About the wheel bolt pattern parameters on Hyundai

Production of the popular model of the Korean brand Hyundai Solaris started in the Leningrad region in a joint venture in 2011. Over the 7 years of the brand’s existence, the company carried out 1 restyling and a complete generation change in 2014. Sales of the brand, due to the ideal price-quality ratio, as well as due to the versatility of using many spare parts from domestic cars, are constantly growing year after year. With an increase in demand for a particular vehicle model, the need for service and replacement of consumables, which include wheels and tires, invariably arises.

Selection of disks

The manufacturer allows the use of disks of different sizes. This parameter may depend on the vehicle configuration. When choosing this design, first of all, pay attention to the material that was used to make the product:

• Standard stamped steel cannot boast of an aesthetic appearance, but is famous for its durability and strength. This is an inexpensive option that suits many car enthusiasts. Can be supplemented with plastic caps.
• Forged light alloy is an expensive option, characterized by a large margin of strength and an impressive appearance.
• Light alloy cast can be both affordable and very expensive. The upper cost threshold is limited only by your budget. Such discs can have an unusual design and high strength.

When choosing a disk, you need to consider the following parameters:

• landing width;
• departure;
• number of wheel bolts and spacing between them;
• landing diameter.

This is interesting: How to find out the year of manufacture of a Bridgestone tire

Features of the bolt pattern

If you do not want to install branded wheels on the Hyundai Solaris, then you need to focus on the bolt pattern for the R15:

• 6 inches – landing width;
• 48 – departure;
• location of fasteners 4x100;
• The landing dimensions of the central hole are 54.1 millimeters.

If, according to the documentation, you have R16 wheels installed, then only the offset value will change - 52. The remaining parameters are similar. It is not difficult to select disks to the described sizes; many manufacturers have suitable models.

Standard tire sizes for Solaris:

• 185/65/R15;
• 195/55/R16.

Sometimes manufacturers encode technical characteristics into codes. For example, you may come across this option: 4/112 ET48. It means that the wheel is secured with 4 bolts with a length of 112 millimeters, and the disc offset is 48.

When purchasing tires and wheels, do not try to save money. At best, an unsuitable wheel model will not fit on your car, and at worst, it will cause a lot of problems while driving. It is better to spend a little time to choose an option that is suitable for the bolt pattern than to later invest in car repairs, and possibly in your health.

Maximum and minimum possible parameters of non-standard disks

The rim width, offset and drilling for a non-standard disk must correspond to the factory values.

If the PCD value differs by millimeters, the wheel will not sit completely on the hub - one nut will be tightened well, and the rest will be either overtightened or undertightened. This is fraught with “beating” of the disk, and loosely tightened nuts can be unscrewed while moving. A reduced offset value will lead to overload of the suspension and hub bearings, and an increased value will result in the disc touching the elements of the vehicle’s braking system.

As for the hub diameter, it must be observed for stamped discs. You can install alloy wheels with a large DIA value on your car by using a special spacer ring made of metal or plastic.

But the diameter of the disk may be larger. Only as the wheel size increases should the tire profile decrease. Yes, with larger diameter wheels the speed will increase, the handling in corners will be better, and the ground clearance will be greater. But at the same time, the car will accelerate and brake more slowly, and there will be less driving comfort, since a thinner tire will absorb shock loads worse than that recommended by the manufacturer.

You need to install new tires not only before winter or summer. They can change the functionality of the car and its appearance for the better. In order not to violate the safety requirements stated by the manufacturer, it is necessary to take into account the bolt pattern of the Hyundai Solaris.

Standard wheel sizes for Hyundai Solaris 1.6i I

The Hyundai Solaris 1.6i I model was produced from 2011 to 2014. Table of standard and suitable wheel sizes for Hyundai Solaris 1.6i I.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

How to choose wheels for Solaris

While you need to replace the wheels, you can take your time to get tires first; you will always have time to buy Toyo tires. The accuracy and compliance of wheel components will ensure reliable driving and help avoid premature wear.

The disks on the Hyundai Solaris are mounted on four bolts located along a 100 mm circumference (PCD), the mounting width of the disk can be 5.5 inches with a 15-inch diameter of the landing rim or 6 inches with both 15 and 16 inches of landing diameter, with disc offset in the range of 46-52 mm. When choosing the size of wheels for Solaris, first of all, focus on the engine modification and year of manufacture of your car.

Disk parameters on Solaris

To replace a Hyundai Solaris, we recommend buying Replica wheels that will exactly match all the parameters of this car.

The table below shows the most suitable models of this brand, which have a constant number of bolts (4 pieces), diameter of their centers (PCD=100 mm), hole diameter for the hub (DIA=54.1) and mounting diameter (15 inches).

