Automatic engine start to make getting into the car even more pleasant

How to check if there is autorun?

The verification algorithm is not that complicated, follow all the steps sequentially:

1. Put the car on the handbrake, move the gear selector to neutral position.
2. Turn off the ignition; if the engine stalls, use the starter to start it again.
3. Next, on the Starline key fob, press the button with the key icon.
4. Now try to remove the key from the ignition, if you succeed, then your car has auto start. When you lock the doors, the engine will automatically stop after 30-60 seconds.

If, when you press the autostart button, you hear the engine cranking, but the engine does not start, you should check the settings. Read the security alarm operating manual carefully, then you can configure its operation correctly.

Enabling or disabling autorun

Both enabling and disabling the option using the Starline A94 key fob occurs by pressing the necessary buttons and selecting certain menu items on the screen. Both procedures are very similar. Essentially, any automatic start option is turned on in the same way as it is turned off.

How to enable and disable autostart of Starline A94 by time

The option is activated via the main key fob. To do this, place the cursor over the icon with the image of a clock and press button number three. The car will react by flashing its dimensions, and the remote control display will show the time remaining until the factory starts. This time appears only for five seconds, after which the current hour display resumes.

The vehicle engine can be activated by a timer - this means that it will start regularly at a certain frequency. The manufacturer allows you to set any time period up to a day, and the pause between each start must be at least two hours. If the start is unsuccessful, the cycle ends.

This option is enabled via the indicator on the LCD display of the main control panel - the cursor is placed on the clock icon and the third key is pressed. By briefly pressing this button I also adjust the time and winding steps. Each press increases the period by 2 hours. To save the settings, wait for the key fob to automatically exit the menu. To remove the option, select the same icon, but press not the third, but the second button.

Another possibility is a car factory on an alarm clock. In this case, the motor turns on regularly at one predetermined time. To activate this function, use the clock menu, repeating all the manipulations described above. You can learn more about setting the alarm clock from the video.

How to set autostart based on temperature

The Starline A94 anti-theft system allows you to set automatic engine start based on ambient temperature thanks to the presence of a special sensor. The manufacturer allows you to select the thermometer value that activates the motor within the range from -27 to -3 degrees.

• set the cursor on the display of the main control panel to the icon with the image of a thermometer;
• briefly press the third button and wait for light and sound signals, both from the car itself and from the key fob;
• wait until information about the current air temperature appears on the screen;
• using short-term pressure on the third key, set from the proposed values ​​the temperature at which the engine will begin to warm up - each press is equal to a change in the thermometer reading by three degrees;
• save the settings by simply waiting for the menu to automatically exit without pressing any other buttons.

Disabling the autostart option based on temperature sensor readings occurs in a similar way to enabling it - through the preliminary selection of the icon with the image of a thermometer with the cursor. After this, press the second key and wait for the side lights to blink twice. As a sign of successful execution of the command, the temperature indication disappears on the screen, and the key fob makes a melodic sound.

Selection of alarms and selection of tools

First of all, the car enthusiast must purchase a set of devices that are suitable for a specific car.

In order for the independent installation of an alarm system on a car to be successful, it is important during the selection process to remember the type of engine (gasoline or diesel) and the features of the transmission (mechanical or automatic). And the rest of the set of options will be determined by the level of comfort that the driver wants to receive from the alarm

For successful work, you will also have to collect a small set of tools and simple materials. Connecting an alarm system will require:

• Phillips screwdrivers;
• set of wrenches;
• sharp knife;
• lighters;
• black electrical tape;
• double-sided tape;
• multimeter;
• foam rubber.

Installing an alarm system with auto start is a rather complex process, so the average car enthusiast is better off entrusting this work to experienced specialists at specialized auto centers.

Overview of engine autostart modules without alarm

ALARM SMART GSM

This module supports control using:

mobile application;

GSM smartphone;

standard key in Slave mode.

