Tuning the interior of a VAZ 2106 with your own hands at home

Today, the interior of the Six, modernized in those distant years, looks too old-fashioned. Therefore, many owners of this model do tuning themselves. Fortunately, the car is easily amenable to such modifications and allows for maximum comfort for both drivers and passengers.

How to do tuning of a VAZ-2106 interior with your own hands

The VAZ-2106 car came off the assembly line in 1975 and was a modernization of the three that consumers liked. In comparison with this model, the manufacturer has made a number of changes to it, relating not only to power and engine volume, but also to design. The appearance of the body has improved somewhat, and the interior has also become more spacious and functional. In addition, high-quality materials were used in its casing, which were easily cleaned from dirt. Today, the interior of the Six, modernized in those distant years, looks too old-fashioned. Therefore, many owners of this model do tuning themselves. Fortunately, the car is easily amenable to such modifications and allows for maximum comfort for both drivers and passengers.

VAZ-2106: technical characteristics

This car and its modifications are a five-seater passenger vehicle with rear driving wheels. The body is made of all-metal by welding.

The car's engine is a four-cylinder gasoline engine with a volume of 1.5 or 1.6 liters and a power of up to 75 horsepower.

VAZ-2106 is equipped with a 4-speed manual transmission, and modified models are equipped with a 5-speed.

A vehicle weighing about 1050 kg can carry a maximum weight of 1.5 tons. Car clearance – 175 mm.

The VAZ-2106 accelerates to 100 km/h in 16–19 seconds, depending on the vehicle’s load. Maximum speed – 150 km/h. Fuel consumption during economical driving is 7.5 liters, otherwise – 10 liters.

For tuning the VAZ-2106, the technical characteristics described above are very important, as they allow you to correctly select the necessary spare parts and materials for the job, to know what can be changed and what cannot be changed.

Vibration and noise protection

How to do interior tuning on a VAZ-2106 car? If you intend to bring your car into full compliance with modern standards, you have to perform a whole range of work. We recommend starting with improving the sound and vibration insulation characteristics, which will immediately make using the car much more comfortable.

If you intend to install new seats, as well as perform any welding work, it is better to insulate the interior after they are completed.

We also recommend pre-treating all metal parts of the body with an anti-corrosion compound - this will avoid the need to dismantle the sound insulation if even small traces of rust appear.

The modern market offers a wide selection of insulating materials for every taste and color. To attach them to the internal surfaces of the body, you can use special adhesives. To reduce the level of noise coming into the cabin from under the wheels, you can attach a carpet carefully cut to size to the floor.

Recommendations

You can meet people who use films to cover plastic parts; many say that such people are engaged in idiocy and spoil the classic look of such a car. But many people find it difficult to understand why this happens. For owners of a VAZ 2106, tuning the interior with their own hands, a photo of which is recommended to be viewed, it will be very useful to know that today a relatively popular entertainment is reupholstering individual parts with carbon film. This is not difficult work and quite interesting.

You can, of course, carry out a complete tuning of the VAZ 2106 interior; you can watch a video of how car enthusiasts do this in the article. However, manipulations inside will require a minimum of financial investments, time and abilities. The car body is often covered with film; this pleasure is quite expensive, but the result will be very positive.

In general, tuning the interior of a VAZ 2114, a photo of which is worth looking at in advance, may involve altering individual parts. Seats, door cards, handles, front panel, ceiling and other parts. Various types of leather are used for upholstery; this is the most popular material, but it costs an average investment. If we consider the ceiling separately, we can conclude that from the factory the car, as a rule, has a white fabric ceiling.

Over a certain amount of time during prolonged use of the car, the material begins to deteriorate and loses its original appearance. In this case, you can reupholster it with inexpensive material, it will look interesting and beautiful. We looked at the main elements that can be changed and modified inexpensively and efficiently.

Rugs. A standard car is equipped with rubber or pile products. They are simple, easy to clean and generally practical; many people use them for a long time. Visually they look very bad, especially if you are engaged in such work, then you need to do it in such a way that everything fits into the interior.

