Removing and replacing the Hyundai accent air filter

For normal operation, the Hyundai Accent internal combustion engine requires a large amount of fresh air.

But to prevent foreign impurities in the form of road dust from getting inside the cylinders, an air filter is otherwise used. It is necessary to replace it every six months or 10 thousand kilometers.

Replacing all filters Hyundai Accent photos

Replacing Hyundai Accent filters is required at different vehicle mileage.
Typically, replacing filters does not require special knowledge and skills. But this does not mean that this should be taken carelessly. After all, the durability of components and assemblies, primarily the engine, depends on filters. After all, the engine air filter does not allow dust to pass through, which will quickly lead to wear and tear of the combustion chamber. The fuel filter traps dirt particles. which can easily reach the injectors through pipelines. The oil filter ensures the cleanliness of the oil on which the engine runs. Next, we suggest that you familiarize yourself with the official regulations for replacing various filters for the Hyundai Accent.

Engine oil and oil filter - 10,000 km (or after 12 months)
Fuel filter – 10,000 km (or after 48 months)
Engine air filter – 40,000 km (or after 36 months)
Automatic transmission oil and filter – 90,000 km (or after 72 months)

We have already written about replacing the Hyundai Accent fuel filter.

To replace the air filter you will have to spend a couple of minutes of your time. We open the hood, next to the fuse block and battery we see the air filter housing. The casing cover can be easily removed, just unclip the 4 spring latches, remove the old filter and insert a new one. Actually, you don’t even need tools, except your hands, of course. Photos are attached below.

It’s impossible to imagine a simpler process.

The oil filter is replaced simultaneously with the oil change. In order to unscrew the filter, you will need to remove the engine protection (if equipped). The Hyundai Accent oil filter is located under the generator on the side of the engine cylinder block. Photo for clarity below.

, a cabin filter was also installed . Replacing or installing a cabin filter on this car is not difficult. Please note that the original filter consists of two parts that are inserted in a certain way.

To replace the filter, you will have to unscrew the glove compartment and get to the casing of the heating and ventilation system located under the dashboard. To remove the glove compartment, press along the edges, bend it, and if it annoys you, finally remove it by unscrewing two bolts with a Phillips screwdriver.

To open the compartment where the filter should be located, it is necessary to remove the rod, which greatly interferes with us. Here she is.

Now carefully remove the plastic plug by pressing the latch on top (the main thing is not to break it).

Now you can install a new filter consisting of two parts. You can only insert a filter in a certain way

The shape of the outer frame of the air filter is quite specific, but also pay attention to the air direction arrows. Now we put the plug and rod in place and screw the glove compartment on. Everyone can enjoy the fresh air.

There is no exact data on the frequency of replacing the cabin filter on the Accent, because it all depends on many factors. If you drive on dusty dirt roads every day, your filter will become clogged after 5-6 thousand kilometers. If the environment is not very polluted, then the filter can travel for more than tens of thousands of kilometers. In any case, it is better to periodically check the filter for contamination and change it as necessary.

The importance of performing routine filter element replacements

Of course, all of the above advantages of cars equipped with a cabin filter will be lost if it becomes clogged, and this process, unfortunately, is inevitable. As mechanical particles settle in the pores of the cleaning element, its throughput will gradually deteriorate, and the shortage of air entering the cabin will affect the reduction in the efficiency of the climate system as a whole. The rate of filter contamination depends on many factors - road conditions, preferential operating conditions of the vehicle, driving style, driver discipline, etc.

Because of this, the replacement of the Hyundai Accent cabin filter recommended by the manufacturer can be carried out at a time that differs from that specified in the manual. This is especially true for the warm season, when the air is much more polluted than in winter. That is why many experts say that the optimal time to perform this operation is the beginning of spring. It is during this period that plants actively flower and release pollen, which is enemy number one for allergy sufferers. A clogged filter is capable of accumulating such allergens, and instead of having a protective function, it will become a threat to passengers belonging to this category of the population.

