Roof rack VAZ 2107 - tips on selection and installation

Cars of the VAZ “classic” family enjoy well-deserved love, including as economic “horses”. These cars carry trailers, building materials stick out of the windows, and, of course, every self-respecting summer resident has a special roof rack for transporting oversized and long cargo.

First of all, you need to decide on the dimensions of the VAZ 2107 trunk in order to know what maximum dimensions of cargo can be placed in the trunk with the lid closed. Here they are:

Everything that extends beyond these dimensions must be placed on the roof of the VAZ 2107 and transported on the top, removable trunk. This is especially true for long items. Materials such as boards, sticks, floor slats, if they do not exceed 4.5 meters in length, may not be marked with red marker flags. In the event that they protrude beyond the front and rear bumpers, they must bear the oversized load mark. This is especially true at the rear end.

There is an explanation for this: the front end is clearly visible to the driver, and he himself makes sure not to drive too close at the traffic lights.

The roof rack of the car is designed for a weight of no more than 50 kilograms. If the driver is sure that the road will be perfect, without the slightest holes, bumps and vertical vibrations, then you can put 75 and even in extreme cases 80-90 kg, but no more. Carrying heavier loads will cause deformation of the body structure, and this leads to disruption of the opening and closing of doors.

The photo shows an old trunk that was produced in the USSR. Its weak point is its “bowl-shaped” shape with raised edges. On such a trunk it is difficult to transport barrels placed on the roof, sheets of cellular polycarbonate rolled into cylinders due to the small number of points of contact.

Currently, all “classics” have high-strength and lightweight roof racks that fit all car models, from VAZ 2101 to VAZ 2107. They are made quite durable and lightweight, and are coated with anti-corrosion powder paints.

The supporting system itself, as a rule, is hollow box-shaped bars made of strong sheet metal, square in cross-section, which are located in a single row, in the amount of 6 - 8, connected at the ends by supports that give rigidity to the structure. Four support mechanisms, which have different designs, are attached to the supports. Most often they are made using eccentric - tightening screws.

In order not to scratch the profile of the VAZ 2107 drain, to which the trunk is attached, the contacting parts are equipped with inserts - polyethylene liners.

When installing a trunk on a VAZ 2107, you must follow two rules:

• The edges of the trunk should be at an equal distance from the windshield and rear window - this ensures correct alignment and distribution of the load on the roof;
• When tightening, you must maintain uniformity. There should be no unevenly tightened eccentrics;

It is even more important to follow the rules for securing cargo on the trunk.

• The most important thing is that the loads are securely secured in the anteroposterior direction. When the vehicle brakes in an emergency, heavy loads occur and cargo can be torn off the trunk.
• When driving with a loaded rack on roundabouts and long turns, you need to drive slower than usual and evenly, otherwise the angular acceleration may be too strong and the load will be torn to one side.
• When transporting long boards and whips, you must be very careful when starting, accelerating and braking, as the ends of the whips “play” and rock the car, causing vibration.
• Particular attention should be paid to transporting bulk cargo in strong winds - if possible, you should avoid this and wait for calm weather;
• Loads with a large area and resistance (rolled covering material, empty barrels) must be secured especially carefully;
• While driving, listen carefully to sounds on the roof. Take the time to go out several times and check the security of the cargo and the trunk itself.

By applying these simple rules, you can avoid troubles associated with a sudden drop and damage to the load, or - even worse - creating an emergency situation on the road.

ALTERNATIVE OPENING OF THE TRUNK FOR A VAZ 2107

Many owners of domestic cars, due to the lack of opportunity to purchase a more expensive vehicle, are trying to make their cars more comfortable. One of the options for improving the functionality of the VAZ 2107 is to control the trunk lock from the passenger compartment. This can be done either using a button or using a cable, which eliminates the need to open the mechanism with a key.

OPENING BY BUTTON

As the owner of the “Seven”, equipping the car with a device for opening the trunk with a button will not be difficult. The positive aspects of the electric drive include the following:

• convenience;
• practicality;
• following fashion.

Installing a trunk lock control button allows you to control the mechanism from inside the car

Some motorists believe that such an option on the VAZ 2107 is useless, but it’s still worth trying and seeing the usefulness of such a device. If you have decided to install an electric trunk drive, then first you will need to prepare the necessary parts:

• four-pin relay and a special terminal for it;
• activator;
• wires;
• button;
• female and male connectors, as well as electrical tape and heat shrink.

