Replacing the air filter on a viburnum » Do-it-yourself car repairs

Why and when to change the air filter

To form a fuel mixture with the correct composition, clean air will flow into the combustion chamber. The operating conditions of modern cars are far from ideal. There is a lot of dust in the air, there are combustion products, midges, pieces of leaves, and other debris. It gets inside the chamber, clogs the fuel system, and negatively affects the engine. For this reason, timely and adequate cleaning is important. The filtration element is responsible for it.

In Kalina, removing the air filter housing is simple and quick; there are no problems with doing the work yourself - many drivers do it themselves. At a service station, the cost of the procedure starts from 1000 rubles, so there will be adequate savings.

The driver should know the symptoms of a blockage. In this case, he will be able to quickly take action. The following symptoms indicate a poor condition of the node:

Fuel consumption has increased - a dirty filter does not allow air to pass through well, so the car begins to consume more fuel to perform standard operations. If the blockage is severe, about 3 liters per 100 km are added.
The thrust disappeared and detonation increased - also a characteristic sign of a clogged filter.
There were problems starting the engine, it starts, but not the first time, it just changed its behavior. Engine power usually drops.

If you do nothing, difficulties will arise with the electronics, spark plugs, and the “Check Engine” error will appear. The only way to ensure the necessary conditions for durability and adequate operation of the element is to replace it in a timely manner. Cleaning and blowing are pointless because they do not solve the problem. The filtration element has the form of a plastic housing, inside of which a filtration unit is placed. A paper insert with large pores is needed to purify the air. Dirt gets clogged into the pores, preventing normal air exchange.

Blowdowns are used only as an improvised way to restore the performance of a part. In the long term they are useless, moreover, cleaning can disrupt the pore structure, and the element will perform even worse than before.

The cleaning unit is responsible for the longevity of the engine, so do not ignore scheduled replacements

To come in

Already have an account? Sign in.

Latest Visitors 0 users online

No registered user is viewing this page

Did you like the article? Follow our channel for new ideas of useful car tips. Subscribe to us in Yandex.Zen. Subscribe.

For optimal mixture formation, 1 part of fuel and 15 parts of air without contaminants must enter the combustion chamber. The conditions in which a car has to work are not always ideal. The air that enters the engine contains many foreign particles: dust, dirt, combustion elements, midges and much other debris. All of this will clog the fuel system or otherwise harm the engine if not cleaned. An air filter is used for this purpose. Dirt settles on the filter, impairing its performance. In this regard, the element requires periodic replacement.

Where is the air filter located?

The mounting of the air filter Kalina 1 and other versions is approximately the same. The element is located inside a large plastic box. You can find it if you open the engine hood. Another name for the element is the air filter housing. It is convenient to navigate using the signs.

Most drivers carry out Kalina service maintenance themselves

How to replace the air filter on Lada Kalina

Correct installation of the air filter on Kalina involves a number of steps. The work is not complicated, but rather requires accuracy. You should not rush, so as not to damage the components - many cannot be restored, only replacement will help. Beginners are recommended to watch the video before performing operations. Visual instructions are clearer and simpler. It would also be a good idea to read the manufacturer's recommendations.

Replacing the air filter Kalina 1 without air conditioning and with air conditioning is carried out according to the same scheme. The difference is that with a climate system, there is a need for regular cleaning. To treat the air conditioner, a special flushing agent is used; it is enough to repeat the procedure every 50 thousand km. If this is not done, a persistent damp smell will arise.

How to remove the air filter housing on Lada Kalina

Removal of the air filter Kalina 1 is carried out according to the following scheme; compliance with each stage is mandatory. You need to open the hood of the car, disconnect the plug from the air flow sensor. The operation takes a couple of seconds and there is no need to use a special tool. A clamp is used to secure the sensor. You need it:

Press upward.
Apply force and pull to the side.

It is better to hook the wires freed as a result to something so that they do not dangle. Experienced craftsmen usually simply move the wires to the sides. Then unscrew the four bolts that secure the filter to the cover. It is convenient to use a Phillips-type screwdriver, but a flathead screwdriver will also work. That is, you can remove the Kalina 1 air filter with its housing in 5-10 minutes.

