Alarm Pantera XS-3000. Programming of anti-theft system transmitters and other functions

A malfunction of the car alarm or problems with the key fob, for example, its loss or damage, lead to the need to bind a new transmitter.
Each security system supports several key fobs, usually not exceeding 4-5 devices. Therefore, the need to update the firmware of a new transmitter may also arise due to an increase in the number of connected devices. The sequence of actions when programming a car alarm depends on the model of the security system.

How to reboot the Starline a93 key fob?

the “Valet” button is pressed for 6 seconds, after which 4 siren signals should sound; On the key fob, press keys 1 and 2 simultaneously until a sound signal is played; the procedure is repeated for all remote controls, the number of sound signals is equal to the serial number of the key fob

; the ignition turns off.

Interesting materials:

Why do the tips of dracaena leaves turn yellow and dry? Why do ficus leaves curl and turn yellow? Why do fuchsia flowers fade? Why does an egg have a thick yolk? Why do chickens have double-yolk eggs? Why does a chicken egg have liquid white? Why does a little kitten lose hair? Why won't VK load for me? Why doesn’t it show my subscribers on VK? Why can't I install WhatsApp?

How to register a key fob for an alarm system

If problems arise with the security system, you may need to program the Panther key fob for the alarm.

Before pairing the transmitter, keep in mind that other remote controls will also need to be configured. However, remember that each operation must be performed within 15 seconds after the last action. If this interval is exceeded, the system will exit programming, and this will be confirmed by short and long signals. In addition, when the ignition is turned off, the mode is also exited.

Now let's look at how to program the Panther alarm key fob using the example of the SLK 625, 650 and 675 security systems. To bind the transmitter, do the following:

• Disable the security system and get into the car.
• If the alarm does not have a code set, simply turn on the ignition.
• In a 15-second period of time, click on Valet three times. The siren should sound once, followed by the LED flashing. This confirms your readiness for programming.

• Click and release the remote lock key. A long beep appears to confirm the success of the step taken.
• Pair the remaining remote controls. Registration of the Panther keychain (the second and subsequent ones) follows the same algorithm.

• Exit programming by turning off the ignition or waiting a 15 second interval. In this case, one long/short sound appears.

The Panther 625 key fob is linked to the alarm differently if the security code is set. In this case, after step 1, do the following:

1. Turn on, turn off, and then turn on the ignition again.
2. In a 15-second period of time, click and release Valet the number of times that corresponds to the 1st digit of the code. Default is "1". After this, turn the ignition on and off.
3. Repeat step 2 for the second digit of the password, if provided.

All that remains is to turn on the ignition and go through steps 4 to 6 of the instructions discussed above.

Knowing how to reprogram the Panther alarm key fob, you can link an old or new alarm system transmitter.

Features of Pantera SLK500 binding

If it is necessary to configure the Pantera SLK500, the actions should be similar to the “Pantera SLK-75SC” car alarm.

The only difference is in the choice of modes available for activation by the car owner. The security system gives you a choice of four possible options, shown in the table below.

Subscribe so you don't miss anything important Pantera alarm system is one of the leaders in the modern Russian market of anti-theft car systems. It has rich functionality and system configuration capabilities, as well as various configurations that differ in the number of tasks performed and the price per set of equipment. The owner of the Pantera anti-theft system can program up to 4 transmitters at a time, which makes the alarm not only effective, but also comfortable to use.

You will need

• – instructions for the Pantera alarm system.

Instructions 1 Prepare for the procedure for programming the anti-theft system transmitter. To do this, disarm the alarm and get into the car.2Check whether the system disable function is enabled using the secret Valet button. If the function does not work, then you need to enter the security system menu. However, getting into the settings will not be easy, since they are protected from entry by unauthorized persons, which is very reasonable, since otherwise any attacker could easily change the parameters of the security perimeter and gain access to the vehicle.3Enter your personal code in order to get in in the alarm programming menu. If the code has never been entered before, use the preset serial number, which can only be entered once. The vehicle owner is expected to take care of setting his or her own security code as quickly as possible.4 Start the car, turn off the ignition, and then start the engine again. After this, within 15 seconds, press the Valet button a certain number of times equal to the first digit of the security code. If you do not meet the allotted time, repeat the entire procedure, starting with the ignition.5 If the individual code consists of two or more digits, press Valet to also enter the remaining digits, adhering to a strict time schedule.6 After the last digit of the code has been entered and the ignition is turned off for 10-15 seconds, press the secret button three times. Please note that after this, the security system siren must sound and the LED should start flashing rapidly.7Press and hold the transmitter button. Another siren sound should notify the Pantera alarm owner that the transmitter has been programmed successfully. Next, you can begin programming another key fob, again focusing on a 15-second time interval.8 To exit the security system programming mode, simply start the car engine or do not press the service function control buttons. The alarm will give one short and one long signal, notifying the car owner about changes in the operation of the system, after which it will switch to security mode. –> –> –> Is the advice useful?

In this article, auto electrician Alexey Molotov answers the question “How to attach a key fob to a Panther alarm?”

The Panther anti-theft system is very popular among car owners. It has great functionality and has various configurations that differ in price and number of tasks performed.

