Lada Kalina 2022 – Wheel and tire sizes, PCD, wheel offset and other specifications – Wheel Size.RU


Every Lada Kalina owner sooner or later faces the need to replace wheel rims. When you want to give the exterior of your “horse” a more attractive appearance, then you should take a closer look at the cast versions of the products. How practical is this? We will try to answer this question, which concerns a huge army of owners of products from the Russian automotive industry; it is also important to know that if you install other wheels, you will need a bolt pattern. We’ll also figure out what aspects you need to focus on when choosing, and what is the best tire size.

Standard disks and their parameters

Representatives of the first generation Lada Kalina were equipped with stamped versions of wheels with dimensions of 13-14 inches. Then light alloy options saw the light. They had a diameter of 14 inches.

When owners deliberately strive to lower the tire profile, they immediately betray themselves with a desire to install larger rims. For Kalina, you can use 15-inch options, which is what the manufacturer does in its sports modifications, but other options will require a bolt pattern.

All body versions of the Lada Kalina in the first generation (2003-2014), from civilian to sports versions, were equipped with the following list of wheels available from the manufacturer:

  • products "5J" to "13 ET40"; with them we can use the wheel size “175x70xR13”;
  • “5.5J” on “14 ET37”, the manufacturer included tires “175x65xR14” in the kit;
  • options “6J” on “14 ET37” has wheel size “185x60xR14”;
  • “6.5J” wheels on “15 ET35”, the wheel size “195x50xR15” goes well with them;
  • “rollers” “6.5J” on “16 ET45”; everything is serious here, because the tire size “195x45xR16” turns the Lada Kalina tires into real “bast shoes”.

Body modifications of the domestic model in the second generation (after 2014) were awarded the following wheel options and tire sizes like them:

  • “5.5J” on “14 ET35”, where we find tires “175x65xR14”;
  • go to options “6J” to “14 ET35”; they imply cooperation with “185x60xR14” tires;
  • product versions “6J to 15 ET35”, tires “185x55xR15”;
  • “6.5J” wheels on “15 ET35”, “195x50xR15” tires work with them;
  • flagships “6.5J” on “16 ET35”; such wheels “are not ashamed to put on” tires, and the tire size is “195x45xR16”.

Interesting moment! The “Norma” and “Standard” versions, which the manufacturer produced during the entire time the second generation Kalina was on the assembly line, are deprived of standard light-alloy products. The “luxury” Lada Kalina is able to please its buyer with such wheel options, especially since the developers here have provided the opportunity to choose between the “R14” and more respectable “R15” versions.

Tire pressure Kalina

This indicator plays an important role in car controllability. The grip of tires on the road depends on tire pressure.

The condition of the wheels is especially important when driving on wet, slippery or snowy roads. During vehicle operation, tire pressure may drop, so its value must be periodically checked with a pressure gauge.

If the indicator deviates from the standard values, the wheels should be inflated. It's not that difficult to do it yourself.

The pressure in the wheels installed on the front and rear axles is different.

The corresponding section of the instructions indicates what pressure in the Lada Kalina tires must be maintained: in the front - 2.2 bar, in the rear - 2.3 bar. This should be done if you are installing standard factory tires.

If the owner of the iron horse has equipped the car with tires with a wide profile, it is recommended to stick to the values ​​of 2.4/2.5 (for front/rear tires). Narrow or low profile tires should be inflated a little less: 1.8…2/2…2.2 (front/rear) bar.

Operating a vehicle in different climatic conditions also affects the recommended level of tire pressure. For winter it should be 2/2.2 bar, for summer - 2.1...2.2/2.2...2.3 bar. This applies to standard tires.

Information about what pressure should be maintained can be found not only in the instructions for the vehicle, but also on the door pillar (on the plate).

The table below clearly demonstrates what pressure should be provided in the tires of the Lada Kalina station wagon and other modifications of this family, as well as other characteristics of the wheels of these cars.

What disks are suitable as an alternative to the standard versions?

It's time to change the “original” wheels. The main thing here is not to overdo it, but to choose products that are as similar in design and geometric aspects as possible to the standard options. Note that the wheel parameters “don’t care” what body is in front of them (sedan or etc.).

