How to check the overall and geometric dimensions of the VAZ 2110 body visually or instrumentally?

The VAZ 2110 car was produced from 1995 to 2007. This sedan was created on the basis of the Lada 2108 hatchback. The dimensions of the VAZ 2110 differ slightly from the overall dimensions of the 21099 model. In particular, the length of the VAZ 2110 is only 6 cm longer than the length of the only sedan from the Lada Samara model range.

The length of the wheelbase is 3.2 cm longer, the height of the car is 1.8 cm, and the ground clearance of the loaded “ten” is 5 cm higher than that of the ninety-ninth. The front and rear wheel tracks of these sedans are the same. The same engines and gearboxes were installed on both cars.

However, despite all this, the technical characteristics of cars 2110 and 21099 are somewhat different. Despite its greater weight, the VAZ 2110 develops a higher maximum speed and shows better maneuverability thanks to smooth body lines and more advanced control systems. Undoubtedly, the VAZ 2110 is the best car produced at the Volzhsky Automobile Plant in the 90s.

Body parts most susceptible to deformation

Sharp braking or untimely start provoke, first of all, damage to the bumper.
If it is insignificant, then during repairs it is possible to achieve the performance of standard geometry. In the presence of complex deformations, this cannot be done, so it is easier to replace the damaged body part with a new one. If the owner of the car does not take enough care of the condition of the body, then those parts that have close contact with the road surface are quickly eaten away by corrosion. And repairing the hood, doors and hidden body parts instead of timely prevention is already more difficult and expensive.

Which wheels are suitable for VAZ 2114 and VAZ 2115

Characteristics of Renault Logan: overall body dimensions and weight
These models, produced at AvtoVAZ not so long ago, were very popular and are actively used today. The 14th model became a restyled version of the VAZ-2109, and the “tag” became the VAZ-21099. Both of them are part of the LADA Samara line.

Standard wheels for these vehicles are 13″ in diameter. If wheels for VAZ 2114 R13 are used, tires with a sufficiently large profile are installed on them.

In addition, it is possible to equip the car with other wheels, including those with a larger diameter. At the same time, you can select accessories without tuning the car. If you want to equip the iron horse with wheels with a diameter of 14 inches, you don’t need to make any special calculations (the only thing you need to take into account when it comes to wheels for the VAZ 2114: the landing parameters should vary from 5 to 6″ (this is indicated in the documentation for the car) ). In this case, the most recommended tire options for installation are: 185/60 R14 and 175/65 R14 (car enthusiasts are more likely to lean towards the first type of tire).

Wheels for VAZ 2114 R15 can also be used to equip a vehicle. However, in this case it is necessary to choose low-profile tires. And we should not forget that since such equipment is not provided by the manufacturer, this point can lead to problems when the car undergoes periodic inspection.

Similar wheels are installed on the Lada 2115. If we consider tires and wheels for the VAZ 2115: the (standard) parameters are as follows:

• 13 / 5.0J PCD 4×98 ET 40 TsO6, 175/70 R13;
• 14 / 5.5J PCD 4×98 ET 37 TsO6, 175/65 R14
• hub diameter - 58.5 mm

It is also possible to equip the “tag” with 185/60 R14 wheels. As a tuning option, we can select models with dimensions 195/50 R15. If we consider tires and wheels for the VAZ 2114 R16, as well as an option with the same diameter for the VAZ 2115, then the possibility of installing 205/45 R16 wheels cannot be ruled out.

When equipping a car, it is necessary to choose wisely not only wheels, but also tires. Properly selected wheel assemblies largely ensure the safety of the vehicle on the road.

Subtleties of body repair

Body repairs are most often carried out after an accident, but also if some parts are rusty. But you should still try to avoid welding and other work that involves thermal heating of the metal.

Small scratches and chips can become a source of corrosion in the future. In order to avoid this, it is best to tint small defects. Details: https://vazweb.ru/desyatka/obschee/kak-podkrasit-skolyi-na-mashine-samomu.html

If possible, try not to remove bezels. This can also lead to changes in body geometry. And after any repair work related to the body, be sure to check its linear dimensions.

Technical characteristics of VAZ 2110

VAZ 2112 trunk volume with seats folded. all cars are vases. geometric dimensions of openings

Dimensions of VAZ 2111 station wagon: dimensions

Buyers of the VAZ-2111, as a rule, are people who quite often have to transport various cargoes. Accordingly, the first place here comes to such points as carrying capacity and luggage compartment capacity. However, sometimes potential buyers are interested in all the dimensions of the VAZ-2111 - a station wagon.

Some of the modifications of the “eleventh” differ in their sizes

Naturally, the VAZ-211 is considered by potential buyers as a passenger truck. The station wagon body allows you to “take on board”, including bulky cargo, which is simply impossible to stuff into a sedan, and can hardly be placed in a hatchback. However, sometimes potential buyers are interested in all the dimensions of the car - size can matter, for example, if you have a non-standard garage. So, let's look at the main characteristics of the “eleventh”. In particular:

• length - for almost all modifications it is 4,285 millimeters. The only exception here is the VAZ-2111 “Tarzan” with 1.7 and 1.8 liter engines. They are slightly shorter - 4,255 millimeters;
• the total width, including mirrors, is 1,680 millimeters for almost all modifications. "Tarzans" is also different here. They are slightly wider than the others - 1,710 millimeters;
• height – the situation is exactly the same here. For almost all modifications this parameter is 1,480 millimeters. “Tarzans” stands out here too. They are taller - 1,610 millimeters.