To install an electric lock on the trunk lid you will need an electric drive, wires, connectors, terminals and a button.

The activator is an electric drive, the operation of which is based on retraction or repulsion, depending on the installation diagram. First you need to remove the lock and install the drive rod. In order to be able to influence the lock tongue, you need to drill a hole in the side of the mechanism and bend the rod itself slightly. Once the rod is secured, the lock can be put in place. To avoid adjusting the mechanism, you should first mark its location with a marker or pencil. Next, you need to secure the electric drive, which will require 2 screws and a plate included with the device. Having fixed the product on the lid, proceed to the connection stage.

To be able to control the trunk lock from a button, you will need to connect the electric drive rod to the tongue, and attach the activator itself to the trunk lid

Before starting electrical work, remove the negative terminal from the battery and study the connection diagram.

Installation of the electric lock is carried out according to the electrical diagram

The electric drive device is supplied with power directly from the battery or through a fuse. Electrical installation consists of the following steps:

1. Voltage is supplied from the battery to the relay in accordance with the diagram.
2. Relay contact No. 86 is connected to the electric lock control button. The button is located on the dashboard in a convenient place.
3. Using a wire, contact No. 30 of the relay is connected to the green conductor of the electric drive using connectors.
4. The blue wire of the electric lock is connected to the vehicle ground.
5. Check the operation of the device.

VIDEO: INSTALLING AN ELECTRIC TRUNK LOCK ON A VAZ 2107

OUTPUT OF THE TRUNK LOCK CABLE TO THE PASSENGER

The trunk lock on the “seven” can be opened using a cable pulled into the car’s interior. To implement this idea you will need:

• cable 4 m long and 1.2 mm in diameter;
• braid 4 m long from bicycle cables;
• braid ends and cable clamps.

In order to be able to unlock the trunk lock using a cable, it is necessary to make holes in the mechanism to thread the cable and secure it to the tongue. Then they lay a cable from the lock to the driver's seat through the trunk lid, and install a suitable lever to open the mechanism. As a lever, you can use the hood opening mechanism from the VAZ 2109, on which the cable is attached. All that remains is to check the operation of the design.

PHOTO GALLERY: INSTALLING AND ROUTING THE CABLE TO THE TRUNK LOCK

To control the trunk lock using a cable, you will need the cable itself, a braid and some components

The cable control lever is installed near the driver's seat

The cable is attached to the tongue of the trunk lock to control the mechanism

Electric trunk lock

Now it’s time to deal with the trunk lid. If you're going to do some revision, do it until the end. There are several options for how to improve the VAZ 2107 trunk lock, remote, with a button and with an electric drive. Such tricks are explained by the fact that it is not always convenient to turn off the engine to open the trunk. And if you install an electric drive, then if you have an installed alarm system, it is easy to make a remote control of the lock.

Any electromagnetic lock can serve as an actuator. There are several varieties of them on sale; they may differ in size and stroke. The electric lock is attached directly to the trunk lid, preferably closer to the hinges, in order to reduce the load on them when opening the lid. The ideal solution for traction would be a cable or a strong steel guitar string, one end of which is attached to the lock tongue, and the other to the eye of the stem.

The connection diagram for the electric lock is shown in the photo, and the actuator must be turned on through any VAZ relay with four contacts. If there is an alarm, you can also include an electric lock in its circuit, then the trunk will open both from a button in the cabin and from the alarm remote control.

ROOF RACK FOR VAZ 2107

If the “seven” is often used to transport various cargoes, then, as a rule, the standard trunk is not enough. In this case, it is convenient to use a special roof rack. Oversized cargo can be secured on this structure. Before choosing a product, you need to find out the dimensions of the elements that can be placed on the trunk. Long materials such as boards, sticks, pipes, if their length is up to 4.5 meters, may not be marked with red flags. If the cargo exceeds the dimensions of the vehicle, i.e. protrudes beyond the front and rear bumpers, it must be marked with special red flags that inform other road users about the transportation of oversized cargo.

WHAT ARE THERE ARE RACKS?