All contamination must be removed during work

How to properly install an air filter on Kalina

After removing the bolts, you need to open the cover and pull it out, applying a certain force. The old element will be visible - it is removed to install the new one.

A clogged filter usually changes color greatly

It is correct to install the air filter on Kalina after cleaning the opened space from dirt and in the reverse order of removal. You need to make sure that the element is positioned as needed; a click will be heard. When installing, check that the ribs go in the direction of travel (forward).

Useful tips

Please note that when replacing the filter, it is necessary to simultaneously clean the drainage hole of the drainage box. You need to clean both from the side of the box and from the side of the front right wheel niche

Let us remind you once again that when installing the filter, the pointer arrow (on the original filter and a number of analogues) should be directed downwards, and the “front” inscription should be directed towards the front of the car.

Also, when installing the right windshield trim, both protrusions of the trim must extend beyond the front fender flange. In practice, the Kalina cabin filter with a plastic circuit, which also has an additional seal, is best suited for replacement. This type of filter element means that the protection will be better and no debris will get into the stove.

After installing a new cabin filter, do not rush to tighten the cap and begin reassembly. First you need to check that the latches securely fix the element, since a filter that is not fastened well enough can fly off when driving.

How often should you change the air filter?

The air filter on Kalina must be changed according to the regulations, otherwise the engine will come under attack and the atmosphere in the cabin will sharply deteriorate. You can use paper and carbon elements - the former are cheaper, the latter are better at eliminating contamination, and of all types at once.

The manufacturer recommends maintenance every 30 thousand km, but experts say that this is too much. This frequency is suitable under ideal operating conditions; in other situations, the intervals are reduced by 2-3 times. If starting is difficult, fuel consumption has increased, or vehicle dynamics have suffered, work must be carried out immediately.

Carbon elements eliminate debris, germs, and unpleasant odors

Procedure for replacing the Kalina air filter

So, first we open the hood of the Kalina and the first thing you need to do is disconnect the plug from the mass air flow sensor so that it does not interfere in the future. It is secured with a clamp that needs to be pressed up from below and pulled forcefully to the side.

It should come out without any problems. We take these wires to the side. They won’t get in our way anymore, but it’s better to hook them onto something, fix them somehow.

Now you can move on to the next step. Unscrew all 4 bolts that secure the air filter cover. It is best to use a thick Phillips screwdriver, but from personal experience I was convinced that the bolts are not tightened very tightly and a regular screwdriver is quite suitable, even a flat one.

After everything is unscrewed, it is enough to pull the lid with a little force to open it. We can say that everything is ready. We remove the old air filter by hand, simply pulling it, wipe everything thoroughly so that there is no dust left inside and replace it with a new one.

Don’t forget to place the element with its ribs forward, in the direction of movement, and firmly insert the sealing rubber on the filter body itself. We put the cover in place, tighten all the screws, and insert the same wire from the air sensor into its place. That's all. Do not forget that replacement must be done at least 30 thousand km in urban areas, and preferably no more than after 15 thousand km when operating in rural areas. Then dust and various debris will not get into the injector and the injection system of the Lada Kalina will work for a long time and without failure.

The air filter, which is installed in the air intake tract of the car, is important for ensuring the process of optimal formation of the air-fuel mixture. If you neglect to replace this element in a timely manner, the engine faces serious consequences, which over time can result in expensive repairs. The popular domestic model Lada Kalina, which we are considering, is no exception.

Replacement for VAZ 1117-1119

Note! This procedure will require interaction with electronics, we recommend that you remove the negative terminal from the battery! (For more details, see the article: “Replacing the battery in a car”, point 1)

Removal

First, disconnect the Mass Air Flow Sensor (indicated by the blue arrow) from the housing (indicated by the red arrow) by pressing the mounting latch from below and pulling it out.
Using a screwdriver, slightly loosen the fastening screw of the air supply pipe on the filter housing, then disconnect the pipe and move it aside so that it does not interfere with removal.
Carefully inspect the new filter, is there a mass air flow sensor housing on it? If not, then use a wrench to unscrew the two mounting bolts (photo 1), remove it and the gasket behind it from the filter housing (photo 2).
Then look under the TV - the front of the car, where the headlights, radiator grille, etc. are located. Find the nut that secures the filter housing to the radiator frame and unscrew it completely with a wrench (photo 1). Now remove the two top housing bolts (Photo 2). Find the bracket on the battery holding bar; it includes a rubber filter support (photo 3, red arrow), and remove it. The case no longer holds anything - remove it (photo 4).

