VAZ 2109 door lock adjustment after repair work

VAZ 2109 door adjustment

VAZ 2109 door adjustment - this procedure is sometimes very important and the motorist must be able to handle this matter independently. On a VAZ 2109, door adjustment is often necessary after the car gets into an accident, as a result of which the factory settings are shifted. It also happens that the owner decides to replace a door damaged during an accident, but the new one will not fit into place without gaps and distortions. In this case, proper door adjustment will help fix everything.

VAZ 2109: adjusting the doors yourself

VAZ 2109 door adjustment
VAZ 2109 door adjustment - this procedure is sometimes very important and the motorist must be able to handle this matter independently. On a VAZ 2109, door adjustment is often necessary after the car gets into an accident, as a result of which the factory settings are shifted. It also happens that the owner decides to replace a door damaged during an accident, but the new one will not fit into place without gaps and distortions. In this case, proper door adjustment will help fix everything.

Trunk door

If the trunk opens with force, you need to loosen the lock on the trunk body, move the plate out a little, and check the result. If the result is obtained, the adjustment is completed and the bolts should be tightened until they stop. When the lock knocks during closing, you need to mark the lock tongue and the latch, check how much the mating parts are displaced.

Using the same mounting bolts, loosen the plate and move it to the right or left according to the measurement result. For normal operation of the VAZ 2109 trunk, the lock adjustment is considered complete if the lid opens easily and is in its place. If suddenly the trunk begins to open on bumps, you should check the condition of the lock tongue and the depth of its insertion into the latch.

How to adjust the front doors

Front left door lock VAZ 2104: 1 - internal lock drive lever; 2 — spring of the locking lever; 3 — external drive lever; 4 — lock switch rod; 5 — rod of the lock lock button; 6 — bracket; 7 — lock button; 8 — external drive rod; 9 — external handle of the lock; 10 — lock switch; 11 — cracker spring; 12 — retainer block; 13 — lock rotor; 14 — external drive rod; 15 — lock retainer body; 16 — lock ratchet; 17 — spring of the central roller; 18 — lock release roller; 19 — central roller; 20 — locking lever; 21 — rod of the internal drive of the lock

On the “nine” body, a special latch is installed in the doorway, which is responsible for the correct closing of the doors and regulation of the gaps when closing them. Changing the position of the latch can greatly affect how the door closes and what gaps there will be. Before starting the adjustment, the door is opened and the lock is loosened. There is no need to unscrew the bolts all the way. It is enough that the latch begins to move freely relative to the body.

Listed below are all the problems with the door and how to fix them.

• The door closes very tightly. The clamp must be moved outward and the fastening bolts must be tightened. Continue this procedure until the door begins to close properly.
• If the door closes too weakly, then you need to do the opposite - push the latch inward and tighten it.
• In the case when the door goes down or up when closing, the latch needs to be raised or lowered accordingly.
• Sagging doors can be eliminated by tightening the lower hinges or installing spacers under them. It is advisable to make gaskets from a rigid material to prevent further deformation of the gasket and repeated sagging.

Adjustment

The door of the VAZ 2109 is hanging

To adjust the doors on the “nine” you need to have only two tools with you:

• A good screwdriver;
• Hammer.

Front doors

On the “nine” the front doors are adjusted as follows:

• The position of the latch changes;
• Before carrying out this procedure, you need to carefully outline the contours of the latch on the stand;
• If the front door of the “nine” closes too tightly, then you need to loosen the bolts of the clamp, move it a little outward, and then tighten the screws thoroughly;
• If the front door closes poorly, then the latch must be pushed inward.

Note. During the operation, care must be taken to ensure that the door does not sink or protrude relative to the body.

• If the door drops below the level when closing, then the latch must be raised;
• If the door rises when closing, but sags in the open position, the latch must be lowered.

Note. To ensure that the adjustment of the latch is not disrupted in the future, it is reasonable to install a gasket under it. It is better that it is not rubber, but waterproof sandpaper. The gasket will help fix the distance of the latch from the post so that the pin of the mechanism does not touch the cover of the external lock.