Technical characteristics of VAZ 2110

Modifications of VAZ 2110

• VAZ-21100 (8-valve petrol carburetor engine with a working volume of 1.5 liters was produced from 1996 to 2000);
• VAZ-21101 (8-valve gasoline injection engine with a working volume of 1.6 liters, produced since 2004);
• VAZ-21102 (8-valve gasoline injection engine with a working volume of 1.5 liters);
• VAZ-21103 (16-valve gasoline injection engine with a working volume of 1.5 liters, produced since 2001);
• VAZ-21103M (16-valve gasoline injection engine with a working volume of 1.5 liters, produced since 2001);
• VAZ-21104 (16-valve petrol injection engine with a working volume of 1.6 liters, produced since 2004);
• VAZ-21104M (16-valve gasoline injection engine with a working volume of 1.6 liters, produced since 2004);
• VAZ-21106 GTI 2.0 16V (16-valve Opel C20XE petrol engine with a displacement of 2.0 liters);
• VAZ-21106 Coupe (variation of a car in a coupe body);
• VAZ-21107 (Sports modification of the VAZ-21106 car);
• VAZ 21108 “Premier” (extended by 17.5 cm, has additional handles on the rear doors, enhanced sound insulation);
• VAZ 21109 “Consul” (limousine with five doors, a glass roof and an interior made of wood; non-serial production);
• VAZ 2110 RPD (Sports variation of the VAZ-2110 car with a rotary piston engine).

Related models based on family

LADA 1106

VAZ-21106 late modification

A joint project of the AvtoVAZ company and, created on the basis of the VAZ-2110 car for its homologation in the WRC group.

The concept car exhibited at the MIMS-96 exhibition was called “Yellow Shark”. The concept car was equipped with original yellow Slik wheels.

The Mega-Lada Motor-Sport engine is based on the “eighty-third” block. Later it was replaced by the Opel C20XE 16V with 150 hp. With. Engines, gearboxes and other equipment were supplied by the sports department of the English branch of General Motors - Vauxhall. Cars of the “budget” configuration were distinguished by the Opel Ecotec X20XEV engine with a power of 136 hp. With.

Initially, the car was equipped with Lockheed brakes.

The body of the VAZ-21106 differs from the VAZ-2110 in the rear and front fenders with extended wheel arches. An external plastic body kit was installed on this car. Subsequently, at the request of customers, this body kit began to be installed on regular “tens”, the kit was called “Nola”.

In 1998, the design of the car was changed due to the popularity of the model among the special services. In 1999, the car's design was changed to a more practical one. The shape of the bumpers was changed, and the plastic trim on the doors and hood was removed. According to the manufacturer, this reduced the noise level inside the car when driving at speeds above 200 km/h. Some cars had a minimal body kit similar to the 21106 "C" and sometimes had two oval air intakes on the hood.

In 2003, the plastic body kit was replaced with a completely different shape. There were also releases with a complete lack of body kit, with the exception of extended wheel arches.

was installing an air conditioning system in the cabin. A hydraulic booster from the German company ZF was installed in a car of any configuration.

A version of the VAZ-21106 with a coupe body was produced.

The car received a prize from the magazine “Behind the Wheel” - “For the best exhibits of MIMS-96.”

Modifications

• VAZ 21107 is a modification for rally competitions. Welded safety cage, different suspension design. Pre-manufactured at the VAZ Scientific and Technical Center, they were tested and refined. Testing on English rally tracks was carried out by Alistair McRae.
• VAZ 21127 is a modification with a VAZ-2112 body. Increased engine power.
• VAZ-21106 “C” Coupe - modification with a coupe body, Opel C20SEL engine with a power of 136 hp. With.
• VAZ 21106 WTCC - participated in the 2008 FIA WTCC international championship, used by the Russian Bears Motorsport team. B was used by the Lada Sport team.

LADA Tarzan 2

VAZ-2111-90 Tarzan-2

A family of passenger cars produced by AvtoVAZ. The family consists of VAZ-211290 and VAZ-211190.

In 1999, the Lada-Consul enterprise, together with the design organization DECON and the STC OPP AVTOVAZ, created an SUV called Tarzan 2. This car had a body from the family of the front-wheel drive VAZ model (VAZ-2112) and a frame with the main units from the Niva car installed on it (suspensions, gearbox, transfer case, steering). The units, except for the cardan shafts (the length was changed), springs, shock absorbers and frames, were used from mass-produced VAZ cars. The body is mounted on the frame via rubber pads. The rear suspension was borrowed from the Niva, which also entailed the transfer of the gearbox and drive shafts. The rear brakes are similar to the front ones, that is, disc brakes, 15-inch wheels. Despite the 150 kg increase in weight relative to the Niva, the fuel consumption of the new all-terrain vehicle, thanks to good aerodynamics, turned out to be noticeably less.

There were also changes in the design: the joints of the frame and body were closed with powerful pipes in the form of sills, linings on the wheel arches, which gave a new shape to the wings and the size of the arch, and linings made of pipes under the front and rear bumpers. In the cabin, the lining of the central tunnel has changed: the lining from the VAZ-21213 was used, and there were three levers on it (the gearbox and two more to control the transfer case).

The cars were made to order; the total number of Tarzans produced did not exceed several hundred.

Review of VAZ-2110

The VAZ-2110 sedan has been produced since 1995. Initially, the car was equipped with a 1.5 liter eight-valve carburetor engine. Subsequently, only injection engines were installed on the “ten”: 1.5-liter eight-valve (modification VAZ-21102) or 16-valve (21103); 1.6-liter eight-valve (21101) or 16-valve (21104). In addition to the sedan, versions with hatchback (VAZ-2112) and station wagon (VAZ-2111) bodies were also produced.