Also, depending on the required landing width of the disk and its offset, you can choose your Replica for your Solaris.

Which wheels to choose for Solaris

In addition to the Replica, KiK wheels fit well on the Hyundai Solaris with the same Pirelli tires. Models KC488 “Black Platinum” and KS582 “Black Diamond” will perfectly replace 6.0×15 wheels with a 54.1 mm hub hole and 48 mm offset, as well as KC445Silver with 39 mm ET and DIA56.6 mm.

Discs with a width of 5.5 and a diameter of 15 inches can be replaced with KS427 Silver with an offset of 48 mm and a centering hole diameter of 60.1 mm.

Source: https://pieman.ru/kak_vibratj_diski_na_solyaris

Answers (6)

Follow the answers to this question

• 4X100 like Kia Rio

  freelance Automotive enthusiast

  12/23/2013 at 17:39

• Standard dimensions: R15: Wheel width 6″ Offset 48 Center hole 54.1 Bolts 4X100

  R16: the same, only offset 52

  Alexey Shumsky Amateur

  01/27/2014 at 23:25

• standard tire parameters: 185 / 65 / R15 195 / 55 / R16

  wheelman I know everything about tires and wheels

  04.11.2016 at 23:43

  Read also:  Lambda probe VAZ 2110: test for functionality and do-it-yourself replacement
• WILL WHEELS FROM LARGUS FIT SOLARIS???

  Victor Telitsyn Newbie

  01/27/2017 at 22:09

• Will 195/50/16 fit with an accent?

  Yulia Bankina (Suprunova) Newbie

  03/30/2017 at 23:54

  suitable if the disks have the parameters described above! well, the 50th height is a little small, that is, a little higher would be 195 55 16, but yours will do too

  freelance Automotive enthusiast

  03/31/2017 at 00:16

Similar questions

Alexander Kirillov

Hyundai Solaris Lada Vesta

conclusions

As can be seen from the article, tires and wheels with dimensions 1 75/70 R14, 185/65 R14, 195/55 R15 .

But the wheel bolt pattern is as follows: 14 / 5.5J PCD 4×114.3 ET 44 CO 56.5, 15 / 6.0J PCD 4×114.3 ET 44 CO 56.5 . But, for those who like alternative options for installing wheel rims, there is also a fairly wide selection of parameters.

Factory wheel sizes for Hyundai Solaris:

The rim diameter is the seat size of the wheel in inches. By the way, the abbreviation R15 is not the 15th radius of the disk. 15 is its diameter in inches, and the letter R is generally a tire characteristic for this rim. It indicates the radial arrangement of the cord threads in the frame.

The diameter of the wheels for Solaris is 14, 15, 16 and 17 inches. 14-inch wheels were installed at the factory on all first-generation models.

Starting with the restyled models of 2014-2017, there are three sizes of wheels - 15.16 and 17 inches. Accordingly, the tire size for a 15-inch wheel is 185/65 R15, and for a 16-inch wheel it is 195/55 R16. 17-inch wheels should have 205/45 R17 tires.

The Hyundai Solaris II already uses two types of wheels - 15 and 16 inches. The factory equipment of 2022 cars includes stamped 6Jx15 ET46 wheels.

• Rim width

The width of the rim is designated as 5.5 J, where the number is the value in inches. The letter J near the diameter is a characteristic of the shape of the edges of the disk, which is incomprehensible to the average consumer and not particularly necessary.

The width of the wheels on Solaris is 5.5, 6 and 6.5 inches. All three sizes were used in the first generation models of 2011-2014. The restyled Solaris 2014-2017 come with 6- and 6.5-inch wide wheels. Solaris II cars produced from 2022 to the present are equipped with 6-inch wheels.

• Departure

The abbreviation for departure is ET. Disc offset for Solaris vehicles is positive. Offset values ​​for discs of different sizes are 43, 46.48, 49 and 52 mm.

The ET43 value was average exclusively for R14 wheels - the offset range varied from 35 to 45 mm. Moreover, for R16 and R17 the same offset value was strict, not a millimeter more or less.

An offset of 46 and 48 mm is typical for cars with R15 wheels, and 49 and 52 mm are the characteristics of R16 diameter wheels.

The first restyled models from 2014-2017 had wheels with offsets of 48 and 52 mm. On modern disks, which have been equipped with Solaris since 2022, the offset is 46 and 49.

Decoding disk markings

For example, R17 4×100 5.5J ET46

• PCD (Pitch Circle Diameter) diameter of the center circle of the mounting holes: 87 mm;
• Disk radius at 17;
• Drilling: number of holes 4;
• Fastening type: M10 – stud diameter;
• Thread size (pitch): 1.25;
• Center hole diameter: 57 mm;
• Pressure (front / rear): 2.0 / 2.1 bar.

