Removing and installing the front seat of a VAZ 2110 Lada

❶ How to recline the rear seats

You will need
instructions

Car interiors, as a rule, are equipped by manufacturers with undivided rear seats, with the exception of special-purpose vehicles (all-terrain vehicles, vans, etc.). The design of the backrests has a recessed armrest, which, when lowered, provides access to a plastic hatch. After removing it, you can transport long objects (skis, fishing rods), which are placed through the luggage compartment.

In cases where the trunk volume is not enough to accommodate luggage, the seat back can be slightly tilted towards the passenger compartment by pulling up the lever that regulates the position of this accessory with your hand.

Having achieved the desired tilt, the lever is released and the position of the backrest is fixed.

To transport large items, it is possible to fold the rear seat completely, thereby significantly increasing the volume of the luggage compartment of the car: - pull the lever that locks the position of the backrest towards you and fold it onto the sofa;

- then pull the seat straps towards the trunk and fold the seat completely, moving it forward and up until it locks automatically.

To bring the interior into proper condition, there is a lever on the left side of the folded rear seat, by pulling which it lowers back, after which the backrest rises, and its position is fixed with latches.

Video on the topic

note

Remember that the main purpose of a passenger car is to transport people. Delivery of goods is carried out by other means of transport. Therefore, never abuse the capabilities of your machine.

Helpful advice

Sometimes it is cheaper to pay for transportation services than to repair your car, which was the result of overload.

www.kakprosto.ru

What can be improved

Let's consider what interior elements can be replaced, what advantages they have and what should be given more attention.

Door trim

Replacing the door trim will only improve the appearance of the interior, and when carrying out noise insulation work, it will increase its level. It is recommended to start tuning the interior of the VAZ 2110 with this. You can install a higher-power speaker system with your own hands.

Interior trim

Depending on the size of the budget, there are several options: using covers, changing the standard interior by re-stitching, or completely replacing the interior from a different brand of car.

Dashboard

It influences the overall appearance of the interior, modifies it, and provides improved information content. It is possible to use devices from other car brands, as well as to carry out work to improve the standard panel.

Pedals

Special pads allow you to avoid completely replacing the pedals. They look good and are more comfortable to press.

Acoustics

Replacing new acoustics and audio systems will have a slight effect on the appearance of the interior, but can significantly improve the sound quality.

Steering wheel

The steering wheel installed from the factory is not beautiful or original. Often, owners replace it with a steering wheel from the latest VAZ models or other cars.

Accessories

There are a large number of accessories with which you can change the appearance of the interior, both in large quantities and in detail, while increasing comfort and ergonomics.

You should not invest a significant amount in remodeling if you do not plan to use the car for a long time. When planning to use a car for several years, it is quite advisable to carry out work to improve comfort and ergonomics.

Let's touch on in more detail certain aspects of doing it yourself tuning the interior of a VAZ-2110.

General selection conditions

1. Condition: new or used. New seats are more expensive, but they will last longer. Every year, thanks to modern technology, seats become more comfortable and have new functions. Used seats can be purchased at car dismantling yards.
2. Manufacturing company. The 2114 fits both seats from other VAZ models and domestic brands, as well as seats from foreign cars.
3. Additional options. Headrests, armrests, and lift make the seat more comfortable and safer.
4. Completeness. Basically, the availability of fasteners and accessories needs to be clarified if used seats are purchased.

Seat reupholstery

To replace the seat upholstery yourself, you will need the following tools:

In addition to the tool, you will need space. You can start replacing the seat upholstery of the “tenth family” at home. This work is clean, there will be no debris left after reupholstering. The seats will have to be removed. But you don’t need to remove the entire interior at once. Start replacing the upholstery on the front passenger seat. Next - with the driver's license. Finish with the back sofa.

In order to remove the front seats, you will have to push them forward as much as possible and remove the torsion bars. Then, move it as far back as possible and unscrew the fastenings of the seats to the floor of the car. Next, raise the seats and unscrew the fastening of the guides. That's it, the seats are removed. You can start re-upholstering.