In 2007, after the appearance of the Priora, the production of the “ten” in Tolyatti was curtailed. However, their production continued in Ukraine from vehicle kits supplied by AvtoVAZ. In 2010, sales of Ukrainian-assembled cars began in Russia under the name “Bogdan 2110” (on the Ukrainian market the car is sold under the Lada brand).

Source

• wroom.ru/cars/lada/2110#1
• autodelo.info/catalog/auto/model/1993/
• wikiweight.info/tehnika/kuzova/massa-kuzovov-vaz-2110.html
• zen.yandex.ru/media/id/5d42cf85f0d4f400ae3f3ecf/tehnicheskie-harakteristiki-vaz-2110-desiatka-5d45b901fbe6e700adf3f88d
• carexpert.ru/models/vaz/2110/tech/vaz100s.htm

VAZ-2110 Tank volume, trunk Load capacity Fuel consumption

History of the Lada 2106 car and its modifications

Motorists, in front of whom VAZ was developing and putting into production the “ten”, exclaimed with one voice: “If only it had appeared 10 years earlier, it would have been a very interesting car!” The VAZ-2110 car, indeed, could create the image of a modern, by world standards, manufacturer for the plant. The first samples of the car appeared in 1989, they looked fresh and modern, and the technical solutions did not lag behind those used in the models of leading European manufacturers. Important innovations were fuel injection and an on-board computer, which were being introduced around the world on low-cost cars at that time.

VAZ 2110 | Dimensions | Lada

Dimensions

Dimensions of two body options

Station wagon dimensions

Saloon, hatchback or station wagon (Turnier): Mondeo plays on the entire keyboard. In terms of width, measuring 1931 millimeters, there are no differences between them. The picture is different in terms of length - the maximum is 4804 millimeters for Turnier, in the other two versions it is 4731 millimeters. In terms of height, each model variant goes its own way: depending on the design of the chassis, the sedan body has a height in the range of 1420–1460 millimeters, the hatchback body, respectively, 1429–1459 millimeters and the Turnier – 1441–1471 millimeters. With a roof side rail, the height of the Turnier increases by another 40 millimeters. However, there is complete agreement on the wheelbase: 2754 millimeters is a good indicator for a high-middle class car. In addition, the Mondeo stands out for its large interior, which can accommodate five adult passengers.

Even in the rear seats, three medium-sized Europeans do not feel afraid of space. Mondeo passengers can also travel with more than just hand-luggage: the sedan and hatchback have a maximum volume of 500 liters, according to VDA standards – including a spare wheel. In Turnier, a loading volume of 540 liters is already available with a spare wheel. When the rear seat is folded down, the hatchback model will take 1,370 liters up to the roof, and the Turnier will swallow even 1,700 liters.

Geometric dimensions of the “two-piece”

VAZ 2112 is one of the most popular models among the cars produced by the domestic automotive industry. It is relatively inexpensive, has a good design and different body styles.

The main geometric dimensions of the body of this car are as follows (in mm):

• length – 4170;
• width without mirrors – 1680;
• height – 1435;
• width with mirrors – 1875;
• rear door opening diagonal – 1320;
• short diagonal of the rear side window frame – 230;
• the distance between the center of the upper beam of the rear door opening to the middle of its lower beam is 1050;
• the long diagonal of the rear side window frame is 710.

The rarest body type of the 2112 is a coupe, or three-door hatchback. This is a sports model, it stands out from others, which are monotonous in terms of the geometric dimensions of the body. It was the design features of the VAZ 2112 coupe that allowed the model to become in demand at one time. However, after ten thousand examples of the 2112 coupe were produced, production ceased, so it is considered a rare model.

Several modifications of the VAZ 2112 were equipped with hatches, which greatly increased the comfort of the driver and passengers on the road. The geometric dimensions of 2112 made it possible to equip the car with many additional functional capabilities.

Technical features of LADA 2110

Compared to the VAZ -21099 model, the performance characteristics of the “ten” were significantly improved. So fuel consumption with a 1.5-liter engine became 7.5/100 km, which is 12% less than the previous model, and the maximum speed was also increased to 162 km/h.

The model with an 8-valve 79-horsepower, 1.5-liter engine already developed 170 km/h and went to “hundreds” in 14 seconds. The engine fit perfectly into heavy city traffic due to its torque and elasticity.

The engine version with a twin-shaft 16-valve head, 1.5 liter capacity, produced 94 hp. and provided acceleration to “hundreds” - 12.5 s and a maximum speed of 185 km/h.

Modifications

• VAZ-21120 - with a 16-valve engine with distributed fuel injection, displacement 1.5 liters. 14 inch wheels.
• VAZ-2112-37 is a racing model of the VAZ-2112, prepared for the “ring” in the Lada Cup qualifying group. Engine VAZ-2112, 1.5 l, 74 kW/100 l. s., Hatchback body, number of doors – 5, number of seats – 1, equipped with a safety cage, external aerodynamic kit, front extension of the strut support cups.
• VAZ-21122 - with an 8-valve engine with distributed fuel injection, displacement 1.5 liters, 13-inch wheels.
• VAZ-211223 is a three-door hatchback of the VAZ-2110 (“coupe”) family.

Dimensions of VAZ 2110 - length, height, ground clearance

The VAZ 2110 car was produced from 1995 to 2007. This sedan was created on the basis of the Lada 2108 hatchback. The dimensions of the VAZ 2110 differ slightly from the overall dimensions of the 21099 model. In particular, the length of the VAZ 2110 is only 6 cm longer than the length of the only sedan from the Lada Samara model range.

The length of the wheelbase is 3.2 cm longer, the height of the car is 1.8 cm, and the ground clearance of the loaded “ten” is 5 cm higher than that of the ninety-ninth. The front and rear wheel tracks of these sedans are the same. The same engines and gearboxes were installed on both cars.