The PCD value is calculated by the distance between the centers of opposite holes. We measure with a ruler, but do not dismantle the wheel. For four bolt construction, the PCD corresponds to the actual distance.

Rim offset is indicated by “ET”, the unit of measurement is millimeters. This is the distance between the point of contact between the disc and the hub and the middle of the rim width.

In different countries the designation is different: DEPORT, OFFSET. The offset is positive if the plane does not extend beyond the point of contact, otherwise the offset is negative.

The further the rim is from the body, the more the offset tends to zero.

• D is the diameter of the central hole, measured in millimeters.
• J, H and subsequent alphabetical symbols indicate the markings of the humps on the rim flange. Symmetrical, asymmetrical and combined.
• The “Hump” is a protrusion on the rim for a tubeless tire. When moving, the “rails” hold the tire beads, preventing depressurization.

Numerical characters indicate the release date, month, year.

• TUV is an abbreviation for the regulatory authority for compliance with quality standards.

Maximum wheel load: the unit of measurement depends on the country of manufacture of the rubber and rim.

This is interesting: Why do you need wheel balancing?

What is the effect of installing non-standard dimensions on the Hyundai Solaris?

The size of wheels, tires, disks that are installed on a car have a direct impact on its technical characteristics. In the instruction manual, the manufacturer indicates recommended and acceptable sizes.

The owner of a Hyundai Solaris independently decides what type and size of wheels and tires to install. For a driver who uses the car as a means of transportation, the factory rim sizes are more than enough.

In case of tuning, changes in standard characteristics, dynamic indicators, it is necessary to refit the car with non-standard wheel sizes.

List of characteristics that can be changed by installing non-standard wheel sizes:

• Controllability;
• Road grip;
• Sharp and responsive steering wheel;
• Reduced (increased) aquaplaning;
• Comfort of movement;
• Noise level;
• Combined cycle fuel consumption;
• Tread wear rate.

Parameters of standard nuts

Wheels for Hyundai Solaris cars produced between 2011 and 2022 were fastened with standard M12x1.5 nuts. The thread diameter of the nuts is 12 mm, and the thread pitch is 1.5 mm. Tightening torque – 88-107 Nm. Material – steel coated with chrome and zinc.

The original stamped wheels have open-type cone nuts 34 mm long. For non-original casting, it is recommended to install nuts 34-40 mm long, since cast wheels are thicker than stamped ones. For this reason, it is better not to place nuts from stamped wheels on alloy wheels - the engagement of the threaded connection will be insufficient for their reliable fastening.

Recommendations for disc care

• Check the geometry and wheel balancing on a special diagnostic stand. If deviations are detected, restore the integrity of the structure at a service station. It is impossible to “reanimate” the disk on your own due to the lack of necessary equipment;
• Immediately contact a service station for preventive maintenance if you find cracks or dents on the rim;
• Avoid getting into potholes, especially at high and medium speeds. The disk will be deformed, the seal will be broken, regardless of the material of manufacture;
• Monitor the tire pressure; it should not differ from that recommended by the manufacturer. If there is a deviation, pump it up yourself, contact the service station;
• Observe the transition to summer and winter modes. In summer, the tire pressure is 0.15 atm higher, in winter it is lower by the same amount. The parameters are specified in the vehicle operating instructions;
• Tighten the rim nuts with a torque wrench. Excessive tightening contributes to the breakage of the studs, weak - to the unscrewing of the wheel and a collision on the road.

In sunny weather, cast aluminum wheels are least susceptible to external damage. But in slush, ice, when the road is strewn with various chemicals, the rim is susceptible to corrosion. This provokes paint peeling and destruction of the molecular composition.

Wash your wheels as they get dirty. Since it is unlikely that you can clean it properly with a rag, use high-pressure compressors. Equipment of this class is available at many service stations, workshops, and service centers.

Systematic polishing allows you to get rid of scratches and burrs. First clean the wheel from dirt, dry it thoroughly, and then treat it with a chemical. Wipe several times with a microfiber cloth.

Store wheels in a hanging position, do not stack them on top of each other. Clean off any dirt, dry, and wrap in cellophane. Some motorists practice applying an aerosol to the surface before preservation. However, this is a purely personal decision of the owner.

The average service life of original wheels is 150 – 180 thousand km. Subject to a moderate driving style, the replacement interval will increase by a third. The service life of tires is half as long as disks.

Winter tires for Hyundai Accent and Solaris 2011

On a note.

It must be said that any automobile concern always releases the next modification of the vehicle from the assembly line with tires already installed that are compatible with rims of the above dimensions.

However, this wheel is most often a summer one, and when cold weather sets in, most Russian drivers, fearing deterioration in the controllability of their “iron horse,” traditionally search for and buy winter tires.

