What wheels are better to install on a VAZ 2112

What tire sizes does the manufacturer recommend to install?

The standard size depends on the body type. Moreover, all cars without exception used discs with a hub diameter of 58.5 mm. The amount of overhang could fluctuate - within 37-40 mm. The rim width is also typical - 5-5.5J. The most common model is 2110. This digital combination is used to mark a car with a sedan body.

The manufacturer recommends the following sizes:

• 2110, 21101, 21102 – 175/70 R13;
• 21103, 21104 – 175/65 R14.

"Razboltovka" - 4x98 mm. A special modification is the VAZ 21108 Premier car. The car was produced for a relatively short time - from 1999 to 2001. The only difference from previous versions is that alloy wheels with a diameter of 13 inches were installed at the factory. There are no fundamental differences for station wagon cars.

The issue was carried out between 1997 and 2004. The wheels installed at the factory differed depending on the modification of the car and the marking of the specific model:

• 2111 – 175/70 R15;
• 2111i-2114 – 175/65 R14.

Hatchbacks were produced, like most other cars in this series, until 2004. The diameter of the wheels and their dimensions also differed slightly depending on various factors:

• 2112 – 175/65 R14;
• 21122 – 175/70 R13;
• 21124 – 175/65 R14.

Using tires of standard size and diameter will avoid damage to the body and other troubles. However, the automaker suggests the possibility of installing custom-sized wheels.

Selection by car model, tire or wheel size

By car By tire size By wheel size

The highlighted entries mean factory sizes, the rest are replacement options

Modifications

1.5i 16V 1.6i 1.6i 16V 1.8i

VAZ 2112 2007 1.5i 16V

Generation: 2112x Power: 93 hp | 69 kW | 94 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.6i

Generation: 2112x Power: 80 hp | 60 kW | 82 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.6i 16V

Generation: 2112x Power: 89 hp | 66 kW | 90 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.8i

Generation: 2112x Power: 97 hp | 72 kW | 98 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Sizes of wheels, tires and disks of VAZ 2112 of other years of production

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

This is interesting: How to drive on winter tires

What non-standard sizes can be supplied?

Installing wheels with a diameter or width larger than the standard size may cause a malfunction. Before purchasing, you must ensure that the installation is safe. A good solution is a preliminary “trying on”. You should install the wheels before purchasing. It is especially important to check the front tires: they should not touch the fender liners or the car body.

Often, too high a tread height leads to contact with the fender liners. This can have serious consequences:

• damage to the plastic of the wheel arches;
• mudguards become damaged and cease to perform their function;
• Cavities and rust appear at the points of contact between the tread and the paintwork.

The latter is especially dangerous. Since unprotected metal rots quickly, literally within 1 winter. AvtoVAZ cars have never been famous for their high-quality anti-corrosion treatment. Also, increasing the weight of the wheel by literally a few kilograms will lead to accelerated wear:

• wheel bearings;
• shock absorber struts and other suspension elements.

The manufacturer allows the installation of the following non-standard tire diameters on VAZ 2110 vehicles and modifications:

The diameter of R14 is typical and relatively small. It is allowed to use tires with a tread width of up to 185 mm and a height of up to 75-80. Tires with a diameter of 15 inches are also usually installed on this car without any problems. R16 is a tire that requires some driving skill. Since this diameter is not standard, the machine is not designed for this weight and size.

R17 and R18 can only be installed after some modification using a special roller - the wheel arches simply “roll out”. This will avoid contact between tires and body parts. Also, constant friction of the tread on the fender liners will cause the pattern to quickly wear off and lead to deterioration of the wheel’s grip on the road.

Suitable sizes

And yet, if a car owner decides to install alloy wheels on his VAZ 2109 or 2110, he must first understand the possible size options that are acceptable for installation without changing the design of the car. For VAZ 2109 and 2110 tires with a diameter of 14 inches (R14), wheels with a width of 6 inches and an offset of 35-40 cm are most suitable, but wheels with a size of 265 65 r17 are not suitable. Similar models are marked J6.0 ET 35-40, respectively. You can install wheels with a difference of 1 inch to one side or the other from the standard, that is, R13 and R15 are also suitable options. With a strong difference, one can note such an unpleasant effect as friction of the wheel on the wheel arches and fender liners on sharp turns, as well as wear and tear on the car's running parts.

What is the tire pressure

It is important to constantly monitor the tire pressure - this will avoid difficulties when operating the car.

It should be noted that for different tire sizes the value may differ slightly:

• 175/70 R13: for front wheels – 1.9 MPa, for rear wheels – 1.9 MPa;
• 175/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa;
• 185/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa.

