Third party manufacturers, depending on configuration and specifications№Positive1. Victor, 39 years old: after buying the car, he did not change the radio, despite the push-button control option. The sound quality is not bad, the radio reception is excellent, that’s enough for me. 2. Konstantin, 41 years old: bought the car second-hand, second owner. I didn’t change anything, I left the original radio. The functionality is good, the build quality is also good, it reads from a flash drive. 3. Vasily, 44 years old: I listen to the radio more, the reception is good in the city. True, it causes interference near metal structures, but this is natural. 4. Kirill, 36 years old: I work as a taxi driver, on wheels all day. The standard tape recorder saves the day, it works properly. My friends recommended replacing it with a touchscreen model from the new Granta, but so far the old one hasn’t failed. Negative1. Victor, 38 years old: the standard audio module, although not bad, seemed to me not enough, so I replaced it with a foreign one and supplemented it with an amplifier. Now the volume is good, the quality is excellent. 2. Mikhail, 42 years old: I work as a courier, I drive for the entire shift. I expected more from the standard radio, so I had to replace it with a new one. The volume suits me, I plan to connect an amplifier - a crossover. 3. Ivan, 33 years old: I bought the car second-hand, immediately replaced the audio module, the reviews are not good. New and high-quality equipment from Trinity, no problems. 4. Vladlen, 40 years old: friends gave me a gift for my anniversary in the form of a radio with touch controls. Before this there was a push-button one. Can't compare, quality, sound, control, functionality at a high level.
Conclusion The opinions of motorists on the functionality and sound quality of the standard radio are divided, which is obvious. Everyone evaluates according to their own criteria. Some people care about sound, others about functionality, and others about control. Regardless of the type of radio: push-button or touch-sensitive, the workmanship is good. No massive breakdowns or defects were recorded. Maintenance is not expensive, parts and components are available both at official representative offices and on the Internet. Now it will not be difficult for the owner to remove the radio on the Granta liftback with his own hands without contacting a service station.
Installation of acoustics on Granta
Speaker in the car door
First of all, you will need to dismantle the plastic pocket that covers the compartment for the stereo system. Use a screwdriver for flat type screws. When the pocket is removed, you will see that behind it there are special sockets where ISO plugs from the future speaker system will be placed.
After this, you need to remove the protective metal frame from the radio. We install it in the vacated opening under the plastic pocket. Successful fixation of the equipment is usually accompanied by a characteristic click.
Now you will need to connect the plugs in accordance with the existing ISO standard, to which the electrical wiring of all international format radios meets. Incorrect connection of the audio system connectors can lead to malfunction of all electrical devices in the car, including the radio.
It is worth noting that many car radio manufacturers make individual connectors for them. In this case, the kit almost always includes a special adapter for ISO standard plugs. If your radio does not comply with the ISO standard and does not come with an adapter, you can consider cutting the wires from the radio plugs or from the car's electrical wiring. After this, you will need to properly solder the wires in accordance with the color pinout.
It is strictly not recommended to resort to simply twisting the wires with adhesive insulating tape. This type of connection is impractical, since in winter the tape freezes and cracks, which can cause the wiring to short out and electrical appliances to fail. For a high-quality connection, you can use terminals that are designed for clamping wires.
ISO standard connectors are prepared only once. After this, you will not have to deal with selecting plugs and pinouts when installing a new radio. This procedure should take no more than 3 minutes.
The ISO standard uses 2 types of connectors: brown and black. The first is intended to ensure the operation of all the acoustics of the car. The second is for special functions of the stereo system and its electrical power supply. The pinout diagram for ISO is shown in the figure.
ISO pinout diagram
Audio preparation Grants of different configurations
In the “standard” configuration, the Lada Granta has pre-installed power wiring harnesses, which are located in the console opening. Electrical wires are connected only to the radio, so don’t be surprised if you don’t find them in the doorways. To wire to the doors, you will need to pull power wires, which are located under the console panel
In this configuration of the Lada Granta, the stereo system can be installed independently, if due attention is paid to it
In the Lada Granta Norma, the power wires coming from the console are already routed to the doorways. You only need to connect the audio system in accordance with the assembly diagram. It's not uncommon for the stock door wiring to not match up with some speaker connectors. To solve this problem, you need to purchase suitable wires and replace them in the doorway. Lada Granta Norma has a trim with a special pattern for the speakers. Based on it, you can cut the opening yourself.
