Replacing the cabin filter on a Nissan note car: step-by-step instructions

A common mistake among car designers is the tight layout of the air conditioning system, as a result of which the simplest operation in theory, replacing the cabin filter, can become many times more difficult than expected. This problem is especially acute for compact cars, where the entire ventilation system should not take up space from an already small interior.

Having replaced the cabin filter on a Nissan Note yourself, you will have to choose one of two options - either remove the glove compartment and insert the filter in an awkward position, or save time by not removing the glove compartment - but the inconvenience will increase slightly.

What happens if you don’t change the filter or drive without it for a long time?

Many drivers naively believe that they can do without a cabin filter, and some deliberately remove it in the winter, increasing the air flow to the air conditioner radiator. It is worth agreeing that, yes, heating works more efficiently, but another problem arises that will appear after a certain period of time.

Without a filter, dust, soot and other small debris will safely settle on the cooling holes of the radiators, thereby reducing air flow. Thus, when trying to improve heating, by the end of winter you will have to clean the radiators of the air conditioning system, which are not so easy to remove and in most cases cannot be done without contacting specialists. Driving without a filter element has a particularly detrimental effect on the operation of the air conditioner; the evaporator begins to become intensively covered with frost, which increases the load on the compressor and reduces work productivity.

While saving a little money on a cabin filter, you will need to spend thousands on cleaning the ventilation system and repairing the air conditioner. So be careful.

How often should I replace it?

Fortunately, in theory this does not need to be done so often - the factory prescribes a replacement interval of 30 thousand kilometers (every even maintenance) or once every two years. However, it should be noted that the cabin filter on the Note has exactly the same dimensions as on the familiar Logan - and there the replacement interval is set at 15 thousand.

Indeed, the Note cabin filter can withstand 30 thousand mileage only in a sterile environment, while summer dust, traditional for the Non-Black Earth Region, can clog it even after 8-10 thousand kilometers. The situation in traffic jams or industrial areas is no better: if relatively heavy dust particles from vibration partially fall off the curtain, which is standing almost vertically in the box, then the soot microparticles are firmly eaten into the pores of the filter.

In the fall, the need for an unscheduled filter replacement may arise due to the fact that its compartment is almost the lowest point of the air conditioning system. Accordingly, both leaves and moisture that get into the ventilation accumulate in one place, causing rotting that can affect the filter itself - shaking it out will be useless; only replacement will help get rid of the characteristic odor.

How to replace the cabin filter on a Nissan Note with your own hands

The cabin filter is an invisible part in the car that provides a comfortable microclimate in the cabin. The device provides high-quality air purification from contaminants and unpleasant odors. It is recommended to replace the cabin filter on a Nissan Note when malfunctions occur and in accordance with the rules required by the regulations.

Signs that a consumable needs to be replaced

Thanks to timely replacement of the cabin filter, the cleanliness of the interior and good performance of the car are ensured.

In Nissan Note vehicles, it is recommended to replace the filter after every 20,000 kilometers. When operating a car in polluted environmental conditions, it is recommended to replace it once every 6 months. Premature replacement of a part is recommended when:

frequent fogging of windows;
unpleasant odor in the cabin;
dust on the control panel and windshield.

Replacing the cabin filter should be carried out when the microclimate in the car is disturbed, when in winter the car does not heat up to the required level, and in summer it is excessively hot in the cabin.

Experts advise carrying out the manipulation before summer, as during this period the level of air pollution increases.

Rules for selecting SF

On a Nissan Note car, it is possible to install a one-, two-, three-layer and combined filter.

Single-layer SF ensures cleaning from sticks, insects, leaves and other large debris.
The two-layer part is designed to eliminate unpleasant odors, dust, and small invisible microparticles.
The three-layer structure ensures the elimination of not only large debris, but also bacteria, pathogens, and unpleasant odors.
The combined filtration system is designed to eliminate all of the above contaminants.

