Trunk of Lada Granta
One of the advantages of Granta over its predecessors is the internal space, or rather, a sufficient amount of it. Both the interior and the trunk of the VAZ-2190, in this regard, compare favorably with all previous models.
As for the latter, its volume is 480 liters. For comparison, for the VAZ-2199 this value is 400 liters, for the Priora sedan - 430 liters, for the VAZ-2110 - 450 liters.
However, this 480 liters is sometimes not enough to transport some cargo, even if you increase the size of the luggage compartment by folding the rear seats. We are talking about those cases when it is necessary to transport not heavy, but large objects, or when there are too many things, and there is no way to fold the seats. In this case, a luggage rack placed on the roof of the car can help out.
Rules for transporting goods
When installing a luggage structure, do not forget about safety. You need to know some rules to transport luggage in cars:
Each driver has the right to independently choose the type of roof rack for the Lada Granta liftback. Such products are easy to install and have an economical price.
Source
Modern roof rack
Today, a roof rack for a car is not only a convenient and necessary thing, but also serves a decorative function.
Some car owners install it simply to improve the exterior of their car. We are not talking about the classic basket-shaped trunk made of welded steel rods, but about roof rails. These are two longitudinal rails installed on both sides of the car roof along the body.
There is another type of trunk - transverse arches, but it looks less attractive and, in addition, creates additional resistance to oncoming air flow while moving.
The same cannot be said about the roof rails. Without an attached load, they do not in any way violate the aerodynamic properties of the car.
Roof rails for Lada Grants are produced by two domestic enterprises: Petroil Tuning and APS. They are made from a durable aluminum profile (hollow inside), coated either with a protective and decorative polymer, or with an anodic oxide film and fade-resistant ABS plastic. For different modifications of Grants, roof rails of various sizes, configurations and costs are provided.
Granta sedan | Granta sedan "E" | Granta Liftback | |
Length, mm | 1350 | 1335 | 1420 |
Width, mm | 760 (adjustable) | 700 (fixed) | 810 (adjustable) |
Mounting type | Screw connection in the longitudinal groove of an aluminum profile | Screw connection using specially designed steel threaded bushings in an aluminum profile | Screw connection in the longitudinal groove of an aluminum profile |
Approximate cost, rub. | 3350 | 3150 | 3600 |
The kit for installing roof rails on the Lada Granta includes:
- left railing;
- right railing;
- gaskets (6 pcs);
- M6x12 screws (6 pcs);
- hex key (4 mm);
- protectors;
- tread edging.
Protectors are designed to protect the car's paintwork from damage that can be caused by the brackets when transporting goods. In addition, they perform the function of sound insulation, eliminating any rattling or squeaking in the area where the roof rails are attached.
Trunk installation
The open trunk is secured without much difficulty. Installing the roof rails will not take much time; any driver can do it. The kit includes:
To attach the roof rack to the Lada Granta liftback, you will need a hex wrench, which is included in the kit, but for reliability it is better to stock up on your own tool. Before starting work, the machine is placed on a level surface. All doors must be opened. How to install a trunk on a Grant:
The installed roof rails are not yet a full-fledged trunk; transverse aluminum strips will need to be attached and bolted to them. There are different models of slats: there are universal options, and they also sell special slats for Grants. Installing the roof rack on the Grant will take no more than half an hour.
Self-installation
Having purchased a set of roof rails, you can entrust their installation to specialists by visiting the nearest service station. There, for 15 minutes of work they will charge you from 150 to 250 rubles.
However, you can save on this by installing the trunk yourself. Moreover, everything you need is included in the kit, including installation instructions. An approximate algorithm for installing roof rails is as follows:
- We install the machine on a level area.
- Open the rear and front doors on the right or left side of the car.
- Remove the rubber seal between the roof and the upper edge of the doors. We start with the back door.
- There is no need to make holes for attaching the roof rails. They are provided by the factory and hidden under electrical tape. There is also no need to remove it. It is enough to simply pierce the electrical tape in the right place, after first attaching (trying on) the railing.
- We wipe the areas under the roof rails with a clean rag, getting rid of possible dirt and dust.