When is it necessary to replace the Lada Kalina air filter?

The manufacturer's instructions for Kalina indicate that the filter we are interested in needs to be changed after the car has “run” 30 thousand kilometers. A driver who cares about the technical condition of his car pays little attention to this advice, preferring to change the filter much more often.

Experts recommend performing this procedure every time the oil is changed or the vehicle undergoes a technical inspection.

According to reviews from Kalina owners, the installation of a new air filter is required for their “iron horse” after 13–15 kilometers. However, if you drive your car exclusively on well-maintained city roads, the replacement can be carried out exactly within the time frame (30 thousand kilometers) set by AvtoVAZ. In other cases, the new element should be installed much earlier.

Considering that the operation of dismantling the old filter and installing a new one is easily carried out in a private garage, I think it is better to take care of your car and your safety while driving by replacing the failed element as necessary. The vehicle will respond to such care to the driver with long-term and trouble-free operation.

Do regular maintenance - help the engine!

Of course, this applies primarily to stable oil changes after a certain period of time and replacement of all kinds of filters according to the mileage of the car. And today we will talk about such a device, without which the work of the entire engine would be difficult. Of course, we will talk about the air filter.

What is an air filter for?

This filter is no longer helpful to you.

The engine air filter serves for timely air purification, as well as the formation of a fuel mixture in the engine. According to statistics, for every 100 kilometers driven, a car is capable of consuming from 11 to 16 cubic meters of atmospheric air, which undoubtedly contains particles of dust and dirt. And if there was no air filter in the car, then premature repair of the engine would be guaranteed.

How to change the Lada Kalina air filter with your own hands?

We purchase a new filter and prepare the following tools:

Phillips screwdriver;
rags;
vacuum cleaner.

We open the hood of our “swallow” and disconnect the plug from the air flow sensor. This operation is performed in literally a couple of seconds without using any special tool. The sensor is secured with a conventional fastener, which follows:

wait from bottom to top;
pull to the side with some effort.

The freed wires can be hooked onto something so that they do not get in the way when replacing the filter (if the procedure is performed by an experienced motorist, he simply moves them to the sides). After this, you need to unscrew the four bolts that secure the air filter to the cover. It is advisable to perform this operation with a Phillips screwdriver. But it doesn’t matter if you don’t have it on hand. On most Kalinas, the tightening of the mentioned bolts is not strong, which means they can be unscrewed with a simple flat-head screwdriver.

After removing the bolts, safely open the cover, pulling it out with little force. Before us is an old filter that we want to replace. We take out the spent element, carefully wipe the free space with a rag, and then also use a vacuum cleaner to completely get rid of fine dirt and dust. We take the new filter in our hands, orient it so that its ribs are located in the direction of movement (that is, forward), and insert it into the housing.

Which filter to choose for Kalina

When choosing a cabin filter, pay attention to its applicability. Is it suitable for Kalina or not?

Today, manufacturers offer a fairly large selection of filters at a variety of prices.

SCT SB 201 price about 150 rub.
BIG BIG-9597 from 180 RUR
Kilometer KM-9597C from 120 rub.
Salute 2112-1109080-03 from 140 rub.
RIGINAL 190557 from 130 rub.
ELEMENT EA-775 from 140 RUR

Any of the above filters can be installed on Kalina/Kalina 2, they will all fit. As a rule, most stores and service stations offer domestic filters Salut or BIG. They have proven themselves well, and their price is quite reasonable.