It is worth carefully inspecting the fastening of the old seat upholstery. Using a screwdriver and pliers, bend the hooks securing the seat upholstery of a VAZ 2110, 2111 or 2112. You need to pull a new upholstery in its place. In this case, you can do without separating the backrest from the “seat”. Don't forget the headrests. It's easy to pull them over. That's it, the front row of seats is covered with new covers. Can be installed back into the car.

The rear sofa has a different upholstery fastening. Along the perimeter of the case there is a edging into which a special cord is inserted. The new cover is put on according to the principle of the old one. The seat is put in place.

Another option for replacing the seat upholstery of the Lada 110 is to install an anatomical kit on the car seats. To do this, you will have to disassemble the seats down to the frame. Remove the standard foam molding. Install the anatomical kit in place of the old one. Installing new covers is accompanied by useful steps. This could be lubricating the skids, cleaning the interior and internal parts of the car seats, replacing broken parts, and the like.

Heated seats

Heated seats are relevant for most Russian regions. Sitting on a frozen seat in winter is not always comfortable and safe for health. Many people neglect this option, believing that heating consumes a lot of energy.

In fact, the heating option uses the same amount of energy as the parking lights. The seat warms up quickly and then remains comfortable down to -30 °C outside the car. If you have a choice of options and you have not yet decided which seats can be installed on the VAZ 2114, it is better to install heated seats.

Set for heated seats VAZ 2114

In the 2114 model, the heating option is controlled by the on-board computer. If you independently connect the heating to the network, a short circuit may occur.

Do-it-yourself preparation for tuning a VAZ-2110

To start tuning we need paper. You will need to write down all the planned changes to the interior of the cabin, and also note the final result next to each item of the tuned element.

According to the advice of experts, first those defects that make driving the car less comfortable are removed.

The work is carried out and the budget allocated for it is spent in accordance with the drawn up action plan. If you don’t fit into the planned budget, you need to either change the originally drawn up plan, excluding less significant items from it, or increase the expenditure portion.

First, you need to find out the cost of all materials in order to fully get a picture of the total costs of modifying the interior of the VAZ 2110. Tuning the interior can be done with the involvement of a specialist, but this will only increase costs.

Types of seats

There are three types of seats:

• racing;
• sports;
• seats of increased comfort (anatomical).

Racing seats are designed to withstand high loads. The single frame is made of high quality materials. Typically, such models are much more expensive than sports and anatomical options.

Racing seats

The sports seats consist of a single rigid frame. They are adjustable, provide hip and shoulder support, and are comfortable for long rides. But due to their rigidity, such seats are not suitable for every driver.

Sports chair

Anatomical seats provide lateral support when turning, correct back position and reduce the risk of musculoskeletal diseases.

In most cases, there is no need to install racing seats on your car. And seats with increased comfort and sports options can be selected quite inexpensively if you know exactly which model you need.

High comfort chairs

How to remove the rear seats on a VAZ 2110? Valuable information about tuning VAZ seats

A detailed guide on how to remove the rear seats on a VAZ 2110 allows you to complete all repair work without outside help. For example, you decide to repair the seats, install new ones instead of old ones, or reupholster them with leather. But how to remove this element without damaging the mount and other parts? The “Ten” is the progenitor of the “Priora”, but differs from it in certain components. It was once considered a powerful, modern car, equipped with a carburetor with automatic choke. How to remove the rear seats on a VAZ 2110 when you need to go pick up goods, transport bulky cargo, and so on? You can do all the work yourself

We will tell you step by step what nuances you should pay attention to, what tool to arm yourself with and what actions to perform. Removing seats in 9 minutes The driver will need exactly 9 minutes to remove the “tens” seats

Don't believe me? Try it! Disassembly begins with slightly loosening the upholstery. Just press the buttons located near the trunk. Then move the lock handle on the right to the side and lift the seat. The procedure on the left side will be similar. The seat cushion can be easily moved forward and removed. You have already done half the work, and further actions are performed in the following sequence:

• Removing head restraints. Press the fastening buttons and pull the headrest up. We perform similar actions with the other section. Make sure that the buttons are not lost anywhere. They will also be useful to you during reassembly.
• Remove the upholstery completely so that there is nothing obstructing the removal of the seats. When you see a loop, pull it. This will allow you to pull out the locking lock located at the back of the backrest.
• Slightly lift the right side of the backrest and remove the fastening loops from each hook. They are right on the floor. By analogy with the right part, remove the left one.
• All that’s left is to remove the armrests, and if necessary, the seat belts. Armed with a 10 mm socket wrench, unscrew the 2 nuts. This will allow you to remove the armrest.

So you have completed the task. And it took you no more than 9 minutes. Installing the seats is done in reverse order. We hope you remember everything? What to do with the seats of VAZ 2111 and 2112? VAZ 2111, 2112 cars are far from random “guests” of the article. All three cars, including the “ten” described above, belong to the same class of cars. But the problem is that their seats are removed in completely different ways. Therefore, the removal instructions for the VAZ 2110 are not suitable for car enthusiasts who drive 2111, 2112 models. Let's figure out what the dismantling process will look like on “younger” models.

• The back and seat are divided into two halves. Therefore, you can also remove them separately. For additional safety of the driver and passengers, the seats are equipped with head restraints. And you will agree that driving with them is much more convenient.
• Let's start disassembling. Pull the loop to raise the seat on the left. Tip it forward. Then unscrew the nuts with a 10 mm spanner. Pull the seat out of the passenger compartment. Repeat the operation with another element.
• Take a socket wrench - now 13 mm. Unscrew the nuts that are located under the seat mounting hinges on the left. There are two nuts - you can do it in a couple of minutes. Lift the fastener upward to fold the backrest forward. All that remains is to unscrew the last nut and bolt. They are located above the hinges. By analogy with the left side, the right side is also removed.
• The backrest latches may break. It's okay - you can easily install new ones. The plastic bushing of the lock may also fail. Plastic is plastic, no comment needed. We just buy a new bushing and install it in place of the old one. You won't have any more problems with VAZ seats.

Let's sum it up

The procedure for installing more comfortable seats in the VAZ 2110 is quite acceptable. This is a good opportunity for every car owner to make their vehicle more comfortable, beautiful and enjoyable to use. But for this you need to find smart products and a good craftsman. Seats on disassembly do not always inspire confidence. Many of them are smoked, some have broken plastic adjustment knobs, frayed fabrics or altered shapes. Therefore, you should buy seats carefully, checking all the factors. It is better to agree with the seller that you will return the seat if it turns out to be of poor quality.

The process of installing a new seat on a VAZ 2110 is quite complicated. But the most difficult process will be the digestion of the fastener. If you entrust this work to a specialist, you will not experience any significant problems with further actions. The choice of chair is important. Don't go for the width of the back and leather trim. It is better to buy simple and practical products from a reputable manufacturer. Such products will serve you for a long time and will not cause trouble in the future. What kind of seats would you like to put in your car?

Step-by-step instructions for dismantling

Before starting work, we prepare the necessary tools. To remove the seats we will need:

• flat and Phillips screwdrivers;
• key to 10;
• pliers;
• repair kit (depending on the situation).

It is better to work with gloves so as not to accidentally injure your hand on sharp metal corners.

The procedure is as follows:

1. Unfasten the rear seat upholstery buttons on the trunk side.
2. Pull back the loop and remove the latch near the headrest.

To get to the latch, you need to pull the loop near the headrest

We pull out the hooks on the back from the metal brackets that are on the body.

Remove the hooks that hold the seats to the body

The armrest mounting frame is fixed with three screws; we unscrew them for further dismantling. To remove the armrest itself, use a 10mm wrench and unscrew the nuts. Use a 10mm wrench to remove the armrest fastening nut.

The mounting pad is secured with two latches; we press them out with a flat-head screwdriver.

To remove the mounting pad, press the two latches

Unscrew the fastening bolt and pull out the seat cushion lock.