Untimely replacement of the Hyundai Accent cabin filter is fraught with other troubles - the appearance of unpleasant odors in the cabin, frequent fogging of the windows even in clear and dry weather, and a decrease in the efficiency of airflow from the deflectors when the fan, car air conditioner or heater is on. It is these symptoms that should serve as the main sign that it is time to solve the problem with a dirty filter element.

How to change the air filter on a Hyundai Accent with your own hands

Hyundai Accent (correct spelling - Hyundai) is an inexpensive and convenient car, which was produced by the Taganrog Automobile Plant from 2001 to 2012. And it is very common in Russia and its neighboring countries. Therefore, questions about maintenance of this vehicle are asked regularly. And one of these questions concerns replacing the engine air filter.

Reasons for replacement

To understand why an air filter is required in a car, you need to understand the basic principles of operation of an internal combustion engine. For the engine to operate, a fuel-air mixture consisting of air and atomized fuel is required. The principle works for all piston internal combustion engines - diesel, gasoline and more exotic options (for example, alcohol engines). And the air entering the power plant must be filtered from excess impurities - dirt, dust, oil splashes, etc. Otherwise, foreign elements will enter the engine and lead to its breakdown.

The air filter allows air to enter the engine in an already purified form. But during operation, the described spare part loses its throughput due to contamination. This affects the operation of the engine: the amount of incoming oxygen decreases, the fuel mixture ends up with an excess amount of gasoline (or diesel fuel), which does not burn during operation of the power plant. As a result, fuel consumption increases, engine power decreases, and environmental pollution increases. In advanced cases , the engine wears out faster, which leads to unplanned and expensive repairs.

To avoid the described troubles, the car owner should know the signs that indicate the exhaustion of the air filter resource and the need to replace it. There are two main signs:

engine power decreases, it is difficult to start and runs intermittently;
When disassembling the air filter housing, you can see that its working surface has changed color. In normal condition, the air filter is white or cream. When the resource is exhausted, the spare part turns gray (in advanced cases, the color becomes coal black).

In this case, you have to purchase a new air filter to replace it. This applies to every car, including the Hyundai Accent.

Choosing an air filter for Hyundai Accent

When choosing an air filter for a Hyundai Accent, it is worth remembering that there are a total of five generations of the described model . Each generation has its own design features. And, importantly, in certain cases they require different filter options. Example: replacing the air filter on a Hyundai Accent 2008, 2012 or 2004 is carried out according to the same principle. But the suitable spare parts models for them vary. For the 2008 model, SK SpeedMate SMAFK0030 and its analogues are suitable, for 2004 cars, SK SpeedMate SMAFH0007 is suitable, and for the 2012 Hyundai Accent, Mann C 02775 is installed.

If funds are available, it is recommended to use original spare parts - for example, for the already mentioned 2008 version, Hyundai/Kia 0281131G000 is suitable. This type of air filter is slightly more expensive, but it is guaranteed to fit the car model you are using. If there is no suitable spare part, an analogue is selected - for each model there are 10 or more of them.

But the question often arises - how to choose the right air filter for a beginner who does not know what exactly he should look for in the spare parts market? The first thing you should do is look at the vehicle’s service book (also called the vehicle’s operating manual). The name of the original model of the air filter is indicated here (not to be confused with the cabin filter!). And then a model of a similar type, available in a certain region, is selected. Another way is to disassemble the housing of the air purification system entering the engine and look at the markings of the air filter. And then choose and purchase a suitable analogue.

When purchasing a filter, it is recommended to measure its dimensions in advance - in certain cases, you come across models that look the same, but differ in size. It is not recommended to purchase spare parts secondhand - a number of dishonest traders sell pre-cleaned used filters. Such a part does not have a sufficient level of air permeability. It is worth mentioning air filters with zero resistance . They are characterized by improved air passage, which increases engine power. But the increase on a standard car is imperceptible, and the cost of a “nulevik” is an order of magnitude higher than a standard spare part.