Most car enthusiasts invariably purchase studded tires. This is not at all necessary when driving a car in the city, because the friction properties of the sharp lamellas of modern studless tires work even better than treads with metal pointed studs. For the most popular Hyundai models, the most popular are the following winter tire options, compatible with the wheel bolt pattern of the Hyundai Accent:

• For the Accent model, the manufacturer installs tires with the following size parameters, depending on the model’s configuration.

The most budget cars are equipped with tires with a size of 185/65/R15, which is convenient when driving in winter, because the high profile guarantees shock absorption due to the air buffer.

It also provides additional traction on loose snow, not only under the treaded outsole, but also along the side of the wheel.

Modifications in the mid-price category come off the assembly line with tires already installed on the wheels, having dimensions of 195/55/R16. Such characteristics are ideally suited for both winter and summer driving around the city or on less snowy roads outside the city. Drivers of such cars often use all-season tires for their “iron horses,” which saves them from periodically changing shoes twice a year.

You might be interested in this About Alutec wheel rims for a car

Tucson bolt pattern

Top variants of the Accent have the same bolt pattern as the Getz and are equipped with tires with parameters 205/45/R17, which have a wide grip surface. At the same time, it has a too small profile, which complicates safe driving around the city in winter.

On a note.

Car enthusiasts should take into account that the speed and load indices for the Hyundai Accent must be at least 88N, that is, each tire in an inflated state must normally withstand a load of 560 kg and drive in this state at a maximum speed of at least 210 km/h for 30 minutes. The Hyundai Getz has the same characteristics, the wheel size of which allows drivers to install tires from this already quite outdated model of the Korean brand.

• The analogue of the above model - Solaris - has very similar parameters, being, in fact, a classmate of the Accent, which is why its tires and parameters recommended by experts have almost the same characteristics.

Unlike the previous model, the Solaris tire size starts at 175/70/R14. Together with 185/65/R15, as well as for the Accent, it is very convenient for use in winter.

With a landing diameter of 16 inches, the model is equipped with two main dimensions - 195/50/R14 and 195/55/R14. Only the last of them is suitable for all-season tires due to its fairly high sidewall.

Wheels for Elantra

Other parameters, such as the maximum permissible tire size for premium equipment, as well as load and speed indicators, completely repeat the same characteristics for the Hyundai Accent.

Important!

Considering the full compatibility of Accent and Solaris in terms of matching wheelbase dimensions and all dimensional characteristics of wheel arches, the wheels and tires for these cars are interchangeable. The bolt pattern of the Hyundai Getz wheels, the size of the Solaris and Accent tires are identical, and drivers can always reinstall the wheels from one model to another if the need arises.

The bolt pattern of the Hyundai Solaris, as well as other Hyundai cars, can be easily classified into groups by class, within which these parameters coincide in 90% of cases. This makes it possible for car enthusiasts to choose wheels both from an official dealer and at other specialized sales points, practically without noticing that they belong to a particular model of a given brand.

General background information

Ranges of possible values ​​for tires and wheels Hyundai Solaris 2012.

Tires

Wheel disks

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Hyundai Solaris 2012?

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

Wheel looseness

Different wheels have been used on Hyundai Solaris in different generations. Usually this information is indicated in the service book or technical documents of the car. Also, on each vehicle there is a sign that says which wheels and tires are suitable.

Wheel bolt pattern of Hyundai Solaris.

Characteristics

Let's look at the wheel bolt pattern for the Hyundai Solaris according to the manufacturer's data by year of manufacture and generation:

Hyundai Solaris disk parameters:

PCD 4×100 with diameter from 15 to 16, width from 5.5J to 6J, offset from 46 to 52. Similar parameters to Hyundai Solaris Sedan (RB) 1.6 CRDI 2022. Tire size from 15 to 16, width from 185 to 195 and profile from 55 to 65. Minimum tire size: 195/55R16, maximum: 185/65R15.

Alloy wheel rim.

Hyundai Solaris Sedan (RB) wheel parameters:

PCD 4×100 with a diameter of 15, a width of 6J, an offset of 48. Similar parameters to the Kia Rio III (UB) 1.4 CRDi 2022. Tire sizes from 15 to 15, width from 185 to 185 and profile from 65 to 65.

What wheels were installed on different car bodies and configurations?

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Since its inception, the Hyundai Solaris has had two body styles - a sedan and a five-liter hatchback with 1.4 liter engines producing 106 hp. and 1.6 liters for 121 hp. From 2022, the sedan body type receives the HCR label, and the hatchback is no longer produced.

The entire model range is divided into three groups - the first generation (2011-2014), restyling I (2014-2017) and restyling II (from 2017 to the present). Each subtype had its own standard size.