Changing the appearance of a car is a pleasant and interesting job, both for a specialized service and for people who do this work with their own hands. Whether it is worth doing this and spending your money and personal time is up to you to decide. But the result will be truly wonderful, especially if you personally participated in the process. Below is a thematic video that may allow you to do the tuning yourself:

Improving the appearance and functionality of the dashboard

After all the necessary insulation work has been carried out, you should also pay attention to the dashboard. To change its appearance, car enthusiasts today use the following technological solutions:

painting a torpedo using liquid rubber. This is the cheapest type of tuning, which will be affordable for car owners with any financial capabilities. The only drawback is the need to restore the layer of liquid rubber from time to time in order to eliminate any scratches and chips that appear;
installation of decorative inserts made independently from polymer materials. In the process of selecting them, it is necessary to pay attention to the strength characteristics in order to avoid breakage of the original design elements in the future;
reupholstery of the torpedo with artificial leather. The variety of materials on the market today allows you to give the dashboard absolutely any look that suits your taste preferences;
use of vinyl films for covering torpedoes. Another inexpensive tuning method, which, despite the low price, allows you to radically change the appearance of the panel;
installation of new instrument lighting. As you know, the standard system uses ordinary light bulbs, which draw a lot of energy and do not provide sufficiently bright lighting. If you replace them with modern LEDs, the effect will be amazing. Especially with the use of multi-colored filters;
installation of a new scale on each of the devices. You can choose the desired color yourself, as well as the gradation that suits your requirements.

After transforming the dashboard, you can work on other parts of the interior of the VAZ-2106.

Interior reupholstery

The next stage is reupholstering the seats, as well as the ceiling, doors, gear lever, steering wheel and other parts. This procedure is quite complex and requires a competent selection of materials and their colors. But after its completion, the car interior will fully correspond to your taste preferences.

You don’t have to limit yourself to covering all the parts with faux leather or beautiful thick fabric. To improve the appearance, it makes sense to use additional decorative accessories, which include, for example, neon lamps, multi-colored LED lamps and much more.

Improving the functionality of the salon

If your goal is not just to change the appearance of the car, but also to increase its functionality to a modern level, you can also perform a number of additional works:

replace the seats with large, wide chairs used in sports cars;
install a completely new dashboard, introducing the most modern audio systems, navigators and other equipment into it;
replace mechanical window regulators with a set of products with an electric drive. Today they can hardly be called a luxury, since these parts can be purchased as a complete set in any specialized store.

Tuning the interior of a VAZ-2106 car allows you to solve many different problems. It expands the functionality of the vehicle and provides protection for individual elements from damage and corrosion processes. In addition, you will be much more comfortable using a car that meets the latest trends not only in appearance, but also in the availability of modern options.

The work can be carried out by specialists from various companies that offer interior modernization services at very reasonable prices. But if you have the appropriate experience, tools and the desire to make a real “candy” out of your old “six”, it is better to do everything at home and on your own. Then driving a reborn car will be much more pleasant.

Source

Dependence of driving characteristics on dimensions and weight

A classic method of improving the traction and dynamic characteristics of a vehicle is to properly distribute the weight of both the vehicle itself and the luggage it carries. Speed tests have shown that rear-wheel drive cars (which is the VAZ 2106) when accelerating, shift part of the weight from the center of the car and the front axle to the rear. The latter leads to a greater load on the rear side of the chassis, which is an auxiliary effect when driving. This is due to an increase in the contact patch and an increase in the coefficient of adhesion of the tire to the road surface.

The standard dimensions and weight of the vehicle allow you to transport up to 150 kilograms of luggage or any other cargo. Weight up to 400 kilograms does not affect the dynamic performance of the car in any way. Achieving a maximum speed of 152 km/h is possible when fully loaded with luggage, driver and passengers. With the previous parameters, reaching the speed mark of 100 km/h is achieved in 17.2 seconds. If you have luggage weighing up to 150 kilograms, the amount of gasoline consumed per 100 kilometers at a speed of 90 km/h is ten liters and one hundred grams.