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Hyundai Accent II LC heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Windows often fog up;
the appearance of unpleasant odors in the cabin when the airflow is turned on;
deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection.

2 elements with dimensions:

Height: 12 mm
Width: 100 mm
Length: 248 mm

As a rule, sometimes analogues for the Hyundai Accent II LC may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all second-generation Hyundai Accents (including the restyled version), the manufacturer recommends installing a cabin air filter with article number 97617-1C000 (976171C000). But you can also install the original analogue with number 97617-1C001, the dimensions are the same, the width and height are the same.

The salon in this model is composite and consists of 2 parts. They are completely identical in size, the only difference being the so-called tongue-and-groove system on the side plastic edges.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

Replacing the air filter on a Hyundai Accent yourself

For a beginner, it is not difficult to change the engine air filter on an accent - the sequence of actions is very simple, and no additional tools are required. Of all the stages, the most important is the correct choice of spare parts . But the principles of choice have already been described in the previous paragraph. Now we need to describe the remaining stages of replacing the air filter.

First you should find the actual car air filter housing . It doesn’t matter whether this Hyundai Accent was produced at the TagAZ plant, abroad, or what generation it is: under the hood of the car, the owner will find something like this:

The air filter housing is outlined in red . It may differ in different models, but the approximate location does not change. Additional tip: two corrugated air supply hoses are always suitable for the housing. One goes to the engine (more precisely, to the carburetor), and through the second oxygen enters from the outside.

itself can be replaced with your own hands, without using additional tools . The top cover is secured with special latches. Usually there are only four of them. The latches are unfastened, the cover is removed, and the owner has access to the engine air filter. The part is not secured in the housing and is pulled out manually. Before installing a new air filter, it is recommended to clean the inside of the housing (blow and wipe with a dry cloth or cloth). The part is then replaced and the above procedure is performed in reverse order.

Air filter oil accent

If you notice that your air filter is in oil, you need to check the condition of the engine or contact a car service center.

Reasons for oil appearing on the air filter:

The filter is clogged, the engine does not have enough air due to which it is sucked from other places - for example from the crankcase
The oil deflector drain is clogged. As a result, excess oil cannot return back to the crankcase and exits along with crankcase gases.
The hose or channel through which crankcase gases exit the throttle is clogged
The piston rings are stuck (wear) as a result, oil from the cylinders penetrates into the crankcase and then enters the filter

If you detect oil in the air filter, it is best to contact a car service center for help.

Replacement frequency

One of the most important questions asked by Hyundai Accent owners is how often does the engine air filter need to be replaced? And here a lot depends on the conditions of use of the car. The average filter life ranges from 15 to 30 thousand kilometers. But in conditions of dusty and dirty roads, this figure decreases somewhat. It is also worth remembering that in diesel engines, the operating time of one air filter is reduced by 20-30%. On average, it is recommended to check the condition of the filter every 10 thousand kilometers.

If the car is used in off-road conditions (although it is not suitable for such conditions), then the check should be carried out every 5-7 thousand kilometers to avoid breakdowns and unwanted repairs. Separately, it is worth mentioning the situation with the purchase of a used Hyundai Accent. In this situation, the condition of the air filter is checked immediately so that the new owner of the car does not have any unpleasant situations later.

Air filter for Hyundai Accent and its replacement interval

Hyundai Accent is a very common and popular car brand. In many countries, the brand is recognized as “national”, despite differences in the names used, for example, Verna or Excel.

An important parameter for choosing an air filter will be the year of manufacture of the car. The Hyundai Accent brand of different generations will have some design features in the design of the air system. Hyundai Accent has been on the Russian market for quite a long time, from 1995 to this day, the production process has been improved, and air systems and filter elements are also improved and modified.