On the roof of the VAZ 2107 you can install a roof rack of both the old type and the modern type. The standard “Zhigulevsky” trunk has dimensions of 1300*1050*215 mm, and its load capacity is up to 50 kg. This structure is fastened to the roof gutters using bolts. In general, roof racks can be divided into 3 groups:

• open;
• closed;
• in the form of racks.

The first option is universal. The product consists of transversely and longitudinally directed metal beams with a square or round profile.

The classic type trunk consists of a metal frame that ensures structural strength and reliability of fastening

The closed trunk is a trunk (box). The main advantage of this design is the protection of the transported cargo from bad weather.

The trunk in the form of a box allows you to protect the transported cargo from bad weather

The product, made in the form of racks, is used for transporting bicycles and other equipment. This design is used less frequently, but the load can be fixed on it easily and reliably.

A roof rack made of racks and crossbars allows you to easily and securely secure the load.

WHICH MANUFACTURER TO CHOOSE

There are many manufacturers of roof racks for the VAZ 2107 on the Russian market. The most popular companies include: Mamont (Russia), Golitsyno (Russia), BelAZ (Belarus), Inter (Russia). The price range of products ranges from 640 rubles. up to 3200 rub.

HOW TO INSTALL

Structurally, the roof of the “seven” has storm drains to which the trunk racks are attached. The installation of the structure for transporting luggage on the roof of the VAZ 2107 should be carried out at the same distance from the front and rear windows. Thus, the load on the upper part of the body and the pillars is distributed evenly. The rack fastenings are placed so that they do not create an obstacle to the doors when they open and close. On the Lada seventh model of recent years of production, there are special marks in the interior that indicate where the A-pillars are located. This makes it easier to install the product on the roof and position it.

When installing a roof rack, you need to ensure its positioning and install it in such a way as not to interfere with the doors

Before tightening the racks, you need to make sure that they are parallel to each other without distortion. If an installation error occurs, the roof surface may be damaged. After installing the racks, tighten the fasteners tightly so that the rubber elements are pressed well against the roof gutters. Having secured the luggage structure to the body, the product is considered ready for use. The main thing is to ensure that the load is securely secured, which will prevent its loss during sudden braking or maneuvers.

Today, a car trunk is increasingly used for its intended purpose, and in order to make its operation more convenient, you need to take care of the appropriate preparation. In the luggage compartment of the VAZ 2107, many people make a raised floor where the necessary things and tools are located. This kind of work is easy to do with your own hands, because it requires a minimum of tools and materials. Thus, it is possible to improve the condition of the luggage compartment and increase its functionality, which will ensure ease of use of the vehicle.

Installing an additional trunk

For roofs with storm drains, the first step is to attach the roof rack supports. It is very important to maintain symmetry during installation and ensure that they fit into their seals. If there is misalignment or they move freely, this will cause damage to the paintwork of your car. The adjusting knob of the fastening must be rotated until the rubber seals are securely seated.

This should be done without using much effort, the main thing is not to overtighten. If you overtighten the support fastenings, the beam may become deformed, and then your trunk will be of irregular shape. For flat roofs of VAZ cars, installation is performed a little differently. There are no handles on the racks in the trunk mounts of this car; everything is clamped with hexagons. When installing these types of racks, it is necessary to measure not only the symmetry between the rack mounts, but also the length from the end of the windshield to the edge of the car trunk.

The legs of the trunk supports of this type must be placed at different distances from the sealing rubber bands. After everything is set, you need to insert and adjust the arcs themselves. This can be done quite easily with the help of some keys that are used to adjust the fastener tensioners in the risers. Racks are not often installed on flat roofs of cars, because they are not very convenient, and they are not designed for heavy loads. In newer VAZ models, the installation of a trunk is reduced to a minimum, because the roof structure of these cars has rubber plugs under which there is a thread. Therefore, you just need to pull them out and screw your trunk.

Product Description

The trunk is a structure designed to transport large cargo . Located on the roof of the vehicle. Its design usually includes transverse and longitudinal supports and a fastening system.

The presence of a trunk is relevant in the following cases:

• A trip is being planned. You need to take with you the necessary things for an interesting and comfortable pastime.
• Transportation of purchased pieces of furniture and large equipment is required.
• An apartment move is planned.

The advantages of the trunk are that the device does not block the driver’s view, is inexpensive and is reliable.

What does the cost depend on?

