About wheel bolt pattern on Daewoo Nexia

Characteristics and parameters

To select high-quality wheels for the Daewoo Nexia, you need to know such parameters as the bolt pattern and the dimensions of the mounting holes. Having such information, there will be no problems with selection and purchase.

Before purchasing, it is also advisable to consult with the seller about the chosen model. It is possible that some wheels do not perform well during operation.

When choosing rims, you need to consider whether tires of similar sizes are common.

The larger the wheel size installed on the car, the better the quality of control and behavior on the road. But you should also take into account the increased wear rate of suspension parts and the decreased level of driving comfort. The larger the size of the wheels themselves, the lower the profile of the tires themselves must be chosen. This will also not have the best effect on the wear of the wheels themselves, since the level of load on them will increase.

For the winter season, 14-inch wheels are most suitable for the Daewoo Nexia. They will give the car optimal performance in poor operating conditions and on rough roads.

In summer, it is recommended to install wheels with a radius of 15 inches for maximum traction and best handling.

Tire parameters for Daewoo Nexia 2011:

• diameter (measured in inches) - from 14 to 16;
• width (millimeters) - from 185 to 215;
• tire profile (%): from 40 to 60;
• minimum tire size - 185/60 R14;
• maximum tire size is 215/40 R16.

You may be interested in this About stamped R17 rims

Disc parameters for Daewoo Nexia 2011:

• drilling (often referred to as bolting) - 4×100;
• diameter (measured in inches) - from 14 to 16;
• width (inches) - from 5.5 to 7;
• wheel offset ET (millimeters) - from 45 to 49;
• diameter of the central hole (DIA) - 56.6.

Disk parameters for Nexia

General background information

Ranges of possible values ​​for tires and wheels Daewoo Nexia 2012.

Tires

Wheel disks

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Daewoo Nexia 2012?

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is disc bolt pattern?

The bolt pattern determines whether the disc can be installed on a car.

Each wheel rim is characterized by a mass of geometric values, which many have no idea about. In vain, because it is absolutely not enough to know the number of holes for bolts and the diameter of the disk. A bunch of other parameters affect both safety and the service life of the car’s chassis, suspension and tires. And here every fraction of a millimeter is important.

Disc bolt pattern is a set of parameters that are arranged into a single geometric model that is either suitable for a particular car or unacceptable for use on it.

Basic parameters of the wheel rim.

1. The seat width of the wheel is measured in inches.
2. Landing diameter. Also measured in inches.
3. The distance from the mounting surface of the disk to the center of the tire. Designated ET.
4. The number of holes for fasteners and the diameter at which their centers are located. Most often, this parameter is called a bolt pattern, but this is not entirely true. The parameter is designated as Pitch Circle Diameter or PCD.
5. The diameter of the disk mounting hole, the one that fits on the hub. It is designated DIA and measured in millimeters.

The PCD parameter depends on the distance between the centers of adjacent holes and on their number.

What kind of chatter does the Daewoo Nexia have?

To understand this whole geometric compote, let’s look at examples with disks for Nexia. As a rule, Nexias of different years of production are equipped with wheels with a diameter of 13 and 14 inches. Here are their parameters:

Stamped standard 13-inch wheel for Nexia.

Now the markings of a standard Nexia disk become clear:

1. 13 and 14 are the diameter of the disc, measured in inches.
2. 5.5J (5J) or simply 5.5(5) is the width of the rim in inches.
3. PCD 4x100 - four holes, the centers of which are located along a diameter of 100 mm.
4. ET 49 - the distance from the mounting surface of the disk to the center of the tire is 49 millimeters.
5. The landing diameter of the hub hole is 56.6 mm.

A set of 14-inch wheels for the Daewoo Nexia with a standard bolt pattern.

Alternative options

It is clear that the ride on such wheels will not be comfortable, but it looks very impressive. Note that in any case the PCD and DIA parameters remain unchanged. The issue with offset is complicated, since the parameter cannot but take into account the width of the disk. If the offset is too large with a large diameter and large width, the rubber will inevitably reach the fender liners and wheel arches. And vice versa - if the offset is insufficient, but the wheels are wide and large in diameter, when turning we will scratch the tires against the suspension parts.

Proven replacements

Alloy wheel for Daewoo Nexia GM12 (copy of the original disk).

Proven options for replacing factory disks:

• 6Jx14 4x100 ET45;
• 6Jx15 4x100 ET45;
• 5Jx15 4x100 ET45;
• 5Jx16 4x100 ET45;
• 7Jx15 4x100 ET45;
• 7Jx16 4x100 ET45.

Naturally, the landing hub diameter DIA remains stable for everyone - ET 56.6.

Theoretically, it is possible to install disks of a different bolt pattern using adapters, but is it worth doing?

How is the wheel bolt pattern measured on Daewoo cars?

When you have to select and purchase new wheels for the Nexia, you need to know the drilling parameters on the car in advance. The most accessible way to determine it for any car brand is to use a special table that can be found on the Internet. It contains, depending on the year of manufacture and engine size, all the necessary parameters and dimensions.

The third method is the least accurate and most labor-intensive. In this case, you can independently measure all the required dimensions. To determine the bolt pattern depending on the number of fasteners, you will need to apply the following formulas:

• B=A×1.155 - used for three holes;
• B=A×1.414 - calculated for four holes;
• B=A×1.701 - for five holes.

Having received the value of the required value, you can easily calculate the required diameter size, which is designated as B.

Daewoo Nexia car with alloy wheels

Replacing the wheel bearing of Daewoo Nexia: how to understand that it is required?

