A very popular model of the French automobile industry, Renault Logan, rightfully occupies a leading position in the Russian market. Despite its budget class, the car is very reliable and practical to use. What makes Logan so versatile is its decent ground clearance and sufficient trunk capacity. But what if you need to transport large cargo by car? After all, the rear seats on this car do not fold down!
In the video there is a moment on how to remove the back seat and raise the backrest!
How to remove the rear seat of Renault Logan
You can even talk in a whisper while driving in a car.
Good cross-country ability of the car, thanks to the good ground clearance. A remarkable advantage necessary for traveling on Russian roads. For a relatively inexpensive price, you get a pleasant interior, ease of operation, comfort, traffic safety and confidence in the future.
Renault Logan is one of the most popular foreign cars in Russia. This car is assembled on the territory of our country, which reduces the cost of its transportation.
Let's look at how to remove the seats on this car. Instructions To remove the front seat, you only need a socket wrench and a little patience. Carefully move the seat back as far as possible. To do this, find the locking lever on the lower left side, pull it up, and at the same time move the seat.
Then release the handle and lock the chair in the position you need at the moment.
How to remove the back seat on a Renault Logan
Find two bolts that secure the seat slide to the bottom of the car body, and a video on how to remove the rear seat of a Renault Logan. Return the seat to its original position by moving it. Remove the bolts that secure the back of the slide. After this, carefully remove the seat from the car. Remember that when reassembling, you must apply an anaerobic thread locker to the threads of the mounting bolts.
Locate the airbag clips located at the base of the body and carefully remove them from the holes. Be careful not to damage these fasteners. Video on how to remove the rear seat of a Renault Logan; then remove the cushion itself from the car. Unscrew the bolts that are located to the left and right of the seat back.
They are designed for fastening the backrests of the seats to the rear partition of the body. Carefully lift the backrest, then remove the latches that secure it to the rear partition of the machine body.
Move the seat belts to the side and pull the backrest out. This procedure is best carried out together with an assistant, which will greatly facilitate and speed up the process. For further installation, do everything in the reverse order. Make sure that after installing the rear seat back, the latches fit exactly into their holes in the rear partition of the body.
After this, put the rear seat cushion in its place. There's an answer! How to remove the back seat from a Renault Logan Owners of Renault Logan are sometimes faced with the need to transport bulky cargo that exceeds the size of the car trunk. In this case, transportation can be carried out using a special trunk mounted on the roof of Logan.
Step-by-step instructions for dismantling
Before starting work, we prepare the necessary tools. To remove the seats we will need:
- flat and Phillips screwdrivers;
- key to 10;
- pliers;
- repair kit (depending on the situation).
It is better to work with gloves so as not to accidentally injure your hand on sharp metal corners.
The procedure is as follows:
- Unfasten the rear seat upholstery buttons on the trunk side.
- Pull back the loop and remove the latch near the headrest.
To get to the latch, you need to pull the loop near the headrest
- We pull out the hooks on the back from the metal brackets that are on the body. Remove the hooks that hold the seats to the body
- The armrest mounting frame is fixed with three screws; we unscrew them for further dismantling.
- To remove the armrest itself, use a 10mm wrench and unscrew the nuts.
Use a 10mm wrench to remove the armrest fastening nut.
- The mounting pad is secured with two latches; we press them out with a flat-head screwdriver.
To remove the mounting pad, press the two latches - Unscrew the fastening bolt and pull out the seat cushion lock.
After unscrewing the mounting bolt, the lock can be easily removed
- Dismantling ends by unscrewing the last two nuts with a 10mm wrench, after which the base of the lock is removed.
Currently reading: Removing air from the Renault Logan 2007 clutch, instructions online | New Logan
We recommend: How to check the expansion tank plug
Rear seat removal process
Removing the rear seat on a Renault Logan is quite simple; you just need to have a wrench, a screwdriver and a pair of hands of a reliable friend nearby, since the back of the seat is quite heavy.
First of all, we take out from the car everything that will only interfere with further work, such elements include rubber mats and a rear parcel shelf.
- Next, we remove the fasteners that hold the seat cushion in place; if they do not work the first time, you should lightly treat the areas with WD-40 (the connections should be handled carefully, without staining the seat upholstery). Once everything is done, try to lightly rock the seat from side to side. From such movements they will easily return to working condition and let go of the pillow.