Adapted to Ford, Hyundai, Infinit, Kia, Lexus, Nissan, Suzuki, Toyota cars (there are models for other manufacturers).

The price of an engine autostart module without an alarm along with installation is more than 25,000 rubles.

The advantage of remote starting using a mobile application is the ability to control from almost anywhere in the world where there is Internet access.

But this advantage is not always justified. What's the point of starting the engine if the car is at a considerable distance? Perhaps, in this case, it is better to activate control functions based on time or engine temperature to periodically warm up the car.

ALARM SMART

A device with similar functions, but without a GSM module. The price with installation is more than 15,000 rubles.

The disadvantages include a limited number of supported models.

ALARM START BMW KEY

This system is not equipped with a GSM module, it is adapted for BMW cars, the price with installation is more than 25,000 rubles.

Starline

A lower price category for autostart without alarm is represented by Starline modules. Their comparative characteristics are given in the table.

Functionality of Starline autostart modules:

remote activation (SMS, mobile application);

programmable on timer;

launch at intervals;

warming up according to the engine temperature level (switching threshold from -30 to -1 in steps of one degree Celsius);

forced engine blocking.

A key crawler can be organized using a second regular key (in addition to the cost of about 1,000 rubles), with the production of a copy of the key (about 2,000 rubles) or a keyless crawler (from 6,000 rubles).

For Mercedes models, different blocks are used. Their cost is much higher.

Supports starting from the standard key and GSM module.

Autostart modules for BMW are a little cheaper.

STARTFONE

Video - review of the STARTFONE autorun module from Fortin:

Installation of autostart without alarm is carried out by specialized service stations.

Adapting the autorun module yourself can be difficult. If such a device is installed at a service station without the appropriate certification, in most cases the warranty on the electrical equipment of the car is lost, since unauthorized intervention is carried out in this system. Considering that all vehicle systems are connected in one way or another to electronics, warranty specialists may refuse to support obligations for the entire vehicle.

Video - installing auto start without an alarm on a Chevrolet Aveo:

Connection

Following the instructions from the alarm, you need to connect the following wires:

• to the button for turning on the handbrake light (without the handbrake, autostart will not work)
• to the neutral or parking sensor (to prevent starting at speed, for an automatic machine you can use a parking “indicator light”)
• according to the instructions, or at your choice, if not indicated, we connect the engine start detector (this could be a tachometer, a charging or oil pressure light, an ECU)
• connect to the brake pedal (if not connected previously)
• energize the stove or air conditioner (we recommend low speed)
• install the ignition key bypass circuit (indicated in the instructions)
• connect and hide the immobilizer bypass system well
• We assemble the relay block (according to the diagram)

Next, we program the time for turning on the starter, the pause time to determine the start and the time for the second start of the starter, if the engine does not start, if necessary, program the turn on of the stove (air conditioner)

Typical engine control system connection diagram:

Programming

In cases where there is a need to increase the engine cranking time, it is necessary to reprogram the central alarm unit. The default time on most models is 0.7 seconds. But not everyone has the option of software zoom. To do this procedure, you need to refer to the installation instructions. It contains a description of all the functions, as well as how to enter programming mode.

In addition, to change the alarm settings, you need to connect the Valet button and LED indicator. It also wouldn't hurt to have a speaker instead of a bell so that all settings can be controlled. On cars, the whole procedure consists of alternately turning the ignition on and off. This action must be alternated with pressing the Valet button. By the number of flashes of the LED indicator, you determine which function settings you are in. This is how you can easily autostart a car with your own hands. The alarm connection diagram is always provided by the manufacturer.