• If you need to adjust the inner handle of the lock, you should move the bracket under the fastening screws. There are oval holes on the inner panel of the door that will help in this matter;
• If the internal handle does not cope with its duties and the door does not open well, then the bracket bolts are loosened, the handle is moved to the desired position, and the screws are tightened.

Silent locks and their installation

Silent locks for "nine"

Adjusting the doors also means upgrading the locks, which do not make a very pleasant sound. It's not even a sound, but a loud, unpleasant metallic clang. It turns out that it's all about the design of the door locks. So, on the “Nine” and other cars of the AvtoVAZ family of previous years, the lock is fixed on the outside of the door. As a result, all parts that come into contact with the lock are bare metal, which makes such unpleasant sounds.

Note. For example, Priora and Kalina cars use a different design of door locks. They are hidden inside the door, and the locking tongue of the lock is covered with a special wear-resistant material, like polyurethane.

Opening locks. Elektrostal. | Topic author: Elektrostal.

If you have lost your key, the key is broken, the lock is jammed or the door is slammed, our locksmiths will help you open the lock quickly, accurately and without damage!

If necessary, we can repair, install or replace locks.

We will also help you open a car (of any brand), open a garage, open a safe, etc. We work around the clock. Write down and save phone numbers. ===================================== 8 *** antizamok.ru #Moscow #open #lock # door #car #safe

how to open the door on a VAZ 21099 | Forum VAZ 2108, 2109, 21099, 2113.

4 Apr. 2013 - When I was sitting in the car, I closed the door with the button, after I raised the button the door did not. how to open the door on a VAZ 21099. 1994 The inside of the lock is most likely due for replacement. . And if you pull the handle from the interior when it is closed with a button, it stops again. Car: 2109 1.5 1994

DOOR WILL NOT OPEN VAZ 21099 - YouTube

. #AvtoDrive - VAZ 21099 DOOR does not open - By . How to open a car door lock without a key (VAZ-2109).

Which LCD screen is suitable for Peugeot 407

Where is the cigarette lighter fuse on Opel Astra N

How much will it cost to sort out the chassis of a VAZ 2109

How to open a door if the VAZ 2109 lock is broken: comments

I agree, this is fun information.

Please tell me more..

Just what you need. Interesting topic, I will participate. I know that together we can come to the right answer.

Replacing the rear door lock

The process begins with unwinding the door card trim. Following are the instructions:

1. Dismantling the plugs, the internal handle: the latches are unfastened, the screws are unscrewed.
2. The decorative panel opens, but not all the way. After the electrical wiring is disconnected, the facing fragment can be removed completely.
3. The rod is detached from the closing device.
4. The bracket, retainer, and left internal screw are removed.
5. The lock washer is removed and the liftback is turned off.

When the cylinder is untwisted, it will become clear: lubrication, replacement of parts, the core or the entire lock is required. After removal, the driver can install a new part. To change the lock completely, the retaining bolts are unscrewed. Installation of another mechanism is carried out in a similar manner.

If desired, you can remake the device. For example, to assemble one new one from two old ones.

Why doesn't the door open from the inside or outside?

The reasons why the car door does not open from the inside and outside (VAZ-2114, 15,12,11) can be different:

• wear of some parts responsible for traction inside the latch;
• Wetting of the lock or icing of parts of the lock due to frost;
• presence of a foreign object inside;
• The battery is completely discharged when the baby shutter is on.

First, the unlocking mechanism begins to jam when pressed too sharply or too smoothly. And one day the day comes when the door in your VAZ-2115 or 2112 car will stop opening both from the inside and from the outside.

How to open

If you are inside the car and the door is jammed, you can get out of the car and then try to open the lock yourself from the outside.

When this cannot be done from the outside (for example, in a situation where the owner has forgotten the keys in the car), then you can use different methods: from adequate, gentle to aggressive, radical - even knocking out the rear window.

If the car window is open a few centimeters, then it is easy to pry up the handle, which is fixed in a certain position, then pull it back using a regular rope or strong fishing line.

Another option is what to do if the car door does not open from the outside VAZ-2114, 2115,2112, 2111

How to open a jammed door from the inside

If you are inside the car, but are unable to exit through another door, you can use one of the alternative opening options:

• If the door does not slam completely shut, try to get to the locking mechanism using a metal ruler or a strong, long wire.
• If it closes all the way, press the inside and outside handles simultaneously or alternately, trying to push the door out from the inside.
• The last option involves outside help. Try opening the door from both sides by pushing down on it, pressing on the door lock, using a metal ruler.