The owner of the Panther security system can register up to four remote controls in memory at the same time, making its use even more comfortable and efficient. We'll look at how to attach a key fob to a Panther alarm below.

How to set the time on a Panther keychain

Correct display of the current time on the remote control screen is very important. After all, the clock turns on and off the most important functions: timed autostart, turbo timer, etc. The following instructions will help you set the clock correctly.

• To enter the setup mode, hold down the F key for five seconds.
• The key fob will emit two short beeps.
• The watch face data will flash on the screen.
• Using the “Trunk Opening” button we increase the clock value. Use the “Star” key to decrease the readings.
• To set the minutes, briefly press the F key.
• By clicking “Open trunk” we increase the minutes value. Use the “Star” button to lower it.
• Hold F for five seconds to exit time setting mode.

Panther alarm system - key fob, instructions and how the key fob works

The device with which control is carried out is a key fob. It has five buttons with which you can give commands. Communication is two-way. To provide the necessary information, the key fob is equipped with a small liquid crystal display.

In addition to the main key fob, the kit also includes an additional key fob with four buttons. The radius at which two-way communication is ensured is one thousand meters. If we talk about the distance at which an information signal can be transmitted, then we are talking about two thousand meters.

Main functions

The Panther keychain has a number of important functions for car security, but the functionality is not limited to them. In order to specifically imagine the possibilities, we will tell you in more detail about its functionality.

• Hours provided. Of course, this won’t surprise anyone these days, but note that this function is complemented by the presence of an alarm clock and a countdown timer.
• The code provides protection against scanning and interception. As is known, modern technologies in some cases allow unauthorized access to the system, but in this case, dynamic modification of the program code is provided, which provides an increased level of protection in such situations.
• Arming function with the signal to the main key fob disabled. Protection against false alarms. On the one hand, this may somewhat reduce the degree of protection of the car in the event of an attempt to steal it. On the other hand, there are cases of accidental activation due to weather (heavy rain) or other similar influences on the vehicle. In any case, the driver can use this if he deems it necessary.
• Possibility of transferring a call from inside the car to the owner's key fob. This may be important in the case when there is a passenger left in the car and he wants to remind the driver of himself.
• Remote engine start. There are several different use cases here. There is a launch on command. Periodic start-up with shutdown is also provided. A regular time interval at which the engine is started can be specified. It is possible to start depending on temperature changes.
• Some other features.

Contents of delivery

This system consists of several parts. After purchase, they must be carefully installed. If the driver has some skills in working with such equipment, then he can carry out the installation without much difficulty. If this seems too difficult, then it makes sense to contact an appropriate specialist. Let us list the main devices that make up the Panther.

• Main electronic unit.
• A key fob with a display and five control buttons.
• Additional keychain. It does not have a display and only three control buttons.
• The shock sensor is two-level.
• Siren to give a loud sound signal.
• A relay that is designed to block the engine upon command from the security system.
• A special block with wires designed for installing a blocking relay.
• LED indicator, along with its own cable.
• Push-button switch for Valet operating mode. Sometimes you may wonder what this mode is for. The point here is to disable some protective functions when the driver needs it. This situation, for example, may arise during the process of washing a car.
• The delivery set includes a limit switch.
• Set of wires.
• Instructions.
• Package.

Please note that we are talking here about the standard delivery set. Possibility of expansion is provided. As an example, we can talk about the possibility of installing GPS sensors. Such additions will increase the level of safety for the car.

How the key fob works

Once upon a time, the very first models used static code. Due to the fact that it constantly retained its value, there was a high probability of hacking and, as a result, the ability to turn off the alarm if it was stolen. This level of security was clearly insufficient.

Programming Pantera SLK-75SC

In order to program the Pantera SLK-75SC you need to follow the instructions:

• Disarm the system.
• Turn on the ignition.
• Press the Valet button the number of times corresponding to the selection of the desired mode in the table below.

• Press and hold the “Valet” button until the siren beeps.
• While continuing to hold down the Valet key, press button 1 for mode 1-2 or give any signal if 3-6 is activated.
• Turn off the ignition

How to turn on the key fob after replacing the battery

The battery is changed every three to four months and depends on the frequency of use of the remote control. You can change the battery yourself by following the instructions.

1. Pry off the battery compartment cover from below.
2. Slide and remove the cover.
3. Remove the dead battery.
4. Insert a new battery (AAA type). Observe polarity.
5. Put everything in its place.

After this, hold down two keys at the same time: “Open lock” and “Snowflake”. The key fob must independently restore the communication code with the control unit.

Why is the keychain not registered?

There are situations when it is not possible to bind the Pantera remote control for some reason. There may be several reasons for this:

1. Eliminate errors in the execution of work. Once again, figure out how to set up the Panther alarm key fob. To do this, read the operating instructions for your security system model.
2. Check the remote control to ensure it is working properly. Perhaps it has mechanical defects or moisture has gotten inside. In this case, the alarm will not respond to signals sent from the remote control.
3. Reboot. The cause may be a temporary failure of the Panther alarm. Before attaching the key fob, disconnect the battery power for a while.
4. Move the machine out of the interference area.
5. Make sure the transmitters are fully compatible. Otherwise, difficulties may arise.