Part replacement procedure

Replacing the Kalina air filter is a fairly simple process that will take you no more than 20 minutes. In order to change this part on the Lada Kalina, you will not need any special skills or tools, you will only need a Phillips screwdriver. The replacement procedure is outlined below:

Open the hood and locate the air filter housing on the right side of the engine compartment.
Disconnect the plug from the mass fuel flow sensor. The sensor is located directly behind the air filter. The plug is attached to it using a latch; in order to remove it, you need to press the latch from bottom to top and forcefully pull the plug to the side.
Using a screwdriver, unscrew the 4 screws that hold the filter housing cover and, using force, remove it.
Under the cover you will find a filter element that needs to be changed. Remove it, but before removing it, remember the direction of the arrow on it. It should coincide with the direction of the corrugation.
After removing the filter element, it is advisable to vacuum the place where it is installed or at least wipe it with a rag.
Place the new filter element so that the direction of the marked arrow coincides with the direction of movement of the incoming air.
Adjust the sealing rubber in the housing and put the cover in place.
Reinstall the mass fuel flow sensor connector.

At this point, the replacement procedure can be considered complete. Now your car is insured against premature failure, and by replacing the filter, you have taken care of both yourself and the environment.

Replacing the Lada Kalina air filter is a simple and at the same time very important procedure. The filter plays a huge role in the formation of the fuel mixture, and untimely replacement can lead to a decrease in the vehicle's performance and serious engine damage.

Filter replacement steps

The replacement procedure is so simple that you shouldn’t even think about turning to the services of car service workers. Even a driver who is behind the wheel for the first time can do it.

To do this, you must follow the instructions:

prepare a new filter and a Phillips screwdriver;
open the hood of the car and unscrew the 4 screws that secure the plastic protective cover;

we take out the old filter, wipe the standard seat and install a new consumable

It is important that the direction of air movement coincides with the direction of the fibers of the cartridge;

close the lid.

What is an air filter for?

Lada Kalina, like any other passenger car, consumes about 12-14 cubic meters. m of air per 100 km of run. The air enters the fuel-air mixture, which burns in the cylinders and sets the engine pistons in motion. Since the air contains a lot of dust and dirt, it needs to be filtered, and it is for these purposes that an air filter is used. It is often made from simple cardboard, so it is quite cheap.

If the air entering the engine cylinders is not cleaned, all the dust and dirt from it will settle on the cylinder walls, which can ultimately lead to premature engine repair. In addition to direct filtration, this part is also used to soundproof the intake tract and to regulate the temperature of the fuel mixture.

If the filter is heavily clogged, it begins to pass air less well, which leads to an enrichment of the fuel mixture and, accordingly, to its incomplete combustion. Because of this, engine power decreases, fuel consumption increases, and exhaust gases become more toxic. That is why the filter element must be changed promptly.

AvtoVAZ recommends changing the Kalina air filter every 30,000 km if your car is used in city conditions, and every 15,000 km if the car is used for country trips. In each case, these numbers may vary slightly.

If you don’t know when the filter was last replaced, you can simply inspect it visually: if the filter element is dirty and covered with dust, then it needs to be changed.

Often, car owners replace this part at the same time as changing the engine oil. Depending on operating conditions, this is done either at each oil change or every other time.

Design features of the “air filtration system” of 8 and 16 valve engines

The air supply elements in the 8 and 16 valve engines of the Lada Granta do not have any special design differences. Therefore, we will look at the process of replacing the air filter using the example of an 8-valve engine 21116.

Of all the tools we need, we will need moderately straight hands and a crosswise screwdriver. Difficulty: minimal. But the result can exceed all expectations. A clogged filter may result in loss of power and increased fuel consumption (factory fuel consumption data).

Replacement process with photo

Open the hood. The air filter housing is circled in red.
Remove the terminal from the MAF connector. You don’t have to remove it, but it’s more difficult. Disconnect
We take a screwdriver in our hands and unscrew the 4 bolts securing the air filter housing. These bolts must be unscrewed
We remove the old filter.Old filter
We clean the filter housing from the inside; most likely, there will be a lot of dust inside it, and there may also be dry leaves. You can use a damp cloth, just make sure that the lint does not remain in the filter housing after use.
We install the new air filter in the same way as the old one.
We assemble the body and screw back the 4 bolts. Screw everything back

Air filter life

The service life of the air filter is marked on its housing.