To make the right selection, you will need to gain valuable knowledge such as:

  • the quantitative composition of the holes for the mounting bolts and the diameter of the circle, the conditional line of which passes through the centers of the indicated holes (“LZ*PCD”, for Kalina - “4*98”);
  • diameter of the central hole of the disk (“DIA”); for disks of this model it is equal to 58.6 mm (coincident with the hub diameter with tolerance);
  • the offset value (or “ET”), which varies in values ​​(to be specified later).

Let's summarize here.

1. The first generation of LADA Kalina in versions “1117”, “1118” and “1119” can be equipped with wheel versions from 13 to 16 inches with the following parameters:

  • bolt pattern - 4*98;
  • width – from 5 to 6.5 (inches);
  • departure – from 25 to 35.

2. The second generation “2192” and “2194” will be content with wheels from 14 to 16 inches with the following characteristics:

  • “LZ*PCD” similar parameter (4*98);
  • width – from 5.5 to 6.5;
  • offset: 25 – 35;
  • the hole diameter is identical at 58.6 mm.

It should be remembered that correctly selected wheels will allow you to achieve traffic safety, moderate fuel consumption, and also increase the service life of the suspension.

General background information

Recommended size of tires and wheels for Lada Priora
Ranges of possible values ​​for tires and wheels for Lada Kalina Cross 2018.
Tires

Diameter15″–16″
Width (mm)195–205
Profile (%)45–55
The smallest size195/50 R15
The biggest size205/45 R16

Wheel disks

Diameter15″–16″
Width (inches)5.5–6.5
Reach (mm)33–35
Drills4×98
Photo
Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

  • On what roads will the car be primarily used?
  • Do you need increased cross-country ability?
  • How much of the route will be city roads and how much will be highways?
  • Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Lada Kalina Cross 2022?

3 types of rims:

  • Stamped (economical price category) - made from a sheet of iron by stamping on a press.
  • Light alloy - manufactured by casting (more reliable than stamped ones).
  • Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

  • deterioration of management;
  • uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

  • increased fuel consumption;
  • rapid wear of the outer tread segments;
  • the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Stamped and cast: which is better?

According to the production method, wheels for LADA Kalina are divided into two global categories: stamped (from steel sheet) and light alloy (forged, cast or combined).

For the first option, manufacturing involves welding individual structural elements of the product. The technology is simple, which has a positive effect on the cost of disks.

Among the advantages of “stampings” we note:

  • reliability;
  • maintainability (tendency to eliminate bent areas);
  • durability.

Negative aspects:

  • it is difficult to perform auto-balancing;
  • significant mass of products;
  • lack of design possibilities (same type);
  • low corrosion resistance.

Now let's touch on light alloy options. Such discs are more progressive products that are made from light metal alloys such as magnesium and aluminum, etc.

When choosing the kit you like, we recommend paying attention to the indication of the primary metal included in the material structure.

If magnesium dominates, then the discs are light in weight, but the strength properties of this option are far from ideal. Aluminum gives the product strength and fluidity. This translates into good resistance to cracking under impact loads. Wheel alignment will also likely be required.

Lada Granta overall dimensions

Lada Granta station wagon

Covers Lada Granta

To give preference to any of the above options, we recommend that you undertake an approximate analysis of the condition of the roads on which your LADA Kalina will travel in the future.

Advantages of "casting":

  • availability of a wide range of models;
  • light weight, which has a positive effect on handling and dynamics;
  • good dissipation of heat generated by brake units.

Models

175/70 R13

Tunga Zodiak 2

This model was released for the 2022 season, and it was created with an eye to Russian operating conditions.
The protector is made of 2 layers of rubber compound. The outer one has a special composition with increased wear resistance. And the internal one ensures driving efficiency due to the low level of hysteresis losses.

The center has 3 stiffening ribs, which guarantees good handling. And road traction is ensured by drainage grooves of a zigzag configuration.

Read more: Is the intersection with tram tracks a crossroads?

Price – 1,800 rub.

Dunlop SP Touring

These summer tires for the Lada Kalina have several undeniable advantages:

  1. Massive projector ribs that guarantee excellent road grip.
  2. Rigid shoulder areas distribute pressure evenly.
  3. Acute reaction to turning the steering wheel.
  4. High-quality drainage system with 4 drainage channels.
  5. The rubber mixture contains innovative polymers, which increases service life.