We pull the pillow by its base.
A similar element of the rear seat is best removed with an assistant.
You only need to unscrew two bolts on the left and right sides.
If the seat belts are faulty and prevent you from doing what you intended, simply remove them from their mountings. To do this, remove the cover from its buckle and unscrew the bolt securing it. And then, using a flat-head screwdriver, remove the screw securing the trim located in the center of the body.
- We take out the belt bracket; to do this, you need to pull off the lining. You will feel some serious resistance from the fasteners while doing this type of work, but don't worry, they are designed to remain intact even in an accident. So, breaking them will be quite problematic.
- After the bracket itself, we remove the “tongue” of the seat belt itself.
- We remove the bottom bracket, the trim and take out the inertial coil assembly.
After this, when the rear backrest is completely free and nothing interferes with it, with the help of an assistant we pull it out of the cabin.
Note!
Before loading additional weight into your vehicle, consult your Logan's owner's manual for help. Since for cars with different engine sizes, the load capacity will be different.
Also, pay special attention to maintaining the integrity of all small parts and fasteners. If at least one of them breaks during assembly, you will get one uncomfortable rear sofa that will only “walk” easily when traveling on it.
Seat belts
They somewhat interfere with further actions. If they are not working and do not come out of the bracket, it is easier to simply remove them from the mounts. For this purpose, the pad on the buckle is removed and the corresponding bolt that holds it is unscrewed. Next, remove the screw that secures the body covering from above to the central pillar.
Otherwise, in order not to have to deal with additional installation of the belts in place, they are pulled to the sides and tucked under the bottom of the backrest. All you have to do is lower it into the seat place - and here you have the coveted additional trunk volume.
It is worth noting that the reverse process will be somewhat more complicated: you need to touch the removed bolts into the corresponding holes.
How do car seats fold out?
To fold the seats in a car from France Renault Logan, you need to do a few simple manipulations:
- All front seats, including the driver's seat, can be reclined using the seatback tilt adjuster; you need to lower the backrest even to the level of the rear row seats, and then you get a spacious sleeping area that will appeal to those who like to travel.
- In the 2nd version of the Logan model, all rear seats can be easily and simply folded out using locking buttons, and you will not achieve a flat floor, but this design is much better compared to the 1st generation Logan.
- The 1st generation model initially did not have the ability to fold out the rear row of seats, and the only way owners had to increase space was to completely remove the backrests of the rear seats from the car.
In conclusion, I would like to note that the process of removing and, of course, unfolding car seats in a Renault Logan car with your own hands is easy and simple, and intuitively understandable to all car owners, regardless of what skills they have or how long their driving experience is. However, many are interested in how to replace the original seats; experts say that it is possible to replace them with any chair, the most important thing is that it is suitable in size and fastenings.
Advertisements on NN.RU - Auto
Power take-off boxes Kamaz, Maz, Ural, Kraz, Gas, Zil Dispatch on the day of payment. Sending by transport companies. We work as with. Price: 18,500 rub.
Extend the chassis (frame) on Gazelle Next, Gazelle farmer under a body of 4.2 m, 5.1 m and 6.2 m. Extend the frame on Gazelle Next, Gazelle Gas 3302. Price: 25,000 rubles.
With us you can not only extend the frame to fit a body of 5.1 m, 6.2 m, 7.5 m, 9 m for Maz Zubrenok, Maz, Kamaz, Ural, Zil, Mitsubishi, Nissan.
A specialized company for the conversion of trucks produces extensions for man man, iveco and iveco truck tractors.
Two more recycling collection points have been launched in the capital of the Volga region, the administration of Nizhny Novgorod reports. Total in the city now.
An explosion occurred on the territory of a military unit in Achinsk near Krasnoyarsk: a storage facility for gunpowder charges for artillery caught fire.
Already today, the most impressive starfall of 2022 can be observed in the sky of the Nizhny Novgorod region. Nizhegorodsky reports this.
Imagine, you wake up in the morning, open the curtains, bright sunlight bursts into your apartment, and outside the window is a stunningly beautiful landscape.