Some drivers deliberately inflate the front wheels below the manufacturer's specified value. Main reasons:

• less load is placed on the suspension;
• minimal feedback to the steering wheel when hitting bumps or other road irregularities.

However, low blood pressure causes:

• deterioration of management;
• quick “grinding” of the tread along the edges of the tire;
• increased gasoline consumption - by 10-15%;
• uneven axle load.

Excessively high blood pressure also causes problems. For example, when heated to 60 degrees Celsius or higher, the wheel may simply burst.

Advantages and disadvantages of low profile tires

With low-profile tires installed, the vehicle's maneuverability and controllability are significantly improved - this is especially noticeable when cornering. The steering wheel becomes “sharper” and the car practically does not deviate from the trajectory due to the fact that the low sides of low-profile tires crumple less under lateral loads on the tire.

But when driving on a bad road, such wheels transfer much more shock loads to the body than standard-sized tires, and absorb various road defects less well.

It is worth noting that a tire with a low profile is quite easy to “punch” to the disk even on a small pothole and at low speeds, and the edge of the alloy wheel can become wrinkled and completely fail when using such tires.

Also, it would not be amiss to mention that according to traffic rules it is prohibited to operate vehicles with tires whose characteristics do not correspond to the vehicle model. However, experience shows that traffic police officers usually have a calm attitude towards tuned VAZs with alloy wheels “14”.

And this is not surprising, because R14 wheels are standard equipment on cars of the VAZ 2110 family, the chassis of which is similar to the VAZ 2108, 2109, 21093 and 21099 models. But with R15 alloy wheels, the likelihood of running into trouble when passing a technical inspection is much higher.

Source 5net.ru

Tire sizes according to the VAZ 2110 model. Table of standard, factory tire sizes for VAZ 2110

• What size tires can be installed on a VAZ 2110.
• Acceptable (standard) and recommended tire sizes for VAZ 2110
• Maximum and minimum tire sizes VAZ 2110
• Profile (width, height) and diameter of VAZ tires

Review of the best summer and winter tires

It is better to acquire separate sets of summer and winter tires in advance. Pirelli Cinturato P1 Verde tires are ideal for the warm season. Their cost is relatively high (from 3,500 rubles per 1 tire). However, they perform excellently on wet asphalt and are highly resistant to wear.

• Continental Conti Premium Contact 5 is well balanced. There are a large number of special drainage channels - they make it easy to drain water from the contact patch. This kit will cost slightly less than the one discussed above.
• Goodyear EfficientGrip Performance provides good grip and low fuel consumption. However, the tread thins out quite quickly - especially during intense driving. The rubber is soft and handles well. Despite its softness, it is difficult to damage it redder.
• Dunlop Sport BluResponse is relatively cheap compared to all the options discussed above. However, it has its weaknesses. For example, on wet asphalt the wheels slip a lot and handling deteriorates.

Parameters of stamped wheels VAZ R13

All VAZ cars are equipped with rims with a diameter from 12″ (305 mm) to 17″ (432 mm).
Wheel sizes for VAZ 2101 (Zhiguli) 1.2:

Wheel sizes for VAZ 2106 (Zhiguli) 1.3:

Wheel sizes for VAZ 2114 2001 1.5i:

Important: for most wheel sets of VAZ cars, wheels with a drilling format of 4x98 (mm) are used.

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be absolutely accurate.

Source

Tires, wheels for Lada (VAZ) 2110 (LADA (VAZ) 2110)

LADA 2110 is a series of cars that were produced from 1995 to 2009 at the VAZ automobile plant. The most popular car of the family is the VAZ 2110. Experimental models were produced in 1995, and mass production started in 1996.

What sizes of tires and wheels for the Lada (VAZ) 2110 does KOLOBOX recommend?

In order to determine which tires and rims are suitable for this vehicle, it is necessary to determine the optimal sizes with which the car is produced, as well as alternative options.

The table below shows tire parameters (on the left) and wheel characteristics (on the right). At KOLOBOX, every Lada-2110 driver will be able to receive detailed advice and select summer and winter tires, cast or stamped wheels.

2110 is equipped with wheels with diameters of 13 and 14 inches. The width of tires varies from 175 to 185 mm, and the profile from 70 to 55%. Thus, the main sizes are: 175/70 R13, 175/65 R14, 185/60 R14. And alternatives: 185/65 R13, 195/50 R15 and 185/55 R15.

We select winter tires for the LADA (VAZ) 2110 car

Summer tires differ from winter tires in their special structure, which begins to harden when the temperature drops to a certain level. This leads to a significant deterioration in adhesion to the road surface, which in turn reduces safety and comfort while driving. Therefore, it is necessary to promptly apply for replacement sets of tires.