The air filter installed on a Hyundai Accent car, starting in 1995, has changed only in shape and location. Its appearance will depend on the years of manufacture and engine sizes. So, in cars with a 1.3-liter carburetor system, one type of filter was installed, but on a 1.5-liter injection engine, a completely different one was installed.

From 1999 to the present day, Hyundai Accent car models have been produced with both SOHC carburetor engines and SOCH and DOCH injection engines. Regardless of the assembly, be it Korean or Tagazovskaya, the air filters on them are of the same type and are suitable for cars of any assembly; attention should only be paid to the engine size.

The air filter replacement interval for a Hyundai Accent, according to the manufacturer's recommendations, is considered to be from 10 to 20,000 km. If the vehicle is operated in conditions of severe air pollution and dust, then the interval is significantly reduced, by about 1.5-2 times. If deformation or other damage to the filter element is detected, it must be replaced regardless of mileage.

How to change the air filter on a Hyundai Accent yourself?

First, you need to purchase a new air filter, its average price will be about 500 rubles. You will not feel a big difference in the behavior of your car, so the manufacturer will not play an important role in your choice; you can safely focus only on the price that is acceptable to you. After choosing and purchasing, you can begin replacing.

Open the hood. Disconnect the negative terminal from the battery. The air filter housing is a black, plastic box located to the right, next to the fuse box and battery.
To replace the air filter element, you will need to unfasten the 4 spring fasteners located on the sides of the air filter housing.
Lift and slide the top housing cover and remove the old filter element.
Wipe the inside of the filter housing with a damp cloth and carefully install the new filter element.
Start collecting everything in the reverse order of disassembly.
When installing the air filter housing cover, snap the spring clips into place and be extremely careful not to apply too much force. Upon completion of work, make sure that the filter is installed level and the housing cover is tightly closed, and its edges fit snugly around the entire perimeter.

Replacement process

In order to replace the air filter, you do not need any special tools. Standard set of keys and sockets, as well as 15 minutes of time. And so we proceed directly to the replacement itself:

First, we find the air filter housing in the engine compartment.
Disconnect the 4 latches that secure the air filter cover.

Now you need to remove the screws by first unscrewing them.

We lift the air filter cover, and in the housing we can see the filter itself.

With a slight movement of your hand, remove the filter from its seat.

We install a new filter element into the seat.

Put the filter cover on and tighten the screws.

Important!

When replacing, you should pay attention to the metal spring latches on the sides of the filter housing, which are held onto plastic parts. Over time, the material gets tired and wears out, which can lead to breakage. Be careful when replacing.

Do not start the engine if the air filter housing is removed or the filter element itself is missing. Such carelessness will lead to particles of dust and dirt getting into the working cylinders of the engine, which can lead to rapid abrasive wear of all its components.

A substandard, defective or overly contaminated filter element leads to a significant decrease in engine power, as well as rapid wear of engine parts.

Air filter element

The air filter is designed to purify atmospheric air, which participates as an oxidizer of the air-fuel mixture burning in the engine cylinders. All air filters can be divided into classic and others.

A classic air filter element will have the appearance of an accordion made of filter paper with special seals along the edges to prevent unfiltered air from entering the engine.

Another category of remaining filters includes air filters for “sports” cars, filters with “0” resistance, “labyrinth” and other similar examples. These types of air filters are more suitable for self-tuning a car, in which manufacturers of such products claim an incredible increase in engine power.

The air filter is designed to clean the air used by the engine during operation. And replacing the filter element is perhaps the simplest operation that you can do yourself.

Design features of air system elements

The material for the air filter housing is plastic. On the sides of its surface there are clips, such as spring latches, to facilitate removal of the air filter.
Two pins, with rubber tips of the bracket going inside, are located on the bottom of the block, and the black box itself is secured with a rubber tape.
The air meter is located on the air filter housing, enclosed in a lightweight metal housing and secured with spring latches.
The air intake hose is attached to the filter with a clamp, and the outlet hose connecting the suction chamber and the air meter is also attached.