It is recommended to install original Nissan cabin filters 27891-AX01A on your car. If they are not available on the car market, you can use analogues - TSN 9.7.476 or Alco MD9924.

Step-by-step instructions for replacing the cabin filter on a Nissan Note

Before changing the cabin filter, it is recommended to buy one. The procedure is carried out using a screwdriver. There are two options for replacing the cabin filter. The first of them does not require first removing the glove compartment. The edge of the filtration system cover is located on the central trim of the console

Use a screwdriver to pry off the bottom of the cover. It needs to be lifted up, moving to the side, which will ensure that the part comes out of the seat. The debris that accumulates in the filter remains inside or spills out. To remove it, use a car vacuum cleaner.

Before installing a new filtration system, it is recommended to treat the air conditioner evaporator. This procedure should be carried out once a year, which will eliminate the possibility of bacterial growth. For this purpose, a special aerosol is used. You can prepare the composition yourself. To do this, use chlorhexidine or any other antiseptic, which is mixed with a small amount of fragrance.

The composition must be sprayed onto the surface of the evaporator. If foam products are used, then after treating the evaporator, close it with a lid for a certain time, which will eliminate the possibility of foam leaking into the cabin. After 10-15 minutes, the agent that will corrode the dirt will flow out through the drainage system of the air conditioner.

At the final stage, the new filter is twisted and installed in its seat.

Initially, you need to vertically squeeze the left edge of the part, which will allow you to push it through. At the next stage, the upper part of the lid is inserted into the space above the glove compartment. After screwing the lid down, the filter is pushed into the seat. The lid snaps into place with clips.

When using the second method, you need to open the glove compartment and unscrew the three screws that secure it. After removing the glove compartment, the valve is removed. The clips are wrung out on it, after which they are squeezed out. There is a filter on the left side. The holder rises up and is pulled towards the user. Next, a new part is inserted and fixed on the holders. The quality of installation of the cabin filter is indicated by the click that the technician will hear. The next step is to put on the valve, install the glove compartment in place and secure it with a self-tapping screw.

Conclusion

The cabin filter plays an important role in a car, so it must work fully all year round. It is recommended to replace the part when signs of malfunction appear.

Preparation for replacement and necessary tools

To replace the cabin filter element in a Nissan Note, you first need to prepare for the procedure. To do this, firstly, you need to free up the workplace by moving the passenger seat back all the way. If there are other objects that interfere with access to the glove compartment and the space below it, they also need to be removed.

Secondly, you need to prepare the tools, or rather, the instrument. To replace the cabin filter, you only need a Phillips screwdriver, preferably with a short handle. You may also need a clean rag to wipe off dirt and dust from the case.

The process of changing the filtration element

Having completed the preparation stage, you can proceed directly to installing the new part.

Step-by-step instructions for replacing the cabin filter in a Nissan Note:

Remove the glove compartment. To do this, unscrew three mounting bolts at the top and two at the bottom.
Remove the air valve located behind the glove compartment. To dismantle it, you need to press on the clips holding it.
Remove the filter on the left. It is held in place by a clamp at the bottom of the structure. The latch must be lifted up and then pulled towards you.
Wipe the housing from dust.
Install the new filter element in place.
Reassemble the structure in reverse order.

After assembly, it is recommended to turn on the heater and air conditioner alternately to make sure they are working properly. If yes, then replacing the cabin filter in your Nissan Note was done correctly.

Structural difficulties

Most compact cars have similar problems. After all, the ventilation system used should not take up a lot of space, since volume savings are initially expected. In this case, designers have to work hard on the layout. The result is reflected in certain difficulties in servicing a Nissan Note when the standard cabin air filter needs to be replaced.

One of the work options is an operation in which it is necessary to dismantle the glove compartment. Then you will have to install the cabin filter in an awkward position. You can refuse dismantling work, but then replacing the Nissan Note cabin filter will create more inconvenience.