Any car owner sooner or later is faced with the need to unfold or fold the seats in his car, including, of course, the French model Renault Logan. Often the rear seat is affected, but sometimes the front seats also need to be folded down.
The process of folding and repairing seats
This is easy to do if you unscrew the small bolt under the trim. The top securing screw can be removed using a flathead screwdriver. You are unlikely to be able to break the seat belt fastenings during dismantling. After all, they are designed to withstand the overload of an emergency situation. You will need to pull out the bracket.
To do this, you need to move the front material of the belt. After this, unscrew the four screws and remove the bumper. If they remain in place, then be careful not to make sudden movements when disconnecting the bumper.
When carrying out further work with the removed part, it is better to disconnect the headlights to avoid their breakage. Related video Tip 4: The main reason is ease of use and safety.
His design is a combination of workaday life and shabby simplicity.
But once you get inside and take off, you begin to be more and more amazed at his abilities. Women like the kick-down mode, which allows you to instantly engage a lower gear and hold it for quite a long time. In this case, the car drives at an acceptable speed in traffic, although it is a little noisy.
The automatic transmission handle attracts motorists with the pleasant texture of the material.
Of course, the main advantage of Renault Logan with an automatic transmission is that it is easy and convenient to handle. The car is quite powerful and you can see this not only on the highway, but also in the city.
The engine runs quietly, uses oil sparingly, and the tank is filled with familiar gasoline. The machine is equipped with a manual control mode, but it is almost never used. The automatic transmission works smoothly. Speed modes switch very quickly. In winter, it is convenient to use the driving mode in second gear.
Necessary tool
Replacing a wheel on a Honda Dio is not difficult to do. Even an inexperienced beginner can slowly complete the task in 20 to 40 minutes.
To do this you need a modest set of tools:
- hex heads for 24, 12, 10
- a wrench and a small extension for the wrench.
If you need tire mounting and you want to repair it yourself, you will also need the following tools:
- a metal cap for unscrewing the nipple (spool valve),
- a vice for squeezing the tire and removing it from the wheel rim seats,
- 2 - 3 motorcycle mounts for tire removal,
- a compressor for inflating a tubeless tire, and if the tire has a tube, then a regular pump is sufficient.
Folding out the seats
The process of folding seats occurs in several stages:
- the front seats (driver's) can be folded out using the backrest tilt adjustment knob, with its help you can lower the backrest to the level of the elements of the rear row - the result is a full-fledged sleeping place, which will be appreciated by owners who love to travel;
- the rear seats in the second generation of Renault Logan are folded out using release buttons - this does not result in a flat floor, but this design is much more convenient compared to the first generation of the car;
- in the first generation, Logan did not have the ability to fold out the rear row; owners had to completely dismantle the back of the rear row.
The process of dismantling and transforming Logan seats with your own hands is extremely simple and will be understandable to any car enthusiast, regardless of the skills and experience of driving a car.
We remove the rear seat of a Renault Logan ourselves
A very popular model of the French car industry, Renault Logan
, really occupies a leading position in the Russian Market. Despite its economy class, the car is very reliable and practical to use. What makes Logan so versatile is its solid ground clearance and sufficient trunk capacity. However, what should you do if you need to transport large cargo by car? After all, the rear seats on this car do not fold down!
In the video there is a moment on how to remove the back seat and raise the backrest!
One look at a Renault Logan with an automatic transmission is enough to make you feel sad. His design is a combination of workaday everyday life and wretched simplicity. But when you find yourself inside and take off, you begin to be more and more amazed at his abilities. It’s gratifying to feel the acceleration to 100 km/h, which is about 2 seconds slower than the mechanics, and it’s no less gratifying to realize that the car has a brave 16-valve engine. Women like the kick-down mode, the one that allows you to instantly engage a lower gear and hold it for quite a long time. In this case, the car drives at an acceptable speed in traffic, although it makes a little noise. The automatic transmission handle attracts motorists with its glorious texture of the material. Finally, the main advantage of Renault Logan with an automatic transmission is that it is easy and comfortable to handle. The car is strong enough and you can verify this not only on the highway, but also in the city. The engine runs quietly, uses oil sparingly, and the tank is filled with cool 92-octane gasoline.