Air filter for Hyundai Accent

For normal operation, the Hyundai Accent internal combustion engine requires a large amount of fresh air.

Filter selection

It is worth remembering that the choice of filter should be taken seriously, since these are the lungs of your power unit. According to the regulations established by the manufacturer, the engine filter element must be changed every 10-15 thousand kilometers. Also, which manufacturer recommends changing the filter twice a year, in spring and autumn.

The original catalog number is 2811322600 . The cost is 600 rubles.

Analogues recommended for installation:

Manufacturer's name	vendor code	Cost in rubles
Fram	CA3997	500
MANN-FILTER	C 2562	600
Misfat	P287	600
Muller filter	PA332	600
Mahle/Knecht	LX 336	600
Denckermann	A140091	600
Comline	CHY12230	700
Purflux	A303A	800

Which air filter to choose

Purchasing and replacing an air filter for this car is not difficult. But before replacing, you should purchase a new one. It should be noted: the auto parts market offers a wide selection of different filter models. This is what sometimes causes difficulties. All presented products can be divided into 2 main categories:

original;
analogues.

Each option has its own advantages and disadvantages. It is advisable to avoid purchasing products from little-known manufacturers and at automobile markets, from sales stalls.

Original parts

Using original components from General Motors (the official supplier of the Korean automaker Hyundai) is the optimal solution. Original parts undergo quality control and pre-sale inspection. The likelihood of purchasing a low-quality product tends to zero.

The only negative is the relatively high cost. and the difference in price can be 2-3 times.

Name	vendor code	Cost, rubles
General Motors	C 2775	From 500

High-quality analogues

It will not be difficult to find high-quality analogues of air filters for the vehicle in question on the market. But it should be noted that when choosing, you need to be as careful as possible. There are many low quality products on the market. The choice should be made in favor of well-known, well-established manufacturers. For example, Bosch, Parts Mall.

Their cost is slightly higher than no name products. However, they last an order of magnitude longer and filter the air flow well. It is advisable to familiarize yourself with all the subtleties and nuances of installation in advance. Often the air filter (non-original) simply does not fit into the housing under the hood of the car. I have to trim it.

All this takes time and causes inconvenience. Therefore, before purchasing, it is advisable to measure the already installed filter (with an accuracy of 1 mm) and purchase a similar one. Otherwise, the lid simply won’t close or the ribs will get jammed. Which will lead to deterioration of air flow. Counterfeits are often made for reputable manufacturers.

The main signs of fakes:

poorly printed font;
faded, faded colors on the packaging;
no holograms.

It is worth purchasing parts from reputable automotive stores. High-quality analogues of air filters:

Manufacturer's name	vendor code	Price, rubles
NAC	7718	From 200
FORTECH	FA004	From 250
ONNURI	GFAH008	From 400

When to change, what interior to install

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Windows often fog up;
the appearance of unpleasant odors in the cabin when the airflow is turned on;
deterioration of the stove and air conditioner;

Suitable sizes

2 elements with dimensions:

Height: 12 mm
Width: 100 mm
Length: 248 mm

Selecting an original cabin filter

The salon in this model is composite and consists of 2 parts. They are completely identical in size, the only difference being the so-called tongue-and-groove system on the side plastic edges.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

Which analogues to choose

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original second-generation Hyundai Accent cabin filter may turn out to be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

Mann Filter CU 2506-2 – high-tech consumables from a well-known manufacturer
BIG filter GB-9839 – popular brand, good fine cleaning
Nevsky filter NF-6159-2 - Russian manufacturer with an affordable price

Carbon cabin filters

Amd FC17C – high-quality and thick carbon coating
BIG filter GB9839/C – activated carbon
Nevsky filter NF6159C-2 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

Corteco
Filtron
SCT
Sakura
GoodWill
Fram
JS Asakashi
Champion
Zekkert
Masuma
Nipparts
Purflux
Knecht Mahle
RU54

It is quite possible that sellers may recommend replacing the Accent II LC cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

Procedure for replacing the air filter on a Hyundai Accent

Before starting work, be sure to disconnect the battery terminals. Only then start. Before starting work, you need to prepare everything you need:

mittens or gloves - to protect the skin of the hands;
vacuum cleaner;
screwdriver (phillips and slotted);
set of open-end wrenches.