But no matter how much you reduce the weight of a vehicle, it will not be possible to increase power. Reducing the weight of the VAZ 2106 car and modernizing its body components will help improve dynamic characteristics. This can be achieved without changing the design of the body, power or traction units in the following ways.

Do not drive a car with a full tank of fuel, do not add fluid to the windshield washer reservoir. The weight of a full fuel tank is more than eighty kilograms, and the windshield washer tank weighs up to ten kilograms.
Forged wheels lead to the loss of 10–20 extra pounds.
Upgrading the suspension, replacing steel levers with aluminum ones, the overall dimensions of which are suitable, will reduce the weight by another couple of kilograms.
How much will replacing the muffler cost? About 25–30 kilograms.
Modernization of non-load-bearing streamlined parts of the car body will help to improve the aerodynamic properties of the car, provided that the dimensions of the car remain unchanged.

The above methods for making a car lighter are not the only or unique ones. How many are there? Yes, a lot. However, the fact that the VAZ 2106 weighs less affects not so much the speed indicators as the braking characteristics, handling, etc.

It is worth remembering that serious unskilled intervention in the design of a car without the appropriate equipment leads not so much to an improvement of the car, but to a deterioration in the quality of the vehicle, a decrease in the operating time of the car, as well as a threat to the health and life of the driver, passengers and other road users .

How much does the VAZ 2106 body weigh and what are its dimensions? People often ask on forums and car portals. Indeed, interest in the most popular car in the post-Soviet space was and remains incredibly high. Find out more by reading useful information on the body of this car. A lot depends on how much the body of the VAZ 2106 weighs, including the condition of the main parameters of the car.

VAZ 2106 - do-it-yourself interior tuning, photo

This car first left the assembly line in 1975. Taking the third model as a basis, the manufacturer modernized it, making a number of changes that affected not only engine power, but also design. The appearance of the body part has improved slightly, the interior has become more spacious and functional. Good quality materials that are easy to clean began to be used as cladding. And yet, the interior of the “six” looks somewhat old-fashioned. For this reason, most owners perform tuning work themselves.

Getting rid of noise and vibration

If you are planning to do interior tuning for a VAZ 2106 with your own hands, photo examples of which are presented below, then get ready to carry out a whole range of activities. You need to start with noise and vibration insulation, which will immediately improve the comfort of the car. When planning to replace seats, which will require welding work, insulation of the interior should be carried out after welding is completed.

Experienced craftsmen recommend treating the metal elements of the body part with anti-corrosion agents so that in the future you do not have to dismantle the soundproofing layer to remove rust. Today on the car market there are a lot of materials with which you can create good noise protection. To fix them, it is recommended to choose high-quality glue. To reduce the level of noise entering the cabin from the wheels, you can lay a carpet on the floor, carefully adjusted to size.

Modernization of the instrument panel

You can often see photos of the interior of a VAZ 2106 with a stylish instrument panel, which, when looking at the car, immediately attracts attention to itself. This is natural, a view of the car from all windows most clearly shows the driver’s instrument panel, so upgrading the panel in a VAZ 2106 salon with your own hands can be done in the simplest way: take a panel from a BMW E-36 and install it in place of the “six” instrument panel.

Panel tuning

Having completed the isolation, you can move on to this element. There are a number of ways to change the appearance of the dashboard:

The torpedo is painted with a liquid rubber compound. This option is the cheapest, but has one drawback - the rubber layer must be renewed periodically to remove the resulting scratches and chips;
decorative inserts are installed, which are made from polymers. But the material must be durable in order to avoid damage to the original elements during operation;
The torpedo is covered with artificial leather. Its diversity will help you turn any idea into reality;
The torpedo can be covered with vinyl films. This inexpensive method makes it possible to significantly change the appearance of the panel board;
New instrument lighting is being installed. A simple lighting system uses ordinary light bulbs, which consume a lot of energy and do not create much effect. Many people replace them with modern diodes, thus creating a good effect. It looks especially beautiful when light filters of different colors are used;
New scales are installed on the instruments. You can choose the colors you want.