During assembly at the factory, the Lada Granta luxury version is equipped with a touchscreen multimedia system and speakers. The improved radio tape recorder is complemented by Bluetooth function and a 5-inch display with line output. In addition, the built-in radio allows you to connect a USB 2.0 flash card, through which you can listen to recorded music.
The standard radio for the Lada Granta model is an improved device, the design basis of which is the “Sirf Atlas” processor, supplied by the well-known. In addition to the presence of a radio receiver, the device is equipped with a large touch screen and has the ability to connect an external source via a video input by replacing the software and performing firmware. However, in the basic configuration of a domestic car there is only a push-button radio. Many owners are not happy with this fact and want to connect a more modern radio. This article will tell you how to install a radio.
Firmware for Lada Granta Lux radio, do it yourself
For this we need:
- GPS receiver;
- Huawei 3G modem;
- SD card;
- USB – splitter (hub).
The procedure itself for flashing the Lada Granta Lux radio is very simple.
- First of all, you should clear the SD card from the previous information in FAT16.
- The information data (files) of the firmware (Chain.bin, chain.lst, NK.bin, TINYNK.bin) are copied to the root folder of the SD card. The root folder is the memory card itself, without any internal folders. Opens when you turn on a flash drive or any other media.
- The flash card is removed from the USB port.
- The SD card is inserted into the car's multimedia system.
- Car radio Lada Granta Lux, reboots. In this case, hold down the volume button for 15 seconds.
- During the reboot, an update occurs, after which the auto player boots into desktop mode.
- We move to the screen function adjustment mode. Click on the Calibration/Recalibrate icon, and click a second time on the screen itself, while the countdown is happening on the device display.
- We reboot the system again, but with the SD card inserted.
The firmware for the Grant Lux head unit is complete.
Possible problems with the operating system after flashing the firmware
Very often, after the installation of the improved version of the 2015 OS on the multimedia system of the Lada Granta Lux car is completed, the radio tape recorder freezes on the Lada manufacturer's emblem. This may happen due to the fact that some storage medium is inserted into the USB port.
Also check whether an empty operational file has been created in the USB root folder, which after a reboot displays the Windows desktop on the monitor.
Reformat or even replace the CD card and repeat the firmware update from the very beginning according to the proposed scheme.
If the actions we recommended did not help, try turning off the power supply to the radio for at least five minutes.
By the way! All operations related to the reinstallation of programs on the standard radio installed at the factory are performed at your own responsibility. In this case, the manufacturer's factory warranty is void.
Stock (standard standard) firmware for the multimedia system installed in the Granta Lux car, as well as modified, home-made versions of the basic Windows operating system that vary in level of performance and functionality, can be found in large quantities on numerous automotive forums on the Internet.
It should be noted that the official manufacturer AvtoVAZ does not provide any special information on this matter. That is, the information on the firmware itself is present on the official website, but has not been updated since the release of the first model of the car itself.
Due to these circumstances, car enthusiasts are forced to find and share firmware options themselves with others who want to update the OS of their cars, for better use of all the options and functions declared by the manufacturer.
We bring to your attention video instructions on how to download the firmware of the Lada Granta Lux radio on 4 PDA, with subsequent installation on the MMC.
What is the functionality of the radio?
The fact that there is a standard radio in the domestic car Lada Granta Lux and in Kalina-2, and the devices are constantly being improved. A special feature of the radio is that it fits deep into the standard place, which is accompanied by minor difficulties when removing it. The large monochrome display displays a user-friendly interface.
Reviews from owners indicate that the software has an operating system based on the legendary Windows, the potential capabilities of which are increased by firmware. It is possible to create a desktop in the image of a household computer and connect to the Internet. To do this, you should use a 3g modem.
If you need to enter data, manipulation can be done using the on-screen keyboard. Own memory is not enough, so to meet the ever-growing demands of owners, it is recommended to use an SD card as a storage medium. This drawback is included in the list of reasons, due to the relevance of which, most motorists prefer choosing a foreign vehicle.
A convenient option for connecting with a mobile phone is available for the Lada Granta radio. This allows you to make calls without having to take your phone out of your pocket. You only need to activate a specific button on the device display. This is a kind of extended “hands-free” function.