We install autostart with our own hands

Before you begin the installation work of the autostart on the VAZ, you need to prepare everything required for this. Installing one alarm will not be enough; it will require long and painstaking work. To bring your plan into reality, you will need to prepare the following:

• alarm system with auto start, in this case you can use the simplest model from the manufacturer StarLine;
• a temperature sensor and a controller are purchased separately;
• small electric drive, can be used from a Ladovsk washer;
• a thin cable, preferably soft, made of copper or aluminum, but it is better to give preference to the copper option;
• wiring in the required quantity, it is better to prepare with a reserve;
• In addition, patience will be required, since setting up equipment and autostarting a carburetor is a long and painstaking process.

Scheme for installing autostart on a carburetor

You can start assembly by turning off the manual choke, which is installed on any VAZ carburetor engine. In this case, you don’t have to pull out the cable, but secure it securely under the hood. There is a high probability that it will be useful for something in the future. If you have an auto choke on your car, then it will have to be completely disassembled. The carburetor is completely disassembled and all sensors are removed from it. The last step before assembly is to switch the feed drive to external.

Stages of installing a do-it-yourself autostart on a carburetor

To install a start-up signal on a carburetor engine, the following series of actions must be performed sequentially:

1. First of all, all the components of the structure are placed in their places. The electric drive can be installed on the engine wall. The temperature sensor is mounted on the engine. You should not use an old sensor, as there is a high probability of making a mistake. The microcontroller will need to be placed next to the electric motor, although in some situations it is better to attach it to the carburetor.
2. Using a previously prepared cable, the engine is connected to the damper.
3. All parts of the suction pump should be connected to a microcontroller, which in turn has a direct connection to the signaling system.
4. Next comes a test test, if the system gives a response, then you can move on to the next stage, if there is no feedback in the carb, then you have to recheck the entire connection again.
5. The entire system is tested and brought to perfection. The microcontroller will have to change several operating modes taking into account the temperature sensor readings. You should also adjust the length of the cable as much as possible. Once the system has been tested, the first test run can be performed.

The final stage of installing autorun

It is possible to fully start the engine using the key fob only after installing the air damper servomotor. The device, as a rule, is placed on the wall of the engine compartment, while others, on the contrary, try to mount the element directly on the carburetor. By installing this element, you can forget about the position of the air barrier. This device is produced under the Sadko brand. The model is produced in two types:

1. Standard equipment, which includes a microcontroller, control unit, cable, electric drive and temperature sensor.
2. The maximum configuration, which contains all the previously listed devices, as well as some additions.

The maximum configuration of "Sadko" is distinguished by the following indicators:

• Having received a signal from the alarm key fob, the damper automatically opens slightly;
• Next comes fuel injection;
• after which, due to the control unit, a spark is supplied, which starts the engine for warming up.

If you decide to give preference to the standard set, then you will have to manually configure the entire system, since there may be a problem due to inaccurate calculations and installation, namely:

• The ignition is turned on first and the damper is closed manually;
• after the engine is running normally, you have to close the damper again with your own hands;
• after waiting for some time, you have to completely open the fuel supply;
• the machine should run for some time at idle speed without outside intervention;
• At the end the engine stops and cools down completely.

Upon completion of everything, all that remains is to test start the car with a button from a certain distance, which is accessible for the alarm.

Car autostart via phone Return

Do-it-yourself replacement of VAZ 2114 engine mounts

Recently, the interests of car enthusiasts have been shifting towards installing more functional car alarms. Moreover, we are talking not only about security functions, but more about auxiliary ones, which greatly simplify the process of using a car alarm and preparing the car for a trip. One of the most popular functions of car alarms is the remote engine start function, which allows you to prepare the car for a trip in advance, spending virtually no time on it. Under our weather conditions, with temperatures from -30 to +30 °C, this function is very important, since in winter it allows you to get into an already warmed-up car, and in summer into a cool interior. Everything would be fine, but simple car alarms with auto start have one big drawback - the short range of the key fob, which is why it is not always possible to use this function, as well as the ability to control and set commands exclusively from the key fob. In this situation, auto-starting the car via your phone can help out.