However, despite all this, the technical characteristics of cars 2110 and 21099 are somewhat different. Despite its greater weight, the VAZ 2110 develops a higher maximum speed and shows better maneuverability thanks to smooth body lines and more advanced control systems. Undoubtedly, the VAZ 2110 is the best car produced at the Volzhsky Automobile Plant in the 90s.

dimensions

As noted above, the 2110 sedan turned out to be wider, taller, longer and heavier than the cars of the base family. This happened thanks to the desire of the designers of the Volzhsky Automobile Plant to increase the space in the car interior and increase comfort for the driver and passengers.

Thanks to the increase in the wheelbase and the width of the body, the car has become much more spacious; the semi-recumbent driver's seat, so characteristic of the Lada Samara family, has become a thing of the past; there is more space for passengers sitting in the back. The 110 family became the mother family for the premium Priora model. Overall dimensions of VAZ 2110:

• body length (including bumpers) - 426.5 cm;
• wheelbase length - 249.2 cm;
• height when equipped - 142 cm;
• distance from the front axle to the end of the bumper - 829 mm;
• distance from the rear axle to the end of the bumper - 944 mm;
• body width - 168 cm;
• the distance between the tips of the side mirrors is 187.5 cm;
• front track - 140 cm;
• rear track - 137 cm;
• maximum ground clearance (empty car) - 18 cm;
• ground clearance (unloaded car and driver) - 17 cm;
• minimum ground clearance (driver, 4 passengers and luggage) - 16.5 cm.

It is worth noting that ground clearance is based on 13-inch wheels with 175/70 tires, or 14-inch wheels with 175/65 tires. When using other wheels or tires, the ground clearance will be different.

Specifications

During the production of the 2110 model, the Volzhsky plant created more than a dozen different modifications of this sedan, including the Consul limousine with a greatly increased wheelbase. However, most of the cars were produced in the following modifications:

1. 2110-010.
2. 21102.
3. 21103.

Technical characteristics of model 2110-010:

• curb weight - 1010 kg;
• maximum weight of passengers and luggage - 470 kg;
• engine brand - 2110;
• power type - carburetor;
• volume - 1.5 liters;
• power - 72 hp;
• acceleration to 100 - 14 s;
• highest speed - 165 km/h;
• average gasoline consumption in the combined cycle is 6.6 liters.

Technical characteristics of model 21102:

• curb weight - 1020 kg;
• maximum weight of passengers and luggage - 460 kg;
• engine brand - 2111;
• power type - distributed injection;
• volume - 1.5 liters;
• power - 76 hp;
• acceleration to 100 - 14 s;
• highest speed - 170 km/h;
• average gasoline consumption in the combined cycle is 7.1 liters.

Technical characteristics of model 21103:

• curb weight - 1060 kg;
• maximum weight of passengers and luggage - 455 kg;
• engine brand - 2112;
• power type - distributed injection;
• volume - 1.5 liters;
• power - 93.5 hp;
• acceleration to 100 - 12.5 s;
• highest speed - 185 km/h;
• average gasoline consumption in the combined cycle is 7.2 liters.

According to the manufacturer's recommendation, the weight of the towed trailer should not exceed 500 kg.

expertvaz.ru

Body dimensions VAZ 2110

The maximum length of the body of a VAZ 2110 car is 4265 (mm), the maximum width is 1695 (mm), the maximum height is 1450 (mm).

Standard dimensions of VAZ 2110 bodies:

VAZ 2110 (Lada 110) is a front-wheel drive car in a 4-door sedan body, which was mass-produced in Russia from 1995 to 2009.

In total, one generation of this model came off the assembly line, for which 6 modifications are available.

Range of body sizes for VAZ 2110:

• Length: from 4260 (mm) to 4265 (mm);
• Width: from 1680 (mm) to 1695 (mm);
• Height: from 1420 (mm) to 1450 (mm);
• Wheelbase: from 2490 (mm) to 2492 (mm).

The standard ground clearance for all modifications of the VAZ 2110 is the same 170 (mm), and the width of the front and rear tracks does not match - 1400/1370 (mm) or 1446/480 (mm), which can negatively affect cross-country ability.

Important: the recommended difference in the track width of the front and rear wheels should not exceed the tire width by more than 25-30%.

Trunk volume of VAZ-2112 in liters with seats folded and unfolded

It is due to the volume of the trunk that this car model has clear reactions when cornering and a sporty handling character compared to its predecessors. The VAZ-2112 is especially popular due to the fact that it combines the advantages of the 2110 and the type of rear seat 2111.

Extra space

Despite the very short body, the trunk volume can be increased by folding the rear passenger seat. Being divided into two parts, the backrest of the rear passenger seat folds independently of the other half. So, someone can sit on one side, and the other will be folded. It is this feature that makes the station wagon as convenient as possible for transporting not only people, but also small-sized luggage.

In 2008, due to the new developed model of the Lada Priora, the VAZ-2112 was discontinued without waiting for the expansion of production in Ukraine.

Trunk of a sedan or sports car

If the VAZ-2112 was initially planned as a sports car, then after shortening the rear overhang, raising the contours and installing a 16-valve engine instead of an 8-valve one, a practical copy of the sedan was obtained.

Agree, this is not the first time that VAZ plans one thing, but creates something completely distant from what was planned.

The VAZ-2112 cannot be called a full-fledged sedan due to the fact that the size of the luggage compartment is 50 liters smaller than that of a family car.

The average sedan has a trunk volume of 450 liters, and the VAZ-2112 has 400 liters. But the advantage of this model is the large opening, which allows you to load bulky items. Among the models of its brothers 2110 and 2111, the station wagon is considered the leader in luggage compartment capacity.