Sheathing reupholstery

The next working stage is changing the trim on the seats, ceiling, door panels, gear shift lever, steering wheel and other parts.

This process is quite labor-intensive and involves a competent selection of materials according to their shades. But upon completion, the car’s interior will fully meet your wishes.

To reupholster the interior, you can use not only beautiful fabrics or artificial leather. You can improve your appearance by using additional accessories in the form of neon bulbs or multi-colored LEDs.

Vehicle weights

The actual weight of the car is 1045 kilograms. The main units of the “six” have the following weight:

140 kilograms - engine with equipment (starter, generator, carburetor, etc.);
26 kilograms - gearbox;
10 kilograms - square shaft;
52 kilograms - rear gearbox;
7 kilograms - radiator grille;
280 kilograms - car body.

It is noticeable that the body is the heaviest structural unit of the car. It weighs as much as two engines with all the components. The remaining mass of 530 kilograms is scattered between interior trim parts, wheels, fuel lines, brake lines and other things, the discrepancy in mass of which does not reach such large values.

An interesting fact is that according to all the norms and standards of the Soviet economy, the “six”, having an actual weight of 1045 kilograms, fell into the category of small class vehicles, but at the same time, thanks to the engine capacity of the VAZ 2106, it was a full member of group number three.

Increased functionality

If you want to not only change the appearance, but also improve the functional features of your vehicle, then you can take some additional measures. For convenience, the seats are replaced with those used in sports cars. A completely new instrument panel is installed, modern audio systems, navigation aids and other equipment are installed in it. Mechanical window lifts are replaced with similar sets with an electric drive. Nowadays, this is no longer considered an element of luxury, since such components can be purchased at any spare parts store.

Tuning the interior of the “six” makes it possible to solve a huge number of different problems. With its help, the functional features of the car are expanded and security is created for its individual elements.

Source

Alternative panel tuning option

To tune the interior of the “six” in an alternative version, it is recommended to stock up on plywood, several tubes of “liquid nails”, plumbing and carpentry tools, fasteners and fabric for upholstery. We carry out the work in the following sequence:

Using a pencil on the plywood, we mark out the elements of the dashboard, the locations for the instrument scales, and then cut out the individual panel elements. Do not forget about the stove faucet, the place for which must be beautifully cut out;
We take and adjust a small wooden block to the location for installation in the factory version of the panel. After that, we place it between the plywood sheets, so that it is integrated into the dashboard and secure it with self-tapping screws to the plywood;
We cut a place in the plywood for a radio or CD and for the manual transmission knob, as well as for the emergency lights and cigarette lighter;
After preliminary cutting and fitting of the base of the “six” dashboard, we cover the outer surface of the plywood frame with “liquid nails”, after which we carefully apply carpet-type cladding fabric;
After final drying, we install this structure in place of the dashboard.

Mitsubishi ACX characteristics
Niva tuning photo

Tuning the interior of the VAZ 2106

All car owners know that tuning the interior means giving it a new look, improving functionality and safety. With its help you can create an individual and unique style.

Interior tuning consists of several stages:

torpedo tuning;
instrument panel tuning;
beard tuning;
replacement or reupholstery of seats;
installation of a radio;
steering wheel tuning;
tuning the gear knob.

Let's look at each of these points in more detail.

Torpedo tuning

The top front panel of a car is called a torpedo. It is a solid metal structure covered with polymer foam and film. It contains an instrument panel, glove compartment, interior heater, air duct deflectors, and a clock.

The front panel is an important element of the interior, which can be tuned in different ways: replace the dashboard completely with a new one, paint it with liquid rubber, cover the smooth surface of the dashboard with leather, film or flock. Before starting tuning work, you need to remove the panel.

Torpedo dismantling

Removing the console occurs as follows:

After unscrewing the four fastening screws, we remove the storage shelf.