Installation of silent locks

Locks for "nine" doors, as a rule, are distinguished by a specific sound when opening and closing. The problem is in the design of the lock - the completely metal structure, which is also fixed on the outside of the door, makes an unpleasant clanging sound when opening and closing. It is impossible to open or close such a lock silently. The situation can be corrected by installing improved locks, the locking tongue of which is coated with a durable and wear-resistant polymer. By the way, these were the first to be installed en masse on VAZ cars on Lada Priora and Lada Kalina. But owners of “nines” who want comfort in this matter will have to take care of the silent lock themselves.

Hood adjustment

To adjust the hood cover, it is necessary to adjust the height of the pin in relation to the radiator and fenders (front) of the car. It is the pin with the spring system that holds the hood closed. Cups are often installed on the pin, connected by a spring, and the pin itself is held in place by a locknut on the hood lid. Therefore, to adjust, the bolts holding the hinges should be loosened, the position of the hood lid should be changed so that there are no gaps between the body and the lid, and the hinges should be tightened again.

If there are problems with closing the hood lid, the pin mount itself must be moved so that it coincides with the lock socket, or the lock itself must be moved.

VAZ 2109: door lock jammed - how to fix it

VAZ 21093 door lock

VAZ 2109 door locks are designed to protect vehicles. Not only the safety of the car depends on how reliably they work, but also the confidence of its owner that everything will remain in place in the absence of the owner. The article suggests getting acquainted with the issue of repairing a device with your own hands if it jams.

Tools

To adjust the fit of the doors in the VAZ-2109, you will need only 2 tools - a hammer and a screwdriver.

Front doors

You can put them in the correct position by changing the position of the latch. You can do this as follows:

1. Before making adjustments, pay attention to the original position of the latch. It is best to do this with a marker.
2. If the door travel is too small to close, you need to loosen the latch, move it outward a few millimeters and then tighten the fastening bolts.
3. In case of a loose fit, the latch, on the contrary, should be “recessed” a little.
4. When the door moves vertically, depending on whether it is down or above level, we adjust the lock according to the problem. That is, if the door has dropped, pull the latch up and, if there is free space in the threshold, move the latch slightly.

Tip: when adjusting the door, make sure that it does not sag or protrude, but is exactly at the level of the body.

Rear doors

If the rear doors of the VAZ-2109 are loose, the problem can be solved as follows:

The hinges holding the rear door of the car should be loosened, and then, after placing it in the correct position, tighten the door clasps.

Recommendation: In order to accurately determine how much the rear door hinge has moved during the adjustment process, before starting work, as in the case of adjusting the front doors, trace the brackets along the contour with a marker.

You can check how far the door has dropped as follows: Open the car door slightly and load it with a gradually increasing load from 0 to 100 kg and vice versa.

"Nine" and the door lock device

Theoretically, the lock mechanism can be divided into 3 parts: a handle with a cylinder and a button, the main mechanism, and the inner door handle. All nodes and connections between them are shown in the diagram.

The node labeled “2” looks like this.

4 rods fit to it, that is, to this node. Two of them are connected to the external handle, and in order to dismantle it, the rods are disconnected.

If there is no electrical wiring inside the door, you do not need to disconnect the battery before performing repairs.

In other cases, that is, when power windows or locks are installed, the battery must be disconnected. To do this, as many people know, it is enough to remove the “negative” terminal. This means that before repairing locks, the hood is opened first, not the doors. Anyone who violates such a requirement will, at best, have to change burnt fuses.

Adjusting locks on VAZ 2101-VAZ 2107

First, draw a line next to the clamp with a marker: when the bolts are loosened, you will know in what position the clamp was.

Loosen the bolts (indicated by the arrow) that go under the wrench or perhaps even the hex key. Then move the latch to a position where the door closes well and stays on the move. Wrap them all the way, taking into account the gaps at the doors. Be sure to ensure that the gaps are even and that the hinges do not dangle or play.