The radio receiver is also not without pleasant features. If you program a news wave, the device will automatically switch to it from any other channel when a program on the designated topic begins broadcasting.
In the LADA Granta standard, the radio with an integrated LCD display is capable of supporting such file formats as:
- outdated "MP3";
- "WMA";
- "WAV";
- video files that support the “WMV” extension.
Advice for future and current owners of VAZ push-button radios
The release of standard VAZ “devices”, devoid of an expensive “sensor”, has been expected for a long time. Back in the first half of the year, we were told that such a unit should appear in the fall. As you can see, VAZ was embarrassed to build a graphic display into the radio, and all information on the screen is displayed in standard symbols. The only available backlight color is emerald (there will be more of these colors in crossovers). The device is a “turn on and listen” device, and in standby mode the display displays the time.
The fact that the manufacturer placed the USB port right on the face of the radio is not bad. Now owners have the opportunity to quickly connect a USB drive, or use the standard port as a power source. It will be easy to connect a smartphone or tablet and place it on the dashboard. This is cool! It is recommended to immediately install a short USB flash drive into the USB port to protect it from dust. And it’s also advisable to occupy the port intended for SD cards with something.
All radios produced by Itelma LLC are well aware of a file system such as FAT32. This means that you need to format flash drives in it, onto which audio files in MP3 and WAV format will then be recorded. The signal to the speakers standardly installed in the doors comes without distortion, and the power of the built-in amplifiers is unlikely to seem insufficient to anyone. Enjoy it for your health.
We can state the fact that the new head unit developed by AvtoVAZ turned out to be more than twice cheaper than the touch media center. So, there is no need to succumb to the persuasion of sellers to buy a 7900010-40 radio for 10, 8 or 6 thousand rubles. However, we will leave the choice to the owner.
In fact, VAZ acted very unusually by releasing another “device” in a non-standard form factor. Car dealers should not have any problems with the availability of one or another radio, since the car plant has been working on pre-orders since September. True, it will be difficult to purchase the “device” in question separately from the car, unlike luxury media. The main thing is that two requirements are now met at once: the owner does not overpay for unnecessary options, and at the same time uses only standard VAZ equipment. It would have been like this a long time ago... Let's say if the radio was 1DIN high, it would be equipped with a removable muzzle, but what's good about that?
How to eliminate some shortcomings of the multimedia system
Sometimes, in order to start using new media, you need to purchase it. She will certainly be able to cope with tasks that are standard. But you can’t expect more from it without additional modifications. Without this, you will not be able to configure the navigator or connect a rear view camera.
It must be said that many multimedia that modern foreign cars are equipped with are significantly inferior in their capabilities to the MMC Grant. This system is unique and quite competitive. If there are minor problems in the operation of the MMC, then updating the MMC firmware will eliminate them. Let's look at how to make firmware for 2014.
Features of audio system installation
When connecting the audio system wiring, you should take into account some of the power supply features of this unit. This is provided in the car via red and yellow wires. The task of the first is to remember the audio system settings, and the task of the second wire is to turn off the radio, the process of which depends on the position of the ignition key.
The manufacturer recommends using a parallel method of connecting both wires; in this case, the audio system will only be turned off manually, and the ignition key will not influence the operation of the radio.
You can find many videos on the Internet where a radio is installed on a Grant video, but there is no universal option for installing an audio system on this car. Here, a lot depends on the equipment of the Grant, and the richer it is, the less headache it gives its owner with the installation of the radio.
Almost always, when a radio is installed in Grant, the installation is carried out with the negative terminal on the battery removed. Failure to comply with basic safety requirements can not only damage the acoustic equipment, but also significantly damage the entire electrical system of the car.
In such a matter as installing a Grant radio, haste cannot in any way contribute to a successful installation, because the stable operation of the audio system and the good mood of the driver who has decided to acquire car “music” depend on the quality of the installation and compliance with safety measures.
Tools:
- Open-end wrench 10 mm
- Small flat screwdriver
- Knife (if necessary)
- Soldering iron (if necessary)
Parts and consumables:
Notes:
Initially, in this car model, the calculation is made for a 1-DIN radio. If the owner wants to install another type, a newer one, for example 2-DIN, he will need to start sawing the partitions in the console itself. And if the size is not suitable, then a suitable cantilever frame will have to be cut into the panel. This is much more complex than the first type of installation listed. In the second option, it is better to entrust the installation to a specialist, because there is a high risk of damaging the interior trim.