After unscrewing the mounting bolt, the lock can be easily removed

Dismantling ends by unscrewing the last two nuts with a 10mm wrench, after which the base of the lock is removed.

Installing seat upholstery on a VAZ 2110

I decided to update the interior of the car. For a long time I was choosing between covers or replacing the completely factory seat upholstery. Since I don’t really like the covers, because they can’t be tightened and they look bloated, I decided to go the more difficult route and replace the covers themselves.

This is not the first time I order, a huge range of goods and reasonable prices. In addition, many, like me, will like the choice of transport companies, and not just Russian Post.

To work you will need:

• keys and sockets 8, 10 and 13 for unscrewing the seat slides from the floor of the car;
• wire cutters, flat screwdriver and about 100 units. clamps measuring 2 mm by 200;
• You may need a hairdryer or steamer. To remove wrinkles and folds.

Personally, even after a hairdryer, I still have wrinkles, maybe I need to heat it up longer

Installation and reupholstery of seats

Installation and dismantling of seats 2 hours. If you removed the front seats, then it will take about 12 hours to reupholster.

I installed it on factory foam molding, because I thought it seemed like a whole thing, which I regretted a little. My car is 2006. And the backs all turned out to be made of straw. And the foam rubber for lateral support was torn in places. Because of this, the operating time has increased.

• After removing the seats, separate the backrest from the seat.
• Next, bend the hooks at the base of the back and remove the old material.
• You insert the woven material into the slot for tightening and pull it onto the hooks.
• Then you tighten the upholstery material itself.
• When working with seats, you need to remove 4 long hooks from the frame itself.
• Then use pliers to straighten or bite off the rings. You definitely won't need them.
• Take out the knitting needles and insert them into new upholstery. Then you insert the clamps and tighten the knitting needle that is in your upholstery with the knitting needle that is in the foam molding. And attach the clamps.

When stretching the upholstery, try to ensure that the stitching and seams go where they should. If you then pull or twist the material when it is already stretched, folds and wrinkles will appear. If something goes wrong, it's better to take a step back.

Replacing the upholstery on the back sofa is very quick. You bite off the rings and remove the factory upholstery of the sofa. Pull the new one on and secure it at the corners with clamps. You make holes in the upholstery and insert clamps. Next, pull and stretch the material to your taste.

The most difficult thing for me was reupholstering the armrest, it fit so tightly. Of course it would be nice if the zipper were 1 cm longer.

And I advise everyone to spare a little money and order additional new foam casting. You will save time on repairing the old one, and most importantly, the final result will be even better.

Sources

Seat covers

The upholstery of standard VAZ seats, as a rule, is not reliable and durable. Covers will help preserve it. You can choose covers from any material, from genuine leather to micro-suede, and in a color scheme that suits the interior and the car as a whole. When choosing covers, it is better to pay attention to options with padding polyester inserts for back support.

Seat covers

The simplest options - almost without modifications

There are legends on the Internet that many seat models fit the VAZ 2110 without any modifications at all. But in fact, without any special modifications, you can only install Recaro from old Opel. All other options will have to be redone and digested. There are also arguments that this is not a safe process at all and could lead to disaster. Let's draw a definite line under all that has been said and give specific recommendations so that nothing bad happens:

• you will still have to weld the slides on the seats, but you don’t have to do it yourself, it’s better to order this work from a good welder, maybe not even a car mechanic;
• after welding, no further alterations are needed if you have chosen the seats correctly, that is, you have not bought too wide or high seat options because of beauty and cheapness;
• it is more difficult to change the rear sofa due to its rather specific size, but there are model options on the market with identical widths; you just need to look for offers at a disassembly site;
• you can keep all the functions of the seats from the foreign car - height adjustment, lumbar support adjustment, electrical adjustments (but they will have to be connected separately from the wiring);
• The conversion is not only possible, it is really worth it, since AvtoVAZ does not install the best seats, with the only exceptions being Vesta and X-RAY.