Homemade autostart systems

Recently, the topic of self-assembly of autostart systems has been popular, primarily due to the availability of Arduino-like modules and expansion boards for them, including relay units (simulate the operation of the ignition switch) and GSM modules for control via SMS.

However, such homemade products are primarily the domain of qualified radio amateurs, and you should not blindly repeat designs from the Internet. First of all, because the safety of such systems, unlike factory autostart modules, is not tested by the creators: the likelihood of seeing your car ramming your neighbors in the morning outweighs the pleasure of creating a useful device with your own hands.

Using a telephone - is it possible?

But what to do if the engine starting time is very long? A time relay must be used. But this is not always possible to implement, so it is quite reasonable to use a cellular network. In addition, this is relevant for systems that are located at a considerable distance. Even if you are in another region, it is possible to start a generator, for example, in a greenhouse, to provide heating. But you need to adhere to some requirements, which will be discussed below. Autostart must correspond to them. It’s not difficult to do everything with your own hands. You will also need to change the design of the phone used as the autostart tool.

Best modules

Today, the market for auto parts, accessories and electronic systems offers a wide selection of autostart modules. Among other modifications, it is necessary to highlight AlarmStart GSM. Such a module costs 29,900 rubles. This is a universal kit that allows you to activate the internal combustion engine using a key fob or mobile application. The system is completely autonomous and does not require integration with an alarm system. It works independently of different automotive technologies. You can launch such a module with a phone call. Commands are also received via SMS messages.

Car owners will be able to activate the function by pressing the corresponding button in the mobile application. AlarmStart GSM also has a programmable timer, which can be adjusted depending on the wishes of the owner. This kit is suitable for any make or modification of car.

No less interesting is the AUTOLIS Mobile

(RUB 29,600). This module is equipped with an Italian-made GSM modem. It is necessary to note the presence of a voice interface. Consequently, owners of this kit will be able to give voice orders. Has equipment and an SMS alert option. Commands can be issued online.

The module is reliably protected from hacking attempts via GSM communication. The same GSM system is responsible for setting coordinates while moving through unfamiliar terrain. You can control such a module using any modern gadget.

The module is configured according to the individual needs of the car owner. Each user will be able to choose the method of notification and autostart of the internal combustion engine. Performs a set and function of a car alarm. It will notify the car owner of any danger in the shortest possible time.

StarLine S96BTGSM

– another functional solution to the problem with remote autostart of vehicles. This security and telematics complex was developed in 2022 and is in great demand on the market. It will cost car owners 10,990 rubles. Using this module, launch can be done in the following ways:

1. From a smartphone;
2. BluetoothSmart;
3. GSM interface;
4. Interfaces 2CAN+2LIN.

This kit can be installed quickly and absolutely safely. It should be noted that the module is extremely energy efficient. With this equipment, the driver will be able to monitor the condition of the car remotely using a mobile application. In addition to starting the internal combustion engine, the interface can also be configured for heated seats, auto glass or steering.

Among the autonomous engine autostart modules, it is necessary to highlight Data StartVW (RUB 12,500), which is programmed online. Most often, such kits are installed by owners of Volkswagen, Skoda and Audi. On sale you will find two versions of this kit. The first one comes with a remote control. And the second one has a one-button analogue. Devices communicate with the antenna via a reliable channel. AES-128 encryption is used, which eliminates system hacking and car theft. Such a kit can be installed in conjunction with an alarm system or independently.

When choosing remote engine start units, you need to pay attention to the domestically produced Autostart module. This kit costs only 3990 rubles

It is produced by the company, which has been producing protective systems for vehicles for more than 10 years. In order for the engine to start using such a module, the driver needs to press Lock four times. The kit is easy to use. And it is installed very easily, without the involvement of specialists. You just need to connect the wires correctly.

Conclusion

Modern autostart modules for internal combustion engines help to achieve the optimal operating temperature of the entire vehicle and prepare the interior for the driver and passengers. They differ in their functionality, reliability and durability. In the winter cold, such systems are responsible for warming up the main unit of the vehicle, and in the summer heat they help cool the interior by starting the air conditioners.

