Installing a trunk opening button on a Lada Granta liftback

Opening the trunk from the passenger compartment.

First you need to open the back door of the car.
After this, you should throw away the seat and fold the backrest. If there are items in the luggage compartment, they should be removed. Before climbing, you need to take with you a socket wrench - an asterisk and a long screwdriver. In order to see the opening mechanism, you need to move the trim away from the body element. It will not be possible to completely remove it with the door closed, because the trim is attached to the base using several screws and latches. It is also necessary to remove the screws using a wrench. Two of them are located in the upper corners of the panel, and 2 more fasteners are located in the handle itself, located on the trim. This manipulation should be done from top to bottom. After the trim is pulled back, you can see a wire lever mounted vertically under the electric windshield wiper. To open the lock, you just need to press the lever with your hand from above and push the lid. After opening the door, you should completely remove the trim, dismantle the lock and start diagnosing it. Maybe you can fix it yourself.

If the drive is electric

Despite the reliability of the electrical lock mechanisms, manufacturers play it safe. The set of car keys on the key fob also includes a mechanical opening key in emergency situations. It is advisable to make sure that it is available when purchasing a vehicle, otherwise you will have to contact the dealer again.

A car, like a construction site, is not a place for ill-conceived experiments. The smallest shock is the loss of the warranty, and the biggest one is that errors can even jam the trunk lid. Don’t hesitate to repair your damaged trunk lock, because there are many people on the road who want to profit from other people’s property.

The best prices and conditions for the purchase of new cars

lada granta trunk button does not open but it can be opened differently.

Most of the thefts occurred due to the breaking of the door or trunk locks. But sometimes hacking also serves to benefit people who, for some reason, left the key in the trunk and cannot open either the doors or the trunk lid. In this article we will tell you how to open the trunk if it does not open.

READ Replacing Granta rear brake pads with ABS

Granta luxury trunk release button does not work

The trunk release button does not work in a Granta luxury car. Voltage is supplied to the button. I took the button apart and cleaned it just in case. The button is dry, the contacts are all intact.

I first looked at where the power goes to the button. It fits along the corrugation into the large corrugation of all the electrical wiring inside the torpedo.

Where to dig? The reason is most likely in the driver's door lock, since it is responsible for the central locking and all other doors in the car. I am writing about luxury. I solved the problem by installing an add-on. actuator via a relay.

Malfunctions of the ignition switch LADA “Granta”

Ignition switch failures can be divided into two types: electrical and mechanical. Electrical faults include malfunctions of the contact group of the lock, as a result of which individual energy consumers (most often the starter) or the entire Granta electrical system as a whole stop working. This also includes a breakdown of the car's immobilizer. Mechanical malfunctions occur due to breakdown of parts of the ignition switch or contact group, as well as physical wear of the contacts. This also includes cases when, due to poor contact, heating and melting of the plastic parts of the contact group occurs. Signs of a malfunction in the ignition switch of the LADA Granta:

• the key does not turn;
• when turning the key the ignition does not turn on;
• The starter or other electrical appliances do not work.

The last two signs do not necessarily indicate problems specifically in the ignition switch, but they certainly appear when the contact group is faulty.

To eliminate the malfunction, it is necessary to replace the LADA Granta ignition switch or part of it, for example, a contact group.

What is needed to replace the Granta ignition switch

To replace the ignition switch you will need:

• key to 10;
• a thin chisel and a hammer (or a drill with a drill bit to drill out bolts with self-cutting heads);
• screwdriver;
• new ignition switch LADA “Granta” or contact group.

Features of opening the trunk of the Lada Kalina

Owners of the LADA Kalina car are almost unanimously surprised: with all the bias towards Europe, the trunk lock of the Kalina hatchback in the basic configuration for some reason can only be opened with a key. For many, the situation immediately became quite common: the driver gets into the car, starts the engine and then remembers that he needs to put something from the passenger compartment into the trunk . Further actions are similar to a joke.

You need to turn off the engine, remove the key from the ignition, get out of the car, and so on. If you imagine all this in an environment of time shortage, one can only feel sorry for the owner. In addition, if someone happened to approach the trunk of a car with something heavy in their hands, the procedure for opening it with a key turned into something difficult. Another problem could have arisen: in regions where real frosts occur in winter, the lock cylinder would at times freeze tightly.

What’s interesting is that any car owner sees a separate button on the Kalina key, which for this brand of car replaces the standard key fob. She's supposed to open the trunk . If you press and hold such a button for a couple of seconds, you can hear a click - this is a signal that everything is in order with the electrical package control unit.

Then another interesting detail became clear: the craftsmen who climbed under the trunk trim to understand the internal structure realized that there was still a place for the lock activator and even a standard electrical connector for wires. And then the same craftsmen began to solve the problem of how to modify Kalina to increase the comfort of use. The complete trunk lock drive is not available for sale as a single set, so the parts will have to be obtained separately.

READ Replacing VAZ Granta rear pads

About the features and disadvantages of the liftback trunk

Practice shows that it is not possible to place a subwoofer in the trunk without the risk of damaging it, although the volume of the trunk allows it. Therefore, it is recommended to choose practicality over excessive aesthetics.

You can open (unlock) the trunk, or rather its lid, by pressing a specially provided button on the key. It opens with your hands up, so there is a high probability of getting your palms or clothes dirty. In addition, there is one minus - when we forget the key in the ignition system, we definitely have to go back for it.

The owners of the Lada Granta liftback described the luggage compartment handles as impractical, their design similar to recesses. They can also be seen thanks to the photo. The compartment lid slams shut silently, which prompts you to re-check whether the trunk is closed. The fifth door of the LADA Granta liftback will disappoint you with its heaviness, which is why you have to push it up when opening it.

When the button (in the cabin) is activated to open the trunk (not included in the standard version), the lid will not close, causing the lock to malfunction. To do this, you need to press the button again to return the lock to its original position, which will allow the lid to close.

According to the president of AvtoVAZ, the Lada Granta liftback has a more progressive design, which allows expanding the functionality of the car through a two-volume body structure. Based on the fact that advertising videos from the manufacturer hint at the stylish and sporty notes of the Grant, youth become the priority target audience for this model.

It’s not always stylish, rich and beautiful – it’s convenient! Although you can “turn a blind eye” to the minor shortcomings of the Lada Granta liftback. This is how the exterior turned out: tolerate it or buy it – it’s up to each individual to decide.

https://youtube.com/watch?v=6P24JY_3CmE

The trunk is wide enough, and the trunk volume is impressive, which cannot but please summer residents. You can see this from the photo. The silhouette of the hatchback is more rapid and sporty in comparison with the sedan. It is very difficult to design a spacious trunk if there is a limiting factor - the existing wheelbase. Therefore, this decision led to the shortcomings of the model described here.

Financially, Granta looks preferable to its competitors. It will appeal to people who want to travel in comfort, because it can fit almost half of the essential items for recreation, thanks to the size of the trunk, because its volume in liters is impressive. In this case, the LADA Granta liftback is doomed to success. This model is a significant step in the development of the domestic auto industry, which is a reason for pride among compatriots.

• https://xn--80aal0a.xn--80asehdb/do-my-self/repair/repair-lada-granta/4773-kak-vypolnit-diagnostiku-zamka-dveri-bagazhnika-lada-granta-liftbek.html
• https://litezona.ru/lada-granta-ne-otkryvaetsja-bagazhnik-s-knopki/
• https://prodemio.ru/lada-granta-liftbek-kak-otkryt-bagazhnik/

Installation of the locking device drive

Removing the fifth door opening button is the easiest thing. It is more difficult to seal the remaining hole. This can be done using a special putty. One of the tricks is to process the hole cavity so that the surface becomes as rough as possible. This will create optimal adhesion to the putty. Next comes sanding, priming and painting. The work can be done independently without special training and practical skills. After that, you don't have to worry about aesthetics.

Of course, all dismantling work can be carried out only after the installation of the electric drive is completed, as well as the installation of the trunk opening button in the cabin. The trunk lock drive and how to install it are all relatively clear. Both the location and the connector of the wires in Kalina are predetermined for this.

But where to install the button will have to be decided by the owner himself. The two most popular places are the dashboard in front of the gear shift and the driver's door. The first method is convenient because the button can be reached from almost anywhere in the cabin. The button on the driver's door is primarily a convenience for him.

Once the location for installing the button has been selected, it is time to install the electrical wiring. About 4 m of wire will be required. The connection point is located under the rear seat. The connection is made to connector 13, it is signed, so searching will not cause any difficulties. The work can easily be done independently. Thus, it became clear how to make a trunk lock drive.

How to open the trunk on a station wagon, sedan and convertible

Let's start with the simplest thing - these are station wagons. A station wagon is a car body that has a closed design. The luggage compartment in such a car has a common roof with the car interior. This suggests that you can get into the trunk of a car through the interior of the car. To do this, you need to remove the top shelf and the trunk will be within a meter of the driver’s hands.

If dismantling the rear parcel shelf is not provided for by the design of the car, then there are probably locks that hold the back of the rear seat. So, for example, on the VAZ 2121 “Niva” you can unfasten special latches and the back of the rear seat will move forward. This way you can take the keys from the trunk without opening it.

This method becomes relevant for the latest model of the VAZ 2121, since the first SUVs of this series had a special button on the trunk lid designed to open the trunk without the participation of special levers in the cabin or the car key.

CAUTION FACTORY DEFECTIVE TRUNK LID LADA GRANTA FL 2019

In the case of sedans, everything is much more complicated. This is especially true for older cars that do not have a special trunk release button. In the classic VAZ family of the fifth and seventh models, as well as the Fiat 124, opening the trunk is possible without using a key at all. The fact is that the lock of such covers is too simple and can be opened with a regular flat-head screwdriver. In this connection, it is recommended to replace the trunk lock with a more thoughtful one in the future. On other models, it is impossible to lock the trunk without a key.

READ How to check errors on Priora

A separate story is the Soviet car IZH 412 Moskvich. His trunk had neither a button nor a special lock. The trunk was locked using a special metal cable located outside under the trunk lid. To open the trunk , simply pull this cable to the right.

Despite the simplicity of the design, there were situations when this cable was bitten off when the trunk was closed incorrectly. In this case, access was lost not only to the trunk, but also to the car’s gas tank, which created additional difficulties when refueling the car. However, you can also open such a trunk . The whole process is complicated by the fact that between the seat and the trunk there are stiffening ribs that block access to the latter. To gain such access, you need to remove the fastenings of the rear shelf under the glass and remove it. Next, you need to reach with your hands the remains of the cable or locking mechanism and open the trunk manually from the inside.

Opening the trunk of a convertible is even more difficult. This is due to the fact that its trunk does not have any connection with the car’s interior and is made separately. To open it, you need to know the lock structure well enough. But in order not to spoil it, it is still recommended to call a specialist.

The trunk of modern cars can be opened without a key from inside the car using a special button for the electric trunk lock.

Methods for installing the trunk lock activator

The first option is to saw off one “tongue” from the Kalina lock. Particularly gifted craftsmen do this without any removal of the lock, right on the spot, using an angle grinder. You have to work very carefully. If you don’t have a grinder, the same steps can be done with a hacksaw. It just takes much longer, and one can only guess about the physical effort required for such a process. If you are not confident in the intricacies of your own work, it is better to remove the lock for modification. In this case, it will be easier to work with both a grinder and a hacksaw.

The second option is to replace the lock. LADA instead of the original one . This option is perfect for those Kalina owners who do not have the desire and/or ability to cut anything. All other steps for installing the Kalina station wagon trunk lock activator are extremely simple.

• A rotary washer is installed on the plastic activator pusher, then the entire system is secured with a locking ring.
• The complete activator is placed in a standard place.
• The activator wires are connected to the corresponding connectors. Naturally, all electrical work is carried out only with the battery disconnected. The point is not what can “knock” an electric current: 12 volts of direct current for a person is just nonsense. But capricious electronics, if something suddenly “shorts”, may suffer. In the best case, problems with functionality will begin, in the worst case, something will completely fail.
• The next stage is installing and adjusting the rods.
• A check is in progress. First, the lock itself, regardless of whether the original one was modified or another one was installed (from Priora). All detected problems are corrected. The activator is being tested.

If everything worked perfectly, then it is quite possible to install the trunk trim in place, if only there were “hedgehogs”. Car owners are advised, since they had to remove the trunk trim, to also check which parts are making noise, knocking or vibrating. If such small problems are discovered, they can be solved by installing plugs from pieces of foam rubber of the required size. This will not only solve the problem with the lock, but also increase comfort when driving the car.

Lada Granta liftback (2019). Guide - part 3

If during a call (while the 3 key is illuminated

SOS" flashes red) initiated

by pressing the 3 " key

SOS", press key 3 again

SOS" and hold for at least 2 seconds, then emergency

the call will be canceled (key 3" backlit

color will be turned off).

The SVEOS is in this mode if no emergency call is made and if the ignition is turned off. In the “Off” mode, there is no backlighting of key 3 “

SOS”, and also the indicator 4 of the system status is not lit.

. In the “Off” mode, SVEOS does not respond to

pressing key 3 "

SOS". SVEOS exit from mode

“Off” is performed when the ignition is turned on.

The testing mode is intended to check the functionality of the SVEOS components. In the testing mode, the functionality of the SVEOS status indicator, the microphone and loudspeaker in the interior lighting unit, the backup battery and other internal components of the SVEOS is checked. If you wish, you can independently check the performance of the SVEOS by running the test mode. To start the test mode, you must: – make sure that the engine is turned off; – turn the key in the ignition switch (ЗЗ) to the “Ignition on” position and wait 1 minute; – turning the ignition off and on three times. After the 3rd switching on of the ignition (switching ZZ No. 6), the SVEOS goes into test mode if the engine did not start during the entry procedure.

In this case, the sound prompt “Testing procedure has started” will be played. During testing, the functionality of the microphone and loudspeaker will be checked. After playing the sound prompt “Say the control phrase”, you will need to say any phrase lasting no more than 5 seconds. Immediately after this, the audio prompt “Playing a control phrase” will be played and then the phrase you spoke will be played. The audio prompt “Enter your verification result” will then play. If testing of the microphone and loudspeaker was successful, then it is necessary to switch the protection zone 2 times according to the algorithm described below within no more than 3 seconds:

Advantages and options for upgrading car locks

Any option for modifying your own car has its pros and cons. It was already discussed at the beginning why exactly it is worth modifying the trunk lock of the Kalina hatchback and station wagon. Now about the possible options. Installing the trunk lock activator alone solves one problem - the issue of using the key. The downside is that when the ignition is on, pressing the trunk open button on the Kalina hatchback and station wagon will not help: the engine will definitely have to be turned off.

True, you no longer have to remove the key from the ignition. That is why the issue of installing a trunk release button for Kalina hatchback and station wagon remains relevant. This modification option has its drawback: you will have to run the electrical wire through almost the entire car. Most car owners are willing to put up with such inconveniences, since they are one-time use.

READ Replacing right-hand drive oil seal Ford Focus 2

The Kalina hatchback trunk lock drive and the issue of modification are a matter exclusively for the car owner. It is possible that it is impossible to independently modify the Kalina hatchback trunk lock, and there is nowhere to turn. In some regions, purchasing a lock for a LADA Priora car can be difficult. According to many motorists, this disadvantage can somehow be put up with.

For particularly skillful car owners, options for controlling door opening/closing mechanisms, including the fifth door, are available. For example, the simplest option is one in which all the doors of the car are unlocked simultaneously. And the most complex option, which is not achievable for everyone, since it requires a somewhat non-standard approach, is that the driver, passenger and fifth doors are controlled separately.

Naturally, the options for modifying the Kalina hatchback and station wagon lock differ in cost, execution technique, and time required for a full range of work. The decision which option to choose is always up to the owner.

We will arrive in 15 minutes or any other time

We will open doors, glove compartments, hoods, trunks, etc.

Let's recharge the battery and start the car

Decent craftsmen with more than 5 years of experience

Electric trunk lid lock for VAZ Granta

Dear customers, in order to avoid mistakes when sending the trunk lid lock with electric drive of the VAZ 2190 Lada Granta, in the “Comment” line, indicate the model of your car, year of manufacture.

The trunk lock 2190-5606010-10 with an electric drive (activator) ensures automatic opening of the trunk lid of the Lada Granta, which significantly simplifies the life of the driver of this vehicle.

The automatic trunk opening function is a fairly new option, the existence of which most car owners of new car models are just beginning to get used to.

The essence of the operation of the activator (electric drive), which makes it possible to achieve such a result, is, in principle, not complicated: when someone presses the corresponding button in the car interior, the trunk lid lock is activated through this part, as a result of which it opens.

It’s a small thing, but it makes life so much easier for vehicle owners, especially during the cold season (the keyhole freezes). This device is compatible with a standard (mechanical) lock, which means that when opening the luggage compartment lid, you can use two methods simultaneously, which, by the way, increases resistance to burglary.

Today, there are two types of drives that, in order to open the trunk lid, bring the rod into working condition - this is a mechanism that has either an electric motor or magnetic plates.

The first is more common, as it is quite practical and durable, and the second, due to the complexity of the design and frequent problems with use, has not gained much popularity among car enthusiasts.

When using a VAZ 2190 Lada Granta trunk lid lock with an electric drive, the luggage compartment can be opened using the remote control key fob button, or using a button mounted in the luggage compartment lid.

The trunk lid lock 2190-5606010-10 with an electric drive for the Lada Granta is certainly a useful and necessary thing, but only if its installation is justified.

Other article numbers of the product and its analogues in catalogues: 21900560601010.

Lada Granta.

Any breakdown is not the end of the world, but a completely solvable problem!

How to install and replace the electric trunk lid lock on a Lada Granta car yourself.

With the AvtoAzbuka online store, repair costs will be minimal.

Just COMPARE and BE SURE!!!

Don't forget to share the information you find with your friends and acquaintances, because they may also need it - just click one of the social networking buttons located above.

Installation of the activator: preparatory work

• 12 volts;
• two-pin;
• lock-unlock functions.

In order for the system to open doors by pressing a button to work fully, one activator will not be enough. You will also need such a thing as a rotary washer. According to many car owners, the easiest way is to grind it yourself. You will need a steel plate and a machine. There are quite enough drawings with dimensions that will show what kind of rotary washer for the Kalina activator should be on various auto forums.

The trunk lid does not open with the button, one of the reasons and solution.

It is possible that after the washer is manufactured, it will have to be modified when installing the activator. The activator installation technique itself will require some tricks. For example, the first step is to remove the trunk trim. It is secured with pistons, which immediately became unusable for most car owners. Conclusion: pre-purchase of “hedgehogs” for subsequent installation of the trunk trim in place is mandatory.

Another nuance lies in the types of locks on the Lada Kalina. Firstly, locks on cars produced before 2010 and after differ in their design. Accordingly, the types of activators will differ slightly. This issue is resolved upon purchase. Secondly, most of those who independently installed the lock activator for the Kalina station wagon either modified the lock itself or replaced it with another one. It remains to figure out why this is needed and how it is done.

The bottom line is that the trunk lock is equipped with two “tongues”. After modifying the lock to open it with a button on the key, the existing problems were partially solved, but a new one arose. If, when opening the trunk with the key button, someone did not support the trunk lid in time, it would lower, as a result the trunk would close again. And only on one “tongue”. And this meant that the key fob certainly became useless. Now it was possible to open the trunk again only with the key. This is where two options for solving the problem appeared.

How to adjust the lock and trunk lid of a VAZ 2114

To adjust the lock on a VAZ 2114 or VAZ 2115, we perform approximately the same steps as in the case of a VAZ 2112. But instructions for adjusting the trunk lid are presented below.

Adjusting the trunk lid can be quite simple, the main thing is to adhere to a certain sequence.

1). First, disconnect the “-” terminal from the battery.

2). Next, open the trunk and disconnect the wires from the trunk lid trim terminals (it is recommended to remove the wiring harness from the trunk cavity).

lada granta trunk button does not open but it can be opened differently.

3). We remove the fastenings of the luggage compartment lining (it is removed together with the license plate illumination).

4). Now we dismantle the lock drives and trunk lid. To do this, unscrew the fastening nuts and disconnect the rod, then remove the drive. Similarly, we also remove the rear door lock itself.

5). Next, disconnect the gas struts, unscrew the lid fasteners (fixed on hinges), and then remove the trunk lid.

6). We apply a special lubricant to the contact parts of the trunk (for example, LSC - 15). We also treat the trunk lock with lubricant.

7). All clearances allowed between the trunk lid and body components must be equal.

That's all, now you can put the structure back together. We perform the same steps, but only in reverse order.

By the way, I would also like to note that the trunk lid can be adjusted in approximately the same way on the VAZ 2112 and VAZ 2109.

READ Where is the LADA Kalina speed sensor located?

How to adjust the trunk lock on a VAZ 2112, 2110, 2111

1). Loosen the lock nuts.

2). Remove the protection cover from the lock.

3). Move the lock in the required direction and tighten the screws.

4). Now we check whether the lock can be easily slammed.

5). If necessary, the adjustment process can be repeated again. But if the lock closes well, tighten the fastening bolts.

If the lock on the body does not fit into the lock on the lid when closing, then loosen the bolts securing it and move it in the required direction, after which we tighten the bolts back.

Preparatory stage

• impact screwdriver;
• cross bits;
• pliers;
• plastic clips in case of damage to the standard ones;
• liquid for removing rust and corrosion;
• a new lock, the modification is chosen individually by the owner.

Procedure for independently replacing the driver's door lock on a Lada Granta Liftback

1. We install the car within the perimeter of the repair area and provide unobstructed access around the perimeter.
2. We take priority safety measures when carrying out work. We fix the rear row of wheels with wheel chocks and engage first gear to avoid arbitrary movement.
3. Open the driver's door, use an impact screwdriver to unscrew the two screws securing the shackle to the car body, and remove it from its seat. We install a new shackle with soundproofing material.
4. Let's start removing the constipation: unscrew the plastic float and remove the stem.
5. We unscrew the car door card, two screws, eight plastic clips around the perimeter.
6. We disconnect the block with wires from the double-glazed window control unit, speakers, and central locking.
7. From the outside, unscrew the three screws that secure the lock body to the door.
8. We remove the two rods, having first disconnected them with pliers.
9. We carry out preventive maintenance, clean the seat, remove old grease, and apply a thin layer of new one.
10. Let's start installing the new lock.
11. We assemble the structure in the reverse order, unless there are other breakdowns that require surgical intervention or elimination.

During the installation process, we pay attention to the integrity of the electrical wiring, insulating layer, terminals, and blocks with wires. If there are signs of wear, replace them with new ones. Do not operate a machine with faulty electrical wiring.

Do not operate the machine with faulty electrical wiring.

Typical door lock malfunctions

• tightness of locking the door;
• increased noise when opening/closing;
• the central lock does not lock the door and does not respond to signals;
• unlocking is accompanied by a creaking, metallic grinding sound;
• While driving, the door vibrates, cracks are visible in the places of contact with the standard seal.

Common Causes of Premature Wear

• failure to comply with the deadlines for technical inspection, preventative maintenance, lubrication, and replacement of worn elements;
• third-party mechanical damage resulting in deformation of the door or lock;
• manufacturing defects at the factory;
• the lock has become loose due to loosening of the fastening;
• violation of the adjustment algorithm;
• human factor: systematically locking the door with force.

The defect is eliminated by replacing the constipation assembly.

Replacing the rear (passenger) door lock

The procedure for preventing locking of the front/rear passenger door is carried out by analogy. The design and method of fixation are typical.

Installing a trunk lock on Lada Granta Liftback

1. We place the car on a level platform and provide access to the trunk lid.
2. We take safety measures when carrying out work.
3. We unscrew two screws and remove part of the lower plastic trim of the trunk lid.
4. Unscrew the two screws securing the lock body to the trunk lid;
5. Using pliers, remove the rod from the button to the body.
6. We remove the constipation, carry out preventive maintenance, lubricate the threads and the rod end.
7. We install a new lock and assemble the structure in the reverse order.
8. We unscrew two screws, remove the standard shackle, install a new one with sound-insulating material.

Replacing the hood lock

1. Inside the car, under the dashboard, there is a hood release lever. We pull it towards ourselves.
2. Release the latch and lift the hood.
3. Using a TORX key set to “10”, unscrew the two screws holding the lock body to the body.
4. Using pliers, remove the cable eye from the seat.
5. We remove the lock, install a new one in its place, and assemble the structure again.
6. Lubricate the bow-clamp with silicone grease/solid oil.

Why the trunk won't close - Auto repair school

Among people living in Russia, there is an opinion that our auto industry creates, to put it mildly, not very high-quality cars. Perhaps this point of view is too biased, but it is an indisputable fact that owners of domestic cars sooner or later have to spend personal funds on car service.

But it is also worth noting the fact that some repair work on domestic cars can be done with your own hands. For example, adjusting the lock or trunk lid, which we will talk about in this article.

What does it consist of?

An electronic key can be made in the form of a classic key with buttons, a key fob or a Smart card. The functionality depends on the brand and level of equipment of the car. Inside the key is a microcircuit that encodes and decodes the signal. To do this, it uses a floating code algorithm, which is considered one of the most reliable today. The antenna is used to receive and transmit encoded signals.

Electronic key Sensor in the door handles Transceiver antennas in the car are necessary to accurately detect the location of the key and exchange information with it. Their location and number depend on the design, overall dimensions and price of the car. Most often, antennas are placed in the front doors and trunk, as well as in the front part of the passenger compartment, to clearly determine whether the key is located outside or inside.

Sometimes additional antennas are installed in the rear doors and near the second row of seats.

Sensors in door handles are necessary to transmit a signal about their closing or opening. The number of sensors depends on the functionality provided by the automaker.

For example, there are three sensors in the driver's door handle of the Audi A6: two capacitive sensors on the inside and outside of the handle are responsible for opening and closing the door, respectively, and the touch button can also close the windows.

How to remove the trunk release

Before removing the retainer, you must remove the trunk trim:

• using a flat-head screwdriver, pry up the plugs and remove them;
• After removing the plugs, remove the luggage compartment upholstery.

Remove the pair of nuts that hold the retainer in place using a socket wrench or wrench.

Please note: behind one of the nuts there is a pair of negative terminals. Shoot more carefully:

• Disconnect the pair of negative terminals.
• Next, unscrew a couple of bolts from the opposite side.
• Use a flat screwdriver to pry up the retainer and remove it.
• Remove the adjusting washers.

Adjustment of the clamp must be carried out exclusively in height using adjusting washers.

Lada Granta fl trunk does not open

The clamp is installed in the reverse order after adjustment.

VAZ 21099 is a car that is not at all difficult to maintain. To do this, you just need to study a few instructions. Even a novice car enthusiast can handle repairs to the domestic automobile industry. Using this article you can fix the trunk lid.

Electric drive installation – remember and reproduce!

To install the electric trunk, you will also need fuse mounts, terminals, electrical wires with a cross-section of 1 mm, electrical tape and a set of tools. Prepare all of these materials in advance to avoid distractions during the installation process. First, remove the plastic trunk trim; this must be done carefully so as not to damage it. It is secured with several bolts and plastic latches. Next, remove your lock; you need to bend one tooth in it so that when it opens, it works with one click.

Some car dealerships, when selling an electric drive, also recommend buying a lock that does not need to be modified - such a proposal is quite reasonable and will save you a lot of time. After manipulating the lock, proceed to laying the wiring. Before performing any wiring work, you must remove the terminals from the car battery. Take power from the car's cigarette lighter, since this element of electronics is the least used and does not consume much load.

To do this, disassemble the central shaft. Install a protective fuse between the cigarette lighter and the electric drive button. This should be done in a convenient place - if it fails, it will be easy to replace. You can install the trunk release button where you like. Next, according to the diagram that comes with the electric drive, use electrical blocks to connect the power supply. Laying and installing wiring for an electric lock is best done along the thresholds of the car. The length of the cable you will need is 3.5 meters, cut off the excess.

After this, you can begin the final stage of installing the electric drive mechanism for the trunk lid. There are several ways to install the drive; the best option for us is one that does not require drilling additional holes in the trunk mount. If in your case you need to make several holes, then choose a more convenient place. Take the mounting plate and screw it into an easily accessible place and place the drive on it. The installation of the bar with the drive must be done taking into account the length of the mechanism rod.

It is best to install parallel to the main lock rod. Next, bite off the extra piece of the rod, having previously placed it in the initial position on the electric drive.

After this, proceed to connecting the wires to the electric drive. It is especially important at this stage to observe the polarity of the power supply. To do this, connect the wires according to the instructions in the diagram. If connected incorrectly, the mechanism's motor will run in reverse and your lock will not open. Also install a fuse in front of the electric drive lock; this will protect you from damage to the mechanism. Carefully wrap all electrical wiring connections with insulating tape or use special heat shrink.

How to open the trunk if the lock is broken: simple methods ⋆ CAR WORKSHOP

Many car enthusiasts are concerned about the question of how to open the trunk if the car lock is broken. Currently, there are several of the simplest and most effective ways to solve this problem without involving expensive specialists from repair shops.

The main reasons why the trunk does not open:

Clogged mechanism (dirt flying out from under the wheels while driving is often the cause of failure of the car trunk lock)

Failure of the electric drive (the electric drive is responsible for activating the latch of the locking mechanism)

Mechanical failure (failure of the locking mechanism - in this case it will not be possible to open from the outside)

Oxidation of contacts (a diagnostic scanner will be required to identify the breakdown).

If all attempts to open the luggage compartment from the outside are unsuccessful, you need to use access from inside the car.

Sources:

https://avtotop.info/lada-kalina-ne-otkryvaetsja-bagazhnik/ https://chinzap.ru/uhod-za-avtomobilem/pochemu-ne-zakryvaetsya-bagazhnik.html

Ways to open the trunk without a key

There are several similar methods. The choice in favor of a particular one depends on the vehicle configuration, the lock mechanism and the manufacturer. Let's take a closer look at them.

From the inside

We are used to hearing the phrases five-door hatchback, three-door sedan. But it doesn’t always occur to you that the outermost odd-numbered door is intended for the luggage compartment. In an emergency, you need to fold down the rear seats and get into the luggage compartment of the body. Use a flashlight or touch to explore the door. Stumbled upon a pen? Open it with confidence.

Car trunk lock mechanism