Several models of tires for winter:

We select summer tires for the Lada (VAZ) 2110 car

Many owners of Lada 2110 cars turn their attention to low-profile tires. Before you decide to install them on your car, it’s worth knowing their pros and cons. The positive aspects of low profile tires include:

• Increased maneuverability while driving.
• Increased controllability: the wheels react quickly and “sharply” to any steering movements.

Marking features

All wheel rims are marked with a special marking that reflects all the parameters. Marking must be on any products, regardless of the material from which they are made. Let us show with one example what this or that number and letter in the marking means. For example, let’s take into account the marking 7.5Jx 15 H2 5×100 ET40 d54.1:

• the first digit 7.5 shows the width of the rim in inches from one inner edge to the other;
• the Latin letter J indicates the type of rim edge; the letters B, D, K, P, JJ, JK are also often found;
• the next “x” sign indicates that the disk is non-separable, otherwise a “-” sign is placed;
• the number 15 indicates the diameter of the disc, expressed in inches;
• the H2 symbol gives an idea of ​​the shape of the protrusions for fixing tubeless rubber;
• the expression 5x100 indicates that this disk has 5 holes for mounting bolts, and the diameter of the circle on which their centers are located is 100 mm (PCD parameter);
• parameter ET40 is the size of the protrusion in millimeters;
• parameter d54.1 is the diameter of the central hole in millimeters.

If the parameters of the presented markings are compared with the table that we provided for the VAZ 2110, then we can conclude that such a disk will not fit on the VAZ. That is, understanding the meaning of the wheel markings makes it possible to buy and correctly install beautiful alloy wheels on your car.

We recommend reading:

• VAZ 2110 windshield: replacement features
• The cigarette lighter on the VAZ 2110 is broken and does not work
• Instructions for replacing the fuel pump mesh on a VAZ 2110
• We replace the pump on a VAZ 2110
• Initial information about the electrical circuit of the VAZ 2110
• The design of the front suspension on the VAZ 2110

The best all-season tires for the VAZ-2110

All-season tires are in particular demand among Russian drivers. It allows you to use one set for a long time, without wasting time on off-season “change of shoes.”

The performance properties of the rubber compound enable these tires to function normally in the summer and winter seasons.

Kama-365 (NK-241)

Description of the tire. The model is characterized by large tread blocks located diagonally, as well as deep recesses designed to drain snow and water.

Powerful shoulder blocks reliably hold the car on wet or muddy roads. The wide slots of the grooves separating them contribute to good maneuverability on dirt roads or snowy sections of the road.

The robust design of the model, made of high-quality steel, as well as the seamless production technology of a synthetic breaker, makes the tire resistant to deformation.

Two central powerful stiffening ribs allow the driver to maintain directional stability in various driving modes.

The rounded transition from the tread to the side allows the rubber to instantly respond to steering inputs and improves control.

1. Low noise level.
2. Reasonable price.
3. Predictable control.
4. Elastic tire at slightly sub-zero temperatures.
5. Long service life.

The best summer tires for the VAZ-2110

The summer tire segment for the VAZ-2110 is represented by budget models. However, not only the reasonable price is the advantage of these tires.

They have good performance characteristics and high strength characteristics.

Viatti Strada Asimmetrico V-130

Description of the tire. This model of summer tires allows the driver to confidently navigate flooded roads without fear of aquaplaning.

An effective drainage network, consisting of powerful longitudinal channels and capacious inclined grooves, quickly copes with the removal of water from the contact area between the wheel and the road.

The computer-simulated arrangement of the asymmetrical tread elements makes it possible to reduce noise when driving.

High-density central blocks maintain directional stability and make driving predictable.

The original shape of the slots in the edge zones allows you to hold the car when changing lanes or performing maneuvers.

1. Moderate noise.
2. Clear management.
3. Minimal wear.
4. Confident grip on wet and dry roads.
5. Reliable, durable rubber.

Normal, working tires of average quality at an affordable price - the opinion of its owners about the model.

Cordiant Comfort 2

Description of the tire. The main advantages of the model are a high level of safety, good strength characteristics, and high-quality grip on any type of road surface.

The model's compound consists of two layers. The upper one, elastic and soft, reliably contacts the surface of the road, neutralizes shock when driving over holes and bumps.

The lower one is characterized by an increased density of the rubber mixture, which allows the material not to lose its shape during intensive use and in hot weather.

The tire breaker consists of steel and synthetic cord. This combination helps the rubber be puncture resistant and extends its service life.