These are the main explanations why it is not possible to link a new or used key fob to the Panther alarm system. If you cannot resolve the issue yourself, contact a service station or installer for help.

SLR 5100 key fob fell off: what to do

There are several reasons why the pager refuses to work.

1. One of the most common is a discharged battery. Insert a new battery and check the operation of the remote control.
2. Key fob desynchronization. Re-write the transmitter into the security system memory.
3. Exposure to external radio interference. Park the car in a different location.
4. Wear of the anti-theft complex. Contact the warranty center.
5. Low battery voltage. Charge it or install a new one.

Procedure for activating SLK-35SC switches

Security system transmitters use a dynamic code. In some situations, the codes of the remote control and the control unit become desynchronized. For that. To fix the situation.

• Approach the car.
• Double-click the button on the transmitter. Synchronization will be restored. The switch can be used.

The instructions are universal, suitable for programming key fobs SLK-100SC, SLK 4I, SLK-200SC, SLK 7I, SLK-5I.

Find out how to register your Pandora DXL 3000 key fob.

Differences in adaptation of SLK-SC and SLK500 pagers

You can program 85SC, 755RS according to the following instructions.

• The control unit's memory stores the codes of four key fobs.
• You are given fifteen seconds for each operation.
• Disarm the car and get into it.
• In the allotted time (15 s), press the “Jack” button three times. A short siren signal will sound. The LED will start flashing slowly. The system is ready to record remote control codes.
• Press the button on the first key fob. A long CHIRP will sound. Synchronization of the communicator is completed.
• Program the remaining transmitters using the same algorithm.
• To exit recording mode, turn off the ignition or do not perform any actions for fifteen seconds.

The car does not start with the Panther remote control: how to fix it

During the entire period of operation of the Pantera alarm system, one day you encountered such a problem as the autostart stopped working. A car engine may not start for three reasons:

• no control of a running motor - problems with programming, connection or standard wiring;
• problem with the wires to the handbrake;
• low battery charge.

Remote starting and stopping of the engine is carried out according to the following algorithm.

1. Apply the handbrake and set the automatic transmission to “PARK” mode.
2. Set the air conditioner settings.
3. Set the ventilation to recirculation mode.
4. Press the key with the star symbol twice. The turn signals will blink once. The engine will start.
5. To stop the motor, press the button with the star symbol. A siren signal and a 2-second vibration signal will follow.

What to do if the Pandora key fob does not see the car.

Recording car alarm pagers with one-way communication

The Panther security system is represented by models with one-way communication: CL-500, QX-44, CL-700, SL-600, XS2500, CL-550, SLK-25SC. The binding of the remote controls of these models to the system is carried out according to an algorithm.

• Fifteen seconds are allotted for each operation.
• Turn on the “Disarmed” mode. Get in the car.
• Activate, deactivate, turn on the ignition again.
• In the allotted time (15 s), press the “Jack” button three times. The system will emit one short siren signal. The LED will flash slowly. The signal is ready to record remote controls.
• Press and hold the “Lock Lock” key until the siren beeps for a long time. The LED will remain lit continuously as long as you keep the button pressed.
• Release the "Lock" key. The LED will flash slowly. The system is ready to record the next switch.
• Register the remaining sensors in the memory of the security system.
• To exit the recording, turn off the ignition.

This is interesting: How to set up a Starline a93 alarm system

Panther alarm system with auto start: operating instructions

PANTERA car alarms have long won respect. Its strong encryption and design allows it to keep its security top of mind. Alarm models with auto start and two-way communication are especially in demand. These systems have such a wide range of functions that it is difficult to understand everything without the user manual.

Models with auto start

Now you can purchase modern car alarm systems with an autostart function:

1. SLK-775RS;
2. SLK-868RS;
3. SPX-2RS;
4. PR-2.

These models have a whole package of added options and are considered the most reliable in terms of signal encryption and code reading.

Model capabilities and modes

Alarm system SLK-775RS is the most simplified option. It cannot be connected to the vehicle's CAN bus.

Its set of functions includes:

• two-way communication;
• auto engine start;
• turbo timer;
• protection against signal interception;
• preventing scanning;
• disabling the alarm system in two stages.

But the SLK-868RS model is an option adapted to any type of gearbox. It has the function of integrating control of engine operation by speed and oil pressure. To protect the code from attempts to read it, it uses a dynamic channel encryption method and doubled frequency, which increases the range to 2 km and significantly reduces interference.

SPX-2RS protects against hacking and code-grabbing due to the simultaneous operation of two interactive and redundant communication channels.

Other features include:

• reprogramming of additional channels;
• connection to CAN bus and immobilizer;
• 7 security zones;
• two-way communication;
• Panic mode;
• driver call function;
• control via GPS and GSM;
• two-stage disabling of security.

Model PR-2 is the most modern version. By using modern interactive communication channels, it makes hacking by code grabbers unacceptable.

• quick response to pressing;
• independent security zones;
• operating distance up to 1.2 km.