These are the conclusions that can be drawn from installing foreign-made seats on a VAZ 2110 car. This is a good idea that should result in positive emotions during the trip. In almost any foreign car, the seats are much more comfortable than in domestic cars. It makes no sense to install seats from Kalina or Priora in the Ten, you won’t feel a significant difference, and you’ll still have to struggle with modifications. So it’s better to find a good foreign car.

We invite you to watch a video of remaking seats for a VAZ 2110:

Seats from which foreign cars can be viewed for the Tens?

What seats are suitable for the VAZ 2110? You can install almost all seats from cars of a similar size. This could be a B or C class car, which is famous for its comfort. Thanks to the abundance of disassemblies, buying used chairs will not be a problem. All that remains is to choose the chair model directly. For such a selection, it is worth focusing on already successfully completed projects, which car owners are happy to brag about in in-flight magazines. Here are just some popular examples:

1. BMW E60. The seats in these models of Bavarian cars were mostly leather, and also equipped with an electric drive and other additions that the car owner would obviously like.
2. Hyundai i40 or Hyundai i30. The seats are very comfortable and well thought out, and the ones from the i30 are preferable, as they leave more space in the cabin. The appearance is good and the side supports also work very well.
3. Skoda Octavia A5. The seats are very comfortable and compact, there are the necessary adjustments, and well-defined lumbar support. The quality of the upholstery in this model is also pleasing, so you will definitely be satisfied with these chairs.
4. Ford Focus. The alterations will be quite complex, but nevertheless, you will get excellent results. Especially if you can find seats from more expensive trim levels of this car, they are very comfortable and beautiful.
5. Recaro. Many sports style lovers would like to see Recaro seats in their car. The easiest way is to find Opel proposals, but there are also solutions from other models; altering them will not be difficult even with your own hands.

This list goes on with most compact models from Volkswagen, Mercedes and other brands. There are a lot of interesting ideas on the market. But before buying chairs, you should find out if anyone has performed such an operation on their Ten before you. This can be found on the Internet, since most owners will definitely boast about such a change. However, you can try something new by posting your experience on the Internet to help others.

Video instructions: how to fold out the seats on a Chevrolet Niva

To fold the back of the rear seat, you need to find the lock that locks it in a stationary state and pull the loop to release the latch.

But before this, space is first freed up to accommodate the backrest: Next, the backrest folds completely freely and provides space for transporting cargo in a Niva Chevrolet SUV.

To unfold the product, you simply need to recline the backrest and the lock itself will lock it in the desired position, and return the pillow in the same way to its original position.

It is imperative to ensure the quality of the lock’s fixation after the structure has been unfolded. While supporting the folded seat, remove the hook from the handle.

Once you have slowly lowered the seat, press down firmly to secure it in place. Warning Once you have disconnected the hook, turn the seats over and the legs will automatically unfold.

Pull the adjustment lever located on the side of the seat and raise the backrest. Warning Make sure that the seat legs are folded out. If they do not decompose automatically, decompose them by hand.

After you have folded the seat or returned it to its original position, lightly move the seatback back and forth to check that the seat is securely secured.

Remove the headrests from the front seats and insert them into the storage holes located at the bottom of the rear seat. Recline the rear seatback completely.

With the front seatbacks folded down, slide the front seats all the way forward.

“>

Principles of installing covers

Putting on the second upholstery is quite easy, and you can handle this task yourself. As a rule, covers are sold as a set for all car seats or only for the two front seats. The kit includes upholstery for seats, backrests and headrests. Before you start working, you need to go through all the elements and determine where each of them is intended.

When reupholstering the interior with covers yourself, it is worth keeping in mind that the left and right seats can differ significantly from each other, therefore the covers on them must be worn accordingly. Installation begins with the front seats. There is no need to dismantle them, only the headrest, if there is one. First, the back is stretched and the folds are smoothed out.

Then the elastic bands located along the central seam are secured with hooks. They must be threaded through the gap between the back and the seat. After this, the lower part of the car cover is put on. The head restraints are installed last. To put the covers on the rear row of seats, they must be dismantled and pulled out of the car.