The presence of three wide drainage channels makes it safe to travel through water sections of the road. Their volume is quite enough to drain the contact area between the tire and the highway.

1. High wear resistance.
2. Acoustic comfort.
3. Normal control.
4. Good price.
5. Operational balancing.
6. Low rolling resistance.

What criteria are used to select disks?

A large number of wheel options are produced for the VAZ 2115 and VAZ 2114 models. When choosing a suitable option, you need to pay attention not only to their appearance (which, of course, is of great importance for every car enthusiast). Compliance with a number of parameters largely determines the durability of the disks, even when operating under significant loads.

Important parameters

Each product is usually marked. Not everything in it is clear to a less experienced car enthusiast.

What is usually applied to the disc by the manufacturer:

Wheel rim marking option: 5Jx13 ET29 PCD4x98 DIA58.6.

Installation of wheels that are not included in the line of products recommended by the car manufacturer can often be possible only after tuning. At the same time, changes are being made to the design of the braking system.

How tires and wheels for the VAZ 2115 are designated: the dimensions can be seen in the photo:

Material

Today, car owners have many more options for completing their vehicles than even twenty years ago. When choosing a suitable model, it is recommended to pay attention not only to the appearance and cost of the products, but also to take into account the driver’s driving style. There are three types of discs on the market.

Steel wheels

The vast majority of AvtoVAZ vehicles are equipped with just such wheels. Their main drawback is their not very presentable appearance. It is this circumstance that does not allow stamped products to be popular with many car owners. Although steel wheels have enough advantages:

In principle, in terms of price/quality ratio, stamped wheels still look quite attractive today. In addition, to increase the visual appeal of the wheels, they can be covered with decorative caps (however, they are periodically lost when driving, for example, through snowdrifts). In this case, the rust that appears on the iron will not be visible. Steel wheels for VAZ 2114 or VAZ 2115 are quite popular.

Alloy wheels

The biggest advantages of these products, made of aluminum alloy with the addition of magnesium, are their lightness and aesthetics. Moreover, there are so many disc options available that it is possible to satisfy the needs of any equipment owner. Alloy wheels do not rust (the only decorative coating can be damaged by the reagents used to treat roads in winter), they correctly distribute the load on the suspension. In addition, there is no additional need to purchase caps. Of course, the cost of aluminum models is significantly higher than the price of stamped ones. But, despite this, these products are increasingly being chosen by car enthusiasts to equip their vehicles. However, it must be taken into account that defects that appear on such discs (during operation in winter or, for example, after driving at high speed on a not very smooth road surface) cannot be eliminated. Therefore, in some cases it is preferable to use steel models.

Standard fasteners are often not suitable for installing light alloy wheels. Therefore, you have to purchase an additional kit.

A certain difficulty can also be the discrepancy between the size of the central hole of the disk and the hub. For example, the VAZ 2114 hub has a diameter of 58.6 mm, and the disc hole size can be 67.1 mm. To install the wheel, you will have to purchase a special spacer 67.1/58.6 mm.

Important! When choosing wheels for VAZ 2115 and 2114: the dimensions of the hole and hub must be taken into account.

Forged wheels

These products belong to the most expensive product segment. Models made from light alloys under high pressure are characterized by excellent strength characteristics, long service life and attractive appearance (but, of course, forged products do not have the variety that the line of cast products can boast of). If the car enthusiast is a fan of sports driving, this option is the most preferable.

The best winter non-studded tires for the VAZ-2110

Warm winters have become a common occurrence in Russia. In the absence of roads with ice in such conditions, friction tires come to the rescue of motorists.

They reliably contact the winter road with their dense, pronounced checkers.

Belshina Artmotion Snow

Description of the tire. The symmetrical model is distinguished by a directional arrangement of contact spots on the tread, diverging from the middle stiffener rib.

The classic V-shaped layout ensures confident vehicle control on a winter highway and helps maintain speed limits.

Along the entire profile, zigzag lamellas are placed on the surface of the contact blocks. Their numerous edges cling to the road surface, providing reliable grip on the road.

Solid lugs of the edge zones ensure good maneuverability of the vehicle. Wide grooves separating them prevent movement and reduce wear.

Longitudinal channels and numerous recesses located across the entire width of the profile remove snow and water from under the wheel.

1. Soft, comfortable for driving on uneven roads, rubber material.
2. Good maneuverability.
3. Reliable movement on slush, wet asphalt, and snow.
4. High-quality braking.
5. Affordable price.
6. Durable material.