Removing the Nissan Note cabin filter

Myth No. 1

Myth number one says: “To ensure the best heat transfer, it is necessary to polish the surface of the heat distribution cover of the processor and the heel of the radiator to a mirror shine.” This, unfortunately, is a half-truth, which is why many people really start to scrub the copper. Just don’t summon the genie, and all your efforts will be in vain, since a smooth surface does not guarantee evenness relative to the plane. Accordingly, non-flat, but smooth surfaces will have an uneven fit, in contrast to rough, but plane-parallel surfaces. And why do meaningless work?

Changing the cabin filter Almera Classic

The main task of the Almera Classic cabin filter is to protect people in the car, as well as its interior, from dirt, dust, exhaust, and other harmful substances. Over time, the cabin air filter wears out and becomes clogged. Therefore, checking it regularly is a necessary maintenance procedure.

To change the air purifier, it makes no sense to contact service centers. This operation is quite simple and not difficult to cope with.

When and why to change the cabin filter?

This inconspicuous detail is located in the Almera Classic inside the glove compartment. As a rule, the need to replace it arises when a persistent and unpleasant odor appears in the cabin.

The filter should be replaced every 10,000 km, when driving around the city, after 20,000 km when driving combined (country routes, city, village roads). The more it gets dirty, the higher the quality of cleaning, but the worse the ventilation system performs.

You can also determine when it is necessary to change the air filter visually. It will be heavily soiled or damaged. Frequent fogging of windows or extraneous noises when the ventilation is turned on indicate a need for replacement.

It is also advisable to replace the cabin filter when the leaf fall ends. By this time it will already have collected dust and poplar fluff. In autumn, the leaves begin to rot, and a musty smell appears in the Almera Classic interior. Therefore, it is recommended to change the air purifier in the autumn. In winter there will be no dust, and the air filter will last well until summer.

If your car has air conditioning, then using a clean cabin filter is necessary. This is due to the fact that if the evaporator becomes clogged, the air supply to the car interior will stop.

The Almera Classic air filter cannot be restored. Sometimes it is possible to revive them by blowing them out, but it will not be possible to completely restore them.

Which cabin filter to choose?

The cabin filter consists of a special filter element. Odors, various harmful substances, and impurities pass through the layers of such an element, settling on the fibers, thereby purifying the air. The air purifier is a rectangular design. Inside it there is a multilayer corrugated material. It is capable of holding up to 96% of dust.

There are two types:

simple - it is based on an element made of fibrous polypropylene;
carbon – activated carbon is placed between polypropylene plates.

In addition to the original Almera Classic cabin filter, there are also its analogues:

NAC CCF0116
Sakura CA-1875
MANN-FILTER 7799CH
Japanparts FAA-NS5
FORTECH FS013

The process of replacing the cabin filter Almera Classic

If the air purifier is not replaced in a timely manner, the fan begins to malfunction. Because of this, the level of humidity inside the car increases, and parts may begin to fail. The following may be susceptible to breakdown: air conditioner, stove or small parts susceptible to corrosion. Therefore, it is recommended to change it regularly.

Replacing the Almera Classic air purifier consists of several stages.

At the end of dismantling the glove compartment, remove the holder through the slot

At the preparatory stage, you should prepare a flat-tip screwdriver, rags, a new cabin filter, and antibacterial aerosol. Empty the glove compartment of all the things that are in it. Place the car on a level surface and provide unobstructed access to the glove compartment.

During dismantling, the glove box latches are released. To do this, find the retaining clamps, first turn them towards you, and then lift them up. First on one side, then on the other. Then remove the holder. The glove compartment folds down, and the lid of the cabin box opened in front of us.

Cabin filter cover Almera Classic

Open the box and remove the old filter element. Wipe the inside of the box with a lint-free cloth. Install the new one so that the arrow on the side points down. The original cabin filter is designated by the following article numbers: NISSAN 27891BM401KE, 27891-BM401, 27891-BM402, 27891-BM400.