Here is a description of how to install a 1-DIN radio.
1. Remove the negative terminal from the battery.
2. Remove the plastic pocket installed in place of the future radio using a flat-head screwdriver.
3. Having taken out the pocket, on the back of it you will find slots where ISO connectors will be inserted to connect the radio. Disconnect the connectors to completely remove the pocket.
4. Now remove the metal frame from the radio and install it in the place where the plastic pocket was. Unbend the frame's tendrils to lock it securely in place.
Note:
There should be a click to confirm that the frame installation was successful.
5. Connect the connectors to the radio.
Note:
If you connect the radio to the connectors incorrectly, all car systems may fail, including, of course, the sound system.
Some radio manufacturers make custom connectors. Most of them come with an ISO plug. But there are times when none of the types are suitable, then the last option remains - cutting the wires. You remove the original plugs of the radio and the plugs of the car wiring and solder them together, but be sure to match the color.
A mistake many car enthusiasts make is twisting the wires and wrapping them with adhesive-backed insulating tape. In winter, the same electrical tape cracks due to frost. As a result, a short circuit may occur in the wiring, which will lead to the failure of all electrical systems of the car.
6. Insert the car radio into the previously installed frame.
7. How to install speakers, see here.
The basic versions of the Lada Granta passenger car are not equipped with a speaker system and a player. The installation of a radio on a Lada Granta is carried out by a trading organization upon the order of the future owner. It is allowed to independently modify the design of the machine, as well as replace the installed equipment with a higher-quality device that has an expanded list of functions.
Other features of standard multimedia
The general feelings of owners who have a standard radio in their car are positive. The display is informative and easy to read. The touch keyboard functions flawlessly. The standard radio itself is capable of high-quality reproduction of sound programs from micro-SD cards. However, using USB format media can be challenging.
The device also has some nice options:
- equalizer;
- activated replay mode;
- random sequence of playing tracks (“Random”).
Multimedia LADA Granta is capable of supporting images in 5 formats, which allows you to view photos without any problems. But not everyone can make the correct settings for the “phone” option on the first try. This function will be convenient for a busy owner who is forced to communicate by telephone even while on the road.
The standard speakers of the LADA Granta disappoint many, since even at a 45 percent volume level they emit wheezing, characteristic of bass overload. Some timid music lovers are alarmed by volume jumps when switching to “radio” mode.
Here is a list of shortcomings that provoked many Grantavods to purchase an alternative version of the radio. Today, the progressive version “2191” claims to replace the outdated standard device “2190”. The new device will please you:
- improved sound;
- interface for connecting with a rearview camera;
- navigation complex;
- integrated input for connecting a subwoofer.
Not every minimum configuration of a car today will please you with the presence of a standard radio. If, nevertheless, such a device is present in the database, it is far from a fact that it can please you with its informative interface and sound quality. If your version of the car has a push-button radio, then, as we found out from the article, installing a more modern radio, as well as the subsequent connection of the radio, is not a difficult matter, the main thing is to approach everything correctly.
The LADA Granta model also did not acquire the role of an exception in this list. After all, the trend of a modern car suggests the owner’s ability to carry out exciting measures to improve and tune his “iron horse,” and you shouldn’t be upset, because a push-button radio is easily replaced with a modern one.
Many motorists face the problem of removing the radio in their car. Some people cannot remove the standard device installed at the factory, others inherited the music along with the car, and others simply lost special keys. There are also plenty of reasons for dismantling - from repairing wiring to buying a new stereo system. Hence the demand for information arose on how and with what help you can carefully remove the car radio without damaging the plastic of the front panel. And although the operation is primitively simple and can be easily performed with improvised means, there are pitfalls in it that you need to be aware of.
How to connect an amplifier and subwoofer?
In addition to the need to connect a radio, many people want to connect a subwoofer and amplifier. Not every Lada Granta owner will be able to enjoy the sound generated by the standard radio. This fact forces car audiophiles to lean toward the additional installation of high-quality audio amplifiers and subwoofers. The goal is known - great sound.
To install the indicated devices yourself, we resort to the following simple manipulations.