Viatti Brina V-521

Description of the tire. A complex tread pattern that helps to confidently “hold” the car on any type of winter road, an effective drainage system – these are the characteristic features of the model of the Russian company.

The quality of grip on the road is ensured by a mixture specially developed for the model, as well as numerous sipes.

The elastic material of the contact blocks fits tightly to the track surface, and the edges of the slots tenaciously hold the road surface.

The contact spots located on the outer zones are equipped with an additional layer, which enhances their strength and allows the vehicle to maintain stability on turns and when changing lanes.

Multidirectional arrangement of tread grooves makes it possible to reduce noise levels and improve acoustic comfort.

1. High-quality compound - does not harden at low temperatures.
2. Good directional stability.
3. Passable tires that do not get buried in the snow.
4. No slipping at the start.
5. Acceptable price.
6. Excellent handling.

The owners of these Velcro tires have no comments about the manufacturing company. They recommend the product for purchase.

The best winter studded tires for the VAZ-2110

Studded tires will save the driver and his car from troubles when traveling on icy roads.

The best inexpensive models of such tires from domestic manufacturers are presented in our review.

Viatti Brina Nordico V-522

Description of the tire. The model received an asymmetrical pattern, in which the central longitudinal rib is shifted closer to the inside. This arrangement improves the vehicle's directional stability and promotes stable handling.

A large number of diagonal contact blocks located in the middle blocks makes for reliable braking on roads with any surface.

The tread in this model is studded along the shoulder areas. It allows you to keep the car on a slippery highway and maintain stability when changing lanes.

The entire width of the profile is covered with lamellas of different shapes and directions. Their upper parts are equipped with hard edges, with the help of which the tire tenaciously holds the car on a slippery surface.

1. Excellent cross-country ability on snow.
2. High-quality braking.
3. Reliable compound.
4. Adequate cost.
5. Confident grip on ice, slush, and wet asphalt.
6. Easy balancing.

Owners of these tires believe that their price corresponds to the quality of the model. In terms of performance properties, it is not much inferior to studded winter tires from well-known brands.

Kama-Euro-519

Description of the tire. A characteristic feature of the model is the presence of a large number of studs installed on a symmetrical directional tread.

Their hard tips reliably bite into the icy crust of roads, holding the car in various modes of movement.

Nizhnekamsk manufacturers use high quality materials when producing: natural rubber, polymer additives. Such a mixture remains elastic in severe frosts and does not lose performance characteristics.

Wide recesses between the shoulder contact blocks extend far to the sides. This arrangement allows the driver to confidently get out of drifts on the road and improves cross-country ability.

The directional V-shaped arrangement of the contact patches of the central zone promotes precise control and supports movement at high speed.

1. Acceptable price.
2. Excellent driving performance at low outside temperatures.
3. Confident behavior in a rut.
4. Decent braking on snow, wet or dry asphalt, and ice crust.
5. Reliable installation of spikes, they do not fall out.
6. Wear resistance.

This model has good driving properties and is inexpensive, its owners note. They recommend it for purchase.

Why is it important to choose the right size?

The most popular wheel sizes for installation are R14 and R15. This is due to the fact that they can be easily selected in a store and installed on a car. The main thing is to comply with the required dimensions and bolt pattern parameters specified by the manufacturer. If products with dimensions different from the factory ones are selected, then special adapter rings should be used. They often come with the product.

Adapter rings for wheels for VAZ 2112. Please note! The main problem that prevents the installation of large products is the size of the wheel arches.

If you exceed the dimensions and do not modify the wheel arches, then the rubber will touch the body structure itself during maneuvers, which leads to increased wear of all suspension components and parts and a decrease in safety.

To avoid these difficulties, it is necessary to install products only with guaranteed suitable parameters and dimensions. For the VAZ 2112, these are the diameters R14 and R15, which have factory parameters and meet all safety requirements and other characteristics.

Wheels of this size will give the car the best level of driving comfort.

As for increasing the size of the rim, their operation has its positive and negative sides, which every car enthusiast needs to know. However, the decision to purchase and replace disks should be made only by the owner of the machine.

Pros:

• Good car behavior in the lane;
• Improving the exterior of the car;
• The best road qualities, including dynamics and handling;
• Maximum absorption of potholes and road defects;
• When using rubber with a high profile, the wear resistance of chassis parts increases;
• Reducing the braking distance.

Minuses:

• Reduced level of comfort in motion. This is due to the high sensitivity of the chassis to road defects;
• Difficulty in parking and driving on poorly paved roads;
• Increased requirements for pressure control in low-profile tires;
• Increased gasoline consumption, which is associated with the increased difficulty of driving the wheels;
• High price.