Installation is carried out in reverse order. Having installed the glove compartment, we secure it. That's it, the work is finished.

The arrows on the cabin filter should point downwards

Conclusion

This procedure, performed on Almera Classic, is significant for the comfort and health of both the driver and passengers. After replacing it, you can see on the old air purifier that it is clogged with dust and smoked by exhaust gases. When choosing a filter element, preference should be given to a carbon filter.

When to change, what interior to install

According to the technical maintenance regulations, the cabin filter on a Nissan Note must be replaced at least once a year. Or when undergoing scheduled maintenance, which occurs every 15 thousand kilometers.

However, when used on Russian roads, within the period specified in the regulations, the cabin filter becomes quite clogged and ceases to perform its functions. Therefore, to ensure normal filtration, owners recommend cutting the time frame for replacing the cabin filter by half.

The ideal option is to change the Nissan Note cabin filter twice a year, once during the winter season, and once before the summer season. In the spring and summer, it is better to install coal, as it copes more effectively with various allergens and unpleasant odors. And in autumn and winter, ordinary dust is enough.

Although the service book indicates specific terms for replacing the filter element, it is often recommended to carry out the replacement earlier, that is, not according to regulations, but as needed. The basis for replacement are signs of filter contamination:

When the car is used in the summer on dusty road sections, the filter element becomes much more clogged with fine dust, as a result of which replacement may be required earlier.
With frequent idle time in traffic jams, the element becomes clogged with small particles of exhaust soot, as a result of which it may appear relatively clean in appearance, but at the same time the surface acquires a gray color, indicating severe contamination, and permeability is reduced to almost zero.
In the fall, leaves can get into the air ducts - even a small amount can become a breeding ground for millions of bacteria that cause an unpleasant odor. It is quite difficult to get rid of it; you will need not only replacing the filter element, but also completely cleaning the box.
Increased air humidity in the cabin (window fogging).
Reduced ventilation and heating system power.
Noise appears when ventilation is turned on to maximum.

Frequency of installation of a new cassette

Japanese developers have provided a certain interval at which it is necessary to update the cleaning cassette on the Note. The frequency is about 30 thousand km. mileage On average, this takes about 2 years.

Some drivers operate their vehicles in extreme conditions. Then we recommend lowering the mileage yourself, for example, to 20 thousand km. or up to 15 thousand km, like Logan. If you often drive on primers, the pores will become clogged even after 8-9 thousand km.

It is hardly worth cleaning such a block. It will only require replacement to eliminate unpleasant odors.

Comparison of clean and dirty filter elements

Cabin filter Nissan Note

The cabin filter in a car is designed to clean the air from dust, harmful impurities, carbon monoxide and protects the air conditioner from small particles of dirt entering the air duct system. Combined filtration allows you to reduce the content of toxic substances entering the cabin from the atmosphere by almost 98%.

To choose the right filter for Nissan Note, you need to take into account its properties and operating principle. The capabilities of the devices depend on the composition of the filter elements: simple ones with a paper or synthetic membrane are capable of trapping small solid particles no larger than one micron in size, modern ones work as an absorbent, absorbing gaseous contaminants.

Types of filters for the car interior

Based on the type of filter element design, there are two cabin filters:

The cartridge is a protective membrane consisting of several layers of porous paper or synthetic material.
The body is a combination of materials in several layers with a filler of an absorbent substance in a frame design (usually activated carbon is used).

Combined units combine the principles of operation of an absorbent and simple mechanical air purification. Their only disadvantage is their shorter service life and susceptibility to low temperatures and humid environments.