However, we should not forget about the increase in energy and fuel costs when installing such units. Excessive fuel consumption is a serious problem for most car owners. Therefore, it is better to make the final decision on installing such equipment taking into account all the positive and negative aspects.

Video about autostarting a car engine:

Pros and cons of automatic start technology

Like any other device, autostart for a car without an alarm has its positive and negative sides. Its obvious advantages are:

• Complete preparation of the engine for operation in advance. By the time the driver hits the road, the engine will already be started, brought to operating speed and warmed up. You don’t have to waste time and go straight away - and in the winter season this saves a lot of time.
• Comfortable conditions in the cabin. The heating system or air conditioning usually starts together with the engine. Thus, by the beginning of the trip, the inside of the car is already warm or cool, depending on the time of year.
• Autostart is indispensable on trucks, where frozen hydraulics can damage the entire vehicle.

Vulnerability

Automatic start of a car without an alarm system attracts the attention of car thieves or thieves - and you can lose either the car or valuables left in the cabin. Operation of the engine together with an alarm and immobilizer is usually impossible

Therefore, you can use the device without an alarm only in a guarded parking lot, or when the car is in the owner’s field of view. Excessive fuel consumption. The electronic unit must be carefully configured; without this, it will drive the engine at those speeds that it considers normal. In addition, starting by a timer or temperature sensor will cause the machine to turn on itself, even when it is not required. This problem is solved by correctly configuring the sensors and programming the unit itself. Winter autostart in a parking lot often leads to freezing of the muffler, in which condensation accumulates. To avoid this, you need to set a limit on the operating time of the motor. In practice, about 10 minutes is enough, after which the engine can be turned off. Without a gear sensor, automatic starting is dangerous: if the driver forgets to put it in neutral or does not apply the handbrake, the car may well roll away. In the past, it often happened that the driver accidentally pressed the autostart remote control in his pocket when the car, for example, was standing at a traffic light with the gear engaged - and without his participation the car was thrown into red. The only method to solve the problem is to use high-quality sensors.

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.

Purpose and principle of operation of autostart without alarm

p, blockquote 6,0,0,0,0 —>

The purpose of the autostart system is to preliminary prepare the climatic and technical characteristics of the car before making a trip, namely:

p, blockquote 7,0,0,0,0 —>

• prepare (warm up) the engine for the trip;

• bring the car’s climate control to “zero” readiness: operation of the heating system (in winter) or cooling (in the hot season) immediately after the driver and passengers have boarded;

• recharge the battery during long-term parking to eliminate starting problems.

adsp-pro-1 —>

The operating algorithm of the autostart system can be organized:

p, blockquote 8,0,0,0,0 —>

• using direct control of engine starting using a remote control (key fob) or other communication systems (GSM, etc.);

• at the programmed time;

• by engine temperature;

• according to the voltage level of the vehicle's on-board network (battery).

Such systems usually include the following components and blocks:

p, blockquote 9,0,0,0,0 —>

• head electronic control unit;

• sensors (engine temperature, oil pressure, gearbox position, etc.);

• preheating relay;

• immobilizer bypass module;

• power relays;

• remote control keychain.

Car alarm with auto start, how to achieve interaction

Engine starting is designed to disable or bypass certain alarm functions. Therefore, it is very difficult for the autostart system to interact with the car’s security system. If the unit is connected to a security system, most alarm sensors are turned off, after which the ignition is activated. You can purchase an immobilizer bypass unit separately, as it is not expensive.

Those who develop security systems need to create types of security and protection while the engine is running. Often, when the engine is started, protection duties are assigned to the limit switches. One sensor is located on the brake light switch. When an alarm is received, all sensors turn on, doors are locked, etc.