Tuning options for the VAZ 2106 torpedo

There are several options for tuning a torpedo:

You can replace the standard torpedo with a new one from domestic or imported cars. It is installed entirely with devices. Since the parts in the “classic” are interchangeable, panels from the VAZ 2105, VAZ 2107 are suitable for the “six” ;
cover the torpedo with liquid rubber. This option is labor-intensive, and such a coating is short-lived and will begin to crack over time. It will need to be updated periodically. The big advantage of this method is its low cost;
reupholstering the dashboard with vinyl film, flock, automotive leather or leatherette. This method of improvement is the most effective, but scrupulous and time-consuming. To carry out the work, it is necessary to dismantle the torpedo and take measurements from it. It is best to make a pattern from non-woven fabric. Using the pattern, cut out the component parts. Sew all the pattern pieces together with strong threads. It is advisable to work carefully so that folds do not form on the material, which will spoil the appearance. Then treat the surface of the console with hot glue and pull on the cover. And, using a hair dryer, glue the cover.

Instrument panel tuning

Modernization of the VAZ 2106 dashboard consists of replacing the backlight and decorative parts of the scales.

Replacing instrument panel scales and arrows

This process is quite simple and you can do it yourself:

At the start of work, we dismantle the instrument panel panel of the “six”
We gain access to the sensors and remove all indicator arrows, starting with the tachometer.
After this we remove the scales.
To remove the speedometer needle, unscrew the bolts and turn the scale to the left. After this, the instrument needle will drop slightly and begin to oscillate. As soon as it finally freezes, this position must be marked with a marker. All this is necessary so that the speedometer then indicates the correct speed.

Installation of the removed parts is carried out in reverse order. After which the panel is mounted in its original place.

Instrument panel lighting

Many car enthusiasts know that the “six” has weak instrument lighting. When upgrading the panel, you can add LED lighting. Before starting electrical work, be sure to disconnect the negative terminal from the battery.

Having dismantled the panel, we remove the devices one by one.
We take each of them apart.
We glue the links of the LED strip into the body. For small devices, one link of three diodes is enough. For larger ones you will need 2 or 3 links, depending on what lighting intensity you like.

Be sure to wipe the inside of the glass of the devices so that there are no fingerprints left.

Dashboard

A “six” car, the tuning of which can be done on your own, can be transformed beyond recognition. For example, if you purchase a new dashboard.

However, why spend money, and a lot of it, when you can create such a panel yourself, which will be much more economical and more fun?

To change the appearance of the panel, you can decorate it with some other devices. For example, an LED strip would look good. And then the fantasy kicks in. To purchase various components, you can go to a store or order some exclusive items online.

You can completely replace the VAZ-2106 panel with a new one by carefully and carefully dismantling the old one. In this case, it is necessary to ensure that the mechanisms that are attached to it are not damaged. You can just add lighting to the panel. Some experts, in order for the light to be diffused rather than directional, recommend dripping transparent glue onto the diodes. Then the light will be more subdued and soft.

Beard tuning

The center of the car interior is the console, which is called the beard. It acts as a continuation of the torpedo and attracts the attention of all passengers.

When tuning, you can place in your beard:

watch;
radio;
pocket for small items;
armrest;
USB sockets;
switches;
backlight

Typically, the beard for “classics” is made from plywood, fiberglass, or from spare parts from foreign cars.

Beard drawings can be found on the Internet or taken measurements from an old console. For the pattern, thick cardboard is used, which holds its shape well. The template is transferred to plywood and, after carefully checking the dimensions, cut out along the contour. Next, the parts are connected with self-tapping screws. The finished frame is covered with leatherette or other material in the color of the upholstery. The material is secured with a furniture stapler and glue.

"Six": tuning

You should not be afraid that major interior repairs will alter some characteristics of the car, because such improvements will not affect the performance of the car, but, on the contrary, will improve it. And the driver will be much more comfortable and pleasant to drive his “iron horse” from a brand new and modernized interior.

Most of the work on restoring the interior of a car can be done on your own at home, and only some of it may require the intervention of specialists in workshops.