- First, we dismantle the lower part of the center console.
- We remove the panel and find mini ISO connectors.
- We insert the plug of the previously purchased adapter into one of these sockets (indicated in yellow). We do not touch the blue and green cables. Owners who have already performed this procedure note the following - we can no longer use standard wires, so we resort to the “mini iso” connector.
- Next, we connect a special fuse to the battery, having previously connected the cable from the amplifier (marked in red) to it.
- The subwoofer in combination with the loudspeakers is connected to the amplifier. We connect the battery ground wire (black) to the LADA Granta body and the corresponding terminal on the amplifier.
- After the measures have been taken, we return the panel and radio to their place.
- Enjoy the updated and high-quality sound.
Soundproofing panel/dashboard Grants
| Probably all owners of LADA Granta have noticed that the interior of the car begins to fill with crickets over time, and the dashboard is no exception. The reason is poor build quality and materials (cheap plastic). To get rid of crickets for a long time, it is recommended to soundproof the Granta panel, and the advantage of this method is that it does not need to be removed for this. |
There can be many sources of rattling and squeaking in dashboards, let's look at the most common ones:
The radio/radio plug is rattling. Solution: use anti-creak or sealant.
The air duct rattles at the point of contact of the windshield blower nozzle. Solution: use silicone sealant or anti-squeak.
The airbag plug creaks. Solution: when installing the plug, coat it with sealant, or use bitoplast (5mm or 10mm).
The panel trim creaks. Solution: Remove the dashboard trim and glue the places where it touches (on the panel and on the trim itself) with bitoplast or anti-squeak.
The panel/dashboard creaks. Solution: The solution to the problem of panel rattling must be comprehensive.
- It is recommended to weight the dashboard using vibration materials (for example, 1 sheet of STP Gold 250 RUB/sheet is enough). Heat the pieces with a hairdryer and glue the panel with a “vibra” using a hard roller. A heavier Granta panel will produce less extraneous sounds.
- Wrap the torpedo wires with anti-squeak.
- Treat all removable elements with anti-squeak (panel trim, airbag cover, glove compartment, etc.)
- Tighten all possible panel mounting nuts.
Soundproofing the dashboard is a modification that should be done at the factory, but AvtoVAZ provides car owners with the opportunity to do this with their own hands.
Remember that the best sound insulation is when a set of works has been carried out aimed not only at insulating from external noise (noise from wheels, engine, wind, etc.), but also eliminating creaks and crickets inside the car.
Similar materials
How to flash the firmware
- Buy an SD card, format it in FAT, exFAT format;
- We download the firmware for free on the manufacturer’s official website;
- We save the data in the root directory of the SD card;
- We insert the SD card into the slot on the radio, start it, wait for the update to finish;
- Turn on and off the module;
- We customize the new interface for ourselves.
If the firmware is installed incorrectly, additional screen calibration using the CAN bus will be required. It is impossible to do this yourself, only in a service station. After successful flashing, the following is available:
- graphic equalizer;
- viewing photos, pictures, videos;
- improved sound quality;
- possibility of installing a navigation system.
Disadvantages of a standard radio
- Outdated firmware from the “box”;
- Not all options are initially available;
- The need for periodic software updates;
- Push-button interface.
Homemade plates to help
Let us immediately note that not many tools are required to remove the radio. It is enough to have special plates on hand with hooks at the end. In many cases, such tools are included with the standard car radio, but if it is not there, it’s okay. You can make the blades yourself using frame wipers or ask them in stores.
Characteristics of the standard radio "Lada Grants Liftback"
The radio for the Lada Granta liftback is supplied as standard equipment. Product in 2-DIM format (100 x 180 mm).
In addition to the classic radio, there is a built-in card reader, Bluetooth, and a USB output for connecting flash drives. The only disadvantage of the audio module is that it is a push-button type. Which is not to the liking of many car enthusiasts, which is why they install more modern modifications.
During the startup of the audio module, a greeting from Lada Kalina 2 is displayed. This is not an error, as many owners think. This type of audio was originally developed for the Lada Kalina 2. Obviously, the manufacturer did not change anything and started production for the Granta. Installation/disassembly of the module is somewhat complicated due to the tight fit, so be prepared for this.
It is based on the Windows operating system, which allows you to connect to the World Wide Web via a 3G modem. There is no such option out of the box; you first need to reflash the device, but more on that later.