The cover with a zipper is intended for the backrest, without it - for the chair. If the factory upholstery of VAZ seats has already become unusable, then before putting on the covers, it should be completely replaced. The procedure for completely reupholstering the interior involves dismantling the seats, and it is better to entrust it to professionals with special skills and tools.

What is needed to install seats in Lada?

At car service stations, you could ask this question and receive a skeptical look from the mechanic in response. This is a rare task for workshops; not all bodywork specialists can perform this task. However, you can go in three ways to solve the problems that arise:

1. Self-remodeling. To do this, you will need to find good seats for a specific foreign car on the classifieds website. Next, the fasteners are cut off from the original seats and welded onto the purchased seats. After that, all that remains is to install the update in the car interior.
2. Search service station. Today there are many stations that are ready to do this job for you. In big cities there are even entire companies that install good seats in domestic cars. So it won't be too hard to find.
3. Purchasing ready-made refurbished chairs. It is quite possible that on the same advertisement site you can find seats for the VAZ 2110 that are ready for installation. The specialists themselves will digest the mount after receiving your order and send you the finished product.

Which option to prefer, choose for yourself. But before installing such a seat, it is worth checking the quality of welding

If the base is welded poorly, it is worth correcting this defect. For example, a crooked mount will force you to constantly sit with a small rotation of the body

And too flimsy installation will cause poor security. For example, in the event of an accident, such a seat can break off its fastenings and cause irreparable damage to the driver and front passenger.

Rear sofas - what to replace them with in the VAZ 2110?

If everything is approximately clear with the front seat options, then the rear sofas require a special approach. We are talking about an unconventional size and rather strange types of fastening of a sofa from AvtoVAZ. If you are far from automotive, it is better not to modify the rear seats yourself. For this you will need the help of specialists. It is important to find a car of the same size, as wider cushions and backrests will have to be redesigned. The installation process is quite complicated:

• you need to choose good rear sofas from models such as Volkswagen Polo, Hyundai Solaris, KIA Rio, Renault Logan, and you can also pay attention to Toyota Corolla;
• Next comes the dismantling of the seats of your car, which is not particularly difficult - just unscrew a few fasteners to get all the structural parts without any difficulties;
• Next, you should try on new seats, it is quite possible that you will have to order their re-upholstery at a studio, since it is very difficult, and sometimes impossible, to guess the size perfectly;
• the next step is the installation of fasteners, it is necessary to remove the fastening parts from the VAZ seats and rearrange them on the purchased pillows and backrests for high-quality fastening;
• after that, all that remains is to install the finished seats in place and enjoy the updated interior of your car, also don’t forget to take a photo and share it on the forums and in the logbook.

Of course, this sounds much simpler than it is done. The process may take more than one day, especially if the seats need to be altered, shortened or lengthened. When choosing seats for the rear of a car, it is best to buy a whole interior set. This will help significantly reduce the cost of further alterations. After all, if you install chairs of different colors, you will have to sew covers or change the upholstery and spend extra money.

Repair of driver's seat VAZ 2110

If the seats of your VAZ-2110 have one of the above-mentioned malfunctions, first of all, remove them and move them to a warm and well-lit place, where all subsequent work will be performed, for which you will need a hammer, screwdriver, welding machine, and also an angle grinder.
First, the two components of the chair need to be disconnected from one another. Let's start with the bottom part. After a preliminary inspection and identification of the breakdown, we eliminate it using the specified tools and paint the structure. Next, we assemble it in the opposite order of disassembly. Now we need to fix the back too. To do this, we remove the cover by moving away the teeth located at the back, using a flat-tip screwdriver for this process. I always want to do all the work when the weather is good outside. You first need to buy wall-mounted weather stations so that you can always know what the outside pressure and temperature are.

After the canvas and all kinds of decorative elements have been removed, you can begin to inspect the structure in order to determine the nature of the malfunction. Having found it, we begin to eliminate it.