- We place the gaskets from the kit in the seats, aligning them with the mounting holes.
- We attach the right rail, placing its brackets on the spacers so that they are between the bracket and the body.
- We secure the roof rail using the screws included in the kit, 3 on each side of the car, without clamping them completely.
- Pressing the roof rail tightly against the roof, we completely tighten the middle screw, and then the other two, but do not screw it tightly.
- Along the perimeter of the front and rear railing brackets we glue the protector edgings so that the brackets are inside them.
- We dismantle the railing.
- In the resulting “windows”, limited by edgings, we install protectors by gluing them to the roof surface. The arrows on the treads should point forward.
- We remove the edgings and smooth the protectors.
- We install the railing according to the algorithm described above. We tighten the bolts all the way.
- We install the railing on the other side in the same way.
From theory to installation practice
To install roof rails on a Granta liftback you will need the following list of materials:
- actually, roof rails for a Lada Granta with a liftback body type;
- a set of bench tools for turning bolts and nuts;
- degreaser;
- masking tape.
Roof rails must be purchased for the Lada Granta liftback body type, completely repeating the aerodynamics of the roof and corresponding to the factory mounting holes. You should not have any problems with other consumables and tools necessary to complete the work. Installation is performed according to the following algorithm:
- 1. At the preparatory stage, the rubber plugs are removed from both sides of the car, starting from the back door and ending with the windshield.
- 2. The roof rails of the car are pre-installed. The middle bolt is tightened first, and then only the outer ones. The fairings in their normal position on the roof of the car are covered around the perimeter with masking tape. After which the roof rails under the trunk are again removed from your iron horse.
- 3. The areas marked with tape are degreased, then special protectors that come with the product are glued onto them. They will prevent the roof from rusting in case of moisture accumulation under the protectors and paint damage.
- 4. You can install roof rails for the purpose of their further use.
As you can see, the work is extremely simple and does not involve any difficulties. We also remind you that most loads require longitudinal cross members. They are easily mounted on installed rails using proprietary clamps. True, in order for the liftback trunk on your Lada Granta to have a complete look and functionality, you will have to purchase them separately. Otherwise, this is not such a big expense.
Installation on a car
By following the installation instructions included in the kit, you can easily do the work yourself. Lada Granta already has the mounting brackets necessary for installation. Therefore, there is no need to make additional holes in the machine body. They are located under the rubber seal. You should carefully remove it, clean the surface, attach the structural elements and secure them.
In this case, it is advised to first tighten the structure, and then tighten each bolt sequentially. It’s also a good idea to take care of the anti-corrosion coating where the roof rails are installed, otherwise there is a risk of experiencing housing corrosion in a few years. At the end of the work, the seal is returned to its place. The rest you will find in the kit purchased in the store. As a rule, it goes there.
- Set of crossbars.
- Linings.
- Racks.
- End caps.
When installing this device, there is sufficient space between the parts and the body of the machine, so you don’t have to worry about the coating. By following these simple instructions, you can easily select a roof rack for your four-wheeler, allowing you to unload your luggage space and make your car more attractive. And, of course, now, using the Lada Granta, you can transport large and long materials without outside help.
For motorists, an important aspect is not only the stylish appearance of the car, but also its practicality. Sometimes situations arise in which it is necessary to transport a large number of things or large cargo.
If your luggage does not fit in the cabin, or you need to take as many items as possible, for example, for outdoor recreation or for a trip to the country, then you should pay attention to special roof racks installed on the roof of the popular domestic car Lada Granta. This option is also suitable for transporting long cargo. With the help of a simple device on the roof, you can avoid spending money on delivery services and transport everything yourself.
Getting ready to carry luggage on the roof
To ensure the safety of securing and transporting cargo, it is worth installing a roof rack. First you need to select the roof rails. This part consists of 2 longitudinal arcs. Very often, along with securing luggage, they also perform a decorative function, so you should not choose the simplest option. The most worthy samples cost no more than 3.5 thousand rubles.
It is a mistake to think that installing longitudinal bars requires drilling holes in the roof of the car. The automaker has already taken care of installing the necessary mounting brackets. In the Lada Granta they are located between the roof and the doors, to find them you need to look under the rubber seal.