The service life of the air filter is 30,000 km.

This is the number indicated on the case. But it should be remembered that if the car is operated in poor external conditions, then this figure can be reduced. In this case, it is necessary to regularly check the cleanliness of the filter.

If you mainly drive on dirt roads, then replacement may be required after six or even five thousand kilometers. In desert areas the situation will be even more complicated.

Part numbers

There should be no problems purchasing an air filter. They are available in any self-respecting auto store. But just in case, we will write a couple of proven articles.

GB-9597 E4 - Big Filter - (146 rubles in total in the autodoc) One of the cheapest filters

Working principle of the air filter

Left - old, right - new air filter

Air intake usually occurs from outside the vehicle.

And, given that the conditions outside can be very different, sand, dust, pieces of asphalt and even pollen can get inside with the air.

All these inclusions do not allow the engine to operate properly. So, on the way from the air intake to the engine there is an air filter in which these particles are retained.

Most often, so-called dry air filters are used, which have the structure of a regular paper cartridge. As the practice of the automotive industry has shown, it is this filter format that has the best ratio of cost and degree of purification.

Air filter devices

The design of such a filter requires the presence of a plastic casing in which the cartridge is located. It, in turn, includes a frame with a special sheet of paper folded like an accordion. The paper should have a pronounced porous structure. And additional processing of the paper allows us to talk about reliable protection against moisture, which can damage ordinary paper products. And the peculiarities of the interweaving of cellulose fibers are such that air can pass between them, but anything larger than microscopic sizes will be retained.

Injection car models, as a rule, use rectangular-shaped filters, while carburetor options use oval and round shapes. The box can last quite a long time, but the filter element itself needs to be changed regularly.

Which air filter to choose?

The dry paper filter option we already mentioned is standard for most machines. But, sometimes, alternative options may be used. We are talking about liquid-type models that use mineral oil to purify the air. Moreover, in order to save money, you can choose already used material for the role of oil.

The key advantage of such filters is that you can change the oil as soon as the old one becomes too dirty. But the disadvantage of such filters is that they have a large mass, so they should not be used on modern cars.

Zero resistance filter under the hood of Lada Granta

Separately on the list are “zero resistance” filters, which have a special structure, but are built on the same type of paper. They are used on cars with a sporty "bias". This can significantly increase the engine power.

Part replacement procedure

Open the hood and locate the air filter housing on the right side of the engine compartment.
Disconnect the plug from the mass fuel flow sensor. The sensor is located directly behind the air filter. The plug is attached to it using a latch; in order to remove it, you need to press the latch from bottom to top and forcefully pull the plug to the side.
Using a screwdriver, unscrew the 4 screws that hold the filter housing cover and, using force, remove it.
Under the cover you will find a filter element that needs to be changed. Remove it, but before removing it, remember the direction of the arrow on it. It should coincide with the direction of the corrugation.
After removing the filter element, it is advisable to vacuum the place where it is installed or at least wipe it with a rag.
Place the new filter element so that the direction of the marked arrow coincides with the direction of movement of the incoming air.
Adjust the sealing rubber in the housing and put the cover in place.
Reinstall the mass fuel flow sensor connector.

At this point, the replacement procedure can be considered complete. Now your car is insured against premature failure, and by replacing the filter, you have taken care of both yourself and the environment.

Every owner of a Lada Kalina car should know how to replace the air filter with their own hands. For those who have not done this yet, a useful guide from our website. As written in the official operating and maintenance instructions for the Lada Kalina, the air filter should be replaced at least every 30,000 km. Of course, these are only recommendations from AvtoVAZ, and they should not be treated as a clear rule.

Although, if the car is constantly used in the city, then most likely this period is quite justified. But if your car spends most of its mileage in rural areas, then it is better not to wait until 30 thousand km, but to change the filter no later than 15,000 kilometers. I would like to describe the entire procedure in more detail below. Experienced owners will not need this instruction, but a beginner will find it quite useful.