Before starting reconstruction, you should thoroughly examine the “field” of activity and make a list of the necessary parts and materials for the VAZ-2106. Tuning the interior should not begin with thoughtless purchases of various things, which may later be either superfluous or not suitable for the car at all. After a thorough examination and drawing up a list of everything you need, you can begin to work independently.

However, before describing the steps to update the interior space, you should familiarize yourself with some parameters of the car.

Seats

Tuning VAZ 2106 seats can be done in two ways:

change the upholstery;
replace the seats by taking them from another car.

Seat reupholstery

To reupholster the upholstery yourself, follow the instructions:

Remove the seats from the interior. To do this, move the chair back all the way and unscrew the bolts in the runners. Then slide it forward and also remove the bolts. Remove the seats from the interior.

Installing seats from another car

Updated seat upholstery will decorate the interior, but will not make them ergonomic or comfortable. To do this, seats from another car are placed in the “six”. Seats with a distance between the runners of approximately 490 mm are suitable here. Many car owners say that seats from Ford Scorpio, Hyundai Solaris, VAZ 2105, VAZ 2107 fit well into the cabin . But to get a good result, you cannot do without replacing the fasteners.

Replacing seat fastenings

The slides on which the seats in the “six” are located are not located at the same level, so the old fastening requires replacement. To do this you need:

Move the seat back all the way and unscrew the front bolts. Then move it forward to the dashboard and remove two more screws from the runners.

DIY dashboard

Reconstruction of the VAZ-2106 (including interior tuning) can be carried out on your own in the garage or near the house in the open air. For example, it is not too difficult to make white panel dials with your own hands. Find the model you like and reprint it on paper. The signs can be painted in a dark tone using varnish or paint, and holes can be made where they are needed. The panel itself can be covered with leatherette. To do this, first of all, the old surface is cleaned, degreased, and then special glue is applied and the material is laid. After which they give it some time to dry.

At the end of the procedure, trim the edges of the remaining substitute. In the same way, you can update the entire interior of the car.

Radio tape recorder

No upgrade of the “six” is complete without installing a speaker system or at least a simple radio. A standard place for a radio receiver in the beard of a small-sized “six”. It should be trimmed to standard 1DIN. This can be done with a metal file. Then sand the edges with sandpaper.

Installing a radio

The radio tape recorder is attached to the beard using a metal case. Radio installation steps:

Having bent all the tabs, use special spatulas to remove the radio from the case.
The metal base is inserted into the prepared hole.
We fix it using special tongues.

Cables are included to connect the player. The most commonly used are:

black - “earth”;
red and yellow (often wound together) - ignition “+”;
blue - power for the active antenna;
white - front left (FL) speaker;
gray - front right (FR) speaker;
green - rear left (RL) speaker;
purple - right rear (RR) speaker.

You can connect the radio to the ignition switch to the free INT terminal. Then it will only work when the engine is running and the ignition is on. This connection scheme will protect forgetful car owners from completely draining the battery.

If you twist the red and yellow wires together, the radio will no longer depend on the ignition. You can listen to music with the ignition off too.

Speaker installation

A good place to place the speakers would be the front door panels. If you choose the right size speakers, they will fit here very well. To install, perform the following steps:

Remove the trim from the doors.
On the casing we cut a hole for the speaker. A hole of the required size can be made using a template. To do this, trace the speaker on paper. You need to work carefully so as not to miss the size.
We attach the column and screw it to the casing using the fastening that comes with the kit.
We carefully lay the wires in the cavity of the doors so that they do not sag or fall out.
We install the casing in place.

Don't forget to buy new fasteners for the door trim. Often, when removing the casing, the fasteners break.

Additional speakers are placed on the dashboard or on the side pillars of the windshield.

If the car owner changes the entire beard, creating it himself to his own size, then he can place a 2DIN radio in it. A player with a large screen will add charm to the appearance of the car.