Replacing the air filter includes the following main steps:

You need to carefully unfasten the 3 metal latches that hold the top cover in place;

using keys or a screwdriver, unscrew the clamp that supplies air inside the air filter housing;
the corrugated rubber pipe is carefully removed to the side - it will be inconvenient to remove the top cover;
lift the cover of the plastic case;

Carefully remove the old filter.

After removing the old filter, you must carefully blow out the housing with a compressor or clean it with a vacuum cleaner. It is advisable to carefully clean off all dust. This is the only way to avoid rapid clogging of the newly installed filter. Some car owners simply do not want to purchase new filters - they simply wash the old ones with special cleaning agents or plain water.

It is important to remember: the cause of poor air flow is not only the presence of a large amount of dust. Over time, the material from which the filter is made gradually wears out, becomes denser, and its pores become clogged with dirt. Which leads to a significant deterioration in air circulation. Even a well-washed new filter can cause increased fuel consumption and uneven engine operation.

For normal engine operation, the manufacturer recommends changing the air filter as often as possible. This will avoid increased fuel consumption and other problems. The cost of consumables rarely exceeds 200-300 rubles.

New reviews about car services (replacing the Hyundai accent engine air filter) in Moscow

Excellent service - the specialists are all Russian, the prices are very reasonable, I am satisfied.

It was November 8, 2022, a diagnostic of the spar was required, they checked it quickly, found a little rust, sanded it down, treated it with a converter, coated it with anti-corrosive and painted it on top in body color, excellent quality, price was great.

A disregard for clients, in general, this is more a problem of the administration than of the craftsmen. In general, be prepared for rudeness

They don’t know how to serve what is stated here

Signs of clutch malfunction and breakdown

There are several main signs of problems with this mechanism on a Hyundai Accent:

slip;
jamming;
switching on jerkily.

All this is accompanied by a characteristic grinding and crackling sound in the clutch area. It becomes extremely difficult to change gears, vibrations appear, and the car's dynamics drop. In some cases, the smell of burnt friction linings is felt.

The wear of the release roller can be determined by the characteristic sound - rustling at idle.

A damaged input shaft bearing has a similar symptom. To accurately identify a malfunction of the clutch release element, you need to start the engine and set the gearshift lever to the neutral position. Then open the hood of the car and attach a pry bar to the connecting plug at one end. If, after pressing the mechanism towards the engine, the noise disappears, and when released it increases again, this will indicate damage to the release mechanism.

Features of clutch replacement

Replacing the clutch on a Hyundai Accent is a very labor-intensive operation that involves hanging the engine and gearbox. In Moscow and other large cities there are specialized car services ,

where there is a lift, pit and other necessary equipment.

Important features you need to know about.

It is necessary to use a special mandrel to center the driven disk, otherwise the box will not fit into place - the usual VAZ mandrel is not suitable here.
Removing the starter is somewhat difficult. To gain access to the starter bolts, you need to remove the cable fastenings. The cables themselves can be hooked onto the vacuum brake booster.
The release bearing on this car is mounted on a short bell-shaped guide. If the bearing wears out due to heavy load, the Hyundai owner will face repairs at a high price. The guide itself will need to be changed.
The clutch on the Accent is installed in the crankcase, connected to the cylinder block and gearbox. The basket is connected to the flywheel using 5 bolts. The latter is equipped with three pins, which, when installing the coupling, enter the structurally provided holes in the casing (basket). Thus, centering occurs.
The pressure plate is fixed to the basket by three pairs of elastic steel plates. Replacement of the casing is recommended if there is significant settlement of the diaphragm spring and severe wear of the drive disk and petals to a depth of more than 0.8 mm. However, due to the complex process of removing the transmission on a Hyundai Accent, it is recommended to replace the entire clutch kit, including the discs and release bearing.