Replacing the air filter yourself:

So, first, open the hood of the Lada Kalina and the first thing you need to do is disconnect the plug from the mass air flow sensor so that it does not interfere in the future. It is secured with a clamp that needs to be pressed up from below and pulled forcefully to the side.

It should come out without any problems. We take these wires to the side. They won’t get in our way anymore, but it’s better to hook them onto something, fix them somehow.

Do not forget that replacement must be done at least 30 thousand km in urban areas, and preferably no more than after 15 thousand km when operating in rural areas. Then dust and various debris will not get into the injector and the injection system of the Lada Kalina will work for a long time and without failure. Another useful article will be for you to replace the cabin filter of the Lada Kalina with your own hands.

Today’s article will not be large in volume; it will tell you how to independently replace the air filter on a Lada Kalina.

In general, the instruction manual says that on the Lada Kalina the air filter is replaced after thirty thousand kilometers, many do this, but this is not entirely correct.

Some advice from professionals

The following symptoms indicate that your car's air filter is dirty and requires immediate replacement:

reduction of vehicle dynamics;
difficult starting;
a noticeable increase in fuel consumption.

If you begin to notice these phenomena, check the filter and change it. All the described symptoms will disappear without a trace. And further. When you install the new filter, very carefully insert the rubber seal, which is located on the housing itself. Then tighten the bolts and enjoy the high-quality operation of the car’s engine over the next 10–12 thousand kilometers.

Welcome! Air filter - These are the lungs of a car that clean the air from various types of dirt and other substances so that it does not get into the car engine; even the smallest particles of dust when entering the car engine scratch the mirror part of the cylinder, and this has a very bad effect on the coefficient of friction. how it rises.

Note! In order to replace the air filter, you will need to take with you: A screwdriver with a Phillips head, with which you will unscrew the screws securing the filter cover!

Summary:

Where is the air filter located? It is very easy to understand where the filter itself is located, since it is located in a large plastic box, and it is very easy to notice it by opening the hood of the car engine; for clarity, this box (It is also called the air filter housing) is shown in the photo below with a red arrow.

When should you change the air filter? The filter on a car must be replaced only after traveling 30,000 km. (This is what the factory says), for carburetor cars this period is 2 times less, but this does not mean that the filter will need to be changed exactly after 15,000 km. in fact, the filter changes depending on the terrain you drive in, and if you live in heavy cities where the environment is not so good, then you will have to change the filter much more often than the manufacturer says, you can find more detailed figures in an article called: “Everything about the car air filter, why they are needed and when they need to be replaced.”

When to change the air filter on Kalina?

Although modern filters are of better quality, a lot depends on the operating conditions of your vehicle, let’s say you often drive on dusty dirt roads, and this significantly reduces the life of the filter element and 30 thousand is out of the question.

Many car owners, of course, only drive on asphalt, but nevertheless, dust, dirt, and fluff inevitably get into the filter, no matter how much you want it.

Therefore, I would like to give a little advice to beginners: at least sometimes remove and blow out the filter with compressed air, this, so to speak, will allow your engine to breathe freely and it will thank you with its power and dynamics.

What can happen if the Kalina air filter is clogged:

Loss of engine power.
Increased fuel consumption.
The mass air flow sensor (MAF) may fail.

Self-replacement of the Lada Kalina air filter

All actions will be carried out in the engine compartment, so open the hood and start changing the air filter.

What you will need:

New air filter Lada Kalina.
Screwdriver.
Rags, rag.

So, the steps are very simple: remove the connector from the sensor (mass air flow sensor) and unscrew the four screws that are made to fit a shaped screwdriver (Phillips), you can unscrew them even if they are not very tightly tightened with a regular screwdriver.

We lift the upper part of the housing and take out the filter, after which we thoroughly wipe everything there. We install the new one with the strips forward in the direction of the air flow if there is a hint on the body.

Now we screw the screws back in, and most importantly, don’t forget to insert the connector onto the mass air flow sensor, which you removed before.