How to install and connect

Installation and connection of the GSM module includes the following steps:

• Preparing the car. After removing the dashboard, the user has access to the head unit. If the machine is not equipped with a signaling device, the module is placed behind the control panel. The body of the part must not come into contact with metal parts.
• Disconnecting the control unit. It is necessary to remove all terminals with cables and dismantle the system element. The bolts are unscrewed using a screwdriver. The GSM module is installed in the place provided for this. The installation connectors on the board are marked accordingly to facilitate installation.
• Installing a SIM card. It is inserted into a special slot. A SIM card is included with some security systems. In this case, there are no problems with its binding. When using SIM cards from other operators, activation is carried out in advance by installing the part in the phone. It is recommended to disable the password request feature.
• Assembly of components. The removed board is installed in the case and securely fastened. The head unit is connected in the same way as disassembly. The previously disconnected cables are connected to it. After this, the dashboard is assembled, all decorative trims are returned to their place.

Autostart from phone or application

The modern and most convenient way to activate autostart on a car. Managing remote launch parameters and sending execution commands is available from any place where there is cellular communication and/or the Internet.

Below are the most popular models that are perfect for implementing autorun from your phone:

Price with installation: RUB 26,900.

Control occurs using a radio tag. The basic cost of installation includes the installation of the CBI-500 engine compartment module, which provides safe engine blocking, control of the hood locks and siren, and is equipped with a motion sensor.

Price with installation: 25,600 rub.

Pandora DXL 3910 PRO is a car security system with direct connection to two digital buses. Integrated 2xCAN, LIN, keyless autostart, GSM modem, IS-760 key fob, built-in motion sensor, built-in interior temperature sensor.

Price with installation: RUB 22,500.

StarLine S96 BT GSM is a car alarm system with a keyless start system from a smartphone, the ability to authorize using Bluetooth Smart technology and integrated 2CAN+2LIN interfaces. The system has an integrated immobilizer with a Bluetooth tag and a GSM interface for full control of the car from a smartphone at any distance.

Functional Features

Engine auto start
Auto start from a phone is a very popular function that allows the car owner not to worry about the distance to the car, since auto start can be carried out from almost any distance. To be able to autostart a car from a phone, the alarm must be equipped with an integrated GSM module, or the module must be installed in addition to the car alarm. A SIM card of any cellular operator is installed in the module, so interaction with the module occurs as between two mobile phones. Thus, remote engine starting from a phone can be carried out at any distance where there is a reception area of ​​the telecom operator’s GSM network.

But you need to understand that car alarms with an integrated GSM module will cost the car owner slightly more (both in terms of equipment and installation) than less functional car alarms. But for those car owners who really need autostart from their phone, this will not be an obstacle. And of course, autostarting a car via a phone is just one of the functions of the GSM module, but in fact the car owner will receive wider functionality. The car owner will also receive messages about the reasons for the car alarm, indicating the reason for the alarm (which will be very important if the key fob is outside the reception area), it is possible to send a command to block the engine and much more.

In almost any GSM systems, autostart can be accomplished in several different ways:

• by calling the SIM card number installed in the module

• via SMS message to the number of the SIM card installed in the module

• using applications for Android and iOS

Application. The application is installed on a mobile phone, thanks to which the car owner has the opportunity to use almost all the functionality of the alarm system and the module through a convenient interface - autostarting the car from the phone, monitoring the condition of the car, setting a control zone, remote engine blocking and much more. In truth, at the moment, there are some complaints about the performance of some functions of applications from Starline and Pandora, but both companies are constantly trying to solve all problems and improve their applications.

GPS module. In addition to the GSM module, the alarm can also be equipped with a GPS receiver, which will make it possible to conduct comprehensive monitoring of the car (real-time movement tracking and many other useful functions). In this case, car monitoring will be available via the Internet. A GPS receiver can be included in the car alarm kit, or a Beacon can be additionally installed to the system. Also, a GPS receiver is included in the package of functional GSM security systems.