The process of performing repair work is completely similar to that described above. Often, backrest damage is more severe and can usually be repaired by using a hammer and a welder.

There is very little left. In order for the repaired seat of your VAZ-2110 to work correctly, ensure its synchronous operation. To do this, you need to clamp it and grab it with a clamp, then fasten it with a welding unit, grind it and clean it. All that remains to be done is to paint the entire structure and install it back into the car.

What would be suitable for seats with minimal modifications?

If it is possible to use a welding machine or an angle grinder, then you can install almost any option in your car. In this case, it is better to start from the concept of “price-quality”.

For example, there is the selection and installation of seats from Lancer 9. The main difficulties appear in fitting:

• Correctly measure the angle of the seats;
• The location of the structure relative to the floor, ceiling;
• Get into the factory mounts;
• Location between tunnel and door.

After the adjustment, the modification of the seats for the VAZ 2114 begins. Usually, a profile pipe is used on which they are fixed. Or they weld it to the slide, modifying it to fit the factory studs.

A lot depends on imagination and experience. For example, in the photo the fastenings were modified in a similar way.

Oddly enough, the seats from Lancer 9 in the interior of the VAZ 2114 look very harmonious.

Many people use seats from Subaru cars. They are quite affordable, can be found within 5,000 rubles. Replacement occurs on the same points as in the situation with the past. In this case, designs from Subaru Forester .

But remember that when using seats from a right-hand drive car, a large number of settings will be received not by the driver, but by the passenger. Of course, they can be swapped, but access to the settings will be limited, since the settings are usually located on the door side, but you will have them on the tunnel side. Ready-made anatomical seats for the VAZ 2114

How to lower the back seat on a VAZ 2112

The rear seat of the VAZ-2111 and VAZ-2112 cars is made of two parts: the right part is a folding single seat, the left part is a folding double seat. By folding the left or right side of the seat, you can significantly increase the volume of the luggage compartment.

10.6. Rear seat: 1 – hinge; 2 – belt; 3 – pillow; 4 – back; 5 – back lock handle; 6 – lock retainer

To fold the seat, pull the belt 2 (Fig. 10.6) and lift the cushion 3 to a vertical position. Remove the head restraints, pull up handle 5 and unlock the backrest fastening lock 4. Lower the backrest horizontally.

To remove the rear seat you will need a 10mm wrench.

1. Fold down the seat cushion.

2. . and, unscrewing the hinge fastening nuts, remove the pillow.

3. Release the seatback latch (as when folding it).

4. . and, having unscrewed the four nuts securing the hinges to the body, remove the seat back.

5. Remove the second half of the seat in the same way.

6. Install the parts in the reverse order of removal.

Reference manual for servicing VAZ, LADA 110 cars.

Ignition adjustment 2110. Engine compression for VAZ 2112, immobilizer for VAZ 2111. Valve cover for VAZ 2112, cylinder block gasket for VAZ video. The cost of a generator for a VAZ. replacement of fuses for VAZ 2112, design of the oil receiver for VAZ 2112. oil recommended by the factory for the box of VAZ 2112. replacement of the water pump (pump) for VAZ 2112. Replacement of valve stem seals for VAZ 2110.

The rear seats on VAZ 2110, 2111 and 2112 cars are slightly different in their mounting design, so the procedure for removing them will also be different. In this example, the 2110 will be considered, since I had this particular machine on hand.

So, the first thing you need to do is remove the lower part of the “sofa”. To do this, on both one and the other side from below, you need to move a special lever to the side and move the seat.

The final result on one side is shown in the photo below:

On the other hand, everything is done in the same way, so there is no point in considering everything separately.

Regarding the back, everything is also quite simple. The first step is to pull the loop up to open the lock:

And at the same time we move the back forward, as is clearly shown below.

And to finally remove the back, lift it up a little, thereby removing it from the lower hinges:

The second half of the backrest is removed in the same way.

Now all that remains is to remove the armrest, which is attached separately from the backrests. To do this, you need to unscrew one screw attaching to the brackets from below, on both one side and the other: