Setting sport grant thresholds


Lada Granta was developed on the basis of the previous model Lada Kalina; the first front-wheel drive sedan entered the market in 2011. The budget car attracted attention with its reliable chassis assembly, efficient engines and updated body. The standard plastic protection for the thresholds of the Lada Granta was made of a durable polymer composition.

In 2022, a planned modernization of the family took place. The extended series included hatchback and station wagon models; after restyling, the equipment was called LADA Granta FL (facelift).

Types of door sills for Grants

The factory lining of the Grant's thresholds is made of plastic; the linings protect the interior of the cabin from moisture and do not allow the floor covering to quickly get dirty. For the power threshold, as a sidewall element, the plastic lining serves as additional protection against mechanical damage and reduces the rate of corrosion propagation. The average service life of standard parts is 1.5-2 years. In addition to a short service life, factory linings do not provide the car with individuality. Drivers prefer to tune the Lada Granta to their liking. Common types of cladding:

  1. Plastic longitudinal linings.
  2. Plastic or metal body kits.
  3. High strength steel linings.
  4. Decorative overlays made to order.

Metal door sills or an aluminum profile, in addition to their decorative function, increase the overall rigidity of the body by up to 12% and are considered as additional strength elements. The cladding can be painted or chromed. They are distinguished by a long service life, at least 5 years, and protect the bottom from corrosion when installed correctly.

Plastic body kits and trim panels have affordable prices and come in a variety of shapes. The Fast and the Furious pads are made of ABS plastic and are most popular among Granta owners. The parts are manufactured strictly to the dimensions of the Lada body, have a long service life of up to 3 years, and have an original shape. The covers are easy to install yourself. In case of a mechanical shock of medium strength, if there is no rupture of the paintwork, the part can be easily straightened with improvised means.

Plastic panels ensure the cleanliness of the interior; they are installed on the standard threshold using screws or using glue. The panels prevent the anti-gravel from quickly crumbling and ensure the aesthetics of the interior.

Review of prices for original thresholds and their analogues for the Lada Granta Liftback

Article/index OEMPrice in rubles per unit
Original (Sedan, Liftback)
Lada 99999219004200from 350
Lada 999992190042/24—/—
Lada 999992190042/27—/—
Lada 999992190042/42—/—
Analogs
Stainless steel9999921924from 1600
Polished steel LAGR.31.3772from 2500
NP.6002.3 (stainless)from 1600
LAGR.31.3773 (engraving, drawing)from 2000
NPLAGRA011from 1600

*prices are current as of 10/01/18.

Why are internal door sills needed?

In addition to decorative functions, the sill lining of the Lada Granta serves as protection, namely:

  • does not allow moisture and dirt to pass between the power threshold and the bottom;
  • allows you to protect the inside of the box from rust;
  • protects the floor covering from premature wear.

The carbon element ensures a tight fit of the door and increases the service life of the rubber seal.

Before choosing an interior panel, you need to evaluate the operating conditions of the car. If frequent trips over rough terrain are not expected, then it is recommended to choose plastic body kits. When a car is often driven outside the city, steel linings are chosen, which wear out and deform minimally.

Sequence of actions when setting thresholds

  1. We place the car on a level platform, open the doors, and begin dismantling work.
  2. We start with the driver's door, unscrew the four standard screws from the trim, and remove it.
  3. We insert polymer pistons into the holes, they fit perfectly.
  4. We apply the threshold and screw it with self-tapping screws.

Related link:
Features of replacing the timing belt Lada Granta liftback (8, 16 cells) with your own hands

When it comes to installing stainless steel trims and decorative inserts on the outer threshold, we use double-sided tape instead of screws. We pre-treat the surface, remove dust, dirt, and moisture.

Some service stations and tuning studios practice fitting metal onto self-tapping screws, but not every owner agrees to drilling a number of through holes in the car. By analogy, we complete the installation on the remaining sections of the thresholds.

Do-it-yourself installation of plastic thresholds on the Lada Granta

AvtoVAZ offers standard linings for all Grant trim levels. The cladding is a panel made of ABC plastic, the kit includes: a set of clips and self-tapping screws. Catalog numbers for original spare parts:

  • 1118-5109078 and 2170-5109078 – rear right panel;
  • 1118-5109079 and 2170-5109079 – left;
  • 1118-5109076 – front right trim;
  • 1118-5109076 – front left.

The rear panels are equally suitable for Grants and Priora, Kalina. Spare parts can also be used for VAZ 2108, 2109 models.

Self-installation takes up to 20 minutes per threshold and does not require special equipment. tool. To work you will need:

  • set of overlays, cost of original replicas from 500 rubles;
  • crosshead screwdriver;
  • 18 self-tapping screws with a length of at least 3 cm;
  • plastic clips – 18 pcs.;
  • knife, flat screwdriver.

Experts recommend preparing more clips, since the fasteners are consumer goods and often do not meet the requirements; when screwing in a self-tapping screw, every fifth clip cracks.

The process of replacing a simple threshold trim step by step:

  1. Pull the door seal out of its seat near the threshold.
  2. Attach the standard carpet to the thresholds using steel brackets. Using a knife or flat-head screwdriver, carefully bend and pull out each bracket.
  3. Bend back the standard carpet, pull out the standard threshold.
  4. Check the condition of the bottom, if there is rust, correct the defect.
  5. Insert plastic clips into the rectangular slots; there are a total of five holes for clips around the perimeter of the front door threshold. The hole, which is located vertically under the panel, comes from the factory with a plug already installed.
  6. Use a knife to make holes in the carpet in the area of ​​the installed clips, make sure that the slot is rectangular and of a suitable diameter, the clip should completely fit through the carpet with its top.
  7. Install the door seal in its original place.
  8. Attach a new threshold, try on the combination of screws and clips.
  9. Screw the screws into the clips. The first screw to be screwed is the self-tapping screw, which is aligned with the stand. Do not over-tighten the bolt as this may damage the plastic clip.
  10. Screw all the screws halfway, gradually pressing the panel against the threshold.

Installation of the trim under the remaining doors is similar.

An accessory such as body kits or plastic sills, which are installed on the Granta for painting, can be additionally tuned with linings to protect the interior from dirt and sand. The principle of installing plastic removable thresholds differs from installing linings; repairs can be done independently. For installation, choose stickers or metal plates for self-tapping screws.

We install internal thresholds on the Granta

Let's see how you can install internal thresholds on the Lada Granta. As usual, let's look at the modification using the example of a specific car enthusiast and car.

The author of the material says that he likes “Granta” itself, and it suits him quite well. The car cannot be compared with the VAZ classics, or even with many front-wheel drive models produced by the domestic auto industry.

This applies not only to the technical characteristics, but also to the appearance of the Grant. True, there is still something to work on, and the car gives tuning lovers many opportunities for this. But today we are not talking about external tuning, but about internal tuning - this is where the installation of internal thresholds can be attributed.

If it’s raining or slushy outside, getting into the Granta will inevitably stain the carpet. In addition, moisture also gets inside the cabin. The owner says that although he purchased the car recently, he has already completed anti-corrosion treatment of the body. However, moisture inside is still an undesirable phenomenon. Therefore, I went to the nearest car market and bought Kalina door sills there.

There was nothing complicated about their installation and the process did not take much time. True, in order for the final result to be pleasing, I had to tinker a little. First of all, remove the seal. When you remove it, under the carpet you will find plastic thresholds that are nailed to the material with a stapler. The brackets need to be bent and the thresholds carefully torn off.

When the owner removed the standard “Grant” thresholds, he saw a place where the “Kalinov” clips fit perfectly. What do clips have to do with it? They will allow you to secure the new internal thresholds with self-tapping screws. In principle, one could do as the manufacturer did and reattach the elements to the carpet with a stapler. But then the whole point of revision is lost.

In general, the clips came in handy here. In total, 8 of them were needed for the rear sills - 4 clips for each door. When I installed them, I took a regular utility knife and applied notches for self-tapping screws to each clip.

By the way, I also bought standard self-tapping screws from Kalina - they are black and go well with the thresholds. And they fit perfectly into the clips. When I installed the thresholds, I “planted” them on the screws and that’s it – the modification was completed.

A total of 18 clips and the same number of screws were used. What was the benefit of installing new thresholds? The carpet is no longer so dirty, and moisture no longer penetrates into the interior. In addition, if necessary, the elements can be easily dismantled and then reinstalled.

Vazikov.ru » Lada Granta

Source: https://vazikov.ru/lada-granta/stavim-na-grantu-vnutrennie-porogi.html

Anti-gravel for thresholds

Anti-gravel is applied to the outer part of the body in two versions: as independent protection, under car enamel. Factory anti-gravel protection is applied to the bottom, lower part of the wings, sills; on the 2018 Grant, the lower parts of the front doors are covered with protection.

Before applying anti-gravel, the threshold must be prepared as for painting:

  • remove the old paintwork;
  • treat corrosive plaques, if any;
  • prime.

The primer is applied only to bare metal; if anti-gravel is applied to old paintwork or putty, then no primer is used. When making repairs, it is recommended to mount the car on a jack, having first checked the metal of the jacks.

Depending on what surface the anti-gravel is applied to, the work process varies. Algorithm for applying protection to painted thresholds:

  1. Cover with tape the part of the threshold that does not require protection.
  2. Clean the paintwork on the threshold with sandpaper and use R-80 sandpaper.
  3. Degrease the surface.
  4. Spray anti-gravel from a can.

Plastic overhead sills and plastic body kits are not treated with anti-gravel. Alternatively, you can use armor film or metal panels on the top of the part.

There are several types of anti-gravel protection available on the market:

  1. In aerosols or spray cans. Convenient to use when working on the body yourself.
  2. Cylinders for a special gun. They are most often used in industrial body processing at specialized service stations.
  3. In cans, the compositions are applied with a brush.

Depending on the type of application, anti-gravel can be used for painting or instead of car enamel.

If anti-gravel is used as additional protection for paintwork and is applied without painting, then the composition is sprayed onto the threshold in a thick layer. Manufacturers produce material in different colors, the most common being black, gray, and white.

Anti-gravel under enamel is marked by the manufacturer with a special sign: “for painting”. After the protective layer has dried, the threshold is painted with auto enamel to match the body color.

Replacing thresholds for Lada Granta (VAZ Granta)

The protection of the body from damage, various chips and dirt is provided by the thresholds of the Lada Granta (2109). You will find a wide range of stylish thresholds in our online store. Thanks to this overlay, the car body looks more harmonious and complete. You can buy thresholds from us at a very affordable price.

Stylish thresholds are the missing highlight that can decorate the exterior of your favorite “iron horse”. If you don’t want to make global changes, then tuning the thresholds is an excellent solution.

In addition to protecting the body from paint chips and contamination, the sills improve the aerodynamic characteristics of the car, which is important. To create a greater effect, you should pay attention to the complete tuning kit, which includes the installation of a front bumper, rear bumper and various trims.

Everything together creates a complete picture, where absolutely every detail is important. Decorate your car and add important elements to it.

The Tuning-Plast online store offers a wide variety of thresholds for the Lada Granta of various shapes and styles. Here you will find a suitable high quality body kit option.

Each element is made of durable material, is reliable and wear-resistant. Installing such an important detail will allow you to add personality traits to your usual image.

Make your car bright and special thanks to stylish door sills for the Lada Granta.

Let's consider such a question as setting thresholds on the Grant. By tradition, all work will be done with your own hands.

Remember that you can always improve the appearance of your car and you don’t have to turn to specialists for everything. Today we will talk about installing thresholds on the Lada Granta.

In rainy weather, this is a nuisance: you get into the car and the carpet turns into a dirty rag, and moisture also accumulates. The adverse effects of water should always be avoided. I went to the market and bought thresholds from Kalina.

Stickers

Protective door sill stickers for Lada Granta are an affordable alternative to plastic covers. The sticker covers a large surface area, is highly durable, and is available in different color options. The set includes 6 stickers, the cost of the set is from 400 rubles. Drivers choose stickers instead of armor film on plastic panels.

The protective sticker is made of vinyl, propylene, and consists of a base layer that determines the overall color of the coating:

  • chrome effect;
  • silver;
  • black metal.

The outer decorative layer imitates carbon, plastic, textiles, leather.

What to do if the paint is peeling off

The paint on any part of the body, including the sills, begins to peel off for several reasons:

  • there is a corrosion area under the paintwork;
  • chips after impact with gravel;
  • enamel rupture after mechanical damage;
  • the paint may peel off after contact with a chemical reagent;
  • natural wear and tear.

Paintwork wear is observed in Chinese-made cars, when body parts are painted in one layer, are not protected, and after a year of operation the paint begins to peel off. AvtoVAZ models are painted as standard in two layers; the paint wears out if the car is used in extreme conditions. Algorithm for repainting:

  1. Sand the part.
  2. If there is no rust under the peeling enamel, treat with a degreaser.
  3. Apply primer.
  4. It is recommended to use a primer with a high zinc content. This will allow the part to be locally galvanized.
  5. Paint it with paint to match the body color.

If corrosion is found under a strip of peeling paint, then it is necessary to carry out a full repair, first checking the condition of the bottom and wheel arches.

Dent Repair

Dents on decorative plastic overlays are corrected if there is no crack in the product. When the plastic ruptures after an impact, the lining is replaced with a new one. Fast and Furious spare parts are quite difficult to crush, the body kits can withstand significant side impacts, and they are repairable. Metal thresholds, as part of the sidewall, are straightened in ways that depend on the depth of the dent and damage to the paintwork. Repair options:

  1. Extracting a metal dent with a reverse hammer.
  2. Repair without welding using a vacuum suction cup.
  3. Correcting dents using hooks using the PDR method without painting.

The method without welding is used for metal linings and plastic elements, if the car enamel layer is not damaged. The most common option is using a reverse hammer, if the standard metal element is significantly deformed, and the vacuum suction cup method, if there is no damage to the paintwork. After removing the dent, it is recommended to additionally install protective panels.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]