Characteristics of the luggage compartment of the VAZ-2112:

• length – 925 mm;
• length including folded seats – 1483 mm;
• tailgate height – 516 mm;
• tailgate height – 982 mm;
• opening width – 900/930 mm;

Body features of the “tens”

The VAZ 2110 or simply “ten” is equipped with a load-bearing structure body. This is a 4-door front-wheel drive sedan that has adopted some features from its predecessor, the VAZ 21099.

Note. This does not mean at all that the “ten” does not have individual traits. On the contrary, like any creation of the VAZ automobile industry, the model is distinguished by a set of characteristics unique to it.

In fact, the VAZ 2110 was predicted as a modification of the G8 back in 1983. Later, this base was used for the manufacture and production of a completely new car. In the meantime, the designers decided to modify the VAZ 2108 into 21099, leaving the idea of ​​creating a VAZ 2110 for the future.

Note. According to rumors, the work at that time to create the “ten” required major changes in the design and structure of the body, which inevitably led to higher prices. At that time, AvtoVAZ was not yet ready for this.

The “ten” entered mass production only in 1991. The production of the new sedan, which, unlike its relatives, does not, oddly enough, have its own name, was continued at VAZ in 1995. Three years later, they started producing a station wagon.

Note. The VAZ 2110 at that time was the only model whose body was sold in three ways.

By 1996, the VAZ 2110 was losing its popularity, which can be explained by significant progress in the global automotive industry. A modern and progressive car, once technologically advanced, represented by the VAZ 2110, ceases to be such and loses its attractiveness. Although, on the other hand, this would not have been said at that time about the sedan, which still sells well to this day.

It was in 1996 that the “ten” began to be mass-produced in a sedan body type. The designers modernized a number of body elements and introduced various innovations. For example, one of the innovations is the introduction of gas stops into the hood of a car.

The VAZ 2110 was considered an expensive car at that time. And this is not surprising, because the engineers of the domestic automobile industry tried to modernize this car as best as possible. They even included the possibility of installing an air conditioner in the cabin. The trunk turned out to be a sight to behold – large and roomy.

True, the sedan could not compete with the station wagon in terms of luggage compartment capacity, but the same cannot be said regarding ease of use. So, due to an unsuccessful design, the hinges on the station wagon took up a considerable part of the useful volume of the trunk. In addition, the inconvenience of loading things into the trunk of a station wagon was added by the overly inflated wheel niches.

In the sedan, on the contrary, the trunk is well designed. The space for the spare tire stands out especially clearly. The wheel rim can be placed here upside down, which allows you to compactly load various things and tools into yet another free space.

As for the next modification of the “ten” called VAZ Premier, it is an exact copy of the VAZ 2110, only with an elongated body. The production of this model implied the use of an original set of body parts. They do not fit the sedan body. In addition, when designing the Premier body, engineers took care of giving it additional rigidity.

The floor was primarily reinforced. The suspension has been modernized and is more rigid than the sedan's. The total weight of the car has increased by 65 kg. As for painting, it was carried out in the same way as on the VAZ 2110 sedan.

We hope that the information provided in the article will help in your specific situation. If you will be checking the geometry and restoring it yourself, we recommend that you carefully study the photos and videos.

VAZ 2110 cars that leave the factory assembly line have clearly verified body dimensions.

However, few people pay attention to them when buying.
As a rule, a driver begins to become interested in the dimensions of the body of his car in the following cases: With proper body repair, the geometric dimensions can only be checked by taking measurements

1. There are plans to buy a car of this brand second-hand, but the buyer wants to make sure that the vehicle has not been in an accident before. will help answer this question.
2. The driver himself got into an accident. This could be a collision with another vehicle or a tree, curb, wall, etc. Will be needed. In addition, the driver will have to select tools (for example, find out).

Characteristics of the Bogdan VAZ 2110

• However, in terms of dimensions, everything is no different from the usual ten. The length of the car is 4265 mm. The width of the car is 1680 mm. Height 1420 mm. Tank capacity is 43 liters. The mass of the car in kilograms is 1030.
• Ground clearance of 170 millimeters, you can get stuck even in an ordinary puddle. Acceleration to hundreds, stated
• The manufacturer doesn’t set it to 12 seconds, but 30-40 seconds will be checked at the point; in principle, you won’t be able to accelerate very much on our roads. On a full tank it can travel almost six hundred kilometers.
• Five-speed manual transmission. It has its own errors, the third speed may go out.
• The steering wheel is covered with eco-leather, adjustable only in height, there is no adjustment for reach. Not very comfortable for a tall person.
• 5-seater sedan, equipped with a trunk with a volume of 450 liters. Quite roomy, even a baby stroller will fit in its cathedral form.
• The trunk is opened from inside the car.
• Installed 14 tires 185*65, wheels made in China. Although now almost everything is Chinese, so it’s not surprising.
• Front brakes are disc, rear drum.
• The adjustment of seats and mirrors is completely mechanical. The fuse box is accessible and fuses are easy to change.

Salon

The interior decoration is quite simple, no, of course, for its time - it was a breakthrough in the domestic automobile industry. But, in modern times, all this is poor and wretched.

The front panel was created with an eye to the famous Samara, with the same functionality. The steering wheel, with a two-spoke shape, was also taken from there.

The central block of the console does not present anything surprising. The huge grille of deflectors dominates everything, below is the block responsible for controlling the “stove” modes. Underneath all this is a car radio, which, by the way, was not included with the car.

Compared to other VAZ models, the seat structure was acceptable. More sensitive lateral support, as well as a cushion with an improved profile. The rear row of seats, although it allowed three passengers to sit, did not offer sufficient comfort. There was little space, both in width and the space between the front and back row seats was not enough for legs.