The mounting bolts must have a “6” thread, and to screw in the screws you will need a “8” wrench. For each bracket you will need to prepare 2 screws. Cross beams can be set to the required width, depending on the cargo being transported.
Another type of roof rack (especially in cases where the volume of the standard luggage compartment is sufficient for the owner) is to install only the crossbars on the mounting brackets. This model will be cheaper, but after transporting the cargo it is better to dismantle it, since the transverse joists create additional resistance and make noise, and also do not look very nice on the roof of the car.
Specifications
The roof rack consists primarily of two arched elements, which are installed perpendicularly using special fasteners. You can also use rails (arches fixed in parallel). In the classic version, the railing is a pipe with plugs at the ends, which is secured with holders.
Often, car stores offer a large assortment of similar elements, but there are certain criteria by which it is necessary to select a trunk and fastenings, so as not to regret this choice in the future. When purchasing this accessory for a Lada Granta liftback in a store, you should pay special attention to the load-bearing capacity of the entire finished structure. After all, some options allow you to distribute the load and transport luggage weighing up to 100 kilograms on the roof.
It is also necessary to take into account that the cheapest options are most likely suitable as decorations than for transporting heavy things. If you plan to use roof rails for their intended purpose, then immediately turn your attention to more expensive and high-quality options. Then the roof rack will be of good quality. Also important nuances when choosing are: the type of arches, length and material from which they are made. A secondary criterion is color. It can be matched to the body so that the roof rails are not conspicuous, or it can be used to highlight the car.
One of the most budget-friendly options is to purchase crossbars without roof rails from a car shop. This design on the Lada Granta liftback will not be able to withstand a large load, but will significantly save your money. After transportation, it is better to remove them, as they can create additional noise when moving and often look unaesthetic. However, for infrequent transportation of bulky luggage with low weight, such a roof rack will be the most optimal and will not hurt your pocket.
Characteristic
The trunk on the Grant is represented by roof rails, which have the form of two longitudinal arches, and transverse crossbars. These structures are not included in any package, but AvtoVAZ has provided holes for them in the roof of the car. Railings differ according to the type of location:
Vertical structures are presented in several modifications. They can be two-, three- and four-post.
Externally, the roof rack on the Grant sedan looks decent. There are many products in stores, which allows you to choose a design to suit the characteristics of the car.
Rails can have different shapes and colors.
Correct installation of the roof on Grant: features of operation
Any buyer of a useful accessory needs to know about the intricacies of installation. Any roof rack on a Grant car is secured with bolts. The work is quite simple and every motorist can do it. To carry out a quality installation you must:
1. Remove the rubber seal attached to the roof (door-roof protection).
2. Remove the insulation covering the mounting holes.
3. Install roof rails to the car roof.
4. Install the previously removed rubber pad on the roof.
5. Install the cross slides onto the rails and secure them.
High-quality accessories do not need modification. But in some cases, even the correct installation of the roof rack on the Lada Grant will not allow it to be used normally due to sliding runners.
In this case, you will need to add rubber gaskets under the mounts of the runners for a tighter connection of the parts. To avoid such problems, it is recommended to carefully study all parts before purchasing and make sure they are of high quality.
The autobox is installed on transverse skids. It is recommended to carry out installation parallel to the ground, avoiding skewing to one side.
The load must be distributed evenly so that the purchased roof rack for the Granta lasts as long as possible and does not require replacement of fasteners or parts. It is also important before each trip to check the reliability of the fastening of the rails themselves, and the runners and box located on them, and to strictly observe the operating conditions of the components.
The trunk of a Lada Granta car will allow you to use additional space for transporting things, small cargo, and construction materials. Before purchasing a roof rack for a Lada Granta, you should learn more about its characteristics and mounting methods.
The open design is suitable for close transport.
The second type is a covered stylized box. In addition to its practical purpose, it also has a decorative effect, improving the appearance of the car. But such a trunk is more difficult to install and has a higher cost. To install it, you will also need to purchase roof rails.
The Eurodetal car rack looks good on the Gratna liftback roof.
The covered option is necessary for long-distance transportation: it will protect your luggage from dirt and getting wet.