At this point, replacing the Lada Kalina air filter is considered complete. Never forget to change the filter on time, be it a fuel, oil, air or cabin filter.

The air filter is designed to clean the air entering the car engine. It refers to consumables that require replacement during routine technical inspections. The article describes how to replace the Lada Kalina air filter.

How to change the cabin filter on a Grant

Praise to AvtoVAZ - changing the interior is relatively easy and the same on Grant and Kalina. Changes from the street in the engine compartment

– dismantling of complex elements is not required.

Required

for all work:

Torx key T-20;
Crosshead screwdriver;
New filter.

All you need for the job: a star wrench, a Phillips screwdriver and a replacement filter.

Step-by-step filter replacement

To work, you will have to remove part of the decorative apron at the base of the windshield. To do this, raise the wipers to a vertical position.

To raise the wipers, turn on the ignition and start the wipers. As soon as they reach a vertical position, turn off the ignition. Now access to the apron is free.

Step 1: Raise the windshield wiper to a vertical position. Step 2: remove the plastic trim from the right wiper.

We gained access to the filter casing - use a Phillips screwdriver to unscrew the 2 screws securing the cover

. Let's take it off.

Remember the order in which you removed the cover. It is inconvenient to place it - it is better to know exactly which edge to place first.

Step 3: Remove the filter housing. We get access to the element itself.

Last thing

– bending the fastening latches, remove the filter

. If there are leaves and debris underneath, you can vacuum or blow out the seat.

You can buy a new filter without a mounting frame. In this case, remove the old filter from its frame and use it to install the new one.

Step 4: replace the old part with a new one. If the new filter is in the frame, just put it in place. Otherwise, we use the frame from the old element.

Reassemble in reverse order

2 fastening latches;
2 self-tapping screws in the casing;
5 screws in a plastic cover.

Features of replacement for Grant standard, 8 valves without air conditioning

On a number of Grants, the standard configuration does not have a filter from the factory.

. Regardless of body type: sedan or liftback. What to do with such cars?

Just install the filter according to our instructions. There is simply no filter in the car - there is a place for it and access to it is the same.

In relation to the cabin, the air conditioner affects only one way: after a long period of use, the air conditioner will begin to blow poorly.

In what cases is replacement necessary?

For a car, especially with an injector, it is very important what condition the air filter is in. For high-quality operation of an internal combustion engine, a large volume of air is required, much larger than fuel, which is taken from the environment. The purpose of the filter element is to clean this air from these contaminants, because the quality of the air-fuel mixture depends on its purity.

The filter is a filter paper folded into an accordion to increase the filtering surface. During operation, the pores of the filter become clogged, which reduces its throughput and deteriorates the quality of the air that comes from the environment. The air filter also acts as a device that reduces noise during air intake, as well as a thermostat. This is especially true in winter; the incoming air, passing through the filter element, heats up, so the temperature difference will not be so noticeable.

The following factors influence the frequency of replacement:

quality of road surface;
quality of the filter element;
terms of Use.

According to manufacturers' recommendations, the filter material should be changed at least after 30 thousand kilometers or after a visual inspection if it is heavily contaminated.

If the car is operated on unpaved roads or in a metropolis with polluted air, the air filter must be changed after 15 thousand kilometers.

Old and new filters

Recommendations for use

For proper operation of the engine at full power, it is necessary to ensure the cleanliness of the filter material. You should not wait until it becomes completely dirty, as in this case the engine power decreases and fuel consumption increases. In addition, abrasive particles coming from contaminated material can scratch the cylinder walls, which will lead to wear of the cylinder-piston group.

Thus, it is not necessary to follow the recommendations specified in the operating manual for the Lada Kalina car and change the filter element after 30 thousand km. It should be changed as it gets dirty, most often after 15-20 thousand km. The procedure does not take much time, but the engine will last longer and operate efficiently.

Video “Replacing the air filter on a Lada Kalina car”

This video demonstrates the process of replacing the air filter on Kalina with your own hands.