Via Bluetooth, it is possible to connect to a phone, and the “hands-free” option is activated. Which is very convenient and practical when driving. The owners were also pleased with the stock radio. At first glance it looks simple, but it turns out not to be so. Available programming function for a specific channel on a given topic.
For example, as soon as a news broadcast comes on, the radio automatically switches to the programmed channel. The audio module reads the following formats: MP3, WMA, WAV, WMV. Control of the standard radio of the Lada Granta liftback is accessible and intuitive, even for an inexperienced owner.
Choosing the right radio size
We carry out installation either independently or by contacting specialists at the service center. In the second case, the service is paid.
By default, all VAZ and Lada models are equipped with a 1-DIN radio. The opening dimensions correspond to: 180 x 50 mm. This is an old standardization that has been in force since the times of the USSR. Modern audio modules can be purchased complete with a pre-installed LCD display. The size of the opening must comply with the standard: 180 x 100 mm, that is, doubled in height. Size marking: 2-DIN.
To install the radio in the Granta liftback, cut out the top pocket, remove the plastic, and install the assembled module. For a beginner, the process will seem somewhat complicated, so strictly follow the instructions.
Related link:
Lada Vesta or Lada Granta Liftback? Expert opinion
Audio system installation specifics
When connecting the wiring, you should take into account the presence of nuances in the power supply. The latter is turned on thanks to two wires. Red is designed to save the speaker settings, and yellow controls shutdown, which depends on the ignition.
If you make it so that the audio system can only be turned off manually, you should resort to a parallel connection of these wires. This method results in excessive power consumption when the vehicle is idle. But by installing a certain regulator on the red wire, you can forget about this problem. It is quite possible to even attach it to the alarm system, then the radio will automatically turn off as soon as the car is locked.
If the player turns off on its own while playing music at high volume, or the screen flickers and the appearance of unnecessary “high-pitched” sounds is noticed, then this indicates changes in direct current during the period of battery discharge. The problem can be resolved by installing a capacitor, which ensures a constant supply of electricity to the radio.
Removing the central trim of the Lada Granta instrument panel
Tool:
- Set of plastic mounts
- Small flat screwdriver
Notes:
Remove the cover if it is necessary to dismantle the head unit of the sound reproduction system, switches, and instrument panel.
1. By prying the plastic mounts from the top and bottom, and from the bottom, remove the radio/recorder plug from the niche for the head unit of the sound reproduction system and remove from the radio/take out from the niche the two blocks of wiring harnesses for connecting the head unit of the sound reproduction system.
2. Remove the heater/air conditioner temperature controls and air flow direction control by pulling them toward you.
3. Remove the handle from the air recirculation control lever by also pulling it towards you.
4. Then use a screwdriver to carefully remove the fan control mode.
5. Using a screwdriver and overcoming the resistance of ten clamps, move the central trim away from the instrument panel as far as the length of the wires allows.
6. Disconnect the wire block from the air distribution control lamp socket.
7. While pressing the latch, disconnect the wiring harness block from the heated rear window switch.
8. By pressing the latch, disconnect the wiring harness block from the fan operating mode switch and the wiring block from the air temperature controller backlight lamp socket.
9. While pressing the latch, disconnect the wiring harness block from the hazard warning switch, and remove the central trim of the instrument panel.
10. Install the center trim of the instrument panel in reverse order.
The article is missing:
- Photo of the instrument
- High-quality photos of repairs
Source: carpedia.club
Installing speakers in the standard places of the front doors on the Lada Granta
In addition to the radio, for its normal operation, it will also be necessary to install speakers and acoustics in the car door.
To cut holes in the door trim, it is better to remove it from the car. To do this, you need to dismantle the door handle, the plastic casing in which the door opening lever is installed, and the glass position adjustment handle (if you have a standard package). See the article “Removing and installing door trim on the Lada Granta.” The door trim and metal frame of the front doors provide a size for 16 cm speakers.