Some craftsmen insert speakers instead of air ducts. But from personal experience I know that the standard “six” torpedo does not have side window blowing. In humid and cold weather, windows fog up and freeze. If you remove the air ducts for the windshield, the airflow will worsen even more. Therefore, I do not recommend this installation of speakers.

Video: installing speakers and Shumka

Antenna installation

The “six” did not have a standard antenna installed, but a place for it was provided on models before 1996. Adherents of original spare parts can find their original antenna on the car market. It is attached to the front fender of the car.

To do this, you will need to make a hole in the wing, install the antenna, tighten the bolts and connect the wires to the radio and ground. This installation method is quite complicated and not every car owner will decide to make holes in the body.

The ease of installation is distinguished by the interior active antenna, which is attached to the windshield. It is not exposed to precipitation, does not require additional care, and does not interfere with aerodynamics when the car is moving. When purchasing an interior antenna, please note that the kit should include instructions, fasteners and stencils to simplify installation. There are two ways to install a radio antenna inside the cabin:

The housing is attached to the glass behind the rear view mirror, and the whiskers are glued in opposite directions at the top of the glass.
The antenna body is secured to the top of the windshield on the passenger side, and the poles are glued along the edges of the glass at right angles to each other.

Steering wheel tuning

A comfortable and beautiful steering wheel contributes to comfortable driving. To achieve this, in the “six” you need to update the steering wheel in the following ways:

install a steering wheel from another VAZ model;
replace with sports one;
retighten the steering wheel.

Installing a steering wheel from another VAZ model

The simplicity of the Zhiguli allows you to replace the steering wheel with a steering wheel from other VAZ models. Many car owners believe that it is not worth the work and effort that needs to be put in.

The steering shaft of the chisel is thinner than the classic one, and not by much, that is, it is not very easy to make an adapter for the hub. Plus the steering wheel is higher, normally it won’t engage the turn signal bump stop. In a word, you need to suffer a lot to install it properly. As for me, it’s not worth it, if you really want a normal steering wheel, then you need to go and buy it, the choice is very rich right now, but you need to look at them carefully, there are so many leftists that it’s just terrible.

https://autolada.ru/viewtopic.php?t=26289

Replacing with a sports steering wheel

A sports steering wheel will give the car a beautiful and aggressive look. You just need to know that the “six” is not intended for sudden maneuvers. The sports steering wheel has a smaller diameter and is more difficult to make turns with, so you need to get used to it.

Steering wheel reupholstery

In an auto store you can find braiding on the steering wheel for re-upholstering with your own hands. Such kits include the braid itself made of genuine leather, strong threads for sewing and a special needle.

Video: dismantling the steering wheel

Tuning the interior of the “six”

Most Russian fans of this car believe that the “six” is very convenient for tuning the interior, because a sufficiently large volume of internal space has been structurally created in it. This is extremely important for replacing seats, as an element of finalizing this modification of the Lada. Installing, for example, “Scorpion” seats from such a Ford model will give the interior the interior of a sports car, and this impression will be enhanced by installing a stylish “dashboard” and steering wheel.

You can purchase these elements of the car interior at salvage yards, and their price will be reasonable due to the low popularity of such spare parts among buyers. When tuning the interior of a VAZ sixth model, it is very important, if the vehicle has already been modernized in some style, to continue decorating it in this design direction. For example, if the tuning of the Six’s interior is close to a retro style, then the modernization of the components of the interior compartment should continue in a similar direction.

The same applies to the design of tuning the interior of the Zhiguli 2106 in a sporty style, especially since the Scorpio seats will complement the sporty style and create the illusion of driving a sports car. When tuning the interior of a VAZ 2106 with your own hands, you can use the free volumes of the “six” interior, and the installed interior components, selected in one style solution at dismantling yards and auto shops, will significantly change its appearance and design.

When upgrading the interior of a Six with your own hands and installing seats, you may get the false impression that rearranging the seats will not be difficult and it’s just a matter of unscrewing the fasteners. We warn you that this is quite a large job, because you will have to change the seat guides, because... The regular ones from the “six” are not adapted for foreign cars.