The price of roof racks for the VAZ 2107 varies widely . The large difference in cost is explained by the fact that sellers take into account a number of factors when compiling the price list. The price of the product is affected by:

1. Variety.
2. Model.
3. Company manufacturer.
4. Place of purchase.
5. State.
6. Quality.
7. Material of manufacture.
8. Availability of a warranty card.
9. Delivery required.
10. Availability of current shares.

I bought a universal roof rack (VAZ 2101-07, Moskvich and Logan)

We had a damaged trunk (rusty, bent, shabby)…

And we are renovating the house and changing the doors ourselves, so it will be difficult to transport the doors with this one (even to the garage, even to the storage room, even to the garden). And it was decided to buy a roof rack of this design (it complies with technical regulations, I haven’t looked at GOSTs yet):

Yesterday we tried it on in the garage - it was fine, BUT we will have to modify it a little, namely: 1) put an elastic band in the place where the radius of the rounding of the bracket goes (it touches the metal on the roof);

2) bend the foot (otherwise it touches the door);

n) customize the fitter already on site.

Assembly: It is equipped with two strips [wrapped separately from the box in film] and four brackets (with all consumables: screws, nuts, etc.) [in the box]. Probably for the first time in my life I read the instructions from beginning to end and started assembling.

We have two beams, which are covered with a protective plastic casing with two plugs. The instructions say that they need to be removed. I tried to pull them off with my hands, but nothing happened. The case was already approaching the teeth as in childhood (clamp with teeth and pull). But he changed his mind and decided to try to remove it, holding it in the doorway. SO! we string the glove onto the plug (so as not to scratch it), place ourselves as conveniently as possible near the door, clamp the beam with the door and pull it towards ourselves, the result will not leave you waiting long.

Source

Main varieties

Manufacturers offer a wide range of roof racks. Among the popular designs it is worth highlighting the following:

• Basic . They are also called classic. They consist of crossbars and crossbars. Made of metal. They are universal. Allows you to transport various items. They have fasteners to secure things.
• Expeditionary . Made in the form of a basket with compartments. They can carry bump stops, flashlights, and a spare tire. Suitable for tourism lovers. Additionally, they perform a protective function, as they prevent scratching of the body by tree branches.
• Autoboxes . They look like a bag. Protect the roof from dirt and precipitation. Made from high-strength plastic. They are divided into hard and soft.
• Bicycles . Designed for transporting bicycles and sports equipment. They are fasteners located in different areas.

Roof racks available:

• Universal (suitable for all brands of cars).
• Specialized (for a specific car model).

Depending on the condition, you can take the product:

• New.
• Used.

At the place of purchase, the product may be:

1. Purchased from a specialty store in the city.
2. Ordered from an online auto parts store.
3. Taken from a private advertisement.
4. Purchased from the manufacturer's warehouse.
5. Purchased at a car dismantling point.

For VAZ 2107 you can take a roof rack:

• Original (manufactured by AvtoVAZ).
• Non-original (any other manufacturer).

There are luggage systems at the mounting location:

• To the drain.
• On the roof rails.

The luggage racks of the following companies are suitable for the VAZ 2107:

• DELTA.
• Amos.
• Eurodetail.

Luggage rack manufacturers

Gutter racks have been produced since USSR times. But due to the bowl-shaped shape and the small number of points of contact with the load, Soviet designs have sunk into oblivion. Although they can be found today as a rarity or an “unkillable” platform for transporting agricultural products.

Currently, luggage devices are made of lightweight, durable alloys using an anti-corrosion coating.

Load capacity 70 kg. Price from 450 to 900 rubles depending on the length of the crossbars. An excellent budget option, but at speed it shows poor aerodynamics - it is noisy.

Luggage baskets are installed on the Semerka. They create the necessary volume for small-sized personal items. But boxes on 2107 are a rare phenomenon. If only this is a car that has undergone exterior tuning. Then the shape of the airbox is combined with the curves of the car.

Video about installing a roof rack on gutters

At the end, two main rules should be added for installing luggage accessories on the drains of a VAZ-2107:

And also take care of the roof and operate the trunk in accordance with the instructions.

Source

Approximate prices

For a VAZ 2107 car, you can get a new roof rack for 790-14,800 rubles . You can find approximate prices for different models in the table below.

A used roof rack for a VAZ 2107 is sold for 450-700 rubles .

Expedition trunk