Depending on the variation of the speakers you have chosen, the following problems may arise: - if you have chosen 13 cm speakers, then you need to cut out a corresponding hole in the center of the plug on the door trim according to the template supplied with the speakers. In this case, the hole in the door frame is slightly larger and you will have to increase the plane from the mounting “ears” of the speaker to the mounting holes in the door;— If you decide to install 16 cm speakers, then you may have to modify the door frame here, since the speaker basket can It definitely won’t fit into the standard hole in the door hardware. You will need a grinder or a jigsaw with metal files. We cut a hole of the required diameter and try on the speaker. We connect the speaker and install it in place. We install door trim. We mount the frame for the metal grille of the speaker and, accordingly, firmly fasten the speaker to the door with 4 self-tapping screws. We install the speaker grille.
This is, in principle, the entire algorithm for installing a radio and speakers in the front doors on a Lada Granta car. In addition, you may find the material from the article “Wiring diagrams of the Lada Granta” useful, which shows the blocks for connecting the power supply of the radio and connecting the speaker wires to it, blocks 17 and 18. The “standard” configuration also includes wires going to the front door speakers car. So, the connection of the radio speakers in the doors is carried out through the rear harness, see the article “Wiring diagram of the rear wiring harness of the Lada Granta”, contacts on the block 16,17,18,19.
Additional information when installing speakers in the front doors of a Lada Granta car: When choosing speakers for installation, choose acoustic sets with minimal protrusion of the plastic frame and metal grille. The fact is that some speakers, after installation, may interfere with the opening of the glove compartment. Not all speakers, but some. As a result, you will crawl into the glove box of the Lada Grant through a small gap, or only after you open the right front door
Safety warnings when installing and connecting the radio in a Lada Granta car. All installation work should be carried out with the negative terminal of the battery disconnected. After installing the radio, you must carefully check all connections and that they are connected correctly.
Dismantling a standard music center
Often, standard head units (aka radios) are removed using the method described above, since they are attached to 2 or 4 clips. For example, the factory player on a Lada Priora car is held on by two latches, and to unlock them, thin steel strips must be inserted between pairs of radio channel switching buttons “2” - “3” and “5” - “6”.
Advice. Before you start disassembling the factory radio, find out about the method of its fastening, so as not to poke the pieces of hardware at random if you do not find technological openings.
In Priora, stripes must be inserted between the buttons
To remove car radios that are fastened with screws, you need to prepare a simple set of tools:
- thin flat screwdriver or knife;
- Phillips screwdriver;
- set of small sockets (from 6 to 10 mm).
With this mounting option, the factory turntable must be unscrewed using the heads
On different brands of cars, standard players can be mounted in different ways, but the principle is approximately the same: the device is screwed to brackets that are covered from the outside with a plastic lining. As an example, we propose to consider removing the radio on a Korean Hyundai Solaris car, performed in the following order:
- Use a flat-head screwdriver or knife to pry up the lower corner of the plastic decorative panel framing the stereo. Pull the edge and grab it with your hand.
- Gently pull it towards you and release the first latch, and then move around and unlock the rest.
- Holding the panel with both hands, remove it and, if necessary, disconnect the connectors located at the bottom.
- Unscrew the 4 mounting screws with a Phillips screwdriver and pull out the radio.
How to install in Granta
To install the radio, you will need to perform several sequential steps. They are presented in the form of step-by-step instructions:
- Use a pry bar to remove the climate control knobs.
- Pry and pull out the cover of the middle of the panel. When dismantling, you will need to remove the wiring sockets to the equipment control keys.
- Use a hacksaw to cut out the main jumper in the dashboard. You can use a construction knife. Reduce the channel for the central ventilation deflectors by 5 mm.
- Install the car radio into the installation shaft using ready-made brackets. Fix the device at special points located in the panel.
- Mount the frame for framing. It is necessary to rearrange the deflectors on it in advance.
It’s easy to find many videos on the Internet with the title “installing a 2 din device in a Lada Granta.” Detailed descriptions will help you complete the task faster.
If the 2 DIN radio supports a subwoofer, it is advisable to run the wiring under the door sill trims. If an active subwoofer is used together with a bass reflex, you need to route the power cables into the trunk. They must have a special fuse.
A double-din speaker system differs from a stamped one not only in size. The DIN radio has advanced functionality, which explains its popularity among motorists.
Connected amplifiers greatly increase signal reception. Simplification of radio search occurs due to accessible viewing of system files. The storage devices are connected using a USB connector.
Music zone allows you to switch the frequencies you listen to. There is access to various radio programs in the AM and FM bands.