There are four main types:

Conventional filters with one material consisting of a membrane made of paper or synthetics. They work on a simple mechanical principle, blocking the air flow and retaining solid particles of dirt, soot and dust. The effectiveness of protection against carbon monoxide and harmful substances is no more than 20-30%, depending on the number of layers.
Coal - they contain an absorbent (activated carbon), which reacts with gaseous impurities at the molecular level, eliminating odor and neutralizing most of the dangerous volatile compounds in the atmosphere. Filters with natural absorbent filler retain up to 98% of toxic substances. Cheaper options contain carbon impregnation applied to corrugated paper in the cartridge design.
Electret – the filter element material is made of synthetic materials with static properties. This type of filtration is based on the electrical principle of capturing charged particles (for example, plant pollen or fungal spores). The efficiency is higher than that of paper, but it also does not cope with CO exhaust products.
Combined - a combination of coal and mechanical cleaning. Absorbent layers are enclosed between synthetic or paper fibers. The most reliable in terms of dust protection and toxic emissions purification.

Cartridges for replacing the cabin filter are standardized in almost all cars of the same class. For selection at Nissan Note, they use the original part number NP511-09312, or select an analogue according to the car’s VIN.

The service life of the original carbon filter on a Nissan Note is 30 thousand kilometers or about two years of operation. The frequency of replacement may be earlier if it gets exposed to moisture, an aggressive environment in the form of road reagents, or severe freezing at low temperatures.

Wear condition can be determined by appearance or poor filtration

During the summer season, when the air conditioner operates at increased loads, it is also worth paying attention to the wear and tear of the carbon fillers. The first sign of a deteriorating cabin filter is fogging of the windshield and side windows.

All types of filters cannot be cleaned - the cartridge is replaced completely assembled.

Replacement instructions

Cabin filter plug - installation location on Nissan Note is located at the bottom under the dashboard on the passenger side:

Pull out the housing together with the filter by snapping off the plastic protective cover:

The air duct must be cleaned using a vacuum cleaner:

Replace the filter with a new one:

Insert the cartridge into its installation position, snapping the cover on top until it stops:

The cost of a cabin filter for Nissan Note, depending on the type of membrane and design, ranges from 175 to 600 rubles. European brands are usually more expensive; analogues from a Korean manufacturer, which are not inferior in quality to the original ones, can be purchased at half the price.

When installing a combined filter, you should pay attention to the frequency of its replacement - in comparison with conventional ones, they fail much earlier

Work order

Nissan Note cabin filter replacement technology

The passenger door of the car opens, the passenger seat moves as far back as possible
The glove compartment lid is removed
Removing the cabin filter cover
The old filter is taken out; if necessary, dust residues are removed using a vacuum cleaner.
The machine is assembled in reverse order

The work on replacing the Nissan Note cabin filter is covered by a warranty. We always have original and non-original oil, air, fuel and cabin filters in stock.

You can get this service in our network of Nissan car services, just find the nearest one on the map and come!

Is it possible to remove the cabin filter for the winter?

It is difficult to make a final verdict. Many car owners claim that not only a regular filter, but even one with activated carbon, practically does not protect the car interior from the penetration of unpleasant odors, not feeling any difference when driving with or without a filter. The opinion of others is exactly the opposite, so the truth probably depends on many factors, from the design of the ventilation system to the operating characteristics of the vehicle. By the way, often replacing the filter element is not enough to eliminate persistent unpleasant odors - bacteria, especially in winter, thrive in the ventilation system. So, to completely destroy microflora, it may be necessary to completely disinfect the air ducts and stove radiator, as well as some air conditioner components, which also requires disassembling the panel. So the answer to the question of whether a cabin filter is needed in winter is ambiguous.

If you carefully monitor your health, it is better not to take risks. Although SF is unlikely to protect against cold viruses, it copes quite well with most other dangerous factors. If you are concerned exclusively with the financial background of the issue, then the situation here is not so clear. Frequent driving on dirty roads is indeed the cause of frequent clogging of the cabin filter, but rarely does anyone change them twice during the winter. So spending 300-800 rubles to ensure greater comfort is not a problem for most drivers, who spend the same amount daily on refueling their car. It’s another matter if the cabin filter causes the windows to fog up a lot in the cold season - here, dismantling it can actually solve the problem. If you spend 20-30 minutes every day warming up the engine and blowing the windows, then without SF this time can be significantly reduced. And the stove will heat up a little better, which for some car models is a very significant argument in favor of removing the filter.