The work time depends on the type of mechanism installed on the Hyundai Accent. If this is a regular mechanism, then the repair will take about 1 hour.

How to change the cabin filter on a Hyundai Accent

To gain access to the installation location of the filter element, it is necessary to remove the glove box. To do this, we take out and put aside all its contents, after which, without applying excessive force, we press on the side panels to disengage them. Since the walls of the glove compartment are quite flexible, you should be careful not to break the fragile plastic.

The vertical pillar, which becomes accessible after removing the glove box, is a cover that blocks access to the cabin filter, so it must be removed. To do this, move the flap used when turning on the recirculation mode to the side. Further actions must be performed without relying on vision: in the formed niche, by touch, we find the lever located directly above the SF cover, carefully pull it towards the passenger seat.

Since the lever is also quite fragile, and we do not visually control our actions, we also perform this operation very carefully, without excessive fanaticism. As soon as the fastening is released, remove the cover by pulling it up and opening access to the cabin filter.

We take it out, trying not to make sudden movements - a lot of dust and debris has accumulated on it, which can get into the air duct, which is extremely undesirable. If the filter consists of two halves, first remove the upper one, then the lower one. At the same time, we do not throw away the filter elements - they will come in handy if you want to make a new filter yourself (saving almost half the money). After the cabin filter on the Hyundai Accent is removed, you can begin installing a new one - it doesn’t matter whether you purchased it in a store or made it yourself. We perform all operations in reverse order. Installation of a two-component filter element requires that the recess on the frame wall should be located at the bottom and the protrusion at the top. Therefore, we first insert the lower half of the cabin filter, then the upper one.

Particular attention should be paid to installing the SF cover in its original place - if handled carelessly, it can easily be broken, which is the sin of inexperienced beginners. This is done in the following order: first we fix the lower lock, then we snap the upper one, without applying excessive force. If the top lock does not latch, there is no need to press harder - check whether the bottom lock is inserted correctly, this is usually where problems arise. Checking the correct installation of the cover is done as follows: carefully pull it towards the passenger compartment, applying force at the attachment point of the recirculation flap. If the top part of the cover does not move, you can proceed with the installation of the rod and the glove box, not forgetting that its sides are quite fragile.

Hyundai Accent clutch replacement procedure: step-by-step instructions

The work will require several sizes of wrenches: 12, 14 and 17. You will also need sockets, a wrench with an extension, and a dynamometer. As mentioned above, a special type of mandrel will be required.

Removing the clutch

The machine must be installed on an overpass, inspection pit or lift. Further actions:

drain the gearbox oil;
remove the battery along with the tray;
release the air filter housing with the air supply hose to the throttle;
unscrew the clutch drive from the engine compartment;
release the gear selection cables from under the car - move the bracket with the cables to the side;
dismantle the slave cylinder of the clutch mechanism, move it to the side - do not touch the tubes;
disconnect the wiring from the reverse light switch;
provide full access to the checkpoint, removing all unnecessary;
remove both upper gearbox mounts;
pull out the mudguard;
Unscrew both outer front wheel drives;
remove internal grenades;
remove the left engine support, disconnect the bracket from the gearbox;
separate the plastic wiring harness holder;
remove the upper and lower crankcase covers;
remove the starter;
suspend the motor or install an adjustable stop under it;
remove the other two engine mounts along with the brackets;
separate the gearbox from the power unit by unscrewing the lower fixing bolts - move the box to the left and place it on the stop;
unscrew the bolts connecting the casing to the flywheel;
pull out the basket with the disc.