The combined navigator has a calculated router map.
Impact protection extends service life.
The development of digital technologies has not spared modern cars. Installing a 2 DIN device does present some challenges, but these are outweighed by the excellent functionality.
Removing the device according to the instructions
The algorithm for removing the radio if you have the keys is outrageously simple. It is worth considering in order to understand how to act if they are lost. The order is as follows:
- Remove the front panel of the player and the decorative plastic frame, prying it up with a flathead screwdriver if necessary.
- Insert the first key into the gap between the housing and the mounting frame, located at the end. You should feel slight resistance as the tool bends the latch.
- Repeat the same action with the second key.
- Grasp the radio with your hands by the protruding parts on the sides of the case and carefully remove it from the niche.
To remove the radio, 2 keys are used
Special keys must be inserted into the side openings
When the radio is equipped with four latches, access to them is through 2 pairs of round holes. You need to insert 2 U-shaped keys into them and pull them out by the body, as described above.
The music center can be easily removed using keys
Review of prices for Lada Granta audio recorders
| Module type | Price, rub.) |
| Standard 1-DIM (push-button version) | from 3500 – 3700 |
| Standard 2-DIM (sensor) only for Lada Granta liftback | from 7500 – 8000 |
| Third party manufacturers, depending on configuration and specifications |
*prices as of September 19, 2018.
| № | Positive |
| 1. | Victor, 39 years old: after buying the car, he did not change the radio, despite the push-button control option. The sound quality is good, the radio reception is excellent, that's enough for me. |
| 2. | Konstantin, 41 years old: bought the car second-hand, second owner. I didn’t change anything, I left the original radio. The functionality is good, the build quality is also good, it reads from a flash drive. |
| 3. | Vasily, 44 years old: I listen to the radio more, the reception in the city is good. True, it causes interference near metal structures, but this is natural. |
| 4. | Kirill, 36 years old: I work as a taxi driver, on wheels all day. The standard tape recorder saves the day, it works properly. My friends recommended replacing it with a touchscreen model from the new Granta, but so far the old one hasn’t failed. |
| Negative | |
| 1. | Victor, 38 years old: the standard audio module, although not bad, seemed to me not enough, so I replaced it with a foreign one and supplemented it with an amplifier. Now the volume is good, the quality is high. |
| 2. | Mikhail, 42 years old: I work as a courier, I drive for the entire shift. I expected more from the standard radio, so I had to replace it with a new one. The volume suits me, I plan to connect an amplifier - a crossover. |
| 3. | Ivan, 33 years old: I bought the car second-hand, immediately replaced the audio module, the reviews are not good. New and high-quality equipment from Trinity, no problems. |
| 4. | Vladlen, 40 years old: friends gave me a gift in the form of a radio with touch control for our anniversary. Before this there was a push-button one. Can't compare, quality, sound, control, functionality at a high level. |
Conclusion The opinions of motorists on the functionality and sound quality of the standard radio are divided, which is obvious. Everyone evaluates according to their own criteria
Some people care about sound, others about functionality, and others about control. Regardless of the type of radio: push-button or touch-sensitive, the workmanship is good
No massive breakdowns or defects were recorded. Maintenance is not expensive, parts and components are available both at official representative offices and on the Internet. Now it will not be difficult for the owner to remove the radio on the Granta liftback with his own hands without contacting a service station.
What is a catalyst and why is it needed?
A catalytic converter is a part of a car's exhaust system that reduces exhaust emissions.
In simple words, it is a thick pipe with a porous supporting material inside - ceramics or metal with a honeycomb structure. Structure of a car catalyst
A thin layer of dust of noble metals with high chemical activity (palladium, rhodium, platinum, iridium) is applied to the walls of these honeycombs. Exhaust gases upon contact with such spraying react, and some of the elements formed during fuel combustion are bound. As a result, air comes out of the exhaust pipe of the car with a purification degree of up to 98%.
The catalyst starts working only when the temperature reaches 300 degrees. That is, immediately after starting the engine it is useless.
Where is he located
The converter is located in the exhaust pipe between the engine and the muffler. Modern devices are three-component: the first element binds nitrogen oxides, the second destroys some of the unburned fuel particles and carbon monoxide, and the third - a sensor - analyzes the exhaust at the outlet and transmits information to the BC.