In any case, the final decision remains with the driver.

Let's sum it up

A dirty filter can create trouble for the driver and passengers, not only in terms of an unpleasant odor in the vehicle interior, but also cause damage to human health, without clearing the air of harmful gases and dust.

Check the air purifier at least every thirty thousand kilometers. Remember that regularly replacing the product will free you from headaches and frequent radiator flushes.

Replacing a Nissan cabin filter is not particularly labor-intensive and can be done by the car owner independently, without the help of professionals.

If you find an error, please select a piece of text and press Ctrl+Enter.

What cleaning methods are there?

You can use professional services costing from 1000 rubles and above (up to several thousand at large and official service stations). You can also do the work yourself. In this case, you will get significant savings, but you will have to spend some time. To do the work yourself, you can use a complex mechanical cleaning method or a chemical option, which is faster and often very effective.

Mechanical intervention involves the following features:

dismantling the front panel of the car (needed in almost all models of modern cars);
removing the evaporator for its high-quality cleaning with professional compounds and products;
cleaning mold and bacteria in several stages, following the instructions of the product manufacturers;
installation of the product back into the air conditioning system, high-quality fastening in accordance with service instructions;
assembly of the interior, installation of the front panel, checking the functionality of the equipment and cleaning efficiency.

Of course, this method will be difficult to master with your own hands without help, since just the stage of removing the panel will require experience and skills, as well as professional tools. You will also need expensive chemicals that completely remove mold and mildew and help reliably clean all pathogenic microbes without leaving any residue. Otherwise, after a couple of weeks after completing complex work, you will have to repeat the procedure again.

Dry cleaning - how is it done?

The above brief instructions for mechanical cleaning of the air conditioner might upset you a little, since not every car owner can perform such work. But the chemical option for cleaning the air supply system from bacteria is available to everyone. To do this, you will not need to disassemble or remove anything, just choose the right product and use it exactly as the manufacturer recommends. Everything is very simple and clear.

Dry cleaning in most cases is performed as follows:

the car owner chooses an antibacterial agent to perform basic cleaning of the car air conditioner;
the car engine starts, the air conditioning system turns on at full power;
in the area of the air intake pipe (usually at the feet of the passenger or driver), a cylinder with the product is installed;
the car owner presses a button, the product is sprayed onto the air intake pipe and enters the system;
within 2-3 minutes the product operates and distributes throughout the air conditioning system;
Next, you need to let the car air out for about 10-15 minutes, and then the work is completed.

It is imperative to perform the procedure with a respirator and other protective equipment so as not to breathe in the antibacterial agent. It is also better to wear a rubber glove on your hand. Products are sold in different formulations, and some of them can have unexpected effects on the skin. This is a basic cleaning option, which is preventive and should be carried out at least once every 3 years, even without the presence of unpleasant odors from the air deflectors in the cabin.

Foam cleaning – when is it needed and how is it done?

In most cases, antibacterial treatment with a spray solves the problem of foul odors in the car. But in particularly advanced cases, such treatment does not always help. We have to turn to a more effective method of foam cleaning the evaporator. In this situation, a cylinder with a different composition is used - active chemical foam, which is supplied directly to the evaporator and into the air channels of the system.

The process looks like this:

it is necessary to get to the place where the air filter is installed and remove it to gain access to the evaporator system;
then a tube is put on the outlet of the foam container, which is designed to deliver the product directly to the evaporator;
all procedures are carried out with the air conditioner turned off, foam should fill all air ducts;
only 5-10 minutes after filling the system with foam, it is necessary to turn on the air conditioner at full power;
the last stage is high-quality ventilation of the interior for at least 15 minutes; this is an important part of the process.