The luggage compartment corresponded to the size of its classmates, and in the stowed position it provided 450 liters, which can be increased by removing the rear seat backs.

Length of VAZ 2110: body and dimensions

Characteristics

For many, especially lovers of foreign cars, the question of the merits of the VAZ 2110 still remains controversial. However, their presence is indicated by the number of cars still running on the roads of Russia and the CIS countries today. The “Ten”, produced since 1997, received a sedan body, while the body length of the VAZ 2110 was 4265 mm, which is only slightly less than that of the station wagon (VAZ 2111) and hatchback (2112). However, this body length of the 2110 looks the most organic among the “tenth” family.

VAZ 2110 body diagram

Body reliability

Even if compared with the same VAZ cars - eights and nines, the bodies of the VAZ Lada 2110 are more reliable and resistant to corrosion. All-metal, made of metal with good performance, having partially galvanized parts, the bodies come off the assembly line with factory anti-corrosion treatment.

However, we should also pay tribute to our car owners. They, remaining adherents of domestic technology, despite all its shortcomings, themselves take care that the bodies serve for a long time and reliably. Therefore, they almost always add their own to the standard anti-corrosion treatment.

And then they also make sure that it is in place, and if necessary, they “touch up” the bottom of the car, treat the sills, fender liners, etc. with Movil. And although the oldest VAZ 2110 is already more than fifteen years old, you are unlikely to find completely rusty ones among them, because their owners love and cherish them.

Body advantages

Although the VAZ 2110 body is classified as a development corresponding to the golf class, it shows very decent parameters in this segment. For example, due to the sufficient length of the body, the car has a very spacious trunk volume.

In the usual configuration, it is 415 liters, which is already a lot and allows you to transport not only the essentials (spare wheel, jack, keys), but also many things - from supermarket purchases to camping equipment. And if you fold the rear seats, the car's capacity increases to 1270 liters.

Transformation of the VAZ 2110 interior

Considering that the length distance between the centers of the VAZ 2110 wheels is 2495 mm, plus the length of the luggage compartment is 944 mm, this results in almost 2 meters of additional “luggage” space. That is, if necessary and if you have a mattress, you can sleep here - relax on a long journey, or not take it, and then set up a tent when you go to the sea or river for the weekend. In addition, the car is thus “protected.”

Ageless model

In Togliatti, this VAZ model was produced for 10 years, but since 2007 it has not left the assembly line, which, however, does not mean that it does not exist at all. From components supplied by AvtoVAZ in Ukraine, they are still produced in the city of Cherkassy. True, they come out under the Bogdan 2110 brand, but in essence, they are still the same “ten”.

People's love

The name “matryoshka” is reliably assigned to the VAZ 2110, and it comes from some visually noticeable “inconsistencies” of individual body elements. In addition, the ten-sedan is sometimes called a “pregnant antelope”, although this nickname was given to it at the beginning of its release, until they got used to the peculiar design of the car body - a “plump” middle and a slightly angular shape of the “bow” and “stern” .

VAZ 2110

And yet, even these small absurdities of the body did not become an obstacle to the popular love for the ten. The same arrival of Priora on the Russian automobile industry market did not make the previous model unclaimed. And for sure, the beloved VAZ 2110, one of the most successful Russian designs, will roam our roads for a long time to come.

Body geometry and its diagnostics

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

The most important components of body geometry are called control points. It is the knowledge of their location and the ability to correctly measure the distances between them that determines the structure of checking the body for deformation. You can learn more about control points from the technical documentation for each car model.

After identifying damage, the integrity of the body is usually restored in special workshops. Experienced straighteners bring the body back to normal in the shortest possible time, if only the deformations are of moderate or minor severity. A body that has been in a serious accident and has received a lot of deformation is usually easier to replace with a new one.

What deformations can occur on the VAZ 2110?

The “Ten” involved in the accident will have certain deviations from the standard positions marked at the factory. And destruction in this case means the following:

• Deviations in terms of the standard wheel arrangement, as evidenced by poor vehicle stability and increased tire wear;
• The diagonals, again, standardly installed at the factory, are violated. Doorways, pillars and other areas of the body, one way or another, associated with the impact zone are especially often affected.

In most cases, the destruction of functional elements is associated with the appearance of folds in the floor or other components of the body. In addition, external impacts cause a significant increase in the part in areas far from the point of impact.

Note. Such structurally weak areas include empty spaces between welds, side members and other elements where free mutual movement of metal sheets is observed.

Several ways to check the body for deformation

You can determine the deformation of a body that has been in a moderate accident at first glance. On the contrary, if the blow was weak, then it can be extremely difficult to determine the damage by eye. In this case, you have to carefully carry out diagnostics, measure compliance, and so on.

A hydraulic jack helps to carry out an initial inspection of the car. Thanks to the lift, you can examine the condition of the floor, feel those parts of the body that are inaccessible for inspection with the normal position of the car, for the presence of folds. After detecting the latter, as a rule, they are marked with a marker, which makes it possible to easily find deformed areas during subsequent stages of work.

If such a check does not give any results, proceed to the next stage of the examination, which involves checking the wheels. It is no longer a jack, but a special stand that helps carry out the check. Using such equipment, it is easy and faster to carry out the second stage of diagnostics. Check the front and rear wheels of the car at control points using calipers with a special profile shape.

Checking the compliance of the control points of the “shoes” of the car involves verification (comparing) the wheel coordinates located on one side of the car with the coordinates on the other side. Body deformation becomes obvious if measurements show significant deviations from specified standards.

Another method of diagnosing damage to the “tens” body is to compare the diagonals. The exact coordinates of the main diagonals are given in the table below. This diagnosis is considered the most correct, since it is carried out using a symmetry check.

Modern technologies make it possible to check body geometry using various tools. A computer on which appropriate measurements are carried out helps a lot in this matter. The option of checking using template tools and mechanical measurements is also used.

As a rule, at home on a VAZ 2110 you can remove the geometric dimensions of the body yourself using a standard tape measure. But at the service station, a special telescopic ruler is already used for the same purpose, which gives more accurate results.

But both of these measurement methods have a significant drawback. Thus, they do not make it possible to measure spatial deformations. The latter can only be diagnosed using template or computer methods. This will give a complete picture of the deformations, which will allow the damage to be eliminated most effectively. Although, the price of such a check will be many times higher.

The car body is an intricate and complex structure that has a number of values ​​required for normal operation. Their violation causes significant deviations, the configuration of the entire body changes. By measuring the geometry of the body, the car owner has the opportunity to detect even the most minor defects, which can lead to big problems in the future.

Pros and cons in comparison with classmates

The car moved to another class and began to look much more representative and outperformed its classmates in terms of price-quality ratio.

The galvanized body has eliminated many corrosion problems, and the quality of the interior trim has improved. The car has become more economical thanks to improved aerodynamics and engine refinement, as well as a changed ratio in the main pair from 3.9 to 3.7. In addition, changing the ratio in the main pair significantly reduced the noise level of the gearbox. It has become possible to install many useful options, both in terms of vehicle safety and increased comfort.

Price and availability of spare parts, as well as inexpensive maintenance and repairs at any service center.

The crash test confirmed the developers’ assurances about increasing the “survivability” of the body; in the event of a frontal impact, the interior area remains without any significant deformations.

The disadvantages include: loud engine sound, build quality, quality of plastic used. Unresolved problems with the clutch cable.

Repair

As already said, it is prohibited to drive a car in the evening or at night if the side lights are not on, so we will look for the cause and then eliminate it.

If you are sure that the paths through which electricity passes are in good condition, the first thing to do is check to see if the lamps have burned out. And if they need a replacement, do it.

For the head lamp, the replacement procedure is as follows:

• Open the hood;
• We disconnect the battery, or even better, remove it. After all, we are talking about electricity, which is unsafe;
• From the engine compartment, holding the lamp with your hand, disconnect the wires directly going to the light bulb from the block;
• Remove the rubber cover;
• We move the latch to the side, disengaging the spring from the hook;
• We take out the size bulb;
• We replace it with a new one and put everything back together.

When the replacement is made, we check whether the head lamps are on.

Light bulbs in the rear dimensions on a VAZ 2110 are installed as follows:

• We de-energize the car;
• From the trunk (open) side, remove the contact part of the rear light with lamps. To do this, you need to release the latches;
• Remove the headlight bulb and replace it with a new one.

Do not forget that you cannot touch the halogen lamp with your bare hands. Replacement must be done with gloves. The fact is that dark spots will appear where you touch the light bulb. In addition, it has been proven that such a light bulb burns out much faster.

Car history

In addition to the fact that the body of the Lada of the tenth family had smooth lines and was not at all similar to the body of the already boring “99th” model, the 110th model was able to introduce an abundance of new elements that had not previously been seen on vehicles produced by the Volzhsky Automobile Plant. Among the innovations are the presence of an adjustable steering wheel, glued windows, gas hood supports and air conditioning.

After they began installing a sixteen-valve power unit on the VAZ-2110, it became clear to everyone that “it’s better not to joke with Tazami,” since the car could even leave some foreign cars behind. The “Ten” was produced with three versions of equipment: standard, norm and luxury. Despite the stoppage of production of the VAZ-2110 in the Russian Federation, the model is still produced in Ukraine today as the Bogdan 2110.

Work on the design of the dozen began back in 1983. The very first car of this class was supposed to be a sedan with a rear-wheel drive layout. But the developments were never able to reach their own finish line. A little later, the company decided to start developing a vehicle on the VAZ-2108 platform.

However, the cost of this machine was exorbitant, so the developers decided to freeze this project as well. Over time, all the developments resulted in the VAZ-21099 car. At the first time of production, the car came with a carburetor power system, and after 2000 they decided to install distributor fuel injection (injector).

Body geometry of VAZ 2110 and 2112

VAZ 2110 cars that leave the factory assembly line have clearly verified body dimensions

However, few people pay attention to them when buying. As a rule, a driver begins to become interested in the dimensions of the body of his car in the following cases:

1. There are plans to buy a car of this brand second-hand, but the buyer wants to make sure that the vehicle has not been in an accident before. Body geometry will help answer this question.
2. The driver himself got into an accident. This could be a collision with another vehicle or a tree, curb, wall, etc. Body repair materials will be needed. In addition, the driver will need to select tools (for example, find out the dimensions of the slipway for body repair).

Factory dimensions

To accurately find out the dimensions of the body, it is enough to carefully study the vehicle’s operating instructions.

Length

The geometry of the VAZ 2110 body is described in the operating instructions. The main parameters for checking body geometry are as follows:

1. There should be 4.265 meters between the extreme points of the front bumper and the rear bumper.
2. The distance between the center of the front wheel and the center of the corresponding rear wheel is 2.492 meters.
3. The distance from the center of the front wheel to the end point of the front bumper is 0.829 meters.
4. The distance from the center of the rear wheel to the end point of the rear bumper should be 0.944 meters.

The height of the car is always stationary - 1420 mm

Width

1. The distance between the end points of the side mirrors is 1875 mm.
2. The distance between the front end points of the car (excluding side mirrors) is 1680 mm.
3. The distance from the center of the right front wheel to the center of the left is 1400 mm.
4. The distance from the center of the right rear wheel to the center of the left is 1370 mm.

When measuring the body geometry, remember that the body geometry of the VAZ 2112 differs in many places from the VAZ 2110.

Geometry check

Here are four main types of measurements that will allow you to make sure that the car has not been in an accident and has the parameters you need:

Reconciliation of diagonals. Before proceeding with detailed calculations, you should make two simple measurements that will immediately identify the problem. The car needs to be measured diagonally on both sides. If the measurement results coincide (with an accuracy of a millimeter), this will mean that the body as a whole has the correct shape. But we should not stop at these two dimensions. Checking the height of the racks. For this measurement you need to measure the height of the racks in four places

It is important to take measurements from the front and rear, as well as from both sides of the machine. The four indicators must match. Identification of a distorted roof plane

To find out if your car's lid is in place, take measurements from the door diagonals. You need to measure from the bottom rear corner of the door to the top front corner, and vice versa. If the indicators coincide on both sides, good. Just in case, it’s worth checking the roof diagonals.

1. Determining the correct location of the front glass. Contrary to popular belief, even if the windshield fits correctly, its geometry can be distorted. Therefore, be sure to compare the lengths of the diagonals of this part.

As a rule, problems with mismatched machine parameters arise after road accidents. However, this does not happen 100% of the time.

Welding or other repairs that involve heating the metal can affect the physical parameters of the vehicle. Therefore, each time take the above measurements after the car has been to the auto repair shop.

Factory dimensions

All linear dimensions of the VAZ 2110 body can be found by looking through the instruction book or rummaging around on the Internet.

But the main dimensions are:

• if we take the end points of the front and rear bumpers, then here we have 4265 mm;
• length between the centers of the front and rear wheels, the so-called. wheelbase is 2492 mm;
• from the center of the front wheel to the extreme point of the front bumper - 829 mm;
• from the center of the rear wheel to the end point of the rear bumper - 944 mm.

The height of VAZ 2110 is 1420 mm.

Factory dimensions for length and width

• in front at the extreme points of the “factory” mirrors – 1875;
• front excluding mirrors (purely hardware) – 1680 mm;
• distance between the centers of the front wheels – 1400 mm;
• the rear of the car has a width between wheel centers of 1370 mm.

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise that working from a phone is much more convenient. Download here.

Read more: The coolest car in the world 2018

Deformed areas of panels are straightened, as a rule, manually using special tools (metal, plastic, wooden hammers and various mandrels) and devices. Straightening with heating is used for upsetting (pulling) highly stretched surfaces of panels. To prevent sudden swelling and deterioration of mechanical properties, the panels are heated to 600-650°C (cherry-red color). The diameter of the heated spot should be no more than 20-30 mm.

Additionally, you can download the electronic document in PDF format “LADA CAR BODIES, technical requirements for acceptance for repair, repair and release from repair by enterprises of the service and sales network of JSC AvtoVAZ” (Password for the archive: lada2111.ru).

In this guide you can find:

• Dimensions of openings and clearances of mating body parts of VAZ 2110, 2111, 2112 and 21123
• Engine and suspension mounting points on VAZ 2110, 2111, 2112 bodies
• Requirements for the painted surface of a repaired body
• Classification of body distortions
• and much more

By the way, the geometry of the VAZ 2110 and Priora bodies is the same. After restoring the geometry of the body, it must be painted. Read how to do it yourself.

Have you ever used the geometric dimensions of a VAZ body?

The geometric dimensions of the VAZ 2110 body may be violated if the car has been in an accident. A car accident may involve the crash of two vehicles colliding together, a collision with an obstacle, or a wheel falling into a hole. From the article you will learn how to measure the geometry of a “ten” body, what methods allow you to give an accurate conclusion about deformations and damage, and much more.

Hidden body cavities and their processing

The geometric dimensions of the VAZ 2110 body may be violated if the car has been in an accident. A car accident may involve the crash of two vehicles colliding together, a collision with an obstacle, or a wheel falling into a hole. From the article you will learn how to measure the geometry of a “ten” body, what methods allow you to give an accurate conclusion about deformations and damage, and much more.

Let's make a small conclusion

This budget Ukrainian car on the secondary market costs up to two hundred thousand. An economical option for a first car to learn how to drive. It’s possible even for a student to save without loans. Easy to use. There are no difficulties in driving this car. Of course, there are many shortcomings, but again, in order to learn how to ride, it will do just fine. It can also serve well as a family car for retirees; compared to other cars, this car is quite economical. This is one of the most profitable cars in its class.

Causes of breakdowns

There can be many reasons for malfunctions. The most common problem is that the lamps burn out, which naturally makes it impossible to turn on the side lights. Lamps brought to us from the Middle Kingdom are especially unreliable in this regard.

Although they are attractive at a more than “democratic” price, and there are plenty of them at any retail outlet, you won’t be able to get away with them. Therefore, perhaps we should remember the saying that we are not such rich people as to buy cheap things twice.

Good branded light bulbs will last many times longer, and you won’t have to change them endlessly.

Lamp options for dimensions

Sometimes there is a “flashing” of the dimensions, or the blinking of the instrument panel lighting when the side lights are turned on. Many blame the size relay for this, but they cannot find it. In the carburetor VAZ 2110 there is no size relay, there is only a relay for high and low beam.

For a fuel-injected car, the relay should be found in the mounting block, where all the fuses are located. Moreover, if the relays burn one after another, you should immediately contact electrical specialists, because this indicates that there is a short circuit somewhere in the circuit, and from here it is not far from the burnt-out car.

Mounting block and relays and fuses

Never, under any circumstances, should a blown fuse be replaced with a more powerful one, or even with a “bug”.