The release bearing is located on the clutch fork. To remove it, you need to remove the boot and rotate the fork - be sure to press with your hand on the sides of its internal spring. Then remove the element along with the rubber gasket.

Installation

Before reinstallation, the basket must be centered relative to the disk and shaft bearing. The mandrel is removed at the very last moment, after all the casing bolts are tightened to the final torque.

before installing the gearbox, apply a thin layer of tripoid grease to the splined part of the basket and input shaft;
the new disk must be placed with the convex part towards the basket;
the basket bolts are finally tightened with a dynamic wrench with a torque of 22 Newton per meter;
New fluid must be filled into the gearbox.

Flywheel check

If there are blue spots on the flywheel, this is a reason to measure the runout. You need to make sure that the working surface of the part (mirror) is not damaged. To correctly carry out a measurement, you need a homemade dial indicator on a tripod or other device. It is attached to the flywheel, then the engine is rotated clockwise. At the same time the scale is controlled. The permissible runout is no more than 0.1 mm.

Useful recommendations for spare parts

Here are the clutch parts that fit the Hyundai Accent in terms of diameter and part numbers:

on models up to 2005 - disc 200 mm 41100-22705, basket 200 mm 41300-22660, release 41424-28000;
on models after 2005 - disc 215 mm 41100-22750, basket 215 mm 41300-22710 and release lever 41424-28000.

When replacing the clutch on a Hyundai Accent, you need to be extremely careful. When friction linings wear, asbestos dust is formed, which is very dangerous for car mechanisms. It is prohibited to wash it off with gasoline or solvent! Only industrial alcohol should be used.

Choice of SF Hyundai Accent

The first generation Accent, produced during 1999-2005, was equipped with a filter with article number 97617-1C000, which consisted of two rectangular filter elements that were placed one above the other. Each of them was equipped with its own frame, which was complemented by a handle that made it easier to pull the product out of the compartment. Since 2005, the Accent has been equipped with a regular single cabin filter (article 97133-1E100), albeit without a frame. For this reason, replacing the Accent Tagaz cabin filter is much easier, although the niche for the filter and the total dimensions of the single and dual cleaning elements are the same.

The double filter is generally a unique design solution. Forced, since it is extremely difficult to install a whole product on first-generation cars, but separately they become quite simple. One way or another, original cabin filters are rarely purchased today, preferring cheaper options from well-known manufacturers of similar products. In particular, for Hyundai Accent produced before 2005, the following products can be considered a good alternative:

Nevsky filter (article NF6159/2);
TSN (article 9.7-13);
Finnwhale (item AS738);
Kolbeschmidt (item 50013894).

For cars that came off the assembly line after 2005 (Tagaz assembly), the following filters will be suitable:

Nevsky filter (article NF6425);
Champion (item CCF0186);
TSN (article 9.7-547);
Finnwhale (item AS742).

Unfortunately, domestic dealers specializing in sales of Hyundai Accent often practice pre-sale preparation without installing a cabin filter on the car. Apparently, believing that this part can hardly be called in demand among drivers. About ten years ago, it really was a novelty, and car owners did not see the benefits of owning it, considering the troubles of replacing it burdensome. Today the situation has changed diametrically - no one wants to breathe dirty air with unpleasant odors, so configurations with a missing filter are becoming unpopular.

The place behind the glove compartment, where the cabin air filter is located on the Hyundai Accent, is standard for many brands and models of cars, so there are usually no problems with dismantling the old and installing a new product. As for the filter itself, some car enthusiasts prefer not to buy a finished part, but to make it themselves. As a rule, the quality of such a product is not much inferior to the factory one, but in terms of cost, this option is clearly preferable, especially if the owner of the car loves and knows how to do repairs without resorting to the help of professionals.