Foam fills virtually all cavities in which pathogenic life can settle. So this method is considered the most effective and works great. But its effectiveness directly depends on the types of materials chosen. If the product turns out to be of poor quality, then the effectiveness of cleaning will be questionable.

Therefore, it is important to choose good products so as not to perform a difficult procedure again in the near future. If this method does not help, you will have to resort to mechanical cleaning.

Replacement instructions

Open the glove compartment and unscrew the three screws located on top.
We remove the glove compartment. Now you need to remove the valve, which you will see, to do this we squeeze out the clips and press them in.
The AutoFilter will be located on the left. Lift the holder up and immediately towards you, this way you will remove it.
Now insert the new one and secure it with the lock until it clicks.
Put the valve back on and screw the glove compartment back on.

This is how the filter under the glove compartment is folded

Next time you can try to remove it without removing the glove compartment, to do this you will need to crawl under it.

Which cabin filter to choose for your car?

Selecting equipment for maintenance is a real problem for the modern motorist. I want to use everything original that is exactly suitable for your vehicle. But such funds often turn out to be prohibitively expensive. And this leads to drivers starting to look for analogues. The situation in the market for analog parts is also difficult; dozens of different product features need to be taken into account. Here are just some recommendations for choosing:

it is worth choosing products of the middle price class, which are not excessively cheap; the most affordable filter parts most often do not last even 5,000 km;
give preference to manufacturers with a professional name, such as MANN, Knecht, Bosch, rather than unknown Chinese brands without a guarantee of quality and durability;
It’s worth buying a filter specifically for your car model, otherwise you won’t be able to install the purchased product into a clear groove in the body, you’ll just throw money down the drain;
carbon devices work great and purify the air better, but the overpayment is often not worth the money requested by the manufacturer, so this choice is entirely yours;
When purchasing, look at the quality of the surface finish - there are many fakes on the market in which the top part is easily broken through with a finger when pressed.

The better the quality of the filter element, the cleaner the air will be in your cabin. But most often it’s not worth buying the original. It is better to give preference to German filters with a quality guarantee. Most often, the originals are the same Bosch or Knecht, just with a different name. But it doesn’t make sense to pay 2-3 times more for a name. Therefore, when buying maintenance devices, be careful and do not waste money on something you don’t need at all.

How to choose the right filter

To replace the cabin filter of a Nissan Note 2008, you need to choose the right new working element. Since all models have different shapes and are not always interchangeable, it is worth choosing a modification specifically for your car. This will eliminate mistakes when choosing, even if you order an analogue.

Important! The most convenient selection option for a specific vehicle model is by VIN code.

Another scheme of actions is by year of manufacture, body and make. You can also compare the original item with the specifications of popular products from leading manufacturers.

If you have difficulty choosing, it is better to use the VIN code to search or contact the store manager for help.

The quality of its work largely depends on the material used to make the filtration element. Modern technologies can effectively retain the smallest particles, but too cheap filters only catch large ones. Solutions with a coal layer perform well.

Important! Single-layer paper clogs much faster than multi-layer products. The first option, accordingly, will have to be replaced more often.

Air purifiers

To choose the right air purifiers for your needs, you need to know their type and operating principle:

Electrostatic. Particles are attracted to the plates. Used to clean and improve indoor air quality. It uses the air that is already in the room without attracting it from outside.
Photocatalytic. The air passes through a photocatalyst, where harmful substances are oxidized and disintegrated.
Ionic. When air is ionized, allergens and harmful bacteria gather in clusters, become heavier and fall. Due to their weight, they can no longer remain in the air.
Filtering. The device is an electrical appliance equipped with a filter unit. Periodic cleaning of filters in air purifiers of this class will extend their service life and have a positive effect on the quality of air masses indoors.
Inertial. The inertia properties of particles are used, clean air passes through the filter when changing direction, and heavy particles fall into the dust collector.
Combined. Combines filter and inertial systems.