The air filter belongs to the engine power system and is designed to clean the air involved in the mixture formation process. Excessive filter contamination leads to oxygen starvation, reduced engine power, excessive fuel consumption, etc. If unpurified air is not so harmful for piston group parts, it is simply destructive for the mass air flow sensor (MAF). The sensor is located directly after the air filter and is perhaps the most expensive sensor (its price is 2500 - 3500 rubles) in the Kalina engine management system.

Replacing the air filter is a routine maintenance procedure for a Lada Kalina car. If your car is no longer under warranty, for the reasons described above, it is still necessary to replace it - this will save you time and money.

What you will need for replacement: the filter element itself, and a Phillips screwdriver.

Procedure: 1. Unscrew the 4 screws securing the filter housing cover and remove the filter element (we recommend remembering the location of the arrow marked on it!).

2. Insert the new element so that the arrow marked on it coincides with the direction of the air flow.

3. Close the lid, tighten the 4 screws evenly, avoiding distortions.

Replacing the fuel filter

The fuel filter also belongs to the engine power supply system. It is located on the right side of the fuel tank near the rear wheel. A clogged filter can lead to loss of power, jerking and stalling when driving. In the author’s practice, there was a case when the filter housing (by the way, a filter from the AvtoVAZ assembly line!) leaked and gasoline oozed through it.

Replacing the fuel filter, like the air filter, is a routine vehicle maintenance procedure. If the car is no longer under warranty, it is recommended to change the filter once a year, along with an oil change.

Attention: This operation involves direct contact with gasoline, it must be carried out away from sources of open flame and avoid smoking!

What you will need: a new filter, rubber gloves, an inspection hole or a piece of tarpaulin (when performing this operation from a “lying” position).

1. Unscrew the plug on the fuel rail, then press the valve with a screwdriver and bleed the remaining fuel in the fuel line into a previously placed container or rag. Screw the plug into place.

2. Squeezing the antennae of one of the tips of the fuel filter, gently shake it and at the same time pull it off the filter fitting. We carry out a similar operation with the second tip.

3. Use a 10mm wrench (preferably a socket wrench) to loosen the clamp and remove the filter. We insert the new filter so that the arrow on its body is directed in the direction of fuel flow. For Kalina 1118 “sedan” this is in the direction of travel of the car. 4. Snap both tips into place, making sure that they “sit” all the way. 5. Turn on the ignition (but do not start the engine!) for 5-6 seconds - 3 times in a row. The pressure in the fuel system will be maximum. Inspect the filter for fuel leaks.

If everything is in order and gasoline is not dripping or oozing anywhere, the operation is completed.

Please rate the article

Everything is clear and to the point. Photos with notes are very helpful! Thanks for the clarification. Good luck!

Welcome, friends, to the DIY auto repair website. We are starting to write another column on the repair and maintenance of the Lada Kalina car.

Today’s article will not be large in volume; it will tell you how to independently replace the air filter on Kalina.

Replacing the air filter Lada Kalina

In general, the instruction manual says that on the Lada Kalina the air filter is replaced after thirty thousand kilometers, many do this, but this is not entirely correct.

When to change the air filter on Kalina?

Many car owners, of course, only drive on asphalt, but nevertheless, dust, dirt, and fluff inevitably get into the filter, no matter how much you want it.

What can happen if the Kalina air filter is clogged:

Loss of engine power.

Increased fuel consumption.

The mass air flow sensor (MAF) may fail.

How to choose a filter element for Kalina 1 and 2

Many people choose an air filter so that it lasts as long as possible. But this is the wrong criterion. One of the most important parameters of an air filter is its ability to trap a larger number of small particles.

Only a good filter from a trusted manufacturer can sufficiently clean the air entering the collector. Before choosing a filter, you must use one of the following catalog numbers (articles):

21120-1109080-00;
21120-1109080-02;
21120-1109080-06;
21120-1109080-03;

All filters with these numbers are the same and are suitable for cars of the Samara, Samara II, Lada Niva, Lada Granta and Lada Kalina 1 and 2 families.

The next stage is the selection of manufacturers. The best in terms of price/quality are:

Original – AVTOVAZ – 363 rubles;
Big Filter – 219 rubles;
Bosch – 327 rubles;