To find out whether the front wheel bearing of the Daewoo Nexia requires repair and replacement, you need to do the following:

1. Raise the desired side with a jack;
2. Hold the wheel with both hands and check the play.

If there is free play, the problem must be corrected. In the factory, everything is securely fixed with rings on both sides in the grooves of the body and therefore the hub must be stationary. Another sign of the need for replacement is that the hum disappears/appears when turning. For example, if the noise disappears for a short time when turning right, then the problem is on the left side, and vice versa.

What are they made of?

The easiest way to buy cast alloy wheels in Moscow. They are made from a special alloy based on aluminum and additional additives. The product is poured under high pressure, polished, and brought to high aesthetic standards. If you follow the rules for their use, such wheels will last for several seasons of active daily driving on not the best roads. The price of such disks depends on various parameters. But any owner of Daewoo Nexia will find a favorable price for themselves.

There are also forged wheels. They are much more expensive because they are made using a different technology. At the same time, their durability is much higher. But often they need to be ordered separately. They are quite difficult to find in mass sales.

General background information

Ranges of possible values ​​for tires and wheels of Daewoo Nexia 2006.

Tires

Wheel disks

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Daewoo Nexia 2006?

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

The main differences between stamped and cast wheels for Matiz

The difference between stamped and cast car wheels Stamped designs have gained popularity not only because of their affordable cost, but also for their qualities.

Before releasing their own products for sale, engineers conduct numerous studies.

The laboratory tests the strength of the product, reaction to impacts, endurance, test drive. Taking into account all these details, the manufacturer of Daewoo Matiz guarantees car owners of this brand a high level of safety.

You may be interested in About wheel caps for VAZ: original for alloy wheels

The production process is carried out using modern equipment. Our specialists regularly implement the latest innovative technologies to achieve maximum results. A high-quality anti-corrosion protective coating is applied to the structure. Thus, alloy wheels for the Daewoo Matiz are completely protected from high levels of reagents.

Alloy wheels R13 on Matiz have an original design. The list of products is very diverse; a wide range of models and standard sizes allows the design to be used on cars of almost all brands. Alloy wheels for the Daewoo Matiz reduce fuel consumption.

Stamped steel products provide reliability, high quality, and strength.

Discs

Selecting and purchasing high-quality wheels for the Daewoo Nexia is not difficult. Many brands on the market are suitable for this car model. You can choose products to suit every taste and budget. The most common are stamped wheels, but cast ones can also be purchased if desired. Products of any design, color and shape are presented.

Daewoo Nexia, stamped steel wheels

The size of Daewoo Nexia wheels from the factory can be in three designs, with radii from 13 to 15 inches. But if necessary, it is common among tuning enthusiasts to install even R16 wheels. For this, special spacers are used.

Daewoo Nexia has been produced in various countries since 1994, and since 2016 it has been changed to the Ravon Nexia brand. Regardless of the country of manufacture, the recommended wheel and mount sizes remained the same.

Thanks to factory unification and ease of selection of wheels, you can choose from original, used and cast products. All these options have their advantages and disadvantages. To make the right choice, you need to consider them all.

Original wheels

The car is equipped with such models from the factory. When purchasing original Nexia wheels, you can be sure that the sizes of the mounts will not match, or the wheels will not fit into the arches. Original products are a guarantee that the car will meet all the necessary characteristics of handling, smooth movement, and safety. The car will behave predictably on all types of road surfaces in all weather conditions.

How to choose original wheels

First you need to decide on seasonality. For winter, it is recommended to buy wheels one or two inches smaller than for summer.

Maximum safety while driving will be provided only by original rims. A good level of safety is also ensured by products from proven quality brands. It is not advisable to experiment with replicas or used wheels.

For Daewoo Nexia of any year of manufacture there are no problems with the selection of wheel rims of any size. Both cast and stamped products can be installed.

Source

Tire and wheel sizes for Daewoo Nexia 2013

Daewoo Nexia GM T Restailing 2013 1.5i

Generation: GM T Restailing Engine: I4, Gasoline Power: 84 hp
(62 kW) Wheel rim bolt pattern [td]PCD (number of holes x circle diameter)

What wheel sizes does the manufacturer recommend to install?

The Daewoo Nexia GM T Restailing 2013 1.5i is equipped with 5.5Jx14 ET49 rims assembled with 185/60 R14 82T tires as standard. Where:

• 5.5J - rim width in inches;
• 14″ — tire diameter in inches;
• ET49 - disc offset in millimeters.

The vehicle tire marking 185/60 R14 is deciphered as follows:

• 185 — profile width (cross section of the tire) in millimeters;
• 60 - profile height as a percentage of its width;
• R - radial cord winding;
• 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82T:

• 82 - maximum permissible tire load 475 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x100. Thus, all disks are mounted with four bolts and the distance between them is exactly one hundred millimeters. The car's hub diameter is 56.6 mm.

Standard tire pressure is 2 MPa.

Daewoo Nexia GM T Restailing 2013 1.6i

Generation: GM T Restailing Engine: I4, Flex-Fuel Power: 109 hp (80 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The Daewoo Nexia GM T Restailing 2013 1.6i is equipped with 5.5Jx14 ET49 rims assembled with 185/60 R14 82T tires as standard. Where:

• 5.5J - rim width in inches;
• 14″ — tire diameter in inches;
• ET49 - disc offset in millimeters.

The vehicle tire marking 185/60 R14 is deciphered as follows:

• 185 — profile width (cross section of the tire) in millimeters;
• 60 - profile height as a percentage of its width;
• R - radial cord winding;
• 14 is the tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 82T:

• 82 - maximum permissible tire load 475 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4x100. Thus, all disks are mounted with four bolts and the distance between them is exactly one hundred millimeters. The car's hub diameter is 56.6 mm.