Price – 2,400 rubles.

175/65 R14

Cordiant Sport 2 PS501

These summer tires for Lada Kalina are suitable for those who prefer active driving. The advantages of such rubber are obvious:

  1. 2-layer projector.
  2. The presence of a wear indicator in the mixture.
  3. The special shape of the breaker increases the service life.

The outer layer is made of soft rubber, which allows you to partially level the road terrain. Inside there is a hard layer that ensures the strength of the frame. Asymmetrically shaped projector blocks and a drainage system allow you to feel confident in turns.

Price – 2,100 rub.

Pirelli Formula Energy

Usually, Pirelli tires for domestic cars are not purchased because of their price, but this model is a budget model in the company’s line.

It has an asymmetrical tread with 2 central ribs. The blocks have different configurations and sizes; there are large checkers in the shoulder areas. All this guarantees excellent grip both on a straight line and in corners. The presence of 3 longitudinal grooves prevents hydroplaning.

The background noise of these summer tires for Kalina is reduced. The weight of the tire itself has also been reduced by 10%.

Price – 2,600 rub.

185/65R15

Kumho KH27 Ecowing ES01

These are Korean tires from a prestigious brand, but in the budget segment.

Good acceleration, maneuvering and braking are guaranteed due to the symmetrical tread, both on dry and wet asphalt.

Even in the case of significant wear, the tires effectively prevent hydroplaning.

Uniform abrasion is ensured by the wide and flat design.

Longitudinal blocks in the projector, along with interspersed deep grooves, improve handling and enhance ride comfort. And background noise is reduced by thoughtful placement of ribs and blocks.

Price – 2,600 rub.

Select your year Kalina 1.6i 111x

The LADA Kalina 1.6i 111x model was produced from 2004 to 2012. Table of factory and suitable tire sizes for LADA Kalina 1.6i 111x.

Make model modification AutoYear of issueWidth, profile, tire radiustype of instalation
LADA Kalina 1.6i 111x2012175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2011175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2010175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2009175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2008175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2007175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2006175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2005175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable
LADA Kalina 1.6i 111x2004175/70 R13Factory
LADA Kalina 1.6i 111x175/65 R14Factory
LADA Kalina 1.6i 111x185/60 R14Acceptable
LADA Kalina 1.6i 111x185/55 R15Acceptable
LADA Kalina 1.6i 111x195/50 R15Acceptable

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Car modifications

Lada Kalina was produced for 14 years. The manufacturer offered the consumer two generations of small class cars.

First generation

The debut car of the Kalina family appeared at AvtoVAZ in 2004. It was released as a sedan. The first generation cars were equipped with 1.4 liter (89 hp) and 1.6 liter (81 and 98 hp) petrol engines. In 2006, Kalina hatchbacks appeared, the next year - station wagons, and a year later - a sports modification. Depending on the configuration, the car was equipped with ABS, electronic power steering, airbags, and an air conditioning system. During production, changes were constantly made to the equipment of the vehicle. In 2009 and 2011, Lada Kalina became one of the best-selling brands in the country.

Second generation

In 2013, the plant's conveyor belt was modernized to begin production of the next generation of cars. LADA Kalina 2 was produced in hatchback and station wagon bodies. It is characterized by a more modern appearance, better aerodynamics and increased comfort. Improved powertrain, suspension and gearbox are distinctive features of the vehicle compared to previous generation models. Both hatchbacks and station wagons were equipped with 1.6 liter engines with variable intake, the power of which varied between 87...106 hp. A manual or automatic transmission was installed.

The maximum configuration included the installation of anti-lock systems, stability control, air conditioning and navigation, a traction control module, an after-braking system, a passenger airbag, a touch screen, heated front seats, a rain sensor, etc.

The latest modification of the Kalina family is the Lada Kalina Cross. It is distinguished by increased ground clearance, a modified final drive ratio and a more aesthetic appearance, for example, due to decorative trims on the wheel arches and sills.

In 2022, production of Kalina family cars was discontinued.

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]