Basically, you can only come across correct reviews from motorists about Renault Logan. The machine is equipped with a manual control mode, but it is rarely used. The automatic transmission works smoothly. Speed modes switch very quickly. In a Renault Logan car with automatic transmission, the driver feels comfortable and confident while driving in a metropolis. In winter, it is comfortable to use the driving mode in 2nd gear. This can be done by pressing a special button. This is especially necessary in cold or icy conditions. Owners of a Renault Logan car enjoy adjusting the side mirrors, height and heated seats, since all this can be done mechanically without any special effort. The main advantages of a Renault Logan with an automatic transmission, according to car enthusiasts: 1. Irregularities on the road are barely noticeable. The reason is the excellent suspension of the car.2. Spacious interior in which you feel comfortable and relaxed.3. Thoughtful modification of windows creates a wide view.4. While driving in a car, you are allowed to talk even in a whisper.5. Excellent cross-country ability of the car due to the successful ground clearance. Delightful superiority, necessary for movement on Russian roads. According to owners of Renault Logan with automatic transmission, the most basic superiority of the car is expressed in the combination of price and quality. For a relatively inexpensive price you get a nice interior, ease of operation, convenience, traffic safety and confidence in the future.
How to remove the back seat from a Renault Logan
If you have to transport large items quite often, then it makes sense not to reinstall the rear seat back bolts.
This will significantly speed up the removal of the backrest - to do this, it will be enough to lift it, remove it from the fastenings and pull it out of the cabin.
It is convenient to transport the removed backrest of the Renault Logan rear seat by placing it between the backrests of the front seats and the raised seat of the rear sofa or in its place. In addition, there is another way to quickly increase the trunk space of Renault Logan by installing the rear seat back on small door hinges, as shown in this video. Release the rear parcel shelf and remove the floor mats.
Seat belts
They somewhat interfere with further actions. If they are not working and do not come out of the bracket, it is easier to simply remove them from the mounts. For this purpose, the pad on the buckle is removed and the corresponding bolt that holds it is unscrewed. Next, remove the screw that secures the body covering from above to the central pillar.
Otherwise, in order not to have to deal with additional installation of the belts in place, they are pulled to the sides and tucked under the bottom of the backrest. All you have to do is lower it into the seat place - and here you have the coveted additional trunk volume.
It is worth noting that the reverse process will be somewhat more complicated: you need to touch the removed bolts into the corresponding holes.
How to remove the backrest of the Renault Logan rear seat
We take the back seat of a Renault Logan ourselves
A very popular model of the French automobile industry, Renault Logan, truly occupies a leading position in the Russian market. Despite its budget class, the car is very reliable and practical to use. This versatility gives the Logan decent ground clearance and ample trunk space. But what if you need to transport bulk cargo by car? After all, the rear seats in this car do not fold down!
In the video there is a moment on how to remove the back seat and raise the backrest!
Rear seat removal process
Take off
The back seat on
a Renault Logan
is quite simple, you just need to have a wrench, a screwdriver and a pair of hands from a trusted friend.
back
seats are quite heavy.
First, we remove everything from the car that will interfere with further work, for example, rubber mats and a rear parcel shelf.
- Then remove the clips that hold the seat cushion in place, if they are not exposed the first time, the seats should be treated with a little Wd-40 (The joints should be handled carefully without contaminating the seat upholstery). As our client remains treated, try to lightly rock the seat
from side to side. From these movements they will easily return to working condition and release the pillow.
Pull the pillow towards the base.
Advice from experienced people
Our people, naturally, managed to come up with several tricks to defeat the technical short-sightedness of the French.
If you don't have a garage
, where you can leave removed “spare parts”, or it is supposed to take cargo there and pick up people back, then the pillow returns to its place, and the backrest is inserted between it and the front seats.
If you often need a voluminous trunk, the bolts securing the backrest are completely removed. The disassembly process speeds up significantly: picked it up, pulled it out, took it off. Some criticize the “know-how”, they say, they would immediately buy a hatchback with a large trunk volume, but life makes adjustments: it is impossible to predict what will change tomorrow. So, if you are faced with such a problem, take advantage of the flight of Russian engineering. True, it is better to save the bolts in case the extended trunk is no longer needed so often in the future.
In principle, knowing how to remove the rear seat on a Renault Logan, and with a little skill, you can do it alone and quickly enough.
