:

• improved maneuverability;
• improved acceleration dynamics;
• reduction in gasoline consumption.

“Torus” wheels made of aluminum alloy are more in demand. Thanks to the special qualities of the metal from which the discs are made, the products have the highest wear resistance and protection from the aggressive action of the atmosphere. This is explained by the fact that the aluminum surface is covered with an oxide film, which creates protection. Dirt can negatively affect aesthetics, which is why the discs are varnished.

Typically, the sale of aluminum castings is carried out for certain brands of cars. In order not to cause harm, you need to study the car's instructions before purchasing rims; car rims must match the vehicle. Knowing the make of the car, as well as the year of its manufacture, you can choose car wheels that meet all the criteria. When selecting components, relying solely on the eye, you can make a mistake with labeling.

Magnesium is also used to make alloy wheels. True, such products are not so in demand. They quickly rust and are destroyed by chloride compounds used by utilities on roads in winter. Because of them, stains can form on magnesium models, and the discs will quickly begin to deteriorate.

Lada Granta wheels: standard dimensions, diameter, bolt pattern, width, offset, center

The domestically produced car Lada Granta is very popular among many car enthusiasts in our country.

In accordance with this circumstance, the demand for all components and spare parts for this AvtoVAZ model is also increased, including rims, the replacement of which is associated both with the wear and tear of old options and with the desire to change the appearance of the car.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

What wheels were installed on different bodies and configurations?

In four different configurations of Lada Granta, the diameter of the wheels used ranges from 13 to 16 inches:

• Standard - 5Jx13ET35, 5Jx14ET35, 6Jx14ET
• Standard - 5Jx14ET35, 6Jx14ET
• Lux – 5Jx15ET35, 6Jx15ET
• Sport - 5Jx15ET35; in the sports package they also began installing wheels with a 16 radius and low-profile tires in size 195/50R

The first digital designation of these markings indicates the width of the rim in inches, the following indicators from 13 to 16 are the diameter of the disk, ET35 is the offset in mm.

The standard bolt pattern parameters are the same as those of old VAZ models - 4x98, that is, 4 holes, the centers of which are located along a circle with a diameter of 98 mm.

The diameter of the central hole according to the hub used is 58.6 mm. The most popular rim size among Lada Granta owners is considered to be R14, but many people prefer to drive on 15 rims.

Standard disk sizes

When talking about wheel sizes, it is not enough to just mention their diameter. The remaining parameters are important for understanding whether they are comparable to the hub of a Lada Granta car, as well as what type of tire they are intended for.

For example, rim width is the size of the tire seat. The mounting hole pattern gives an idea of ​​whether additional spacer adapters will have to be used. As noted above, this car uses a 4x98 wheel installation scheme with a center of 58.6 mm.

Disc offset is a fairly important indicator, especially when using wide wheels. It reflects in mm the distance from the hub mounting pad to the plane that visually divides the rim into two rings of equal width. Disc diameters are measured in inches.

As standard, the Lada Granta is equipped with sizes R13, R14, R15. It is rare to find a model with 16 discs.

The table shows the recommended tire sizes and the corresponding wheels.

TiresWheels

The numbers indicated through a fraction in the tire size mean: tire width / profile height as a percentage of the width. The Latin letter “R” indicates the type of tire - radial. The last numbers correspond to the diameter of the disk.

Parameters of standard nuts

One of the main parameters of nuts or bolts is the shape of their pressing surface, which can have several varieties. When selecting the necessary nuts, you should proceed from the shape of the recess in the mounting hole of the disk.

Most often it is necessary to use bolts or nuts with a cone-shaped clamping part. As a rule, the cone has an angle of 60°. Sometimes such bolts may have a 1.3 mm head and a nose at the end of the nut.

The clamping surface of the fastener can also be flat or hemispherical. It is important that the clamping planes of the fastener and the disk fully correspond to each other. Otherwise, over time, as a result of strong dynamic loads, the attachment point will weaken. When choosing nuts with closed heads, you should pay attention to their length.

If the pin prematurely rests on its inner part, then it will not be possible to fully tighten it. Also, nuts that are too short may not leave room for the socket head of the impact wrench. Some wheel models only allow the use of hex or star nuts.

When choosing bolts, you need to consider their length. A reliable connection can only be achieved if the bolt is screwed in to the entire threaded thickness of the hub. However, if it is too long, then when the car moves, such fasteners will begin to cling to internal structures.

Ideally, the tip of the bolt should only protrude a couple of threads when fully tightened. Bolts are made only from steel, but nuts can be steel, aluminum or titanium.

What drives can be installed

It is clear that any car manufacturer, just like AvtoVAZ, always recommends installing only its original sets of spare parts. But replacing a wheel rim with non-standard samples has long been considered completely commonplace.

Let's summarize all of the above

• If you do not drive at very high speeds, are limited in money and the roads in your city are not of very high quality, feel free to purchase steel wheels for a VAZ Granta (but together with decorative caps).
• If the “appearance” of a car is of paramount importance to you and high-speed driving is not alien to you, then it is best to purchase alloy wheels. But you must be prepared for the fact that they may burst - then you will need to buy new ones, because alloy wheels cannot be repaired.
• If you are a fan of sporty driving and high speeds, then only forged wheels on the VAZ Granta will be the optimal solution for you. Their unique properties will allow them to be used for a very long time even under intense loads, because it is almost impossible to disable them. But the very high price of such wheels is the only drawback that prevents everyone from buying them.

Our conclusions are advisory in nature - each car enthusiast decides for himself what suits him best. The online store for rims Kolesa Darom can make your task easier with an online selection of rims by car brand directly on its website. Thanks to this service, you can quickly and easily purchase wheels that are optimal in price/quality/appearance for your car. This will allow it to become more functional, reliable and attractive!

Since its enchanting appearance on the expanses of the domestic market, the Lada Granta has acquired the status of “people's car,” which is not at all accidental. When creating this model, the manufacturer deliberately took into account the entire list of nuances of Russian operating conditions, including the quality of road surfaces.

The developers managed to achieve harmony in the Lada Granta's external appearance with the internal architecture of the cabin space. For example, let’s take as an object of consideration the 15mm rims that the plant kindly equipped the domestic model in the serial “Luxury” version.

The geometric and other parameters of the wheels, including diameter, weight, offset, etc., were not only able to perfectly match the power characteristics of the car, but also give the exterior a more harmonious appearance. It’s unlikely that anyone would want to dispute the stylish appearance of the Lada Granta, “shod” with 15mm wheels.

Lada Granta wheels

Lada Granta is a pretty new car. The first Grants appeared a couple of years ago and did not arouse much trust or interest, as the very ambiguous reputation of the manufacturer itself was reflected.

However, at the moment the Lada Granta is the best-selling car in all regions of the Russian Federation in its price segment.

In addition to the growing demand for the car itself, interest in consumables and car components, in particular, wheel rims, began to increase. The insufficient quality of roads in the Russian Federation leads to rapid wear or deformation of the disks, and yet choosing a high-quality sample for the Grant is not so easy!

What kind of disks can be installed?

The manufacturer recommends installing only the original set of disks on the Grant, however, many drivers often resort to installing analogues of non-standard parameters.

In the case of installing non-original rims or tires, it is necessary to take into account the characteristics of the vehicle: with the correct selection, the car’s handling will improve and the cost of components will decrease, if incorrectly, you will have to buy other new parts or repair the chassis and suspension in the near future.

This is interesting! Drivers operating the Lada Granta have more than once noticed that the original set of wheels for winter tires does not always successfully cope with the assigned tasks. Many drivers recommend choosing wheels for the winter with the narrowest form factor possible, which should have a positive effect on the vehicle’s handling.

FakeHeader

Comments 19

you have a slightly different model of tori, they are narrower, not the disks themselves, but the pattern

I also noticed the circle itself, the center is smaller and the spokes are narrower...why?

Bought expensive!) New ones for 16, cost 55,000))

here in Shym)

21 rubles for casting? o_O yes, what are your prices?

do you mean cheap?

almost for nothing?! If you convert it to rubles it comes out to 21250. in TLT a set of new ones costs 13500.

Ours costs 90,000

almost for nothing?! If you convert it to rubles it comes out to 21250. in TLT a set of new ones costs 13500.

In the last few years, K&K Torus wheels from 14 to 17 radius have begun to gain popularity among the people. From the factory, LADA Priora with a radius of 14 is equipped with such discs. However, if you look, on the streets of many cities you can find Prioras with Toruses of 16 and 17 radius. It certainly looks impressive, but too large a radius of the disc negatively affects the quality of travel and the service life of the car’s suspension.

Video - New LS wheels and Pirelli tires on Grant

Tire size is one of the most important parameters that can significantly change the behavior of a car on the road. In our review we will tell you about the permissible tire size on the Grant, as well as what the size of the tires affects during the operation of the car. Let's start with the tire and wheel sizes allowed by the manufacturer.

How can I find out about the disk parameters myself?

The technical passport of a particular car contains information not only about what factory wheels it has, but also contains instructions for installing them. If this useful guide is not nearby, then you can arm yourself with a ruler and visually determine the characteristics of interest.

If you need to choose 15-inch wheels, you must have knowledge regarding such parameters.

1. “ET” (offset) - denotes the numerical expression of the distance between two planes, or more precisely: the surface of contact with the hub and the vertical plane of symmetry of a particular product. The indicated value is intended to indicate how much the disk is able to “peek out” from under the wing. The parameter affects the degree of stability of the car. Typically, the numerical criterion for overhang starts at 40 mm.
2. “DIA” is the diameter of the hole that allows the wheel to fit onto the hub surface. When choosing a product, you should take into account the corresponding hub parameter. The measurement is carried out in millimeters.
3. Bolt pattern (in our version 4x98). The first number in the formula means the numerical composition of the fastening bolts, and the second is the diameter, on the line of which the centers of the holes for fasteners are located.
4. Disc width. This ordinary characteristic is usually expressed in inches. For LADA Granta the following values ​​are valid: 5; 5.5 and 6.

Armed with the above information, even an inexperienced owner will be able to select a suitable set of disks, thereby replacing the factory disks.

The next thing to consider might be the type of 15-inch wheels you plan to purchase. Let us remind you that these products are forged and cast (we do not take into account stamped ones). Here the main criterion will be the owner’s budget.

Is it advisable to pay attention to alloy wheels?

Casting has long been popular, including 15-inch versions for LADA Granta. Compared to analogues, these products have several advantages:

• a lot of various offers on models and manufacturers;
• light weight, providing a slight increase in dynamic capabilities and reduced fuel consumption;
• more affordable cost compared to forged analogues;
• the use of corrosion-resistant alloys in the design, which allows the product to provide a decent service life.